Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #35719 next resume »»
CONTACT INFORMATION:
View contact information...

EDUCATIONAL QUALIFICATIONS: Degree in Mech.Engg.(B.Tech)
Computer Proficiency: Primavera P3, MS Projects, MS Office Etc.

EXPERIENCE IN YEARS: 10 years

CURRENT EMPLOYER
FACT (The Fertilizers And Chemicals Travancore Ltd., A Govt.of India Enterprise having an annual turn over of more than Rs.1800 crores.) The FACT Ltd., is having two production units for producing Fertilizers and one Petrochemical Division for producing 50000 TPA of Caprolactum. FACT also have consultancy division (FEDO), Engineering works (FEW) division and a Marketing division.

JOB KNOWLEDGE
Maintenance, Repair, Overhauling of static and rotating equipments, turbo machineries in Petrochemical plants (Turbines, Centrifugal and reciprocating compressors, Diesel engines,Pumps, Strippers, Distillation Columns etc), Safety permits, Shut down works, Preparation of periodical and predictive maintenance programs and planning, Inventory control, Failure analysis, Maintenance Performance Evaluation, Work permits, Supervision, Coordination, Preparation of Material request for equipment spares, modification materials in compliance with specification requirements, co-ordinate with procurement for the clarification/approval requirement for the timely material delivery, Work at port installations etc.

Preparation of tender documents for subcontracts, Inviting bids, Evaluation of bids, technical and commercial recommendation, Negotiation with the bidders, prepare Work Orders, etc.

Conversant with relevant material codes and standards, Planning software like primavera, MS projects etc.

Work experience & Nature of Jobs handled:

1. From 1995 October to 1998 September –Mechanical Engineer (Maintenance)- Cyclohexanone Plant (FACT Petrochemical Division having a capacity of 50000 TPA of Caprolactum)

Involved in the maintenance activities of Fired Heat exchangers, Turbines, Centrifugal compressors, Reactors, Strippers and distillation columns, Pumps, Piping, valves and fittings, refractory, Flame stack etc.

2. From 1998 September 2003 March- Mechanical Engineer (Maintenance) Ammonia Plant

In charge of the 600 TPD ammonia plant Mechanical Maintenance dept Involved in the maintenance activities of Heat exchangers, boilers, Turbines, Centrifugal compressors, Reactors, Reformers, Horton Sphere, Strippers, Pumps, Piping, valves and fittings etc.

3. From2003 March- 2004 May Assistant Manager (Mechanical)

Involved in the fabrication and laying of 600NB Dock line (cross country piping 16 KMS) for Indian Oil Corporation- Project cost was Rs.60 crores

The job involved route survey, fabrication and laying of 600NB( 2 nos) pipe from tanker berth at Ernakulam to irimpanam terminal for transferring petroleum derivatives like motor spirit, kerosene, naphtha, motor spirit and high speed diesel.

4. From 2004 May to till date Assistant Manager (Mechanical) Maintenance- Ammonia Handling, Acid, Sulphur, Rock Handling Plants

The ammonia Handling Plant consists of liquid ammonia unloading systems to unload the ammonia from the ship, 10000 MT storage tank, pumps, compressors, and safety systems and loading systems etc. The raw material site consists of pumps for acid loading and fire systems, tanks, conveyors, Motors, gearboxes, ship unloader (MAN Germany make) etc.

