Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #35734 next resume »»
CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVES
Augment scientific knowledge of hydrology and flood related disaster prevention.
Facility work amongst scientists in different fields.
Improve hydrology awareness in education and policy.

EDUCATION
Kyoto University, Japan, Doctor of Engineering, October 2005.
Thesis title: Hydrologic Model Comparison and Refinement through Uncertainty Recognition and Quantification.
Advisor: Kaoru TAKARA

National Taiwan Ocean University, ROC, Master of Science, June 1997.
Advisor: Kwan Tun LEE

National Taiwan Ocean University, ROC, Bachelor of Science, June 1995.
Department of River and Harbor Engineering

PROFESSIONAL EXPERIENCE
Post-doctor researcher
Disaster Prevention Research Institute, Kyoto University, Japan, October 2005 \ present.
Working under the supervision of Prof. Kaoru TAKARA, within the Division of Disaster Management for Safe and Secure Society, joining the System Modeling Approaches for Assessment of Interactions between Social Change and Water Cycle Project of the Core Research for Evolutional Science and Technology (CREST) Program, which is one of the special programs of Japan Science and Technology Agency (JST)

Research Assistant
Disaster Prevention Research Institute, Kyoto University, Japan,@June 2005 \ September 2005.
Disaster Prevention Research Institute, Kyoto University, Japan,@June 2003 \ February 2004.
Dept. of River and Harbor Engineering, National Taiwan Ocean University, ROC, September 1997 \ July 1998.
Worked in the Watershed Hydrology and Hydraulics Laboratory, under the supervision of Prof. Lee. Used DELPHI to program a software for watershed geomorphologic factors extraction and design discharge calculation.
Dept. of River and Harbor Engineering, National Taiwan Ocean University, ROC, September 1995 \ July 1997.

Account Officer
Dai-ichi kangyo bank, Taipei branch, ROC, July 2000 \ March 2002.

PUBLICATIONS
Journal paper
Chiang, S., Tachikawa, Y. and Takara, (2004). gRainfall-runoff simulation by using distributed instantaneous unit hydrograph derived from applying flow accumulation value of DEM, Annual Journal of Hydraulic Engineering, JSCE, vol. 48, pp. 1-6.
Chiang, S., Tachikawa, Y. and Takara, (2005). gAn approach to uncertainty identification in hydrological modeling,h Annual Journal of Hydraulic Engineering, JSCE, vol. 49, pp. 211-216.
Lee, K. T., Chung, Y.-R., Lau, C.-C., Meng, C.-C., Chiang, S. (2005). A windows-based inquiry system for design discharge based on geomorphic runoff modeling, Computers & Geosciences, In Press, Corrected Proof, Available online 25 July 2005. (SCI)

Conference paper
Lee, K. T., Meng, C. C., Chiang, S., and Chung, Yi-Ru (2001). An inquiry system for design discharge in small and midsize watersheds, Proc. of the 3rd International Conference on Watershed Management, Taipei, Taiwan, pp. 243-252.
Chiang, S., Tachikawa, Y. and Takara, (2003). A flood simulation by using Rainfall-runoff simulation by using distributed instantaneous unit hydrograph derived from applying flow accumulation value of DEM, 22nd Conference of Japan Society for Natural Disaster Science, Kouchi, Japan. (18-19 September 2003) pp. 143-144.
Chiang, S., Tachikawa, Y. and Takara, (2004).
Modeling a Physical-based Watershed Hydrologic Response Function through Applying Land Use, DEMs and Time-Area Diagram, Annual Conference of Civil Engineers 2004, JSCE Kansai Chapter, II-11, Shiga Prefecture, Japan (22 May 2004).
Chiang, S., Tachikawa, Y., Kojima, T. and Takara, (2004). A new hydrologic response function physically derived from dem and remote sensing image, Proc. of the 2nd Asia Pacific Association of Hydrology and Water Resources (APHW) Conference, July 5-8, 2004, Suntec Singapore International Convention Exhibition Centre, Singapore, vol. 2, pp. 268-275.
Chiang, S., Tachikawa, Y., Kojima, T. and Takara, (2005).
Prediction uncertainty in hydrologic modeling: A methodology for uncertainty recognition and quantification, Proc. of the Monitoring, Prediction and Mitigation of Water-Related Disasters (MPMD-2005) Conference, Jan. 12-15, 2005, Clock Tower Centennial Hall, Kyoto University, Kyoto, Japan, pp. 281-286.
Chiang, S., Tachikawa, Y. and Takara, (2005).
Hydrological model evaluation and comparison through uncertainty recognition and quantification, VIIth International Association of Hydrological Science (IAHS) Scientic Assembly, Foz do Iguasu, Brazil (3-9 April 2005), CD-ROM.
Chiang, S., Tachikawa, Y. and Takara, (2005).
Methodology for hydrologic model quantitative comparison - an example by using SFM and TOPMODEL, Annual Conference of Civil Engineers 2005, JSCE Kansai Chapter, II-1, Osaka, Japan.
Chiang, S., Tachikawa, Y. and Takara, (2005).
Hydrological model quantitative comparison, Proc. of Hydrology and Water Resources Annual 2005, University of Tsukuba, Japan (3-5 Aug 2005), pp. 34-35.

