Resume - Operate, commission and monitor equipment in assigned areas, maintaining paramet...

Misco Jobs

Resume #3764

CONTACT INFORMATION:
View contact information...

26 Years of wide experience out of which 9 years Oil & Gas Field in SYRIA
AL FURAT PETROLEUM COMPANY, DAMASCUS, SYRIA (SYRIA-SHELL)
Employed by Gray Mackenzie Oilfield Services (GMOS), Dubai/Damascus
May. 2000—TILL DATE ( 3.5yrs.)

Position SENIOR PRODUCTION OPERATOR
Nature of duties & responsibilities

Monitor the process parameters, control and ensure the continuity of Production and report faults when identified. Assist Production Supervisor in day-to-day activities.
Hands-on experience in Panel Operation as well as field Operations. Maintaining log books and prepare daily production reports, feed back & assist Prod. Supervisor.

DIER EZZOR PETLOEUM COMPANY DAMASCUS SYRIA (ELF SYRIA)
Employed by Dietsmann, Ipedex Abu Dhabi/Damascus

Aug. 1994—Apr 2000 ( 5yrs 8 months.)

Position PRODUCTION OPERATOR
Nature of duties & responsibilities
Actively involved in commissioning of Jafra CPF, which consists Separators, Desalters, Water heaters, Dehydration, Shipping, Wash water treatment, Produced water treatment Water injection &Slop oil recovery system etc.

-Monitor the process parameters, control and ensure the continuity of Production and report faults when identified. Assist Chief Operator in day-to-day activities.
-Assisting Chief operator in following the work permit system&list out when it is not adhered to.

THE FERTILIZER CORPORATION OF INDIA LIMITED

June1977--Jan 1994 ( 16yrs 7 months.)

Positions Operator Gr1, Sr opr, Asst Foreman, Asst project Engineer&Asst Plant Manager
Nature of duties & responsibilities

Worked in utility plant, which includes unloading, storage, loading, and dispatch of various crude oil products and petro chemicals like heavy furnace oil, LSHS, light diesel oil, methanol and nitric acid etc

- Worked as special signatory of the work permit system
- Well familiar in maintaining tank firm area having high capacity storage tank complex
Tel no 0091 98402 68291
Email ID rameshbabu200153@yahoo.co.in harishkolli@rediffmail.com
- Having commendable knowledge about flame arresters, breathers, flow meters, pneumatic level gauges, mechanical level gauges and electronic digital integrators etc
- Well conversant with the operation of gear pumps, centrifugal pumps and compressors etc.

3 education
TECHNICAL QUALIFICATIONS:

DIPLOMA L.M.E. (MECH ENGG)
Grade First Class, 1974
Institute M B T S GOVT POLYTECHNIC
A P technical board, INDIA.
GRADUATION A M I E (MECH ENGG)
Institute THE INSTITUTION OF
ENGINEERS INDIA
DURATION 1983-1987

4 certifications
TRAINING UNDER GONE

SAFETY ACCREDITATION |
NORM |DEIR-EZ-ZORE PETROLEUM
FIRST AID CO. SYRIA|
DEFENSIVE DRIVING

5 skills

Computer Skills Word, Excel etc

Proven track records of trouble shooting and recommendations for production optimisation and cost reduction measures.
6 additional information
-Second responsible signatory of work permit system in oil &gas field.
-Safe preparation of equipment for maintenance work, ensure that risk assessment control measures are in place.
-Completes log sheets and maintains a daily log of all events occurring in the assigned area. Gives and/or receives verbal hand over at the start or end of the shift.
-Draft operating procedures when required.
-Ensure emergency or safety equipment, spill equipment together with protective systems are functional at all times.
_Attends in house training and safety meetings, participating in safety mock drills&log the events.
-Miscellaneous duties including house keeping, sampling, well testing and receipt and storage of chemicals.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6401 to 6450 of 15508)

Go to Search Parameters...

Brief Description

Dear Sir/Madam, I am an experienced offshore Rig Electrician. Please find enclosed, my resume for your consideration.

I am I have worked extensively on both land and offshore rigs. I always try to perform my job to the best of my ability, with safety to personnel as my #1 goal.

Water industry: French citizen w/U.S. Green card; 27+ years experience in construction & operations and maintenance; electromechanical and site management skills; specialist in process component for W/WW systems

I had more than 20 years experience in Gas Processing plant, previous company I worked for LNG Plant and last position as Utilities Senior Operator and Present company I have been working for Gas Processing as field operator.

Resume CV: To join an offshore drilling company as Rad. operator, Logistics Coordinator any place in the world

I would prefer to work as Commissioning Supervisor in the Middle East.

Objective Production engineer, oilfield engineer, or mechanical engineer in a contracting firm.

Dear Sirs, I am 33 yrs. old, from Romania, Electrical Engineer. I would like to get a job in electrical/administrative petroleum/oil/gas field. Even I've have a Diploma in Electrical field I can accept to work as electrician, technician, foreman, or engineer.

20 years experience in non-destructive testing and inspection as a technician, radiation safety officer, division manager, and project manager.

NACE Certified Coating Inspector #7278, with +20 years of experience, available as (3rd party) Q.A./Q.C. coating inspector, coating surveyor, coating supervisor, vendor surveillance, etc.

I have been working in the Construction Industry for 40 years at all levels up to Construction Manager. I have extensive experience overseas including Africa and Asia. I am looking for similar work and am prepared to work anywhere at immediate notice.

