CONTACT INFORMATION:
View contact information...
OBJECTIVE:
To seek and strive for a distinguished position in inspection of mechanical construction by employing the best of my potentials,skills and attitudes earned in profession that will keep me abreast of the latest trends and practices followed in engineering and technology.
EDUCATIONAL ATTAINMENT:
* College graduate in the year 1990
(With Physics, Math's and Chemistry)
PROFESSIONAL QUALIFICATION:
a) Passed CERTIFIED WELDING INSPECTION CWI (AWS) Examination in 2004, from American Welding Society (AWS). Certificate Number: 04101391
b) Certification for Steel Works - QC (Information of Standards Technical Specifications and Procedures) from ABV Rock Group KB, (Site 5) Jeddah.
c) Passed short term application course in Inspection and Quality Control Techniques from Pakistan Industrial Technical Assistance Centre.
d) ASNT Examination and Training courses for NDT Personnel (Reference QL-E-0013) from ABV Rock Group, Medinah (K.S.A) in the following disciplines:
* Radiographic Testing Level II
* Magnetic Particle Testing Level II
* Dye Penetrant Testing Level II
* Leak Testing (Direct Pressure) Level II
* Leak Testing (Vacuum Box) Level II
* UT Thickness Gauging e) NDT Examination and Training courses (ISO-9712) from National Centre for Non-Destructive Testing (NCNDT), Pakistan Atomic Energy Commission, Islamabad (Pakistan) in the following disciplines:
* Radiographic Testing Level II
* Magnetic Particle Testing Level II
* Dye Penetrant Testing Level II
* Ultrasonic Testing Level I
f) NDT qualification in accordance with the ASNT (American Society for Nondestructive Testing) Recommended Practice No. SNT-TC-1A (Current Code Accepted Edition) from Heavy Mechanical Complex Limited (HMC), Pakistan in following disciplines:
* Radiography Testing Course Level II
* Magnetic Particle Testing Course Level II
* Dye Penetrant Testing Course Level II
OTHER COURSES:
1. Personnel Safety training from ABV Rock Group KB.
2. Fire Fighting & Extinguishing Training from ABV Rock Group KB, Jeddah, K.S.A.
3. Radiation Safety training from DNSRP (Directorate of Nuclear Safety & Radiation Protection) Islamabad, Pakistan.
4. Certificate of Achievement from COMSTECH-PAEC on Non-Destructive Testing course.
PROFILE:
Highly professional and experience in mechanical construction of piping, structural and equipment installation in power plants, gas plants, oil refinery, fertilizer plants, boilers, pressure vessels, pipeline, and storage tanks as per international codes and standards i.e., Aramco standards, Sec II "A" and "C", ASME V, ASME VIII Div.1, ASME IX, ASME B31.3, AWS D1.1, API, British standards, DIN standards, ASTM, and Chinese standards.
WORK EXPERIENCE:
Over 13 years of experience (7 1/2 years in K.S.A and 6 years in Pakistan) in Welding Inspection and Non-Destructive Testing.
DEC 18,2004 TO JAN 07,2005:
Company: SGS Pakistan (Pvt.) Ltd.
Project: Gurguri Gas Plant, Karak, Pakistan.
Client: MOL Oil & Gas Co. B.V (Hungarian)
Position: Welding Inspector (TPI)
Department: Inspection
DEC 1996 TO APR 2004:
Company: ABV Rock Group KB
Project: Saudi Strategic Storage Program
Site-5, Jeddah & Site-7, Medinah
Client: Saudi Aramco
Position: QC Welding Inspector/NDT Technician
Department: Installation and Commissioning
Section: Quality Control/Mechanical Completion
DETAILS OF WORK PERFORMED/ACHIEVEMENTS:
Employed at Saudi Strategic Storage Program (SSSP) in K.S.A which involves construction of underground oil storage tanks, associated structural steel, pipe works, power generation facilities, platforms, etc as per ASME and API standards.
Actual work involves performing following activities in accordance with ABV Quality System based on ISO-9001:
* Perform RT, MT, PT, LT, Pneumatic Testing and Hardness Testing.
* Conduct Visual Inspection of welds.
* Review WPS/PQR.
* Control of welding activities in accordance with approved WPS and PQR.
* Witness the welder's performance qualification test in accordance with ASME Sec.IX and specifications.
* Control of Welding activities such as before fit up, during fit up, during welding and after welding as per relevant WPS and specifications.
