Resume - Start-up engineer on power plant control systems, Foxboro I/A, Bailey, GE Mark V...

Misco Jobs

Resume #3673

CONTACT INFORMATION:
View contact information...

Summary:

I offer over twenty years of technical experience in all phases of applications of instrumentation and controls in the petro-chemical, refinery, power plant and co-generation facilities. This includes construction, installation, maintenance, calibration and trouble-shooting of process and control loops.

Experience:

GE Baglan Bay Project Port Talbot, Wales
HRSG Commissioning Engineer
Responsibilities included Loop checks; functional testing of all the controls logic and modifications to the GE Mark VI HRSG code. Further responsibilities included process tuning and graphic modifications, on the first 500MW gas fired single shaft steam cooled combined cycle unit.
(06-02 to 10-03)

Tuas Stage II Power Station Singapore
BVI/Mitsubishi Project
Lead DCS Commissioning Engineer
Responsible for the Factory Acceptance Test (FAT) of the control logics on two 360 MW gas fired single shaft units. Activities included the design, implementation and testing of logic changes to enhance the existing DCS configuration. Further duties incorporated the supervision of two fellow DCS engineers as well as two Foxboro TA's assigned to the project, initial power-up, installation and testing of the Foxboro I/A 6.2, interfacing with the owner/owners engineers. Loop testing of over 12,000 I/O plant wide, finalization of the mark-ups (red lines) to be revised and issued to project.
(12-00 to 03-02)

BVI/TECO Tri Energy Project Ratchaburi, Thailand.
Instrumentation Start-up Engineer
On a 700MW facility consisting of two GE Frame 9 FA one GE Steam Turbine. Responsibilities included Instrumentation commissioning and pre-performance instrument calibrations. Initiated the installation to automate gas block valves from the DCS. Plant and DCS support during the final stages of completion of the project.
(05-00 to10-00)

JBV San Jose, Guatemala (JA Jones/Black & Veatch)
San Jose Power Station
DCS Startup Engineer
For the commissioning of one DB Riley coal fired unit with a 122 MW Mitsubishi Steamer, equipped with a Foxboro I/A system. Responsible for loop checks, function testing and the modifications of the control logics. Process tuning and graphic modifications along with operational support. Verified proper system installation and grounding.
(07-99 to03-00)

Thai/Nepco Ayutthaya, Thailand
Rojana Power Project
DCS Startup Engineer
For the commissioning of two IHI 47mw gas turbines and one ABB 38mw steamer, equipped with a Foxboro I/A system. Responsibilities included Loop checks; function testing of all the controls logic and the modifications. Further responsibilities included process tuning and graphic modifications. Also assisted in the resolution of instrumentation problems throughout the plant.
(01-99 to 06-99)

Stone & Webster Gurut, Indonesia
Amoseas Geothermal Project
DCS Startup Engineer
Duties consisted of the startup of the Bailey INFI 90 system and loop verification of the plant controls and instrumentation on an 80MW unit. Further responsibilities included the function testing of the controls, logic and graphic modifications. As well as plant documentation that pertained to my responsibilities.
(09-98 to 01-99)

Fluor-Daniel/Air Products Map Ta Phut, Thailand
Bangkok Co-generation Co. ( BCC ) 112mw Facility
DCS Startup Engineer
Duties consisted of functional testing and modifications to both the logic's and the graphics of the Bailey INFI 90 system. Insured proper grounding and installation procedures were followed during the installation of the system. Worked with the Thai technicians assigned to Fluor-Daniel and the contractors to insure that the instrumentation was installed according to details and that the calibrations were performed properly.
(02-98 to 09-98 )

Black & Veatch Melaka, Malaysia
Melaka Combined Cycle Conversion Project
Instrument & Controls Startup Engineer
Assigned as a commissioning and startup engineer. Responsibilities included the input-output termination and the logic verification of the instrumentation to the Bailey INFI 90, further responsibilities included the testing of the DCS I/O for the 415v, 6.6kv, 11.5kv and the 132kv switchgear. Setup of the motor operated valves and the Copes-Vulcan control valves. Technical advisor for field modifications of instrument installations to the instrumentation construction contractor. Startup of the Nooter-Eriksen HRSG 1&2 and the G.E. 120mw steam turbine.
(05-97 to 01-98)

