Resume - I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating ...

Misco Jobs

Resume #34828

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS:
* B.Sc. Mechanical Engineering, (Aeronautics), Cairo University, 1967.
* M.Sc. Mechanical Engineering, (Rotating equipment vibration analysis),
Ain-Shams University, Cairo, 1976.
* M.Sc. Mechanical Engineering, (Gas turbine design), Cranfield Institute of Technology, Bedford, U.k., 1979.
* Courses, Training, Conferences:
1. Operation & Maintenance of Ruston Gas Turbines, Doha, on June 1988.
2. Maintenance & Operation of Demag Compressors, Doha, on Oct. 1991.
3. Engineering Project Management Course, Qatar University, on Jan. 1993.
4. Improving Reliability in Petroleum Refineries and Gas Plants conference, Houston, Texas, USA, Nov. 1993.
5. The Fifth Turbomachinary Maintenance Congress, U.K., London, 1989
6. Dry Gas Seal and Magnetic Bearing Conference, Canada, Novacorp, 1992
7. Internal Auditor Training Course by BVQI, Doha, 1996.
8. Emergency Control Center, QVC, Sept. 2003.
9. Work Management Process Training course, Dubai, Oct. 2003.
10. Fault Identification (HAZOP, FMEA) Doha, May 2004.

PREVIOUS EXPERIENCE AND HISTORY:
Jan. 2001 to Present:
QVC (Qatar Vinyle Company), Mesaieed, Qatar
"Head of Maintenance Support Section"
Supervising the activities of the following divisions:
* Planning Division
* Engineering Division.
* Inspection Division.
* Warehouse and Material Division.
* Civil Division
In charge of:
* Coordinate and ensure the operation of the Section according to agreed budgets and polices.
* Develop strategies for project execution
* Select and manage modern tools for project management
* Control project execution effectively and efficiently
* Plan and organize the activities of the Section for the most efficient utilization of available staff and working hours.
* Ensure that qualified resources are available at optimum level in the Section, and initiate recruitment and/or training needs as required.
* Participate in the annual budget preparation procedures, providing input to other Sections in Maintenance and Production Department and carry the responsibility for collecting information and workout budget for own Section.
* Develop organization according to needs, motivate the Staff, and ensure the training of Qataris.
* The position has a specific responsibility for the following tasks:
- Prepare, organise and perform modifications and projects ( PMP ).
- Technical advisor for production- maintenance- departments.
- Drawing and construction control/approvel
- Updating of technical flow sheets and equipment register
- Perform technical inspections and reports
- Short and long term planning
- Civil maintenance tasks
- Maintenance and operation of buildings
- Responsible for painting, schaffolding and insulation
- Responsible for negotiations of frame contracts
- Responsible for technical filing/document control.
- Maintenance and development of the plants technical standard
- Spare parts (Stock control, ordering, receiving, refurbishment, and distribution).
* Extend the service of his staff outside normal working hours by keeping sufficient trained personnel on a 24 hours call duty roster.
* Insure that all work should meet official standards and good engineering practice.

Oct. 1987 to Oct. 2000:
Qatar General Petroleum Corporation, Off – shore Operation (QGPC)
Doha, Qatar.
Maintenance Department.
From March 92 to Present:
"Head of Maintenance Engineering Division (MCE)"
Supervising the activities of the following five section heads:
* Rotating Equipment section.
* Instrument / control section.
* Electrical section.
* Mechanical section (Inspection of static equipment)
* Document control / Drawing office section.
In charge of:
* Preparation of maintenance policies, general and technical procedures, maintenance programs, contract scope of work and maintenance planning.
* Technical assistances to offshore maintenance in-house or contractor's staff.
* Preparation of scope of works and follow-up executions of contracts for main equipments repair and major overhauls.
* Following-up resolution of outstanding problems with contractors / vendors.
* Yearly budget preparation and administration.
* Different types of NDT of topside equipments.
* Engineering and implementation of plant modifications.
* Review of engineering standards, project specifications, vendor data and documentations for approval.
* Witnessing F.A.T. of critical packages as end user representative.
* Supervising site construction and commissioning of all new installations.
* Review Engineering Dept. feasibility studies of new projects.

From Oct. 87 To March 92:
"Rotating Equipment Section Head (MCE / 2)"
Supervise the activities of three rotating equipment engineers who are responsible on monitoring, trouble shooting and inspection of following fleet of equipments, using either in-house or contractored out man power: -
- Three tandem Mansemann Demag centrifugal gas compressors.
- Three G.E. Frame 5 gas turbines (each 22,000 hp).
- Twelve RGT turbogenerator sets (each 2.3 Mw).
- Ten crude oil loading pumps (different makers) driven by RGT TA/TB.
- Eight high speed Sundyne pumps electric motor driven.