* Control of NDT activities and formulation of all quality documents.
* Material Verification Inspection as per requirement.
* Conduct/Witness of destructive testing for procedure and WPQT.
* Witness of Hydrostatic Testing.
* Review Job Packages before final closeout.
* Interpretation of RT films.
Oct. 1990 to Nov 1996:
Organization: National Center for Non-destructive testing and Pakistan Welding Institute (NCNDT & PWI)
Client: Pakistan Atomic Energy Commission, Islamabad.
Position: Inspector
Department: QA/QC/NDT
DETAILS OF WORK PERFORMED/ACHIEVEMENTS IN K.S.A:
General:
* Code knowledge i.e., ASME B31.3, AWS D1.1, API 1104, API 5L, API 650.
* Responsible for reviewing requisition & purchase order.
* Coordination with client for vendor's inspection.
* Inspection at vendor's premises.
* Inspection of incoming material.
* Preparation of vendor evaluation reports.
* Checking project specification compliance at the quotation stage.
* Conducting quality audits of vendor's/suppliers and sub-contractors.
* Documentation review (QCP, ITP, method statements as per project specification)
* WPS and PQR preparation and review.
* Qualification and certification of welders as per ASME Sec IX.
* Visual Inspection according to code and standards.
* Review of reports of PWHT and Hardness test.
Process Piping & Pipeline (as per API 1104, ASME B31.3):
* Review of drawings.
* Review and approval of WPS & PQR.
* Inspection of incoming material.
* Inspection of piping fabrication, erection and welding at site and workshop.
* Inspection of valve testing activities.
* Review and approve welding inspection reports.
* Check the welding parameters according to WPS.
* Fit up checking.
* Punch list preparation.
* Witness of hydro test, pneumatic test and leak test.
* Internal cleaning by water flashing, air blowing, pigging and drying.
Gas line materials (Line Pipe, Gas Regulators, Gas meters, and Forged Fitting during manufacturing):
* Inspection of incoming materials (HR Coils, Aluminum ingots, M.S iron bar).
* Check the dimensional and physical condition.
* Monitoring the process of manufacturing.
* Visual Inspection of welding.
* Dimensional inspection (length, diameter, wall thickness, and bevel angle).
* Bend test and hydro test of line pipe.
* Leak test of forged fitting and gas regulators.
Tanks:
* Inspection of lower pressure and high pressure storage tanks.
* Witness of welder's qualification test.
* Fit-up inspection of shell plates and vertical joints.
* Visual welding inspection.
* Vacuum box testing of bottom plates.
Steel Structure:
* WPS and PQR preparation and review as per AWS D1.1.
* Witness of welder's qualification test.
* Fit-up inspection.
* Visual welding inspection as per AWS D1.1.
* Dimensional inspection according to drawings.
Rotary and Stationary Equipment:
* Inspection of orientation, levelness, central alignment and verticality.
* Inspection of belt tensioning.
* Internal inspection of vessels and column as per drawings.
* Inspection of access steel work on column and vessels.
* Centering and reverse alignment before and after piping connections..
* Check the jackscrew and slide plates.
MAJOR PROJECTS IN PAKISTAN:
Worked as Welding/NDT Inspector in NCNDT, PAEC, Islamabad from Oct.1990 to Nov, 1996 on various projects:
* Inspection of 300MWe "Underground forced water pipeline" of CHASHMA NUCLEAR POWER PLANT at site Kundian, district Mianwali, as a sub-contractor of a well known Chinese firm CZEC.
* 80 vessels of stainless steel for CHASHMA NUCLEAR POWER PLANT.
* 44 SS storage tanks of 12mm thick & 4000mm dia. at Heavy Mechanical Complex-III, Taxila.
* Parts of wing of F-6 Fighter plane of Pakistan Air Force at F-6 Rebuild Factory, P.A.C, Kamra and padding foot of Cobra Helicopter of Pakistan Army Aviation.
* Welding joints of high temperature and high pressure test loop piping at Heavy Mechanical Complex-III, Taxila.
* Pre-service inspection of CHASHMA NUCLEAR POWER PLANT.
* Inspection of 0.39mm thick cane sleeves, heat exchangers, cladded vessels and welding plates for welder's qualification, at site Kundian.
* Inspection of 'I' beams and 'H' beams for erection of Chakwal Cement Plant.
* Inspection of OGDC drilling bits for VETCO, Islamabad.
View contact information... |