Elf Atochem Calvert City, Kentucky
DCS Start up Engineer
For the commissioning of the F-134A refrigerant plant, equipped with a Bailey Infi 90 DCS and a Triconix ESD system. Responsibilities included tag and trend database configuration as well as cad modifications to the EWS (function codes). Also involved in the graphics revisions and the tuning of the system loops.
(03-97 to 05-97)

GE/OVA Elektrik Istanbul, Turkey
DCS Start up Engineer
For the commissioning of the balance of the plant of this GE 320 mw 209E IPP equipped with a Foxboro I/A DCS. Accountable for the DCS compound and block configuration revisions and alarm prioritizing, etc. Training and supervision of the Turkish I&C personnel in field instrument calibration and DCS configuration. Field instrumentation consists of Foxboro Intelligent Transmitters, Nuovo Pignone valves and Eckardt positioners.
(08-96 to 11-96)

Bayer Premier Co. Map Ta Phut, Thailand
Instrumentation Supervisor
Responsible for the instrumentation group and field modifications of the poly and cwd areas. Field responsibilities included instrumentation calibration and revisions, consisting of tubing, piping, installation, grounding, etc. The DCS is the Fisher Provox, I have experience on this system comprised of engineering unit and range modifications loop verification of 4-20 ma analog input/outputs, discrete input/outputs, etc. Interfaced with management on scheduling and the updating of plant documentation and verification ( As builts ) of the electrical and instrumentation drawings.
(05-96 to 08-96)

Rayong Refinery CO. LTD Map Ta Phut, Thailand
Control Room Coordinator/Supervisor
Assignment included the supervising and training of the Thai technicians in the use of the Foxboro I/A DCS revision 4.2 as well as the configuration, comprised of engineering unit changes, compound block configurations ( AIN's, AOUT's, CAlC, LEAD/LAG, ETC. ) process and control loop tuning. The failsafe system is the Pepperl &Fuchs, I was responsible for the testing and the acceptance of this system on all of the compressors and the light oil systems. Also assisted in the terminations and check out of the Foxboro I/A and Pepperl & Fuchs interconnection cabinets. Direct involvement in the refineries commissioning and start up.
(07-95 to 05-96)

Enron Corp. Houston, Texas
DCS Startup Engineer
Responsible for the graphics display changes, loop tuning and the modification of the compound and block configurations on the Foxboro I/A 4.2
(04-95 to 06-95)

Alabama Power Demopolis, Alabama
Instrument Supervisor
Responsible for commissioning and start up of five GE frame seven 80 mw gas turbines controlled by the GE Speedtronic Mark V DCS.
(02-95 to 04-95)

Saudi Consolidated Electric CO. Dammam, Saudi Arabia
Systems and Controls Engineer/Supervisor
Assignment consisted of the maintenance and instrument engineering modifications on four 650 mw gas fired steam plants. Plant instrumentation consisted of various types transmitters and valves Honeywell, Rosemount, Yokogawa, Fisher, Valtek both smart/conventional. The boiler and turbine controls consisted of the Bailey Net 90 and Mitsubishi. Other responsibilities included the maintenance on two desalination plants.
(04-94 to 12-94)

Florida Power Corp. St. Petersburg, Florida
Instrument Technician/Supervisor
Duties included the implementation of engineering changes and troubleshooting of the control systems and the replacement or calibration of the instrumentation, such as Fisher valves, Rosemount Transmitters, pressure and level switches, damper drives both pneumatic and electrical, Bailey positioners, level and pressure controllers. Maintained the Foxboro I/A DCS.
(10-86 to-04-94)

Education:

Graduated Melbourne High School
Melbourne, Florida

Degree in Electronics, Florida Community College
Jacksonville, Florida

Military Training

Basic Electricity and Electronics Class B ( 02-18-77 )
Interior Communications Electrician Class A ( 08-22-77 )
Miniature Component Repair ( 12-02-77 )
Micro-Miniature Component Repair ( 12-06-77 )

Instrumentation and Controls Courses

Process Measurement Fundamentals ( 01-89 )
Process Controls Fundamentals ( 01-90 )
Microprocessor ( 11-89 )
Microprocessor troubleshooting ( 11-89 )
Foxboro I/A Series Systems Maintenance ( 02-90 )
Foxboro I/A Series Systems One ( 06-92 )
Systematic Troubleshooting ( 01-92 )

Work Related Skills and Experience

Basic computer skills in windows
Proficient in the use of test equipment ( Oscilloscopes, VOM, ETC. )
Experienced with Turbine Supervisory Instrumentation ( Bentley Nevada, GE )
Experienced with DCS systems (Foxboro I/A, Yokogawa, Bailey Infi 90

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6451 to 6500 of 15341)

Go to Search Parameters...