Reference:
Upon request

View contact information...
«« previous resume next resume »»
Search Results (Resumes 8001 to 8050 of 15498)Go to Search Parameters...
Brief Description
Working as a Sales engineer in a well established LLC. It’s a 20 years old company which deals with Instrumentation, Automation, Compressors, Air Operated Pumps, Valve Automation, Pneumatic Tools, Transmission Products and Material handling.
HSE, Risk Assessment & Loss Prevention Engineering in Oil & Gas Field
I had a diploma of INTERNATIONAL WELDING ENGINEER in central metallurgical researches and development institute under certification of IIW (international institute of welding). Certificate no IWE AT 0708.. I worked in EMEC as a Drilling fluid Engineer in syria from 3/2009 till now.
BE Mechanical, Good surveying and project management skills, Sales and Marketing
My unique mix of previous work experience combined with my completion of the Associate of Applied Science Degree in Process Technology makes me an ideal candidate for employment with your company.
10 years experience with crane, lifting and rigging. certified in all aspects. looking for a professional company with potential for advancement
I have a keen interest in science and its application towards solving problems. I am a creative individual who takes initiative when the situation calls for it. I am very determined and believe in completing what I start, from the planning phase, to the design phase and ultimately the implementation
Field Tech Mechanic
I'm 31 years old working as a condition monitoring engineer in Badr Petroleum Company joint venture with SHELL company where my nature of job is to manage and develope predective maintenance programme for rotating machinery through vibration analysis, lube oil analysis and thermography
I am a young professional with BSc Geological Sciences degree, working for exploration company in the position of GIS Intern. I'm self motivated and always in the position to be taught and I'm very fast to understand the need and applications that may be required by any employer.
I am a petroleum engineer from UT-Austin. I want to go offshore for my first full time job. I enjoy being in the field over the office. I will be up to any task that is required.
Geophysicist, Information technology & Communication, Network Engineer, System Administrator, Hardware & Software developer
Key responsibility of Marketing and selling our Products like ATC, Auto Loader, Chillers & Coolers, Hypoid Motors, Telescopic Covers, Rotary Tables, Spindles for south India Region.
I have over ten years experience in the building and facility maintenance and management. I hired and trained technicians for HVACs; Carpentry, Plumbing, Electrical, Appliance Repairs and Mechanical. I graduated from vocational high in Air-Conditioning and Refrigeration.
Working at SUI FIELD GAS COMPRESSOR STATION (SFGCS), having daily throughput of 600 MMSCFD
Graduate Mechanical Engineer with ASNT level-2 NDT and CNC part programming .
Hands of experience with good knowledge of engineering (standards) & trouble shootings working with one of the major such as Qatar Gas, other than working with petro power plant, oil/gas industry & Heavy metal industry
To work in a challenging and stimulating environment envisaging personal growth and career development by associating with an organization, which provides an ambience for learning and growth, where my problem solving talents and designing skills can be utilized.
Panel operator with over 10 years experience in gas receiving facilities, looking for overseas experience
Senior Drilling Engineer & Supervisor
Maintenance, Repair, Overhauling of static and rotating equipments, turbo machineries in Petrochemical plants (Turbines, Centrifugal and reciprocating compressors, Diesel engines, Pumps, Strippers, Distillation Columns etc), Safety permits, Shut down works, etc.
WELDING INSPECTOR CERTIFIED WITH B.E MECHANICAL
Bachelor of science degree holder with skills in mineral exploration
am energetic agrresive,have interpersonal skills good communication skills,profficient in microsoft suites and a bsc degree
2 yrs exp in piping engg and pdms ,mechanical engineer
.Bacholar Degree In Chemical Engineering. Two Year Experience As Drilling Fluid Engineer.
Document controller, 2-year experience with the largest private master developer in the UAE
B.E.S (Equivalent to Master) Environmental Sciences
Plate welder (SMAW,FCAW,GTAW)
Bsc Environmental Health, certificate in advanced project management,2years experience in the field of environment, computer literate
Mechanical, Fitter, Basic Welder and Electrical
8 years comprehensive experience as a Senior Condition Monitoring Technician in Oil & Gas / Petrochemical / Fertilizer Industries in Middle East, like RasGas LNG Company Limited Qatar, Kuwait Oil Company (K.O.C), Kuwait, Fertilizers and Chemicals Travancore LTD (FACT) Cochin, Petrochemicals etc.
Eleven years of hands-on experience and proficiency with Autocad Architectural Desktop, including version 2008
Exploration geologist with two years of experience in the uranium exploration field.
Qualified Civil Engineer (BE Hons) having Experience in Excecution, Planning, Billing, Monitoring. Currently working with GMR (Badrinath) Energy Ltd.as an Executive -Civil (site) on a 300 MW Hydro Power Generation Project
Ship Design Engineer - Piping & Machinery
welder
Having qualified as a construction plant Fitter (heavy diesel Mechanic) in October 2000, I joined the Caterpillar Dealer for Ireland, McCormick MacNaughton. I started my employment as a Fitter in the workshop for two years. Then I got promoted as a Field Service Engineer in January 2003.
Independent Professional Landman with 8 years of experience in running title, lease acquistion, due diligence, curative, surface damages, ROW and easements , permits and environmental issues with Federal and State regulatory agencies, including Phase 1,2 and 3 ESA and remediation.
Eight years of experience in Oil and Gas industry and Stimulation positions with experience in drilling, tools, and cementing. Strengths include knowledge with all Frac fluid systems, frac equipment, stimulation techniques, coordinating, and teamwork.
BE IN MECHANICAL ENGINEER. I HAVE 2 YEARS EXPERIENCE IN STRUCTURAL STEEL ERECTION
Strong backgroun in all asspects of Integrated Petrophysics from data acquisition and qyality check, Open and Cased Hole formation evaluation and reservoir monitoring, formation pressure analysis, to petrophysical parameters and Core Analysis skills.
Three year working experince in field of hydrogeology and hydrochemistry.
Project Manager
Experienced sandblaster/painter/foreman/safety tech
Engineer (Insulation, Painting, Fireproofing, Hvac, Scaffolding & Refractory)
Knowledgeable in fossil fuel (coal), power plant bulk materials operations. International experience.
Control room operator-process operator-gas-lift operator-gas dehydration-..
I am a Chemical Engineer with Seven years of experience. My experience can be divided in to two main categories; industrial and consulting, on air and wastewater, treatment, operation and maintenance encompassing permit applications, work plans for regulatory compliance in the areas of Environment,
Total Experience 14 Years – [Gulf 10 Years & India 4 Years]
First   Prev   151   152   153   154   155   156   157   158   159   160   [ 161 ]   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   189   190   191   192   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com