Resume - With 5 yrs experience, Chevron Indonesia, as a Petroleum/Reservoir Engineer. Act...

Misco Jobs

Resume #32151

CONTACT INFORMATION:
View contact information...

DEGREES
M.E. Petroleum Engineering, The University of Tulsa, Oklahoma, USA, 2001-2002
B.S. Petroleum Engineering, Institute of Technology Bandung, Bandung, Indonesia, 1995-1999

PROFESSIONAL EXPERIENCE
2002-present
Chevron Indonesia/Caltex Pacific Indonesia
Reservoir Engineer
Responsibilities:
As part of cross functional team of Geologist, Reservoir Engineer, and Production Engineer to design and execute reservoir management plan. Activities include EOR optimization, reserves estimation, project management, depletion plan, reservoir surveillance, workovers, drilling programs, and various routine operational actions.

Achievements:
- As a Project Manager of drilling 13 producer wells, successfully lead the project team to work based on Chevron's project management guideline; as of mid 2005, the work is ongoing in timely manner and with fully supports from both Chevron's Management and Government of Indonesia
- As an internal Qualified Reserves Estimator (QRE), completed area's yearly reserves review and business plan, including the forecast uncertainty/risk assessment in line with the economics of area's capital projects
- In 2005, accomplished a Full Cycle Depletion Plan (FCDP) for Area x Duri field; the report include study on reservoir characteristics, area's historical performance, best practices from past capital projects, various current reservoir/operational activities, and strategy for future development
- Lead an operational process to save $29 MM in 2004, by minimizing oil loss due to a facility related problem
- Since 2002, has identified and generated >50 various workover programs for both injectors and producers to arrest the decline rate
- Involved in a multidisciplinary group charged with study and providing recommendations on reservoir with bottom water problem; the recommendations were then used as a guideline for whole areas in Duri field
- Actively participated in Area 6&7 Temperature Observation Well Project, by assessing the reservoir uncertainty and selecting proper target coordinates based on value driver; as of mid 2005, the drilling has been completed for 19 wells and the data is extensively used for reservoir characterization/management supports
- Since 2003, has been actively involved in appraisals and proposals for four development well projects (consist of total >40 drilling wells); all AFEs successfully secured the approval from both Chevron's Management and Government of Indonesia
- Has lead numerous problem solving and routine field tasks, such as well/pattern performance reviews, water analyzing for scale indication, dynamometer and sonolog interpretations, routine surveillance and logs interpretations, as well as wellbore integrity maintenance

1999-2000
Chevron Indonesia/PT Caltex Pacific Indonesia & Bandung Institute of Technology
Production Analyst
Responsibilities:
Artificial lift optimization and minimizing oil loss from welldowns
Achievements:
- Maintained Fluid Over the Pump (FOP) <3% for >300 sucker rod pump wells
- Optimizing lifting efficiency on >200 wells by utilizing Rodstar software
- Generated >50 well programs to put the wells back on production
- Identified >30 underperformance wells due to artificial lift failure and took immediate actions to recover the production levels

COMPUTER LITERACY
- All Microsoft Office's applications
- Risk management software: @Risk and CrystalBall
- Project economics software: Merak PEEP, Dtree
- Database system: DSS
- Simulation software for rod pump system: Rodstar

MEMBERSHIPS
- SPE, Member # 3007236
- Indonesian Petroleum Engineer Association

TECHNICAL REPORTS/PAPERS
- Mayrizal, R., Tampubolon, P.P., and Fulkerson, E.R.: "Full Cycle Depletion Plan Area 6 Duri Field", Chevron Indonesia's internal report, July 2005
- Mayrizal, R.: "Infill Wells in Duri Field: Incremental versus Accelerated Oil Recovery", Chevron Indonesia's internal report, February 2005
- Mayrizal, R.: "Candidates Selection for Infill Wells based on Heterogeneity Index and Completion Efficiency Concepts", Chevron Indonesia's internal report, November 2004
- Efendi, F., Luciawaty, M., Masduki, A., and Mayrizal, R.,: "Pressure Loss Calculation for Yield Power Law Fluid in Eccentric Annulus Using Narrow Slot Approximation", presented in 2002 Conference of Indonesian Petroleum Engineer Association, October 2002
- Mayrizal, R., Masduki, A., and Prado, M.G.: "Viscous Loads in Sucker Rod Pump System Design", Tulsa University of Artificial Lift Project (TUALP) Technical Report # 23, October 2002
- Mayrizal, R.: "Modified Myhill-Stegemeier Method for Steamflood Performance Prediction", BS thesis in Bandung Institute of Technology, October 1999

