Resume - 20 years + WSS, proficient in Completions (Land, Platform, Sub Sea, Tender, Jack...

Misco Jobs

Resume #3292

CONTACT INFORMATION:
View contact information...

Nationality: British Marital Status: Married
Date of Birth: 24 January 1963 Age: 40

CAREER HISTORY

PTTEP / TOTALFINAELF THAILAND (Well Services Supervisor / Completion Engineer)

July 2000 – Present

As before, this position was mainly involved in supervising the running of high-pressure monobore gas well completions in the Bongkot Field in Southern Thailand. The job involved witnessing the assembly and pressure testing of all completion components onshore, then travelling offshore to run the completion. Made up the tallies, supervised all aspects of the running of the completion and the installation of the Xmas trees. Once the completion was run, compiled all the reports and sent them to the office in Bangkok. Also involved as Supervisor for E-line perforating, slick line and Coil Tubing supervision offshore.
The position also allowed for a lot work in the PTTEP Bangkok office during time off periods and when rig was sub-contracted to another operator (total 6 months). I was involved in compiling and evaluating tenders, final well reporting, completion program compilation, technical paper compilation and general completion engineering.

During 2002 was completely involved in a HWO campaign, from identification of tools and equipment, writing job procedures, standing instructions, programmes, prototype tool testing, etc. I then commissioned the rig and went offshore for an 8-week period as Company Rep for the 5 well workover programme implemented to replace damaged safety valves/ control lines. This involved cutting and removing the upper completion string (replacing it with a new DHSV package) and reconnecting a new tubing string and hanger system down hole.

BAKER OIL TOOLS (Consultant TST)

May 2000- June 2000

This job was running all Baker Oil Tools equipment that was available in the country for various Operators. Equipment consisted mainly of Liner Hangers and Completion equipment.

CALENERGY UK (Wireline Supervisor)

January 2000 – April 2000

Worked on investigation of loss of production. Investigations showed that the well was plugged with sand from perforations to fail pipe. After seven days offshore, abandoned job, recommending CT to remove sand.

TOTAL / PTTEP THAILAND (Well Services Supervisor)

March 1998 – August 1999

This position involved mainly working as a Completion Supervisor, installing monobore completions in the Bongkot Field in Southern Thailand (1 completion every +\- 10 days). The job involved witnessing the assembly and pressure testing of all completion components onshore, then travelling offshore to install the completion. Made up the tallies, supervised all aspects of the running of the completion and the installation of the Xmas trees. Once the completion was run, compiled all the reports and sent them to the office in Bangkok.

When not running completions, was also involved in the repairs of the wellheads / xmas trees, supervising electric line crews during perforating and logging and supervising coil tubing crews during the CT campaign. Jobs with the CT crews consisted of sand clean outs, N2 lifts, TCP perforating, memory PLT GR CCL runs, fishing for lost wireline / tools, balanced cement plugs, straddle inflate packers for zone treatment and TTRBP runs. Due to the end of the current drilling campaign, this position was terminated.
Also worked in the main PTTEP office in Bangkok and was involved in the control line analysis that was instigated due to well associated problems and instigated the recommendations. Was involved in setting up training seminars for running tubular equipment offshore using barrettes. Was also involved in the selection of the new generation SelecT cement through safety valves. Since that time 90 completions have now been run w/ no control line problems and no Safety Valve problems.

1995 – 1998 BAKER OIL TOOLS, ALGERIA (Field Operations Supervisor, Hassi Messaoud)

This position was responsible for the running of all Baker Oil Tools' activities in Algeria, including liner hangers, completions, surface safety, etc.

Part of the responsibilities included the supervision of all the regular rotators working, also the day to day contact with the customers both in Hassi and at the rig sites. Another aspect of the job was the writing of job procedures, calculation of tubing movement and the drawing of well profiles and schematics that are required by the customer for programmes and end of well reports.

The assembly and testing of all completion and liner sub-assemblies were co-ordinated through the FOS and was responsible for the final delivery and quality package of the above-mentioned equipment.