Brief Description

I am a well-motivated person, honest, serious, confident in all aspects. I got my high school diploma with A grade and have been accepted in the medical college. Infortunately not completed due to political reasons at that time in my country.I speak fluently Arabic, English , French, a little German

I am mechanical engineer with 14 years experience in preventive & predictive maintenance for reciprocating & rotating machinery in the oil & gas industry. I have computer & software skills for office and maintenance applications. I have BS Mechanical Engineer degree from the UIS University.

Over eighteen years in QA/QC, inservice and T/A inspection, inspection planning and refinery reliability tasks.

Multi disciplinary engineer

A Mechanical Engineering Graduate with a total of 13years experience in oil & gas, petrochemical and food processing plant.

Information systems - Analyst /Programmer/Project leader/Business Analyst

Marine Engineer with 30+ years experience in operating, designing, installing and commissioning marine systems

PhD in physical chemistry. 8 years experience in environmental management, monitoring, damage evaluation and quality system. previously worked in Battelle Memorial Institute structure. previously worked in Saudi Arabia. focused, hard worker, responsible with high leadership skill.

CRO/LEAD OPERATOR. OFFSHORE Oil/Gas production platform. Three phase seperation, wellbay, hydrocyclones, compression, dewpoint control, asociated utillities. Gas plant H2S removal, adsobsion, solvent regen, sulphur recovery, tail gas unit. Cryogenic N2 removal, mol sieves, cold box etc. Refinery exp

3 year Diploma holder in electrical Engineering 13 years total experience as senior Industrial Electrician in which 3 years are in LPG plant. Ready to work anywhere.

Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction, Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants.

14 years of professional experience as Chief Accountant and Accountant in reputed companies. Excellent in Accounting, Auditing, and Preparing Account related documents for all needs of a company. Hands on experience in Microsoft Office and Accounting packages like Daceasy, E.X. , Tally etc.

I am a well-organized and reliable Instrument Engineer with over 25 years experience within the Petrochemical, Nuclear, and Power & Water Industries. My project involvement has included offshore & onshore maintenance, inspection, construction, and commissioning at technical and supervisory levels.

Start-up engineer on power plant control systems, Foxboro I/A, Bailey, GE Mark VI, and Yokogawa.

Multifaceted, proactive, and highly motivated professional seeks position within the mining, construction, transportation, or chemical process industry combining solid skills and diverse experience

Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Self starter, hands on in fabrication/construction supervision, trouble shooting, scheduling/conflict resolution of different trades on complex plant construction.

Inspection high pressure vessels and supervision pipe-lines in Europe. Quality Assurance & Quality Control in nuclear power plant - crew 7 people. Quality Control, punching, hydro-testing of pipe systems - crew 10 persons.

Heavy Duty Mechanic Certificate -IP:K-06-14390 Inter-provincial Red Seal Certificate -23 years experience in the mining field -16 years experience as Heavy Duty Mechanic (underground and open pit)

30 years experience with Land Based Drilling Rigs that include SCR, Mechanical, Mobil and Heli Rigs ranging from 800 to 3000 HP, Familiar with Topdrives both Hydraulic and Electric

Finance Professional with extensive experience in accounting, internal and external financial reporting, systems, business planning, operations analysis and international operations. Leadership experience in both corporate and operating unit environments, within the United States and Latin America.

Mechanical Engineer (MOS) Refinery and Petrochemical Equipment Degree. Level II SNT-TC-1A for Magnetic Particle, Dye Penetrant, xRay examination, Project Manager course in U.K.

Experienced Contracts Engineer, Planner, Estimator having worked successfully in all aspects of the industry from North Sea to Australia. Enjoys the challenges of new technologies and new ideas

Presently working as a CONTRACTS ENGINEER for the last several years with a Multinational Company in the Gulf. Seeking higher and prospective opportunities.

My expertise includes waste-to-energy facilities along with gas and oil fired boilers and all their associated equipment. I have experience in turbines up to 70 MW’s. I would make a good fit into any type of power plant weather it be in operations, maintenance, supervision or management.

Chemical Engineer with Masters Degree in Environmental Engineering and Management. Areas of experience include, hazardous waste management, remediation & cleanup, environmental impact assessment ISO 14000 and environmental audit.

