Resume - Looking for a new challenge at the end of 2003 my present contract end then

Misco Jobs

Resume #3817

CONTACT INFORMATION:
View contact information...

RESUME

Coating Inspector / Manager

Nationality: British

References will be provided on request.

TECHNICAL QUALIFICATIONS

* Certificate for Coating Technology and Inspection
* Approved British Gas E.R.S. Painting Inspector No BG12598 (Equivalent to NACE 3 USA)
* Computer skills (Word. Excel. Simage)
* R.G.I.T. Five Day Combined Fire Fighting and Survival Courses (Including Wet Helicopter)
* Full Offshore Medical-Jan 2003
* USA Working Visa L1 until 2004

EMPLOYMENT HISTORY

PETRODRILL ENGINEERING NV
SENIOR COATINGS INSPECTOR /CONSULTANT
(LOCATION PORTLAND MAINE USA.
Employed as a Coating / Insulation Manager.
Duties included managing a work force of 50 painters, attending all QA/QC' Management & safety meetings.
Surface treatment work includes blasting and power tooling.
And all tank special coatings, and outside hull Drill floor. Accommodation etc. (Jotun paints)
Galvanizing, Fire proofing, Insulating A60, Accommodation, wall and doors etc. Floating floors, and Tiling,
ICCP and EAC Anti-fouling prevention Systems. Anode arrangement for water ballast /sea chest and outside hull
For the Construction of two Semi-submersible (Amethyst Rig Project)
Start contract July 2002 (Still at this location)

PETRODRILL ENGINEERING NV
SENIOR COATINGS INSPECTOR / CONSULTANT
(LOCATION ORANGE TEXAS USA.
Employed as a coating inspector / consultant.
Duties included attending all QA/QC' Management & safety meetings.
Surface treatment work includes. Galvanizing, Fire proofing, Insulating A60 for Engine room, Accommodation, wall and doors etc. Floating floors, Tiling,
ICCP and EAC Anti-fouling prevention Systems. Anode arrangement for water ballast /sea chest and outside hull
And all tank special coatings, and outside hull. Accommodation etc. (Jotun paints)
For the Construction of Semi-submersible (Amethyst Rig Project)
Duration of contract (September 99-July 2002) Transferred to Portland Maine USA

PETRODRILL ENGINEERING NV
SENIOR COATINGS ADVISOR/INSPECTOR
(LOCATION-KOREA DAEWOO HEAVY INDUSTRIES KOJE-SI.
Employed as a coating advisor/inspector.
Duties included attending all QA/QC & safety meetings. Hands on inspection of all
Surface treatment work includes. Galvanizing, Fire proofing, Insulating A60 for Engine room, Accommodation, wall and doors etc. Floating floors, Tiling,
ICCP and EAC Anti-fouling prevention Systems. Anode arrangement for water ballast /sea chest and outside hull
And all tank special coatings, and outside hull. Accommodation etc. (Jotun paints)
For the Construction of two Semi-submersbles (Amethyst Rig Project) Brazil (Petrobras)
Duration of contract (March 99-August 2000)

HEMPEL HAI HONG- COATINGS CO LTD SHANGHAI
SENIOR COATING INSPECTOR SPECIAL COATINGS
(LOCATION- CHINA TAIZHOU JING JIANG SHIPYARD
Employed as a coating advisor for over seeing of the steel preparation
Grit blasting and the multi coatings of the cargo tanks and slop tanks
Aboard the vessel Dawyani with the coating system HEMPELS HEMPADUR 1540 epoxy (Hands on inspections)
Duration of contract (Oct 98 Jan 99)

HEMPEL HAI HONG- COATINGS CO.LTD SHANGHAI
SENIOR COATING INSPECTOR SPECIAL COATINGS
(LOCATION- CHINA WU HO JIANG DONG SHIPYARD)
Employed as a coating advisor for over seeing the blasting and
Coating of the cargo tanks and slop tanks aboard the vessel Griya Asmat
With the coating system HEMPELS hempadur 1540 epoxy (Hands on inspections)
Duration of contract (Aug 98 Oct 98

MARATHON OIL LTD. - COATING CONSULTANT
(LOCATION - SOUTH KOREA DAEWOO HEAVY INDUSTRIES YARD)
Employed on contract for the Molikpaq Modification drilling rig Sakhalin 11 Project
Duties included hands on inspection of all surface treatment work including. Galvanzing
Fire proofing. Insulating. Thermal Sprayed Aluminum.and System 2000 and all special tank Coatings and ICCP system, and controlling/advising the repair's on the old systems
Duration of contract sail away (Dec 97 till Aug 98)

