Resume - Level 4 scheduling in oil&gas with Primavera

Misco Jobs

Resume #33089

CONTACT INFORMATION:
View contact information...

FIELD OF EXPERIENCE
19 Years of total work experience in Project control, Mechanical Maintenance and Refinery shutdown Planning
POSITIONS AND RESPONSIBILTY:
(i) SITE PLANNING ENGINEER – SAKHALIN II Project, Phase-2 ONSHORE PIPELINE CONSTRUCTION, STARSTROI Contractor, Russia from July 2006 to till date.
Client: Sakhalin Energy (Consortium of Shell, Mitsubishi & Mitshui)
* Preparing 4 months Look ahead plan and monitoring the progress by week.
* Preparing Daily, weekly & Monthly progress reports for Pipe line construction activities.
* Monthly updating of Level4 schedule in Primavera.

(ii) SITE PLANNING ENGINEER – PILES & FLARES FABRICATION (5 Months) Ersai Capsian Contractor, Kazakhstan from 3rd December 2005 to 28th April 2006.
Client: Saipem Italy
* Preparing Contractual Level 4 Schedule for oil & gas projects for Kashagan field development experimental programme project.
* Preparing Daily & weekly progress reports for Piles fabrication
* Preparing Level4 schedule, Planned Vs actual S curve

Also, worked for Kashagan field development – Procurement & Fabrication of Ancillary Steelwork & Pipe racks
Client: Keppel Kazakhstan

(iii) PLANNER – PROJECT CONTROL ( 6 Months) in Saipem Italy, San Giuliano Milanese, Italy from 9th March 2005 to 01st December 2005.
Client: AGIP KCO, Italy
* Preparing Contractual Level 3 & 4 Schedule for oil & gas projects for Kashagan field development experimental programme project.
* Preparing planned S curves based on physical measurement system and tabulating progress calculation up to Level4 & Level5.
* Updating the schedule periodically, monitor the progress and advice early actions for recovery.
Projects involved:
(a) Kashagan field development – Mobilization of Drilling Unit at Artificial island D
(b) Kashagan field development – Fabrication & Erection of Piles & Flares
(c) Kashagan field development – Erection of Trunk lines & Production flow lines

(iv) MANAGER – PROJECT CONTROL ( 5 Months) in Saipem India Project Services Limited, Chennai, India.. from October 2004 to 8th March 2005.
* Project engineering for Preparing pre-bid proposal of oil & gas projects for our parent company Saipem France.
Projects involved:
(a) Gbaran Ubie Integrated oil and gas development project, Nigeria
Client: Saipem France
Scope of work: Pre-bid - Issuance of MTO for CPF – central processing facility, manifold for Piping, valves, Instruments & electrical to assist the client to submit technical proposal to SHELL SPDC.

(v) SCHEDULER ( 3.5 years) in KNPC-MAB Refinery, Kuwait from June 2001 to September 2004.
* Preparing Refinery Turnaround shutdown schedules in Primavera P3 for all maintenance, Updating and preparing Daily status report, S curve and monitoring critical path jobs. Preparing shutdown completion report with analysis and costing..
* Implementing monthly Preventive Maintenance Programs for Stationary equipments and safety relief valves using MAXIMO CMMS. Preparing monthly PM report for trend.
* Creating shutdown work orders with Job plans in MAXIMO, linking PM work orders, transfering to Primavera Enterprise V3.5, scheduling, transfer back to Maximo. Updating the status and completing and closing work orders and time sheet labor reporting.
* Shutdown scheduling for Technical proposal
Preparing Turnaround master & detailed (Level 1 & 2) work Scheduling in P3 for submitting Technical evaluation tender for my Gulf Spic Contracting Company, resource estimation and leveling and manpower deployment.
Below are some of my schedules submitted for Technical proposal tender:-
- Gasco Habshan & Bab, Abu dhabi Shutdown November 2004
- Gasco Habshan & Bab, Abu dhabi Sulphur recovery Units shutdown Sep 2004 to April 2004
- Mina abdulla refinery, Kuwait, Vacuum rerun Unit revamping by Technip, Sub-Contract by Gulf Spic Co – Master milestone Level 1 schedule prepared.