AWARD
- Recognition & Award (R&A) from Chevron for the success of managing heat distribution during the steam shortage period in 2004

TRAININGS
- Technical related:
* Applying Decision Analysis
* Merak PEEP/Dtree
* Probabilistic Production Forecasting
* Reserves Evaluation
* Reservoir Surveillance
* Project Management/CPDEP
* Subsurface Project Management/CPDEP
* Heat Management
* Venturi Choke Design
* Cased Hole Logging Interpretation
* Well Completion, Workover, and Well Services
* Rod Pumping Optimization
* Core Analysis

- Industry related:
* Fundamental and Safe Work Practice
* Emergency Response Plan
* Incident Investigation
* Presentation Skill
* Negotiation Skill

REFEREES
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8751 to 8800 of 15512)

Go to Search Parameters...

Brief Description

Sales Management Executive providing leadership in hiring, directing, and motivating a sales force consisting of direct / indirect channels in the pursuit of increasing revenue, profitability, and market share.

MAINTENENCES MANAGEMENT OF HEAVY EARTH MOVING AND CONSTRUTION EQUIPMENT

Experiance in Detailed engineering, System Engineeering (PLC ,SCADA,DCS) FEED study, instrument selection, BOM preperation, Hotcutover, start up and commissioning, engineering and feild engineering

Autocad programming(VB, Visual Lisp, AutoLisp), Database, Report Generation (Crystal Reports, Active Reports)

I am a construction engineer having experience of more than 3 years in multi storey building construction

PDS Modelling, Microstation & ACAD 3d Modelling

Bachelor’s degree in Mechanical Engineering passed from N.E.D. University of Engineering and Technology Karachi in the year 1998

5 yrs extensive training and experience in PDS-EERaceway and Microstation, 8 yrs in Autocad

With 5 yrs experience, Chevron Indonesia, as a Petroleum/Reservoir Engineer. Activities include EOR optimization, reserves estimation, depletion plan, project management, reservoir surveillance, workovers, drilling programs, and artificial lift optimization.

M.S in petroleum geology and petroleum engineering. years working experience in reservoir characterization, formatioin evaluation in industry. knowledge in reservoir simulation, prduction and drilling engineering.

Power Station Chemist in the Philippines with experience in power plant desalination and ultrapure water treatment, corrosion issues, water/steam purity control, fuel gas and oil chemistry and engineering projects related to power plant chemistry.

I have completed my graduation in Computer Science. Have worked with Bell Canada as a Tech support Customer Representative. Right now working in a telecommunication Industry for Sony Ericsson as Software engineer.

engineer with excellent telecommunication knowledge

i am structural civil engineer from algeria and i have 9 years experience in such field, i speak and write both french and english

I have been involved in Health, Safety and Environment in excess of 25 years and I am an experienced and qualified Health and Safety Professional in a Construction, Oil /Gas, Drilling Off-shore and On, Aviation and Petrochemical environment. This has enabled me to undertake the following:

Chemical Engineer

29 years of Intergraph/Microstation, 9 years of AutoCad, 8 years of civil roadway design ,5 years InRoads, 4 years GeoPak, 3 years PDS/Frameworks, 2 years Bentley Structural TriForma

Aircraft maintenance engineer with turbine experience. AC/DC, hydraulics, pneumatics troubleshooting and maintenance. Vibration diagnostics and diagnostic software.

