Resume - Over 30 years of experience in refineries as craftsman, mid-level supervisor. S...

Misco Jobs

Resume #3168

CONTACT INFORMATION:
View contact information...

Summary

Over thirty years experience covering all aspects of construction and maintenance project management and supervision, including budgeting, planning, estimating, scheduling, and monitoring. Particular experience and skills in:

* Project planning
* Turnaround management and supervision
* Contractor – client liaison
* Working in concert with design engineers
* QA/QC procedures and techniques
* Safe work practices

A proven track record of completing projects on schedule and within budget. Capable of introducing new practices and procedures for clients, resulting in considerable efficiency gains and cost reductions.

Professional Experience

Plant Maintenance, Inc. July 1, 2002 thru September 17, 2002
BP Terminal – Richmond, CA
Jet Fuel and Vapor Recovery Project
As project superintendent - responsible for overall construction of new jet fuel filtration equipment and piping, and replacement of an existing vapor recovery facility. Coordinated the efforts of civil and electrical subcontractors.

S.W.A.T Enterprises October, 1999 thru June, 2002
Chevron Refinery – Richmond, CA

Phase II – High Tech Burners April, 2001 thru June 2002
Acting as field installation representative of innovative fuel gas burners (a collaborative product of Chevron, John Zink, and Calidus). These new burners have been installed in a ll remaining Chevron-Texaco furnaces and boilers, eliminating the need for future SCR's.

Butamer Project (Simultaneous to NOx Reduction Project)
Represented Chevron as maintenance representative for PDS modeling review of future Butamer facility. Acting as client representative of off plot piping for fabrication and installation of piping of a Butamer Plant (MTBE substitute). To date, I have assisted engineers and pipe designers and have saved the dlient many thousands of dollars by conceiving of eliminating a nitrogen storage facility and better off plot piping routing.

NOx Reduction Project March 2000, thru March, 2001
Phase I – Selective Catalytic Reduction Unit (SCR)
Hydrogen Manufacturing Unit A Furnaces
Acted as contractor – client construction representative and inspector of piping hydrotests, duct work construction, anhydrous ammonia injection skid, induced draft fan, and 100 foot stack, and catalyst loading. Represented client at vendor facility of 10-foot guillotine in Maine, and ammonia injection skid in Texas. The second SCR was not installed however.

TKN (Isomax) Fire Restoration October, 1999 thru February, 2000
Inspected piping fabrication versus P&ID's and isometric drawings. Inspected hydrotests and restorations of piping systems.

Koch-Glitsch Field Services November 30, 1998 thru December 18, 1998
Field Engineer
Exxon Refinery - Benicia, CA
Designated isolation points, provided isometric sketches and prepared piping repair procedures for Koch-Glitsch field services for FCC unit turnaround in January, 1999.

Pro-Tech Engineering, Inc. September 13, 1998 thru September 30, 1998
Turnaround Foreman-Piping
Equilon Refinery - Bakersfield, CA
Gave work direction to piping crew at SRU and diesel units involving the isolation, repairing, and hydrotesting of piping and plant equipment.

S.W.A.T. Engineering Group July 1, 1998 thru September 11, 1998
QA Inspector
Chevron USA Inc. - Richmond, CA
Phase Two- Piping- Base Oil 2000 Project
Responsible for inspecting fabrication, installation, and hydrotesting of piping.

S.W.A.T. Engineering Group February 2, 1998 thru June 15, 1998
Project Coordinator/QA Inspector
Chevron USA Inc. - Richmond, CA
Base Oil 2000 Project Tanks

Tanks: * Inspected civil work of tank foundations.
* Inspected tank construction for seven tanks.
* Inspected installation of primary and secondary leak detection systems.
* Verified tank hydrotests and vacuum box tests.
* Negotiated "extras".
* Coordinated construction sequences between tank construction contractor and civil, piping, painting, insulation contractors.
16" Regular unleaded line: * Performed QA inspections on 3000 feet of piping construction and installation.
* Negotiated "extras".

T.C. Inspection Inc. January 5, 1998 thru January 31, 1998
QA Inspector
Chevron USA Inc. - Richmond, CA
Phase One- Piping- Base Oil 2000 Project
* Inspected fabrication of piping, assuring accuracy and proper valving.
* Inspected installation and hydrotests of piping.