Report and the others
Chiang, S., Tachikawa, Y., Kojima. T. and Takara, (2004).
Physically-based Hydrologic Response Function Derived from DEMs and Remote Sensing Image, Annuals of Disaster Prevention Research Institute, Kyoto Univ., no. 47B, pp. 227-234.
Chiang, S., Tachikawa, Y. and Takara, (2005).
Hydrological model prediction uncertainty recognition and quantification, Annuals of Disaster Prevention Research Institute, Kyoto Univ., no. 48B, printing.
Chiang, S. (2005). Hydrologic Model Comparison and Refinement through Uncertainty Recognition and Quantification, Thesis of Doctor of Engineering, Kyoto University, Japan.

TECHNICAL SKILLS
FORTRAN
ArcGIS
IDRISI
ERDAS IMAGINE
Mike11

View contact information...
«« previous resume next resume »»
Search Results (Resumes 9551 to 9600 of 15435)Go to Search Parameters...
Brief Description
I am a eager person with 12years diamond mining experience at present I am the production supervisor and my role entails meeting set targets of carats, mining rate and square meters. I run a department of 12 people, and is responsible for educating them with the marine and safety laws.
Sales and Operations manager highly business oriented and objective driven
Piping Engineer, Mechanical
Now, Gen. Mgr. - Projects EPC Contractor at Kazakhstan
Environmental Engineer/Scientist with over thirty years of experience with project and program management, industrial hygiene, hazardous waste and material management, modeling, monitoring, regulations, risk and technology assessment, pollution control, and environmental remediation
Proven analytical skills, ability to work under pressure, quick learner adaptable, self- initiative, good listener, experience in office-based practice, communication skills, programming Skills, hard working and posses knowledge.
Properly carry out construction wok including supervision of projects as directed by project or Design Engineer. College Diploma in Construction Trade, National Technical Certificate, Federal Trade Test Certificate, National Diploma in Building Technology
Camp Boss
Worked with BOROUGE as MECHANICAL SUPERVISOR through TECNIMONT from 11th MAY 2008 to 11th JAN 2009.
Service Engineer, Completed Aircraft Maintenance Engineering (3 Yrs)
Over three years title experience in the Barnett Shale. Experience leasing in the Barnett Shale and Fayetteville Shale. Advanced experience using ESRI GIS mapping software.
Instrument Technician with maintenance and commissioning experience
Fifteen years experience in the oil and gas industry. Five years overseas work experience in Libya and Indonesia. Experience working on onshore and offshore projects. Experience with a variety of equipment including centrifugal pumps, gas compressors, pressure vessels, piping.
I am a Heavy equipment operator /crusher mechanic/welder, I am looking for a better employment.
I am open pit mining technician with experience in drill and blast, load and haul and pit services. I have worked for both precious metal (gold) and base metal operation(chrome) in senior positions.
Doctor of Engineering, Department of Civil Engineering, Kyoto University, Japan.
Looking for a bright career in the field of Supply chain Management.
I completed my Diploma in Electrical from MS University in year 2007 after that to at present I always working on AutoCAD for different Companies jobs as per them requirement.
Currently attending Saint Tech College and will be graduating in may.
I am qualified in operating, pipefitting, welder's helping, laboring, parts, and mechanic helping.
Operations manager with 30 years experience in the mining industry.
Application for the post of Safety Officer
Project Manager / Engineer, Private & Public Sector Experienced
Safety Supervisor
Application for the Post In Engineering Department