I am a driven and focused individual who knows how to set goals and work to achieve them. Outstanding skills/competencies in Materials Management, Inventory Control and Accounting. Pro-active and results-oriented with the talent for identifying and solving problems.

Over 25 years of diverse and successful experience in material control in areas including: Nuclear/Coal Power Generation, Bulk Handling & Storage, Co-generation, Commercial Maintenance, Oil Refinery, Warehouse/Distribution, Shutdown/Turnaround and Outages.

Experience in all phases of material management & expediting, design office & engineering & project coordination. Experience in heavy construction including offshore oil platforms & related facilities, nuclear fuelled power plants, paper mill, chemical plant & overseas military facilities.

Over twenty-four years of professional experience as a planner, scheduler, estimator, project engineer and supervisor in the industrial construction, maintenance and turnaround fields of the petrochemical, paper and pulp, power generating textile manufacturing and offshore industrial industries.

I am a Graduate Mechanical Engineer and have good proficiency in Computers. I have put in 13 years of hard work in Construction of Oil & Gas Pipelines, which has given me exposure in all fields like Project Management, Planning, Tendering, Cost Estimation and Control, Execution.

OBJECTIVE To secure a position within a growing organization in which my talents, attributes and experience could be utilized to their maximum potential.

For the last twenty five years I have mainly been working of shore. I have worked in various over sea countries mainly in Asia. In that time I have done horizontal long reach, sub sea completion’s, HPHT wells and worked in H2S areas

Last employer: Lidl Ireland Ltd. as District Manager. International experience

25 years petrochemical I&E experience, engineering, and operations assistance...Process Safety Management/Procedures writing...training manuals...PowerPoint, Word, Excel...Startups, Commissioning, Shutdowns, Safety Enforcement, Inspections

Geodesist/Land Surveyor/Geomatics/GIS consultant

Obtain a full time position in the oil field services industry. To be part of a world class Oil Services Company would be a welcome move for myself. I insist on providing a quality product and feel most fulfilled when I achieve this goal

-20 years of North American & international Petroleum engineering experience, including reservoir simulation. Strong technical skill ,ability to communicate effectively, -updated several large simulation models, and developed new reservoir simulation models for multiple oil fields.

I am a graduate from a Safety Engineering Technology Program. I have twenty-two years experience in the health & safety field in the areas of mining, oil & gas, manufacturing, and construction industries.

Thirty years experience in the construction, fabrication, and pipeline industry. Have expertise in a variety of areas from years of hands on experience, to Forman, Superintendent, and Management. QC/QA, Safety, Project Management, Consultancy, (Economic/Mechanical), job efficiency, Materials.

33 years experience in drilling industries, started as rig hand, since 15 years drilling supervisor, drilled several types of wells in different countries on and -offshore.

International Finance Manager with extensive experience in the upstream oil and gas business.

Project Manager with over 35 years of experience in the construction industry, which offers an extensive and diversified array of industries such as power generation, pharmaceutical, semiconductor, large office facilities, pulp/paper and plastic projects, coal gasification and others.

Proven ability in Purchasing, Expediting, Procurement QA/QC Coordinator, Material Control, Material Coordinator, Logistics and Warehousing. Developed and implemented Material Control and Warehouse Procedures. Proficient in SAP, MS Word and Excel. Bilingual, fluent in English and conversational Thai.

39 years experience in mining , open cast and underground . administration , planning operation including safety.

29 years oilfield experience from roustabout to site manager.

i have over 20 years experience in the oil and gas industry of which have been in the materials/logistics role

Extensive electronics/instrumentation installation, troubleshooting and repair of subsea control systems. This was analog/digital to the component level; this was accomplished on systems controls and computer monitoring , and subsea modules to the board level repair.

20 years + WSS, proficient in Completions (Land, Platform, Sub Sea, Tender, Jack Up) also single, duals, electronic, Wireline, Coil Tubing, HWO. Service Industry background (Otis and Baker Oil Tools). Current contract finishing Sept. As per CV, willing to work in all countries.

Over 25 years of experience in projects related to mechanical process, material handling and mining. Experience in field engineering, construction, and preparation of conceptual and detail drawings, material take-offs and cost estimates.

ONSHORE-20 Years. Set-up and supervise Mechanical Operations & Maintenance duties. OFFSHORE PLATFORM-4 years. Oil & Gas offshore Platforms Maintenance instruction to Maintenance staff. Identify and control all replacement spares and equipment of all offshore plant and equipment.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 [ 130 ] 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out