Resume - I have over 10 years of experience as a Rotating Machinery / Reliability Enginee...

Misco Jobs

Resume #3798

CONTACT INFORMATION:
View contact information...

EXPERIENCE

January 1997 - August 2003
Conoco Phillips, Trainer Refinery (PA)
Rotating Machinery / Project Engineer
(On Site Contractor working for Condition Monitoring Sales (CMS) from January to December 1997 – Hired full time as Conoco Phillips employee December 31, 1997)

Responsible for yard wide reliability of rotating machinery and interaction with the maintenance department, operations, and project / process engineers.

* Project Engineer for major overhaul of two Dresser Rand five throw HHE Reciprocating Compressors which includes full rerate of the running gear and installation of on-line monitoring system
* Project Engineer for numerous capital projects and retrofit of vibration monitoring systems on six (6) critical centrifugal compressors.
* Supervisor of machine shop and rotating equipment maintenance during temporary assignment.
* Responsible for overseeing overhauls of critical rotating machinery.
* Specify, purchase, and install new rotating equipment per API and Conoco Phillips machinery specifications.
* Supervisor of Condition Monitoring Program and Reliability Group Technicians (Conoco Phillips employees and contractors)
* Responsible for supervision of Refinery Mechanical Seal Upgrade Program.
* Responsible for all MOC's (Management of Change) concerning rotating equipment
* Responsible for the daily maintenance and upkeep of refinery's asset management system for rotating equipment (Empac – CMMS)
* Provide technical support for the maintenance, operation, and troubleshooting of the plant machinery.
* Investigate failures and recommends actions to enhance equipment reliability.
* Develop reliability improvements/upgrade plans for the plant rotating equipment.
* Implementation of general purpose and specialty lube and seal oil system upgrade projects.
* Provide technical support for planning and unit turnarounds and major maintenance activities related to rotating equipment.
* Key in creating database which tracks key performance indicators for the calculation of Mean Time Between Repairs and Annualized Repair cost for pumps, compressors, and turbines.
* Start up of condition monitoring program that was dormant for one (1) year.

January 1994 - December 1996
O'Brien Group, Inc.
Rotating Machinery Engineer

Responsible for analysis and correction of rotating equipment problems. The types of equipment range from small horizontal motor/pump sets to large steam turbine generator sets, including vertical pumps. Experiences in balancing large over hung, center hung, and cooling tower fans, and steam / gas turbines. Duties include, but are not limited to:

* Develop and implement test plans
* Collect and analyze time domain data using multi-channel digital recorders, data acquisition units, single and multi-channel FFT spectrum analyzers, oscilloscopes, and tracking filters.
* Recommend and perform corrective action, including single plane balancing.
* Conduct specialized modal and operating deflection shape testing, acceptance testing of rotating machinery.
* Provide Peach Bottom Atomic Power Station of PECO Nuclear complete outage support during the refuelling outage for Unit 3 in the fall of 1995. Duties include: Various startup testing of critical machinery, mapping of main turbine rotor weights and coupling weights, acquire routine walk around data, and assist in balancing and startup of main turbine generator.
* Provide Star Refinery in Map Ta Phut, Thailand with a complete walk around vibration database using Prism2 software from SKF Condition Monitoring. Setup includes walking down plant, setting up routes on paper, and setting up routes in computer database.
* Collect vibration data from the acceptance testing of the critical rotating machinery for Star Refinery. Machinery includes steam turbine compressors/generators and gas turbine generators. Acceptance testing at GE in Massachusetts, MAN/GHH in Germany, ABB/STAL in Sweden, and Nuovo Pignone in Italy.