Skills: Architectural/Engineering: Well trained and experienced using AutoCAD 2000LT to AutoCAD 2009, PLS-CADD, Microstation V8, Artist Rendering, Illustrations, Freehand Sketches, 2D Modeling, CAD Presentations
Interpersonal abilities, Communication skills, 25 years of supervisory experience, Organizational strengths, Analytical/problem solving skills, Administrative, coordination, and management skills, Strong initiative
Seeking a challenging career with in a reputed Company
Proficient in Document Management System & Secretarial Functions
This is essakkipandi, I have 6 years experiance in oil & gas industryI am working in Flour daniel India )p) Ltd,Delhi as Instrumentation Designer. I have studied Diplomo in Electrical & Electronics Engineering, Now i am lookink for Instrument designer join in USA.
Mechanical Engineer with 3 years of experience in electrical instalations
More than 6.5 half years in Documentation with Oil and Gas Related Projects and have a very good expossure in Programming
B.E Civil - 2001
Has been working for an EPC company for eight (8) years with experience in handling such projects of different magnitude both Onshore and Offshore, from grass roots to revamps, tender, FEED (Front End Engineering Design) then to engineering & procurement. Knowledgeable in INtools.
Free! I am a production geologist with over 15 years experience across a wide range of commodities including base metals, copper and gold in both open cut and underground environments.
Total 9.5 years DOCUMENTATION experience including QA/QC, CERTIFICATION and PROJECT DOCUMENT CONTROL CENTER in GAS and OIL Projects with Multi National Companies.
Engg.graduate with exp.in projects at various Breweries in India
actual position: Senior well site geologist
Having a long-lasting interest in mineralogy, I am willing to find a job that will allow me to use and expand my knowledge and analytical skills in the field of mineral exploration.
Senior Qa/QC For Oil/Gas Projects
Senior Electrical/Design/Project Engineer for HV and MV substations
Environmental Health & Sustainability (EHS) specialist with project management and consultancy experience in political and corporate environments. Keen ability to build internal/external consensus to implement projects, start to end. Effective communicator with
Proficient in drafting submittals (2D & 3D) and/or shop drawings prior for construction up to As-built Drawing. Multi-disciplined: Architectural, Structural, Mechanical (including Plumbing & Piping, HVAC, and Fire Fighting), Electrical (including Lighting, Grounding, Telephone & Data, Fire Alarm, a
Qualification; B.Sc (chemistry), Skills; plant operation, precommissioning and commissioning
About eight years of solid experience in designing and implementation(execution) of structural works
LP Modeling, Refinery Planning & Scheduling, PIMS, Process Simulation and Optimization
Certified PMP, with Onshore & Offshore Projects Experience with good Communication skills. Qualified Mechanical Engineer with Project Management skills & Leadership qualities.
Diploma in Chemical technology, 14 years oil field operations experience in onshore and offshore in India and State of Qatar
My working career is coverd with Petrochemical plant structural detail design and offshore jacket type platforms basic and detail design.In the field of offshore i am qualified in in-place, earthquake, dynamic, spectral and determinestic fatigue, transportation, lifting and lunch analysis.
Operating reciprocating compressors [5.3mw] and centrifugal compressors [3.5 mw], multistage centrifugal pumps, various types of dosing pumps etc. Handling various liquids such as LPG, naphtha, kerosene, gasoline and gases like refinery fuel gas, hydrogen etc.
First   Prev   151   152   153   154   155   156   157   158   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   189   190   191   [ 192 ]   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com