Maintenance of: - Simovert - frequency regulation for the speed control of High Power asynchronous motors 450 KW and 110 KW - Frequency regulation for the speed control of Low Power asynchronous motors - High Voltage switchgear equipments - MCC - Switchgear equipments - Low Voltage -ETC...

I 'm Canadian citizen, I have second class marine engineer.

25 years of experience all over the world in the instrumentation field including 12 years offshore oil platforms, erecting, construction, precommissioning , commissioning and start-up a wide range of pneumatic, hydraulic and electronic instruments, DCS – ESD – F&G systems.

Process Engineer

I accumulated 22 years of experience in the oil industry, most of the time with the Schlumberger service company in the area of Oilfield Services management, Reservoir Evaluation Wire line and Testing.

I have 21 years in Aust Army as Maint Planner/Supervisor with Diploma Engineering (Maint). Experienced trainer in Mincom Logistics computer systems. Willing to relocate nationally or internationally for the right position.

Over twelve years experience in Offshore and Onshore Oil & Gas and Marine Structure Development in National & International government projects. Project engineering management, Engineering, Design, Construction and Project cost estimation.

WORK EXPERIENCE I have 14 years of experience in plant F.C.C ( Fluid Catalic Craking ).Refinery El Palito in Venezuela ( PDVSA ) and experience in Pre commissioning

Over 25 years of exploration drilling and mining experience. Responsible for the coordination of drilling projects in both domestic and international environments.

I was employed by ARCO Indonesia Oil & Gas since April 1980 thru March 1999. My last position was Elect/Instr Supervisor of NGL gas plant refinery located at NorthWest Java sea, for offshore facilities. My current employer is BP-Indonesia, position job as Maintenance Planner.

26 years Mechnical Design Engineering 16 years CAD experience including intensive 3D modeling 14 years product design experience. 12 years manufacturing tooling and facilities experience.

23 years experience in the Electrical Distribution/Electrical Contractor Industry. Wish to acquire a part time or full time position in an office or job site environment.

Job objective: General Supervisor, Field Supervisor, Project Manager or Assistant Project Manager. Interested in overseas opportunities.

Objective: Seeking a career position with a progressive organization where my skills , training and extensive knowledge and experience can be fully utilize, while offering the opportunity for continued career growth.

Highly experienced purchasing and material management professional. Specialized experience in remote, severe climatic locations. Extensive experience in cross cultural work situations.

Curriculum Vitae „h Over 25 years of oilfield experience in Canada „h Mechanic on a seismic crew until tools were stolen „h Roughneck to driller, 11 years as a driller on a drilling rig „h Owner/operator of a vacuum truck business „h Mechanically inclined

BS EE from USA. I have over 14 years of experience in maintenance and projects while working with reputable organization like Exxon, Mobil, Occidental and BP Pakistan in fertilizer, petrochemical and oil/gas E&P industries.

OVER THIRTY YEARS EXPERIENCE AS A FULLY CODED WELDER ALONG WITH FOREMAN, SUPERVISER AND WELDING ENGINEER/CHIEF WELDING ENGINEER POSITONS ALSO UNDERTAKEN ALONG WITH NORMAL WELDER POSITION.

Seeking employment where my years of experience in surface & underground mining & construction, as well as my strong sales, contracting, consulting, and management skills can best be used

Chemical engineer w/ experience in developing various contracts in oil, gas, water, waste treatment & soil road maintenance. Expert w/ performance based contract. Possesses good organizational, team & interpersonal skills. Adept at working & communicating across disciplines & management levels.

Looking for a new challenge at the end of 2003 my present contract end then

Operate, commission and monitor equipment in assigned areas, maintaining parameters with the guide lines of the operating manuals and procedures of 80,000BPD three phase separation multi train crude separation units, 110 MMSCFDgas compression& treatment plants

Strategic Planning Business Development Project and Business Valuation

I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects.

Nobody has climbed up through the steps of success with his hands in his pockets.

Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering

I completed my degree in Electrical Engineering and had taken and passed the highest National Examination in The Philippines, Professional Electrical Engineers Examinations in 1986. I have a good experience in Oil and Gas, Controls, Fire and Gas Systems, Design, Detailed Autocad Drafting(Isometric),

Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.

Associate Degree in Mechanical Engineering Draughting, 10 years Experience in various Mechanical and Plant Layout applications, using Inventor, Autocad, Pro Engineer, MSC Patran. Heavy Engineering Environment, International Earth Moving Machinery Manufacturing Company in South Africa.

BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Experienced exploration / production geophysicist and geologist with major Exploration Companies

22 years oil field Experians. Higher secondary.

Over 23 yrs of heavy earth field mechanic. AAS in Heavy equipment and diesel Technology. Lack final semester for BA in Training Industry & Business. CAT and Kamatsu trained.

AutoCAD, PDS (3-D modeling). Lead engineer of erection department

I hold a degree in Polymer Eng. from the Federal University of Technology Owerri, Nigeria. I am proficient in Autocad 2D/3D modelling, HYSYS, Bentley Auto Plant/P&ID, Boiler Maker, Autodesk Inventor

HIGHLY COMPETENT IN BUILDING AND ROAD CONSTRUCTION WORK(B.ENGINEERING,CIVIL)

Instrumentation technician with nine years experience in maintenence,repair,calibrating and installing of electrical,electronic and pnuematic equipment.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 [ 129 ] 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out