EDUCATION

B.S., Mechanical Engineering, Pennsylvania State University, 1993

* Basic Ferrography and Wear Particle Analysis Training Course - Predict Technologies
* Industrial Bearing Maintenance and Service Course - SKF Bearing
* Advanced Rotor Balancing and Modal Analysis - RODYN Vibration Analysis, Inc.
* Maintenance of Reciprocating compressors - Dresser Rand
* HF Acid safety courses
* Management of Change Training
* Managing Safety: Techniques That Work for Line Supervisors with Audit Training – Dupont Safety Resources
* Fire and Safety Training – Conoco Phillips Trainer Refinery

Proficient with the following software and diagnostic equipment:

* SKF Microlog data collectors
* SKF Prism2 for Dos, Prism4 for Windows software, and Machine Analyst Software
* SKF M800 Vibration Monitors and Quikset Software
* Bently Nevada Vibration Monitors (3300, 7200, 5000, etc.)
* Bently Nevada 108 and 208 Data Acquisition Systems
* Microsoft Office Products

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8801 to 8850 of 15498)

Go to Search Parameters...

Brief Description

Experienced gas Pipline Engineer and Strong background in Petroleum Engineer

Senior instrument technician

Estimator / Quantity Surveyor

OBJECTIVE: To obtain a rewarding and challenging position in a growing company which will utilize my Construction Estimating / Project Management skills and abilities.

A system engineer with more than ten years experience in process control and oil field development and implementation.

Seeking mid to senior level position in project management of sector specific projects. Interested in environmental and social assessment, auditing, due-diligence, policy analysis, and corporate social responsibility. Would like to travel, conduct audits, manage clients, and business development.

16 years experience in construction Health, Safety and Environmental. OSHA 500 & 501, B-SAF (Behavioral Safety Audit Formula) developer. International experience. Active passport.

Key Qualities 10 years experience in plant design and piping lay-out. 4 years experience in using Intergraph’s PDS 3D system. Experienced in Auto Cad, Microstation, Autoplant 3D Finished PDMS training course, Modules 1 and 2

Senior engineer with extensive experience in environmental management, environmental software development and regulatory compliance and enforcement. Excellent People skills and well traveled in Europe and Southamerica. Military Clearance and References available upon request.

Field: Technical Services (Petroleum Fuels) Experience: 10 years (6 years in Petroleum Sector)

I have been associated for the past 10 years with Fertilizer & Petrochemical Industry. I have worked as a Senior Metallurgical Engineer with specialization in the field of welding technology, non-destructive inspection techniques & product analysis and its development.

Process Design and Commissioning of Raw Water Treatment Plant, Waste Water Treatment Plant, Demineralization water Treatment Plant, Tertiary Treatment Plants ,Solid and Hazardous waste management, Safety and Environmental Audits etc for mega oil Refineries and Petrochemical Complexes.

I have worked for over 10 years for Schlumberger Oilfield Services. My career with Schlumberger has involved mostly hard rock stimulation, some coal bed methane stimulation, coiled tubing and cementing. I have been involved in the design, execution and management of these areas.

Experienced (~10 years) specialist in electronics and IT / former army officer. Languages: German, English, Basics in French and Spain Skills: PLC, instrumentation, electronics, computers

Onshore pipeline(above ground/ buried)and Plant piping engineering and design. Stress analysis-using CAESAR-II, for static, dynamic, wind, earthquake, flange leakage, Slug, and Water Hammer analysis. Familiar with concerned codes viz.ASME,API,WRC,etc.

PRESENTLY WORKING AS VICE PRESIDENT - TECHNICAL WITH M/S.AEGIS LOGISTICS LTD.MUMBAI,INDIA

To secure a challenging senior middle level hierarchical position, as a professional Naval Architect, in a Modern Shipbuilding / Ship repair yard/ Oil, Gas or Offshore industry, worldwide, that offers both a challenge and a good opportunity for growth in career.

Environmental Scientist/Project Manager with more than six years experience managing projects totalling nearly $2M in value. Consistently of exceeding expectations. Superior writing/oral communication skills and interpersonal/analytical abilities. Willing to relocate and/or travel nationally/abroad.

A results driven professional with 7+ years experience in electrical engineering, production support and leadership.

My present Job as well as the work I did for Santa Rosa w/ the Syzemograph will be what pertains to the oil & gas Industry

Seeking a position where I will be able to use my knowledge and talents to meet my employer's expectation.

