Resume - Design Engineer (Piping & Stress Analysis), Mechanical Engineering

Misco Jobs

Resume #33769

CONTACT INFORMATION:
View contact information...

Design Engineer (Piping & Stress Analysis )
(Oil & Gas / Plant Piping / Cross Country Pipelines)
A result oriented, capable, ambitious Mechanical Engineer with Piping Design & Stress Analysis and on-site experience along with leadership capabilities seeks a suitable position

EDUCATION & TRAINING
* Piping Engineering Course, Dec' 2002 Indian Institute of Technology (IIT Bombay)
* B.Tech (Mechanical Engineering), 1990 to 1994
Graduated in first Division. J N Technological University (Hyderabad-India)

SUMMARY OF PROFESSIONAL EXPERIENCE
Engineering:
* With 11 Years of experience in Consultancies / Engineering Organizations in the field of Oil & Gas, Process plants, Refinery and Cross Country Pipelines.
* Stress Analysis of 48" and 42" diameter networks and Flexibility calculations of the piping system.
* Well Experienced in Detailed Engineering and Design Calculations of Piping Systems.
* Pipeline Engineering Design, Finalizing the route corridor and developing land clearance strategy. Preparation of Route drawings, developing Alignment sheets.
* Pumping Stations, Block valve stations, Buoyancy control, Cathodic protection (Sacrificial anode / Impressed current), River crossings, Road crossings, Hydro test and Pre-test pressure calculations, Method statements, Ditch breakers, Slope breakers, Field coating.
* Compressor Station, Pressure reduction skid / Filter separators / Gas Coolers / Fuel Gas System / Instrument Air System / Vent Stack / Gas Heaters / Metering skids / Pressure Control stations
* Preparation of Test packs and Performing Hydrostatic test including Commissioning.
* Design experience of Developing Piping Systems, Piping Layouts (heavy & complex) and Isometrics with Material take-off.
* Design and Selection of Pipe Supports for Hot and Cold services.
* Working knowledge of National / International (ANSI / API / ASME / SHELL / PDO / TotalFinaElf / Gasco) engineering standards / codes, statutory and recommendatory requirements.
* Plan and manage projects, and Prepare Material, Cost and Timing estimates, report and design specifications for machinery and systems.
* Fully conversant with ISO 9000 Standards and Practices.
* Preparation of Technical & Procurement specifications.
* Sizing & Designing of Flow lines & Cross Country Pipe Lines according to API-5L or 15L specification
* Construction Engineering and Engineering support to Fabrication Workshop including Practical experience in site for three years.
* Departmental interaction with concerned disciplines like Process, Equipment, Civil, Electrical and Instrumentation and QA / QC.
* Keenly involved in conceptualization and evolving of Design department for Oil & Gas unit in Galfar Engineering and Contracting.

Tender and Material Procurement:
* Preparation of Material Specification * Placing Indents & Inviting Quotations
* Preparation of Piping & Equipment engineering packages
* Technical Evaluation of tenders & Recommendation
* Design checking of vendor drawings * Technical bids & Vendor development.

PROFESSIONAL BACKGROUND
June' 2004 to Till date ILF & Partners LLC, Muscat – Oman.
Mechanical Engineer (Piping & Stress Analysis)
* Sohar Pressure Reduction Terminal and outlet gas pipelines of consumers for Oman Gas Company (OGC)
* Gas Heaters / Filter separators / Metering skids / Control stations
* Eastern Gas Distribution System for Dolphin Energy Ltd. (DEL)
Abu Dhabi (UAE)
* 42" diameter pipeline network for base case
* 48" diameter pipeline network for swap option including hot tap
* Stress Analysis of 42" diameter pipeline network
* Compressor Station – Al Ain
* Hot tappings
* Pressure reduction skid / Filter separators / Gas Coolers / Fuel Gas System / Instrument Air System / Vent Stack
* Piping / Equipments specifications and datasheets
* Pigtrap integrity evaluation study for Abu Dhabi Oil Co. (ADCO)

Feb' 2002 to May' 2004
STA Joint Venture (Stricher, Haudstaut&Timmerman, Günsayl, Alarko) (Turkey)
Pipeline Engineer
* Supervising engineering team of 4 engineers and 5 draught men.
* Worked for the 42" diameter BTC (Baku-Tbilisi-Ceyhan)
Crude oil Pipeline in Turkey.
* Supervision of Construction including QA / QC.
* Stress analysis.
* Handling service contracts for Petroleum Development Oman
(PDO) on deputation.