(vi) SENIOR TECHNICIAN – MECHANICAL (14 years) in Tuticorin Alkali Chemicals and Fertilizers Limited, Tuticorin, India (a group company of SPIC) from January, 1987 to May, 2001.
* Maintenance - belt conveyors, pumps, driers, ball mills, centrifuges, flow conveyors, valves and piping..
* Planning - Equipment History Updation, PM, Spares procurement, Shutdown scheduling, Upkeeping of ISO9002 Quality records, Programming of CMMS.
III. POINTS OF SPECIAL MENTION
* Very much fluent in Primavera Project Planner P3, Primavera Enterprise P3e V3.5, Microsoft Project 2002 for Oil&gas project schedule preparation, Turn around shutdown scheduling, cost estimation, resource histogram and loading, updation and reporting for analysis.
* Good experience in application of earned value for project progress measurement
* Having sound knowledge in CMMS MAXIMO V5.0 and advanced SQL queries.
* Hands on knowledge on FOXPRO Database management software Programming and EXCEL VBA macro programming.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 15509)

Go to Search Parameters...

Brief Description

PDMS Desgn,Draft, Isodraft and Catalogue Creation and MDS supports

ELCTRICAL ENGINEERE

Level 4 scheduling in oil&gas with Primavera

Continuous scaffolding job for more than twenty (20) years in the field of construction, Petro. Chemical Plant and Oil & Gas Industry.

I am a mathematics post graduate alongwith apprentice training in refiney technology. I have choosen refinery tech. as career. Approximately 17 years in Petroleum and Petrochemical industry working as a Plant Manager/superintendent/shift controller/ Supervisor / Operator including 13 year on ovseas.

Electrical & Instrumentation Inspector - Broad experience in E&I installation in Fabrication of Offshore Production Platform, FPSO, D.P Cable Laying Vessel and Oil & Gas Refinery Plant. (Knowledgeable in industry standard recommended practice: NEC 500, IEC/NEC 505, API RP14C, 14F.

Instrument engineer

I am an experienced AutoCAD operator / draftsman with expertise on mechanical, structural, civil and electrical drawings, using Autocad 2009. I have eleven years of extensive hands-on work experience in a manufacturing as well as construction set-up.

Barge Anchor Operator, Rigging, Scaffolding Foreman offshore, Crane driver 100t and Tower.

To Carried out overhauling, repairing preventive, corrective breakdown, and shutdown mechanical maintenance, trouble shooting, condition monitoring, alignments, hydro testing, of rotating & static equipments, like pumps, compressors, fin fans blowers, heat exchangers, column, and using all type of

I have worked more than 12 years in Oil & Gas, Refinery, Petrochemical industry as a field operator and DCS & SLPC control panel operation at off-shore & On-shore.

18 years experience in Gas- Petrochemical industries as sr. Technician, assistant shift supervisor, etc

My strengths are my ability to take charge and work well within a team environment and in my experience in developing algorithms from concept phase to commercial implementation

Read blue prints, electrical scymatics, troubleshooting and repairing electronic devices for the industrial sector and wireless communications equipment.

Information Management, Data Management and CAD Systems Management

Over than 9 year experience joint in Oil & Gas industrial. Specialize on inspection, testing and documentation for fabrication, installation structure and piping work for offshore Jacket structure and pile make up, process & living quarters offshore platform, FPSO piping process and floating system,

A professional Mining Engineer with 15 years experience in mine ventilation

I have vast experience in the Safety related field.

20 years experience in the Instrument & Controls through to Information Management arena

I am an experienced engineer with productive employment and education in the field of processing, supervision, commissioning, start-up operations, production and design.

Nimr'C' Full field water injection project.

Installation of electrical pipe,electrical wiring,electrical controls,electrical panel board.Installation of main over current protection,lightings,switches.Banking of transformers and splcing of wires.Installation of A.C. electric motors,magnetic contactor.Installation AHU,ACU,FCU,colling tower

10+ years of combined professional experience utilizing geophysical interpretation, seismic processing, single stack and simultaneous deterministic inversion, 3D geo-cellular modeling, software consulting, training, and development skills. Working knowledge of 3D interpretation techniques, etc.