Before being promoted to the above position, was a Senior TS-T working in Hassi Messaoud running Baker Oil Tools completion and liner equipment as well as installing surface safety systems. Due to the location of the above work and the inability of the operating customers to obtain service personnel, was greatly involved in the total package of the workscope. That meant running the production liner, supervising the clean out of the well, running the completion, installing the xmas tree and supervising the wireline crew. This occurred on all wells worked on. Was also involved in the supervision of snubbing and coil tubing operations. Also took care of the cross training of the TSTs so that they became adept in other field lines and services.

During a period at home, was contacted by IPM in Mossel bay, South Africa and worked for them as Well Services Supervisor on a subsea completion, installation of subsea wellhead, wirelining, well testing and ROV work.

1995 HALLIBURTION ENERGY SERVICES, NORWAY (PSL Manager Completions)

Due to HES being awarded a large contract form Statoil they required someone to take care of the administration and actual day-to-day running of all aspects of this contract. Due to being fluent in Norwegian and also having prior experience with Otis, was asked to carry out the above work.

Responsibilities included the management of stock, liaising with the operations side to ensure personnel were up to speed on the timings of all jobs. Was based in Statoil's offices Bergen and Stavanger and also in HES Stavanger. Most of the time was at Statoil morning meetings, planning meetings, etc.

1993 – 1995 BAKER OIL TOOLS, ABERDEEN (TST)

Responsibilities included the day to day running of all completion equipment offered to customers out of the Aberdeen service office. This included retrievable and permanent packer system, electronic packer systems, specialised downhole safety systems, etc. Was also responsible for the field training of new trainees.

1984 – 1993 OTIS PRESSURE CONTROL, MONTROSE (Various position)

Began in a shore-based position redressing safety valves for the North Sea, progressing to the assembly and testing of completion assemblies. After approximately one year, started running completions in the North Sea for various customers. Also included TFL work, gravel pack, liner hangers and surface safety systems. The completion equipment ran included single and dual hydraulic packers, mechanical packers, installation of subsurface safety valves and various other tasks.
After three years was promoted to Commodities Supervisor in charge of all onshore and offshore work and personnel. This involved the total package of work offered by Otis, from initial customer contact through to the assembly and delivery of assemblies to the customer and the direct support to the offshore specialist running the equipment.

This job was taken a step further and was transferred to the Sales Department handing four major North Sea accounts. Was responsible for the sales revenues, generating further sales opportunities and the liaison between the customer and the operations side of the business.

1981 – 1984 OTIS OVERSEAS INC, NORWAY (Various positions)

Was involved with the onshore make-up and testing of completion assemblies and the repair of downhole safety valves. Was also used in the Wireline Department offshore as a trainee and worked for almost one year assisting in rigging up units, running and pulling plugs and safety valves. Before leaving Norway was running basic completions for various customers.

WORK EXPERIENCE

Job functions performed during career

2000-present Well Services Supervisor
2000 Wireline Supervisor
1998-1999 Well Services Supervisor
1995-1998 Field Operations Supervisor
1995 PSL Manager Completions
1993-1995 TST
1981-1993 Various Positions

Types of Installations and facilities worked on

Production platforms, Semi Subs, Jack-ups, Tenders, Drill Ships, Land based rigs.

QUALIFICATIONS

School

St Svitsun Gymnas, Stavanger, Norway – 2 Higher Levels,
Millfield School, Somerset – 5 'O' Levels.

University / College

Professional Organisation Membership

Relevant course attended / Certification (with dates)

H2S Safety Training. Leiro Survival Training. RGIT Survival Training (UK, Europe and Norway). IWCF Well Intervention Pressure Control. Otis Schools: Packers and Completions, Wireline 1, Liner Hanger, Surface, STOP, Participative Leadership, Effective listening, Various Sales Seminars. Baker School: Production Packers, Liner hangers, Surface Safety and Hydraulics.

Date Last Medical: July 2002

Date Last Survival: December 1999

Date Last Well Control: December 1999

LANGUAGES

Spoken Written

English – 5 English - 5
Norwegian – 5 Norwegian - 5
Proficiency of above graded against scale:- 1 – basic level to 5 – Fluent

REFERENCES
References available on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6451 to 6500 of 15341)

Go to Search Parameters...