1999 to 2002 Asian Brown Bowery, (ABB) (Soimi spa-ITALY)
Piping Engineer
Designing and Detailing of
* Shurtan Gas Chemical (Ethylene & Polyethylene) Plant, Kashkadharya, UZBEKISTAN
* Managed multi discipline design engineering team consists of 3 engineers and 4 draughtsmen.

1994 to 1999 Bharat Heavy Electricals Ltd, (BHEL-India)
Project Engineer (Design)
Successfully Designed and of Engineered of
* 240 MW Power Project, Kayamkulam –INDIA.
* HRSG, CPP Expansion project for Hind. Petroleum Corporation Ltd, Mumbai, INDIA
* CPP expansion Power Project for Russep Power Project, (OMAN).

COMPUTER SKILLS
Engineering Applications * PDMS * CAESAR-II * CAE-PIPE * Auto CAD
Tools * MS word * MS Excel

ADDITIONAL INFORMATION
* Work effectively independently or as a part of team.
* Strong communicational and interpersonal skills.
* Availability: One month
* Expected Salary: Negotiable

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7101 to 7150 of 15498)

Go to Search Parameters...

Brief Description

DCS AUTOMATION SYSTEM DESIGN ENGINEER

COmputer Literate--AutoCadd,Primavera,MSoffice Applications

with computer proficiency in SESAM, ABAQUS, PATRAN, FLEXCOM, ASAS, SACS, FEMGV, STAAD Pro, AutoCAD, and MathCAD

Extensive diverse EPC Management, Operations, Consulting - domestic & world=wide, all disciplines Refinery, Petrochem, Chemical and Pharm. projects, operations and plant trouble shooting with associates power and infrastructure.

Managing multidisciplinary Sub Surface Team in respect of strategic planning, coordination and monitoring of sub surface activities

Expertise in analysis of Chemicals, petrochemicals, petroleum products using instruments like ICP-OES, GC, HPLC, AAS, FTIR, CS Analyzer etc. Having expertise in SPC / SQC techniques, LIMS and SAP QM module. Research in Petrochemical and petroleum products. Worked for Chevron Oronite lube additive co

If you are looking out for someone who can 'Make a difference', Daring, Challenging, 'Thinking out of the box', Multi-tasking ability, is not afraid to speak up his mind plus Business Development, People Management proven experience & skills, please read this application.

Exploration geologist in oil company. Structural geologist

Ph.D., Zoology (Commanded) Bharathidasan University, Tiruchirappalli, Tamilnadu, India, Thesis title-Oil effluent toxicity and detoxification responses in the freshwater mussel, Lamellidens marginalis

Having more than 12 yrs experience in safety field. Ready to accept any new challange. could able to work any pressure environment.

I have 22 years of experience in the mining industry, Blasting Certificate For Open Cast Mines; Blasting Certificate For Scheduled Mines; Detnet Blasting Certificate.

I am Mechanical/Pipeline Engineer working in the Oil and Gas Industry for more than a decade now.

Looking for Mud logging Geologist Position

Skills: - Computer Skills. - Computer Maintenance (Software & Hardware)

Geologist with 3 years experience in seismics and data processing

Instrumentation Design engineer

6 year work experience in Oil & Gas, Petrochemical, Power house ,Fertilizer

Plastic Engineer, Technical & handle the customer's complains

I am B.E Mechanical Engineer (degree) with 4 year experience In Oil and Gas filed regarding Piping fabrication & erection with steel structural works. I have attached my detail resume for your consideration.

Well-rounded Chemical Engineer with great personality.