From Oct. 1984 to Oct. 1987
ENPPI (Engineering for Petroleum and Process Industries)
Machinery Section Head:
In charge of:
- Technical execution of new projects which includes:
* Generation of different rotating equipments specifications.
* Preparation of tender document, vendor's clarifications and bid evaluation.
* Review and comment vendor data, drawings and specifications.
- Responsible for the planning, reporting of project 's progress.
- Administration staff of the section.
- Section budget preparation.
- Evaluation of site commissioning reports
- Preparation of project hand-over documents.

From Oct. 1981 to Oct.1984
ENPPI
Senior Machinery Engineer:
In charge of:
- Responsible for the technical execution of assigned projects / jobs.
- Preparation of required specifications, mainly for rotating equipments.
- Attend vendor clarification and kick-off meetings.
- Supervise site construction, commissioning and start up.
Some of assigned projects:
- Gulf of Suez gas plant (160 MMSCFD).
- Offshore gas gathering station (GUPCO Unit 108).
- Abu-Madi LPG plant, phase II.
- Assuit Crude Oil Refinery.
- Other small projects and technical assistances.

From Oct. 1967 to Oct. 1981
Arab Organization for Industrialization (Military Factory 135)
From 1975 to 1981
Gas turbine Specialist:
Served as lead mechanical engineer in gas turbine testing, developing and performance evaluation. Participated in most gas turbine design activities.
General Organization for Aviation (military Factory 135)

From 1967 to 1975
Mechanical Testing Engineer:
Served as testing engineer in mechanical laboratory, conducted different types of mechanical tests on semi and / or finished critical parts of gas turbine internal, evaluated gas turbine mechanical behavior, dynamic performance and condition monitoring of gas turbines on services.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6351 to 6400 of 15341)

Go to Search Parameters...

Brief Description

Resume CV: To join an offshore drilling company as Rad. operator, Logistics Coordinator any place in the world

I would prefer to work as Commissioning Supervisor in the Middle East.

Objective Production engineer, oilfield engineer, or mechanical engineer in a contracting firm.

Dear Sirs, I am 33 yrs. old, from Romania, Electrical Engineer. I would like to get a job in electrical/administrative petroleum/oil/gas field. Even I've have a Diploma in Electrical field I can accept to work as electrician, technician, foreman, or engineer.

20 years experience in non-destructive testing and inspection as a technician, radiation safety officer, division manager, and project manager.

NACE Certified Coating Inspector #7278, with +20 years of experience, available as (3rd party) Q.A./Q.C. coating inspector, coating surveyor, coating supervisor, vendor surveillance, etc.

I have been working in the Construction Industry for 40 years at all levels up to Construction Manager. I have extensive experience overseas including Africa and Asia. I am looking for similar work and am prepared to work anywhere at immediate notice.

Maintenance of: - Simovert - frequency regulation for the speed control of High Power asynchronous motors 450 KW and 110 KW - Frequency regulation for the speed control of Low Power asynchronous motors - High Voltage switchgear equipments - MCC - Switchgear equipments - Low Voltage -ETC...

I 'm Canadian citizen, I have second class marine engineer.

25 years of experience all over the world in the instrumentation field including 12 years offshore oil platforms, erecting, construction, precommissioning , commissioning and start-up a wide range of pneumatic, hydraulic and electronic instruments, DCS – ESD – F&G systems.

Process Engineer

I accumulated 22 years of experience in the oil industry, most of the time with the Schlumberger service company in the area of Oilfield Services management, Reservoir Evaluation Wire line and Testing.

I have 21 years in Aust Army as Maint Planner/Supervisor with Diploma Engineering (Maint). Experienced trainer in Mincom Logistics computer systems. Willing to relocate nationally or internationally for the right position.

Over twelve years experience in Offshore and Onshore Oil & Gas and Marine Structure Development in National & International government projects. Project engineering management, Engineering, Design, Construction and Project cost estimation.

WORK EXPERIENCE I have 14 years of experience in plant F.C.C ( Fluid Catalic Craking ).Refinery El Palito in Venezuela ( PDVSA ) and experience in Pre commissioning

Over 25 years of exploration drilling and mining experience. Responsible for the coordination of drilling projects in both domestic and international environments.