Brief Description

I am a well-motivated person, honest, serious, confident in all aspects. I got my high school diploma with A grade and have been accepted in the medical college. Infortunately not completed due to political reasons at that time in my country.I speak fluently Arabic, English , French, a little German

I am mechanical engineer with 14 years experience in preventive & predictive maintenance for reciprocating & rotating machinery in the oil & gas industry. I have computer & software skills for office and maintenance applications. I have BS Mechanical Engineer degree from the UIS University.

Over eighteen years in QA/QC, inservice and T/A inspection, inspection planning and refinery reliability tasks.

Multi disciplinary engineer

A Mechanical Engineering Graduate with a total of 13years experience in oil & gas, petrochemical and food processing plant.

Information systems - Analyst /Programmer/Project leader/Business Analyst

Marine Engineer with 30+ years experience in operating, designing, installing and commissioning marine systems

PhD in physical chemistry. 8 years experience in environmental management, monitoring, damage evaluation and quality system. previously worked in Battelle Memorial Institute structure. previously worked in Saudi Arabia. focused, hard worker, responsible with high leadership skill.

CRO/LEAD OPERATOR. OFFSHORE Oil/Gas production platform. Three phase seperation, wellbay, hydrocyclones, compression, dewpoint control, asociated utillities. Gas plant H2S removal, adsobsion, solvent regen, sulphur recovery, tail gas unit. Cryogenic N2 removal, mol sieves, cold box etc. Refinery exp

3 year Diploma holder in electrical Engineering 13 years total experience as senior Industrial Electrician in which 3 years are in LPG plant. Ready to work anywhere.

Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction, Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants.

14 years of professional experience as Chief Accountant and Accountant in reputed companies. Excellent in Accounting, Auditing, and Preparing Account related documents for all needs of a company. Hands on experience in Microsoft Office and Accounting packages like Daceasy, E.X. , Tally etc.

I am a well-organized and reliable Instrument Engineer with over 25 years experience within the Petrochemical, Nuclear, and Power & Water Industries. My project involvement has included offshore & onshore maintenance, inspection, construction, and commissioning at technical and supervisory levels.

Start-up engineer on power plant control systems, Foxboro I/A, Bailey, GE Mark VI, and Yokogawa.

Multifaceted, proactive, and highly motivated professional seeks position within the mining, construction, transportation, or chemical process industry combining solid skills and diverse experience

Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Self starter, hands on in fabrication/construction supervision, trouble shooting, scheduling/conflict resolution of different trades on complex plant construction.

Inspection high pressure vessels and supervision pipe-lines in Europe. Quality Assurance & Quality Control in nuclear power plant - crew 7 people. Quality Control, punching, hydro-testing of pipe systems - crew 10 persons.

Heavy Duty Mechanic Certificate -IP:K-06-14390 Inter-provincial Red Seal Certificate -23 years experience in the mining field -16 years experience as Heavy Duty Mechanic (underground and open pit)

30 years experience with Land Based Drilling Rigs that include SCR, Mechanical, Mobil and Heli Rigs ranging from 800 to 3000 HP, Familiar with Topdrives both Hydraulic and Electric

Finance Professional with extensive experience in accounting, internal and external financial reporting, systems, business planning, operations analysis and international operations. Leadership experience in both corporate and operating unit environments, within the United States and Latin America.

Mechanical Engineer (MOS) Refinery and Petrochemical Equipment Degree. Level II SNT-TC-1A for Magnetic Particle, Dye Penetrant, xRay examination, Project Manager course in U.K.

Experienced Contracts Engineer, Planner, Estimator having worked successfully in all aspects of the industry from North Sea to Australia. Enjoys the challenges of new technologies and new ideas

Presently working as a CONTRACTS ENGINEER for the last several years with a Multinational Company in the Gulf. Seeking higher and prospective opportunities.

My expertise includes waste-to-energy facilities along with gas and oil fired boilers and all their associated equipment. I have experience in turbines up to 70 MW’s. I would make a good fit into any type of power plant weather it be in operations, maintenance, supervision or management.

Chemical Engineer with Masters Degree in Environmental Engineering and Management. Areas of experience include, hazardous waste management, remediation & cleanup, environmental impact assessment ISO 14000 and environmental audit.

I am a driven and focused individual who knows how to set goals and work to achieve them. Outstanding skills/competencies in Materials Management, Inventory Control and Accounting. Pro-active and results-oriented with the talent for identifying and solving problems.