I am an experienced senior geologist aged 36 and I believe your company offers the right opportunity for my development into senior management. I hold a Bachelor of Science Degree from the University of Zimbabwe, which I obtained in 1994. I also hold a Certificate in Mineral Resources and Geological

SDE with very good experience in very demanding working environment; person self-motivated, performance driven, team player, with good IT skills. Experience in FSU and Eastern Europe. Bilingual Spanish– English, with basic conversational knowledge of Russian.

 Project Management; Demand Forecasting; Simulation & Analysis Packages/Models

Mechanical Engineer & a result oriented professional with qualitative experience of over 13 years in Cost Estimation, Planning & scheduling and Cost Control in the EPCM & EPIC projects of Offshore and Onshore Oil & Gas, Port & LNG Terminal and Petrochemical plants in Nigeria, India and Middle East

I am a professional Mechanical Engineer with 20 years Gulf experience with MEP services in building construction..

PROFILE:A Piping/mechanical superintendent with 13 years experience in the petrochemical & construction industries in Middle East. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives. First-class analytical, design and problem solving skills. Good

Wellsite Geologist

CAD Specialist-Designer

Environmental Professional with 10 years experience is looking for a managing position in Oil&Gas industry

a challenging and responsible position in Purchasing, Procurement & Supply Chain Management utilizing experience gained in Domestic operations and multinational Projects.

23 years of sales experience including positions as a sales representative, sales trainer and sales manager. I work very well with the public. I know how to close the client and get the answer I am looking for.

High school and some collge . worked offshore jack up rig and onshore rigs in oman , Dubai , Abu Dhabi, Kuwait and recently work in Saudi Arab

Master Mariner, Offshore FPSO Marine Supervisor

Qualification : Diploma in Technology - Mechanical Gas – 1999 to 2001 School of Professional & Continuing Education ( SPACE ) University Technology of Malaysia. Gas Engineering Supervisor Certificate in Natural Gas - 2002( Lisence No. : 00027 ) Certified by Malaysia Energy Commission – ST ( IP )

Geophysicist with 30 years of experience in aeromagnetic surveys, Remote Sensing and GIS data analysis for geological mapping ,mineral ,oil exploration ,geo engineering and geo environmental projects. I also possess knowledge of “KingdomSuite” ,“Geosoft” packages and FORTRAN,C,C++. Interested in ch

Sr. Petroleum Management Engineer with extensive diverse experience in Light to Heavy Oil, Oil Shale, Tar Sands, Reservoir, Completions, Production, Drilling, Well Completions/Simulations and Facilities Engineering, and in Offshore, Deepwater, SURF (Subsea, Umbilical, Risers, Flowlines), Terminals,

Free! Nearly 30 years of significant, progressive experience directing teams to successful completion in onshore and offshore drilling.

Welding Technologies, Technical assistance, Workshop, site, AutoCAD, Tekla Structures, XSteel, SolidWorks, MS Project

Started carrier with Operations and later switched over to projects. For the last 17 years employed as a safety professional mainly in the Petroleum/ Petrochemical field. Expert in carrying out Safety audits/ HAZOP studies and QRA.

Over 28 years professional experience IT and SAP SECURITY

Looking for a long term contract or permanent challenging position worldwide, utilizing broad - based experience in projects maintenance– Maintenance manager, Supervisor, Team leader – Air Traffic Control, Industrial projects, Telecommunications.

I offer over twenty-five years of Sales and Sales Management experience, as well as domestic and international Marketing. Through out my career I have demonstrated the ability to provide companies with professional and high volume producing sales teams as well as building strong customer relations.

Geoscience expertise from progressively increasing career responsibilities. Management expertise from progressively increasing career responsibilities. Please see resume for details.

Multiple Industrial Construction Projects involving new Fossil Power Generation, and Petrochemical Process facilities; Routine seasonal turnaround or shutdown schedules for oil and gas production, oil refining, fossil gas & coal fired power generation plants; Environmental – Remediation projects;

Masters in automotive engineering

Senior Hydrogeologist

Master in Metallurgical Engineering. Experience in manufacturing management, operations, quality assurance, and production; and in managing and implementation of ISO 9002 certification. Fluent in Spanish and English.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out