S.W.A.T. Engineering Group October 13, 1997 thru December 3, 1997
Construction Consultant/QA Inspector
Chevron USA Inc. - Richmond, CA
W.D.O. #1 LF Drainage Project
A 3,000 linear foot friction pile supported drainage system that included carbon steel and HDPE piping.
* Provided QA inspection of pile driving, verifying tip elevations, pile cut offs, and pile capacities attained.
* Inspected laying of asphaltic concrete in 2" lifts.
* Inspected hydrotests of piping.

Mitchell & Simmond Ind. Services Inc. April 13, 1997 thru September 4, 1997
QA/QC Inspector
Chevron Chemical - Port Arthur, TX
Ethylene Unit 1544 Expansion Project
* Inspected and approved hydrostatic tests and post-test piping system restoration.
* Assured compliance with piping system specifications, metallurgy, installation, and fabrication.

Pro-Tech Engineering Inc. February 18, 1997 thru April 10,1997
Project Coordinator -Areas 2 & 3 Turnaround
Tosco Refinery - Trainer, PA
Units: Diesel HTU, Lowline Gas Compression, and Sunoline Gas Compression
* Dove-tailed activities by non-bid companies with those of firm bid contractor.
* Inspected work quality of all contractor companies involved on the project.
* Negotiated "extras".
* Conducted job safety inspections.

Pro Tech Engineering, Inc. September 30, 1996 thru October 21, 1996
Texaco Refining and Marketing Inc. -Bakersfield, CA
Project Coordinator -Area 3 Turnaround
Delayed Coker Unit, Sulfer Recovery Units, Waste Water Hydrocarbon Recovery Unit, and Boilers
* Coordinated daily contractor / client turnaround activities.
* Secured all required work permits daily.
* Inspected quality of contractor workmanship.
* Monitored contractor safe work procedures.
* Inspected all repairs and approved all equipment closures.

Chemical Design Company October 1, 1995 thru December 1995
QA/QC Inspector -FCC Modernization Project
Chevron Refinery -Richmond, CA

Piping: * Inspected piping fabrication, installation, hydrotests, and post hydrotest restorations.
Spring Hangers: * Inspected the installation of spring hangers and spring cans, and monitored performance.

Consultant - DJA Consulting February 1995 to April 1995
Castrol Inc. - Richmond, CA
Project Supervisor - Piping Expansion Project GF-2
Coordinated and supervised all crafts. Secured all required permits; coordinated work plan with operations. Project included: pumps, piping tie-ins and hydrotesting piping.

Consultant - DJA Consulting July 1992 to November 1994
Unocal Refinery - Rodeo, CA
Acting as budget estimator, QC liaison, and special projects coordinator.
Estimated and prepared annual budget requests for "Wet Fluorescent Magnetic Particle" testing, "Buildings and Grounds", "Roads and Bridges", painting, and asphalt repair projects.
Noteworthy accomplishments:
* Client's maintenance bid specifications were completely revised and rewritten
* Introduced competitive bidding for asphalt repair and painting projects
* Conducted bid meetings and bid walks
* Conducted QC during project execution
As a result of competitive bidding on painting and asphalt projects, client achieved an immediate savings in excess of 25%.

Kelly Services May 1992 to June 1992
Piping Projects Coordinator and QC Supervisor on FCC Turnaround
Chevron Refinery - Philadelphia, PA
Responsible for piping systems fabricated and installed during a scheduled FCC Unit Turnaround. Designed and specified piping, and witnessed hydrotests. Coordinated turnover to operations.

Career

Chevron Refinery - Richmond, CA May 1961 to October 1991
Supervisor 20 years
Planner/Estimator
In each of 4 Maintenance Divisions, estimated and planned all incoming daily work orders, scheduled crew, ordered materials and coordinated job scheduling with operations.

Zone Supervisor - on-line facilities
In each of Chevron's process divisions including Utilities Divisions and Environmental Operations Division: Estimated work orders, ordered materials, scheduled required manpower, coordinated the release of equipment with operations, obtained required permits, supervised repairs by all craft disciplines, turned over repaired equipment to operations, and monitored start up. Conducted and documented weekly safety meetings.

Turnaround Supervisor - all refinery units
Estimated portion(s) of turnaround, ordered material and equipment, planned and scheduled manpower needs by craft. Scheduled work execution, obtained necessary permits, supervised repairs, coordinated work plan to avert bottlenecks and choke points, monitored progress and performed QA/QC tasks, coordinated return of equipment back to operations. Prepared final project documentation.

Project Manager
Assembled supervisory staff. Planned turnaround execution. Scheduled manpower and equipment. Monitored turnaround progress through progress meetings and adjusted manpower as necessary.