BOS AUSTRALIA PYT LTD - COATING CONSULTANT
(LOCATION - SOUTH KOREA, SAMSUNG HEAVY INDUSTRIES YARD)
Employed on contract for the STAG Central Production Facility Project for Apache Energy Limited.
Duties included hands on inspection of all surface treatment work including work, which was subcontracted by SHI to lower tier subcontractors. Providing technical advice to both Apache and BOS on issues related to surface treatment. And special coatings
Duration of contract sail away (may 97 till Dec 97)

DENHOLM INDUSTRIAL SERVICES LIMITED - COATING CO-ORDINATOR
(LOCATION - PLYMOUTH: CLIENT: MINISTRY OF DEFENCE)
Employed at the Royal Navy Dockyard, Devonport. Duties included overseeing work on Royal Navy Ships, Submarines, Caisson's and Flap Gates, Dock Gates. Coating scope of work included interior and exterior using various paint systems, i.e. waterborne, solvent free etc. Surface preparation methods included open blasting and vacuum blast, checking substrate after final blast for the application of surcustic tile to submarines. Preparation of daily inspection work permits, which were checked by the M.O.D. Resigned and appointed on the STAG Production Platform in South Korea.

SALAMIS - COATING CO-ORDINATOR
(LOCATION - ODENSE - LINDO DENMARK: CLIENT: MAERSK) F.S.P.O.
Duties included inspection of hull prior to blast. Submission of reports on changes to recommended systems, monitoring of all applied coatings and recording all relevant data for future maintenance purposes. Attended meetings twice a day with QA/QC Management and Hempel representatives. End of Contract

MILLBURN SERVICES - Q. C. / SITE REPRESENTATIVE
Work included inspection of substrate in Tanks and special coatings
And related areas, Inspection of the application of Carboline recommended products recording of R.H and DFT's. Attending meetings with contractor and client on progress and quality related issues through to project completion and hand over. End of Contract

VICKERS - INDUSTRIAL FABRICATIONS INSPECTOR
Duties included inspection of various substrates prior to application of metal spray by means of gas system, using both wires and power types. Exotic metals including Aluminum: Monell: Zinc.
Equipment worked on - hydraulic prop shafts: crane units and pressure vessels.

(LOCATION - South Shields: CLIENT: AMERADA-HESS)
Project: Semi Submersible conversion work including total blast of heli-deck topsides using auto-blast system and undersides with wet-blast systems. Application of various coats systems by multi-functional crew uses a variety of application techniques depending on specification. Completed the project through to hand over.

BION LIMITED - WORKING FOREMAN
Employed on the 1989 British Gas Morecambe Bay Project Hook-up working on the D.P.3. Duties included, full application of the British Gas Systems, i.e. urethane, acrylic, coal tar epoxy, and polyester system. The work was performed to meet stringent standard of the British Gas Inspection Team.

METNOR (SWAN HUNTER SHIP BUILDER LIMITED) - FOREMAN / APPLICATOR
To oversee the smooth running of the application of zinc metal spraying to naval ships, engine rooms and engine beds prior to installation of machinery and instruments.

RIGIDON OFFSHORE LIMITED (NINIAN FIELD NORTH SEA) - FOREMAN / APPLICATOR
To oversee and assist in the application of glass flake polyester system to the internals of six offshore production separators of various sizes. Work included, grit blasting to S.A.2.5, application of a holding primer, trowel application of glass flake with an overall thickness of 3.5mm. After cure, conducting spark test to ensure the integrity of the system prior to hand over and re-introduction to service.

MANERSMAN G.M.B.H. (SUB-CONTRACTED TO BRITISH GAS) –
COATING TECHNICIAN
The Project involved the laying of a 36² gas pipeline from Scotland through to England, after three days training in Germany on the application of fusion blinded Epoxy (F.B.E.), through a jacket and heat induction unit. I worked on this Project for five months, applying the system to all the pipe lengths, joints and valve tie-ins.

TYNE DOCK ENGINEERING - SPRAYER
Duties included the preparation of the surfaces by mechanical and blasting techniques, depending on client's specifications. Application by airless and conventional spraying methods i.e. zinc silicate, epoxies and various coating system finishes. All work was carried out under full client inspection. End of Contract

BARRIER COATING LIMITED (U.K.) - BLASTER / SPRAYER
During my time with Barrier, I worked on various Projects for different client's e.g. SHELL, CONOCO, and BRITOIL. My work moved from blasting pipework and support steel in a blast chamber, internal work through to final hand over.