Eight year extensive experience in Oil/Gas Power Generation and Chemical Industry. I am capable to work on all type of control System like PLC, DCS, SCADA and all type of field Instrumentation as well on line Analyzer's. Having good experience of installation, commissioning and maintenance. Certific

Dedecative, Passionate for work excellence,Creative,New Idea Planner... PGDM Graduate In Dual Speciaization In Marketing and Retail Management

Experienced Production Enhancement Engineer

Mining Enginer with 3 years of experience in heavily mechanised opencast limestone mine

lead elctrical technician ( i t i ) working at qatar in rasgas lng plant experience 12 years

Senior Completions / Intervention Lead Engineer with over thirty year’s extensive experience

BSc Degree in Geology. Have experience in coal, coal bed methane, groundwater exploration. Can work extended hours, with minimum supervision

Oil & Gas Professional with 3 years Exploration and Operation Experience

Industrial Maintenance Electrical and Intrumentation Technician

Expert in quality analysis and various management system.

Experienced metallurgist with extensive design and operations experience in gold, copper, nickel and silver,

I have gained experience in followings i. Heat Exchange Installation and Valves Package; Expansion Tank and Air Separators; Diffuser Installation; Booster Plump Installation; AHU/FCU Installation and Valves Package

Substation Design Engineer

Petroleum geochemistry, petrography, ARC GIS,

To obtain a suitable position in an organization involving in petroleum exploration & production who provides opportunities for continuous learning in a supportive and conducive environment.I am a highly motivated individual, who thrives on meeting targets.

Sr. Project Manager - pipelines, mining, heavy oil, oil and gas. International experience. Projects to $12B USD.

B.E with 2.5 Years Of Exp as a Mining Engineer

Drilling w/ compound drive-kelly drilling Rig, Rig up Rig down Drilling Rig, Use of Directional tools, instruments, Some Exp. Diesel electric rigs, Well control procedures, Gas Plant Operations

Insrumentation and control,PLC RSLogix ,SCADA/HMI Citect, Wonderware,Visual Basic 6, .NET, ASP.NET, OPC, NI Measurement Studio, Interface Ethrnet,RS-232 protocols- TCP/IP,SOAP,Modebus RTU/ASCII, Modebus TCP/IP..

Over 9 years experience in the drilling industry. Acquired both domestic and international drilling knowledge, acquired numerous skills in the petroleum, gas, geo-thermal exploration and gas storage and industry while working for several contractors. I have gained experienced in all types of wells

I am a 26-year old sales engineer holding a 4-year honours degree in Agricultural Engineering looking for employment. I have 3-years experience working as a water sales engineer . My duties were preparing quotations,invoices,helping clients in pump selection and preparing monthly sales reports.

Autocad, microsoft office

Petroleum Engineer with circa three years of diversified experience, mainly in well completions, liners, sand control, subsurface safety system, inflatable packers and flow control. Designed well completions, liner hangers, and gas lift system as per client requirements. Run Liner hangers and casedh

Engineer with extensive experience in drilling, completions, workovers, stimulations, design and construction of pipelines, gathering stations, compressor stations, gas plants, oil batteries, tank farms, metering stations, gas sales contracts, senior oil and gas company management

Quality Assurance, Quality Control, Construction, Project, ISO 9001, System Development, Implement, Audit, Corrective & preventive actions, Continuous improvement, Oil & Gas, power & petrochemical industries

A Chemical Engineering graduate with outstanding professional experience of 33 years in the Operation, Project implementation, Process engineering Jobs and HSE management, in medium to large sized Petrochemical/Fertilizers (Ammonia) / Chemical plants/Offsite storages and terminal complex.

Design Engineer (Piping & Stress Analysis), Mechanical Engineering

Over 15 years exp in construction company as Technical office Engineer, Document controller, Quantity Surveyor etc

9 years in Pipeline Engineering, Project Management/Engineering Co-ordination for Conceptual, Bid & detailed design / engineering, & construction, Analysis and Design of RCC & STEEL Structures.

All kinds off electrical work like installation of electrical equpment construction work and maintanance commissioning and testing

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 [ 143 ] 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out