Refinery Field Construction Group - Bid Work-Liaison
Conducted bid meetings and bid walks. Provided Liaison and QC functions on new construction projects i.e. pump stations, piping, foundations, equipment installation.
Turnaround Planning and Contracts Group-Planner
Coordinated pre-turnaround meetings with maintenance and operations representatives for finalizing turnaround projcet work letter (check lists). Conducted and documented critique of turnaround upon project completion. Prepared bid specification packages for lump sum bid boiler turnarounds.

Education

High School Graduate
Chevron sponsored extended management programs through Contra Costa Community College.
Management Training courses provided at Chevron Refinery Richmond.
Chevron Management Seminars conducted off site.

Special Training and Skills

Pipefitter Apprenticeship (3 years) including classes in:

* Metallurgy
* Boilermaker Training
* Concrete foundation construction
* Structural Steel Construction
* Blueprint interpretation - orthographic and isometric
* Sketching - Orthographic and isometric
* Hazardous chemicals, acids, H2S
* Hazardous waste remediation and management
* General Safety

SECOND LANGUAGE:

Spanish - native tongue, fluent

A current passport is maintained for foreign assignments.
Professional and personal references are available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6551 to 6600 of 15508)

Go to Search Parameters...

Brief Description

Project Manager with over 35 years of experience in the construction industry, which offers an extensive and diversified array of industries such as power generation, pharmaceutical, semiconductor, large office facilities, pulp/paper and plastic projects, coal gasification and others.

Proven ability in Purchasing, Expediting, Procurement QA/QC Coordinator, Material Control, Material Coordinator, Logistics and Warehousing. Developed and implemented Material Control and Warehouse Procedures. Proficient in SAP, MS Word and Excel. Bilingual, fluent in English and conversational Thai.

39 years experience in mining , open cast and underground . administration , planning operation including safety.

29 years oilfield experience from roustabout to site manager.

i have over 20 years experience in the oil and gas industry of which have been in the materials/logistics role

Extensive electronics/instrumentation installation, troubleshooting and repair of subsea control systems. This was analog/digital to the component level; this was accomplished on systems controls and computer monitoring , and subsea modules to the board level repair.

20 years + WSS, proficient in Completions (Land, Platform, Sub Sea, Tender, Jack Up) also single, duals, electronic, Wireline, Coil Tubing, HWO. Service Industry background (Otis and Baker Oil Tools). Current contract finishing Sept. As per CV, willing to work in all countries.

Over 25 years of experience in projects related to mechanical process, material handling and mining. Experience in field engineering, construction, and preparation of conceptual and detail drawings, material take-offs and cost estimates.

ONSHORE-20 Years. Set-up and supervise Mechanical Operations & Maintenance duties. OFFSHORE PLATFORM-4 years. Oil & Gas offshore Platforms Maintenance instruction to Maintenance staff. Identify and control all replacement spares and equipment of all offshore plant and equipment.

Highly motivated and results-oriented professional with exceptional leadership and interpersonal skills with an extensive background in construction industry.

Application for the post of Electrical Supervisor

A competent Chartered Mechanical Engineer with over 14 years experience, gained in Aluminium, Iron & Steel, Nuclear & Petrochemical Industries. Worked in areas of Design, Construction, Installation, Projects, Commissioning, Overhead Cranes and SAP.

A highly experienced and reliable Operations Superintendent with 24 years offshore experience. An enthusiastic team member possessing a good sense of humour, capable of working on own initiative, with the ability and willingness to train and develop new team members.

25 years of experience in Production, Drilling, training and administration and costs control

To lead extra heavy oil production optimization; lifting, transporting, liquid-gas separation, pumping, dehydration, desalting and distillation. Coordinate, supervise and implement commissioning, maintenance and budget. To prepare economic evaluations. To implement and audit Iso-9002 systems.

Over 22 years experience in oil & gas production, plant management, maintenance supervision, environmental & safety, loss control. Extensive knowledge of oilfield technology. Available for immediate employment.

Piping/Mechanical Superintendent

Objective: A self-starting, highly motivated team player looking to contribute to the goals and advancement of an organization through Health, Safety, and Environmental services.

Structural Engineer, PE, with 14 years experience. My experience is in the following industries: Heavy Construction, Petroleum/Oil and Gas, Pre-engineered metal buildings, Mining

To work Overseas

System Admin for IT Industry.