Over 25 years of diverse and successful experience in material control in areas including: Nuclear/Coal Power Generation, Bulk Handling & Storage, Co-generation, Commercial Maintenance, Oil Refinery, Warehouse/Distribution, Shutdown/Turnaround and Outages.

Experience in all phases of material management & expediting, design office & engineering & project coordination. Experience in heavy construction including offshore oil platforms & related facilities, nuclear fuelled power plants, paper mill, chemical plant & overseas military facilities.

Over twenty-four years of professional experience as a planner, scheduler, estimator, project engineer and supervisor in the industrial construction, maintenance and turnaround fields of the petrochemical, paper and pulp, power generating textile manufacturing and offshore industrial industries.

I am a Graduate Mechanical Engineer and have good proficiency in Computers. I have put in 13 years of hard work in Construction of Oil & Gas Pipelines, which has given me exposure in all fields like Project Management, Planning, Tendering, Cost Estimation and Control, Execution.

OBJECTIVE To secure a position within a growing organization in which my talents, attributes and experience could be utilized to their maximum potential.

For the last twenty five years I have mainly been working of shore. I have worked in various over sea countries mainly in Asia. In that time I have done horizontal long reach, sub sea completion’s, HPHT wells and worked in H2S areas

Last employer: Lidl Ireland Ltd. as District Manager. International experience

25 years petrochemical I&E experience, engineering, and operations assistance...Process Safety Management/Procedures writing...training manuals...PowerPoint, Word, Excel...Startups, Commissioning, Shutdowns, Safety Enforcement, Inspections

Geodesist/Land Surveyor/Geomatics/GIS consultant

Obtain a full time position in the oil field services industry. To be part of a world class Oil Services Company would be a welcome move for myself. I insist on providing a quality product and feel most fulfilled when I achieve this goal

-20 years of North American & international Petroleum engineering experience, including reservoir simulation. Strong technical skill ,ability to communicate effectively, -updated several large simulation models, and developed new reservoir simulation models for multiple oil fields.

I am a graduate from a Safety Engineering Technology Program. I have twenty-two years experience in the health & safety field in the areas of mining, oil & gas, manufacturing, and construction industries.

Thirty years experience in the construction, fabrication, and pipeline industry. Have expertise in a variety of areas from years of hands on experience, to Forman, Superintendent, and Management. QC/QA, Safety, Project Management, Consultancy, (Economic/Mechanical), job efficiency, Materials.

33 years experience in drilling industries, started as rig hand, since 15 years drilling supervisor, drilled several types of wells in different countries on and -offshore.

International Finance Manager with extensive experience in the upstream oil and gas business.

Project Manager with over 35 years of experience in the construction industry, which offers an extensive and diversified array of industries such as power generation, pharmaceutical, semiconductor, large office facilities, pulp/paper and plastic projects, coal gasification and others.

Proven ability in Purchasing, Expediting, Procurement QA/QC Coordinator, Material Control, Material Coordinator, Logistics and Warehousing. Developed and implemented Material Control and Warehouse Procedures. Proficient in SAP, MS Word and Excel. Bilingual, fluent in English and conversational Thai.

39 years experience in mining , open cast and underground . administration , planning operation including safety.

29 years oilfield experience from roustabout to site manager.

i have over 20 years experience in the oil and gas industry of which have been in the materials/logistics role

Extensive electronics/instrumentation installation, troubleshooting and repair of subsea control systems. This was analog/digital to the component level; this was accomplished on systems controls and computer monitoring , and subsea modules to the board level repair.

20 years + WSS, proficient in Completions (Land, Platform, Sub Sea, Tender, Jack Up) also single, duals, electronic, Wireline, Coil Tubing, HWO. Service Industry background (Otis and Baker Oil Tools). Current contract finishing Sept. As per CV, willing to work in all countries.

Over 25 years of experience in projects related to mechanical process, material handling and mining. Experience in field engineering, construction, and preparation of conceptual and detail drawings, material take-offs and cost estimates.

ONSHORE-20 Years. Set-up and supervise Mechanical Operations & Maintenance duties. OFFSHORE PLATFORM-4 years. Oil & Gas offshore Platforms Maintenance instruction to Maintenance staff. Identify and control all replacement spares and equipment of all offshore plant and equipment.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 [ 130 ] 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out