TYNE DOCK ENGINEERING (U.K.) - INSPECTOR
Work included checking and recording of substrate profile, WFT, DFT and RH on various projects including tankers, container and cargo vessels. During my time with this organization. I was responsible to oversee that the main contractor carried out all works to the required spec. This work involved blast and application of various coatings to ships hulls, tanks, double bottoms and side tanks including forward and after peeks, saddle tanks, water ballast tanks and holds etc. This position was closed due to a short fall in the number of contractors.

BECHTEL: SONATRACH - INSPECTOR / SUPERVISOR
Algeria, North Africa G.M.E. 48² Gas Pipeline 530 Kilometers total length. Materials - Protocol U.T.32.10.R applied up to 4mil in thickness. Work on main line field joints, including the terminal and block valves the project required me to learn various new skills in order to operate high-tech eqpt that was deployed on site to apply the above named product.

PILELINE PROTECTION LIMITED (NORTH EAST ENGLAND) - INSPECTOR
Work included inspection of substrate condition prior to application of Bitumastic Coating to internal and external areas of 24² to 36² Pipe Spools. Recording D.F.T.'s and carrying Q.A. checks prior to release.

PIPELINE INDUCTION HEAT - INSPECTOR
CLIENT - STATOIL
Work included inspection of fusion bonded Epoxy Coatings, surface profile / surface cleanliness, metal temperature control (using temperature indication crayons), and elastometric spacers using polyurethane Injection and finished with Servowrap.

INTERNATIONAL MARINE COATINGS - INSPECTOR / SITE REPRESENTATIVE
During this period, I was responsible for traveling around the U.K. completing small contracts for ship repair yards. This involved inspection of various coating systems to pipes decks and tanks. I left this position due to new management take over.

DEBRA COATING LIMITED (NINIAN FIELD: NORTH SEA) –
COATINGS SUPERVISOR
Application of new non-skid walkway system to all walkways, internal and external to the Ninian Central Production Platform. Work included Supervision of labour / Q.C. / ordering of materials / client to contractor meetings on progress through to hand over.

BABCOCK GERMANY (LOCATION: BRUNIBUTTLE) –
INSPECTOR / SUPERVISOR
Working under sub-contract to Babcocks in the Bayer Chemical Plant extension project. This consisted of supervision of labour force at all levels / client, contractor inspections, reporting, ordering of materials and scaffolding for various site locations on the plant for various structures.

SALAMIS (ON SHORE AND OFF SHORE) - BLASTER / SPRAYER
During my time with Salamis, I worked on various contract, including semi-subs moored at Peterhead, usually leg and pontoon areas being blasted to varying standards, depending on Client Specification: Re-coat with anti-fowling or various low permeability systems. Mud Rooms, full blast and coat with coal tar Epoxy. T.L.P. Project working in blasting was to S.A.2.5. Clean off and after Client Inspection, one coat of Inorganic-zinc Silicate.

I.M.C HARLAND AND WOLF IRELAND (DRY DOCK) - SPRAYER / APPLICATOR
Ship types include - Tankers: Bulk Carriers and Cargo Vessels. Application of coating products to all areas: internal and external tanks holds: Engine Rooms: saddles and tanks: double bottoms: decorative work to accommodation of all type of coating including, Alkyd Coal-tar flame retardant two pack paints: anti-fowling S.P.C.

MIDDLE DOCKS ENGINEERING - APPRENTICE PAINTER
Duties included - all types of painting, spraying and water blasting. I was also trained to strip down and replace worn parts of the high-pressure graco airless spray units and guns. I was made redundant due to the closure of the Yard.

Salary, Negotiable
Plus expenses
Transportation
Accommodation
Vacation plus travel Expenses
Per Dim
All Negotiable

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6401 to 6450 of 15497)

Go to Search Parameters...

Brief Description

I am I have worked extensively on both land and offshore rigs. I always try to perform my job to the best of my ability, with safety to personnel as my #1 goal.

Water industry: French citizen w/U.S. Green card; 27+ years experience in construction & operations and maintenance; electromechanical and site management skills; specialist in process component for W/WW systems

I had more than 20 years experience in Gas Processing plant, previous company I worked for LNG Plant and last position as Utilities Senior Operator and Present company I have been working for Gas Processing as field operator.

Resume CV: To join an offshore drilling company as Rad. operator, Logistics Coordinator any place in the world

I would prefer to work as Commissioning Supervisor in the Middle East.