I do not have any experience. I want to make mining my career. I am very hard working, and want to mine until I retire. The only relative experience that I have is construction. I worked construction in Las Vegas for one summer.

Characterization of locations for production studies. Static models Generation. Seismic interpreter. Professional development toward the coordination of technical teams. Flexible to work under different technological platforms and interpretation (Geology, Geophysics and Petrophysics)

i m working in huawei technologies pakistan from 26/9/06 as site engineer and 2 times promoted as quality control engineer and civil work manager

Im newly graduate of Bachelor of Science in Industrial Technology major in Computer Technology.... of course i am a commputer literate, software (such as MS Word, MS Power Point, MS Publisher),Assembling & Disassembling System Unit,Knowledgeable in Basic Programming (such as HTML & JavaScript)

I have extensive mining and heavy equipment operator experience and training.

Design and development of civil and structural engineering projects. / Effective management of crews during field testing and inspections. Design and development of several mechanical engineering projects in an industrial chemical plant.

pipe fitter,6G certified gtaw& smaw welder ,field experience, saudi arabia Aramco project, Malaysia liquified natural gas under hyundai constraction, kellogs proponent , petron bataan refinery Philippines

3D Modeling, FEA, ANSYS, GTSTRUDL, STAAD, RAM, RISA, CAESAR II. USA, British, Euro, China, Russia Codes and Industries Standards.

LekCV

I am an electrical engineer working in Torrent Cables Ltd as electrical maintenance engineer since 1994. I have 12 years exprience. I have exprience of A.C drive, D.C. drive and other electrical instruments.

Electricial field 18 years, licensed journeyman since 1992, residential, commercial and industrial

Diploma in mechanical engg.

Ñivil (irrigation engineer), dam design and construction engineer

Engineering Graduate with extensive offshore drilling experience and strong IT skills

Canadian Wellsite supervisor and Production Foreman w/ extensive International experience, Supervising workovers & completions. Provided practical operation solutions to facilities in Russia, Kazahkstan, Kyrgystan, India and Canada.

Equipment Operator

HSEC Training Coordinator, SHE Coordinator, Heavy plant Mechanic and Mechanical Engineer as back ground.

Prepaired bq, proposal, monitor site

Electrical designer of lightin, power, and systems for commercial buildings

I graduated in May 2008 from Virginia Tech with a Bachelors degree in Mining Engineering. I have excellent computer skills and have experience working with many software programs including Vulcan, AutoCad, SurvCADD, and Microsoft Office.

Field geologist with background in ArcGIS and Gemcom's Surpac, proficient computer user and excellent communicator.

significant experience as Production operator in Oil & Gas Production and Processing industries around FOUR years experience.  Reviews unit operation data(shift supervisor /engineer log ,etc)and analyses this data to determine potential problems and ensure that unit operatio

Aerdynamic principals, aircraft structures and analysis, systems engineering, experienced with MS Office, CATIA V5, ANSYS, and AutoCAD

Experinced in process activities as well as technical service dept.Handling production of oil manufacturing such as metalworking fluids,wax,grease etc.,giving support to serivce engineers if any required.

Experienced HR/Training/Organizational Development Professional

More than 10 years experience in the petroleum, petrochemical, power, chemical weapons demolition, sheet metal and bridge manufacturing with quality assurance and quality control functions with current qualification as AWS CWI and API 510. Included is new construction, unit turnarounds, vender surve

Trade Qualification in Heavy Plant Mechanic. Knowledge of CAT and Komatsu machoines.

Civil Engineer

Diploma in PETRO CHEMICAL TECHNOLOGY

QA/QC, NDT INSPECTION, CONSTRUCTION QA/QC & CERTIFIED LEAD AUDITOR

Project Engineer Subsea (Oil & Gas)

Licensed Civil Engr with more than Ten (10) yrs of work experience mostly in railway projects, commercial and residential buildings in the Philippines. Includes Construction Supervision, Design, Estimates and Monitoring. Computer literate with knowledge in different Engg Softwares.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 [ 176 ] 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out