Work Experience of 7 years - presently working with GE Capital Intl Services in India (From past 5 years). Presently working as Asst Manager

static equipment, storage tanks, API650, pressure vessels, ASME, fluent English, good German, MSc, Bsc, petrochemical, oil

I am responsible for all instrumentation, maintenance modification, and repairs for plant machinery and furnace maintenance. I have strong supervisory experience in a petrochemical plant. My experience also includes extensive electrical/HVAC knowledge.

A Professional and Versatile QA/QC and Inspection Engineer with 10 years effective hands on experience in QA/QC ,NDT and Welding inspection,

Enthusiastic Environmental Geologist with MS in Geology

I have got very good experience in electrical projects execution please get me a suitable job in USA/UK/OVERSEAS

Production Geologist - Onshore Texas and Mid-Continent. Strong background in operations, log analysis and correlation, seismic interpretation and computer mapping, prospect evaluation, and well planning. Extensive background in fractured carbonates and horizontal drilling operations.

Graduate Mechanical Engineer with I firm foundation in power generation, mechanical-thermal design, solid modelling, heat transfer, CFD, thermodynamics, project management and manufacturing experience.

Position as Contracts Administrator using 10 years of experience as oil and gas industry contract consultant and contract compliance auditor.

DRILLING ENGINEER: Experience in drilling design engineering in horizontal, directional and verticals wells. Specialist in horizontal drilling, SAGD well drilling projects, trajectory well design, casing design, bit selection and drilling softwares. experience in drilling project planning.

Assistant Project Manager for Design/Build Company. Successful completion, on time and at budget for multi-residential projects. Company liaison for Owner and Clients. Responsible for research, analysis and response to insurance companies for plicy compliance

I am confident , professional heavy equipment operator , with over 15 years experience in a wide range of fields .

A self confident, motivated and energetic person, able to cope with rapid change in corporate culture, strong technical analysis, management and computer skill, able to work under pressure, willing to learn.

Seven years experience.

Almost 10 years of active experience in Coordinating Occupational Health, Safety and Environment activities

I am an international business transaction professional, with five years experience specializing in the rail transportation and oil industries. I am currently an MBA student specializing in international business.

As an active electrical designer within radar, sonar and instrumentation for ten years, Fabian has a unique experience with respect to product design and manufacturing efforts. His work within an ISO9000 system has produced solid craftsmanship, with due to diligence to Quality Control.

Engineer, 10 Years experienced, Construction management of industrial projects

I have Worked has Process Control Room & Field Operator in Indian Organic Chemicals Limited, Chennai, India for 14 years and has Control Room and Field Operator Oman Chemical Industries Limited (S.A.O.G), Oman for 2 years

Almost sixteen years of experience covering environmental management of large infrastructure developments, including mine sites, pipeline and transport corridor construction projects and offshore/onshore oil and gas. Experienced in a wide range of environmental and site safety issues.

Over 15 years experience of Project Management and Specialist Engineering on numerous project task forces in the oil refining and gas processing industry.

I have seven years of experiences in the field of water well drilling as a hydrogeologist .

More than 15 years of Oilfield experience and Drilling Services with Schlumberger. worked in many countries in different positions starting from Engineer Trainee to Staff Engineer, Rig Manager, Operations Manager and now (SDS) QHSE Manager worldwide.

I have over 10 years of experience as a Rotating Machinery / Reliability Engineer in various industries. I am looking for a full time or contract position overseas as a rotating machinery engineer.

Fully experienced manager/agent within the water/utilities industry

Excellent Safety Record. Excellent Communication Skills. Exemplary Drilling Record. Over 16 years of supervisory experience of oilfield personnel & operations.

Masters of Environmental Science, Masters of Industrial Hygiene, Diploma in Industrial Safety. 3 years of experienc in EHS field in process industries.

Processes Control lab to bulk,Water analysis,Textile auxiliary testing

as incharge operator at catalyst production unit and process operator at the ammonia plant Experience in units- : kneaders,extruders calciners,heaters,Turbines, Centrifugal compressors, Boilers, Super heaters, Reformers, MEA& HPC Systems

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 [ 177 ] 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out