I was employed by ARCO Indonesia Oil & Gas since April 1980 thru March 1999. My last position was Elect/Instr Supervisor of NGL gas plant refinery located at NorthWest Java sea, for offshore facilities. My current employer is BP-Indonesia, position job as Maintenance Planner.

26 years Mechnical Design Engineering 16 years CAD experience including intensive 3D modeling 14 years product design experience. 12 years manufacturing tooling and facilities experience.

23 years experience in the Electrical Distribution/Electrical Contractor Industry. Wish to acquire a part time or full time position in an office or job site environment.

Job objective: General Supervisor, Field Supervisor, Project Manager or Assistant Project Manager. Interested in overseas opportunities.

Objective: Seeking a career position with a progressive organization where my skills , training and extensive knowledge and experience can be fully utilize, while offering the opportunity for continued career growth.

Highly experienced purchasing and material management professional. Specialized experience in remote, severe climatic locations. Extensive experience in cross cultural work situations.

Curriculum Vitae „h Over 25 years of oilfield experience in Canada „h Mechanic on a seismic crew until tools were stolen „h Roughneck to driller, 11 years as a driller on a drilling rig „h Owner/operator of a vacuum truck business „h Mechanically inclined

BS EE from USA. I have over 14 years of experience in maintenance and projects while working with reputable organization like Exxon, Mobil, Occidental and BP Pakistan in fertilizer, petrochemical and oil/gas E&P industries.

OVER THIRTY YEARS EXPERIENCE AS A FULLY CODED WELDER ALONG WITH FOREMAN, SUPERVISER AND WELDING ENGINEER/CHIEF WELDING ENGINEER POSITONS ALSO UNDERTAKEN ALONG WITH NORMAL WELDER POSITION.

Seeking employment where my years of experience in surface & underground mining & construction, as well as my strong sales, contracting, consulting, and management skills can best be used

Chemical engineer w/ experience in developing various contracts in oil, gas, water, waste treatment & soil road maintenance. Expert w/ performance based contract. Possesses good organizational, team & interpersonal skills. Adept at working & communicating across disciplines & management levels.

Looking for a new challenge at the end of 2003 my present contract end then

Operate, commission and monitor equipment in assigned areas, maintaining parameters with the guide lines of the operating manuals and procedures of 80,000BPD three phase separation multi train crude separation units, 110 MMSCFDgas compression& treatment plants

Strategic Planning Business Development Project and Business Valuation

I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects.

Nobody has climbed up through the steps of success with his hands in his pockets.

Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering

I completed my degree in Electrical Engineering and had taken and passed the highest National Examination in The Philippines, Professional Electrical Engineers Examinations in 1986. I have a good experience in Oil and Gas, Controls, Fire and Gas Systems, Design, Detailed Autocad Drafting(Isometric),

Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.

Associate Degree in Mechanical Engineering Draughting, 10 years Experience in various Mechanical and Plant Layout applications, using Inventor, Autocad, Pro Engineer, MSC Patran. Heavy Engineering Environment, International Earth Moving Machinery Manufacturing Company in South Africa.

BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Experienced exploration / production geophysicist and geologist with major Exploration Companies

22 years oil field Experians. Higher secondary.

Over 23 yrs of heavy earth field mechanic. AAS in Heavy equipment and diesel Technology. Lack final semester for BA in Training Industry & Business. CAT and Kamatsu trained.

AutoCAD, PDS (3-D modeling). Lead engineer of erection department

I hold a degree in Polymer Eng. from the Federal University of Technology Owerri, Nigeria. I am proficient in Autocad 2D/3D modelling, HYSYS, Bentley Auto Plant/P&ID, Boiler Maker, Autodesk Inventor

HIGHLY COMPETENT IN BUILDING AND ROAD CONSTRUCTION WORK(B.ENGINEERING,CIVIL)

Instrumentation technician with nine years experience in maintenence,repair,calibrating and installing of electrical,electronic and pnuematic equipment.

Mechanical Engineer with manufacturing experience

I am an electrical engineer. its been 3 years then when i start practicing my profession.my first year of experience was as a machine technician in manufacturing company.after that ,until now i am working on power plant construction as an intrumentation and control engineer.

BSc Degree in Geological Engineering with 3 years experience in both exploration and mining. Good knowledge in Surpac and MapInfo with discover. I am a good team player with the ability to innovate and motivate.

Self motivated geophysicist engineer with knowledge in Petrophysics and seismic business.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 [ 128 ] 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out