PIPEMILLS,PLATE MILLS, EXPEDITOR, VENDOR INSPECTOR, TECHNICAL WRITER ON PIPE SPECIFICATIONS QA/QC CO-ORDINATOR,

Over 30 years of experience in refineries as craftsman, mid-level supervisor. Since taking early retirement from Chevron in California, I have taken positions mainly as client field construction QA representative on projects of millions of USD's. Also worked as DBA D.J.A. Consulting.

RESIDENT CONSTRUCTION MANAGER / SUBCONTRACTS MANAGER / CONSULTANT IN CONSTRUCTION OF PETROCHEMICAL PLANTS (SPECIFICALLY HYDROGEN /SYNGAS REFORMERS, ETHYLENE CRACKING FURNACES, PETROCHEMICAL UNITS INCLUDING DETAIL PLANNING AND EXECUTION OF SEVERAL PLANT TURNAROUNDS PROJECTS)

Thirty years experience in the international field of Oil well Drilling

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

A professional mining engineer with 14 years of operations experience. Has well rounded experience in a number of different positions such as: Mining Engineer, Chief Engineer, Mine Foreman, Consultant, Auditor, and Technical Services Superintendent. Available to start work immediately

Working knowledge of marine diesel propulsions and electricity generation systems. Familiar with mighty power engines. Knowledge of support systems such as fuel centrifuges, air compressors, pumps, hydraulics, refrigeration, heating, and air conditioning.

I am currently on another project but can leave with a two week notice.

Provide diverse engineering technical support for research, reporting and production. Work history includes oil and gas production, oil and gas debt and equity capital transactions, and oilfield equipment.

I have worked both on and offshore for 30 years. I have also worked in shipyards, including writing commissioning procedures, commissioning equipment and writing preventative maintenance procedures. I have current offshore survival and medical certificates. I am immediately available.

Multi-disciplined sub sea engineer, extensive experience gained in the design, selection, operation, maintenance and acceptance testing of well control equipment, working in a variety of different environments to the standards specified by the manufacturer, drilling contractor and operator

PROFESSIONAL RESUME

I have been in the offshore industry for more than 23 years, my recent experience has been with new build drilling rigs as Commissioning Manager; Team Leader Mechanical and Piping Systems; Project Superintendent. Previous 14 years experience was with the British merchant navy as an engineer officer.

PROFESSIONAL OBJECTIVES Senior Drilling Engineer- Drilling Superintendent Houston / Overseas Assignments and Rotation Wide range of drilling experience in Well Planning / Engineering and Operations / Offshore and Onshore / Domestic and International.

I have been supervising and managing Building projects for the past 20 years With great success. I am not only a man Who is a supervisor but I have journeyman Level skills at most of the major trades, This allows me to insure proper quality.

Thirty years experience of Construction, Startup & Commissioning, Operations & Training for Combined Cycle Units, Coal Fired and Nuclear Steam Supply Systems (NSSS) & Balance of Plant (BOP) Systems.

Seeking a full time position to actively contribute to the technical achievements of a company in the oil and gas industry

results oriented, hands on, Construction Management person with 20+ yrs experience in various facets of the industry specializing in Industrial, Mining Construction. Prefers international or remote work location.

QA/QC Welding Inspector

Highlights of Qualifications „h 33 years of professional experience „h skills in budgeting, planning, coordinating and supervising projects „h record of reliability and responsibility „h Good working relations „h Practical hands on experience.

Have been in construction for 35 years

I have been employed in the oil and gas industry for over 20 years, 12 overseas. Supplemented by formal training, my career has enabled me to develop expertise in a wide variety of mechanical, technical, and organizational staff and work management areas.

Please see my attached Resume. As you will see I have a wide range of experience in Valves, Controls, Regulators, Rotating Equipment.

32 years, senior exploration geologist, 8 years experience in coal exploration, geological logging and compilation of drill data, ore body mapping, modelling, data interpretation, drill program management. 10 years research experience in mafic and ultramafic rock.

11 yrs+ managerial/sales Transferable skills Self-motivated, work under pressure Team player Leadership/interpersonal skills Mentor/train new staff Keen to train for position Optimal levels of strength & fitness Played football & hockey 15 yrs+ Dubai based Start work any time/place

Mining Finance professional. - 12 years progressive financial management. - 4 years mining expatriation experience (Africa) - Hands on, operation oriented - Team player, trilingual Canadian Citizen (English, French, Spanish) Available for international posting

Rig supervisor during 25 years with ESSO France. Applying for a senior or junior rig supervisor onshore.

My objective is to continue my career as an international, and domestic, offshore oil & gas production operator/supervisor/trainer.

Resume for the job in maintenance or operation field.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 [ 132 ] 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out