Objective Production engineer, oilfield engineer, or mechanical engineer in a contracting firm.

Dear Sirs, I am 33 yrs. old, from Romania, Electrical Engineer. I would like to get a job in electrical/administrative petroleum/oil/gas field. Even I've have a Diploma in Electrical field I can accept to work as electrician, technician, foreman, or engineer.

20 years experience in non-destructive testing and inspection as a technician, radiation safety officer, division manager, and project manager.

NACE Certified Coating Inspector #7278, with +20 years of experience, available as (3rd party) Q.A./Q.C. coating inspector, coating surveyor, coating supervisor, vendor surveillance, etc.

I have been working in the Construction Industry for 40 years at all levels up to Construction Manager. I have extensive experience overseas including Africa and Asia. I am looking for similar work and am prepared to work anywhere at immediate notice.

Maintenance of: - Simovert - frequency regulation for the speed control of High Power asynchronous motors 450 KW and 110 KW - Frequency regulation for the speed control of Low Power asynchronous motors - High Voltage switchgear equipments - MCC - Switchgear equipments - Low Voltage -ETC...

I 'm Canadian citizen, I have second class marine engineer.

25 years of experience all over the world in the instrumentation field including 12 years offshore oil platforms, erecting, construction, precommissioning , commissioning and start-up a wide range of pneumatic, hydraulic and electronic instruments, DCS – ESD – F&G systems.

Process Engineer

I accumulated 22 years of experience in the oil industry, most of the time with the Schlumberger service company in the area of Oilfield Services management, Reservoir Evaluation Wire line and Testing.

I have 21 years in Aust Army as Maint Planner/Supervisor with Diploma Engineering (Maint). Experienced trainer in Mincom Logistics computer systems. Willing to relocate nationally or internationally for the right position.

Over twelve years experience in Offshore and Onshore Oil & Gas and Marine Structure Development in National & International government projects. Project engineering management, Engineering, Design, Construction and Project cost estimation.

WORK EXPERIENCE I have 14 years of experience in plant F.C.C ( Fluid Catalic Craking ).Refinery El Palito in Venezuela ( PDVSA ) and experience in Pre commissioning

Over 25 years of exploration drilling and mining experience. Responsible for the coordination of drilling projects in both domestic and international environments.

I was employed by ARCO Indonesia Oil & Gas since April 1980 thru March 1999. My last position was Elect/Instr Supervisor of NGL gas plant refinery located at NorthWest Java sea, for offshore facilities. My current employer is BP-Indonesia, position job as Maintenance Planner.

26 years Mechnical Design Engineering 16 years CAD experience including intensive 3D modeling 14 years product design experience. 12 years manufacturing tooling and facilities experience.

23 years experience in the Electrical Distribution/Electrical Contractor Industry. Wish to acquire a part time or full time position in an office or job site environment.

Job objective: General Supervisor, Field Supervisor, Project Manager or Assistant Project Manager. Interested in overseas opportunities.

Objective: Seeking a career position with a progressive organization where my skills , training and extensive knowledge and experience can be fully utilize, while offering the opportunity for continued career growth.

Highly experienced purchasing and material management professional. Specialized experience in remote, severe climatic locations. Extensive experience in cross cultural work situations.

Curriculum Vitae „h Over 25 years of oilfield experience in Canada „h Mechanic on a seismic crew until tools were stolen „h Roughneck to driller, 11 years as a driller on a drilling rig „h Owner/operator of a vacuum truck business „h Mechanically inclined

BS EE from USA. I have over 14 years of experience in maintenance and projects while working with reputable organization like Exxon, Mobil, Occidental and BP Pakistan in fertilizer, petrochemical and oil/gas E&P industries.

OVER THIRTY YEARS EXPERIENCE AS A FULLY CODED WELDER ALONG WITH FOREMAN, SUPERVISER AND WELDING ENGINEER/CHIEF WELDING ENGINEER POSITONS ALSO UNDERTAKEN ALONG WITH NORMAL WELDER POSITION.

Seeking employment where my years of experience in surface & underground mining & construction, as well as my strong sales, contracting, consulting, and management skills can best be used

Chemical engineer w/ experience in developing various contracts in oil, gas, water, waste treatment & soil road maintenance. Expert w/ performance based contract. Possesses good organizational, team & interpersonal skills. Adept at working & communicating across disciplines & management levels.

Looking for a new challenge at the end of 2003 my present contract end then

Operate, commission and monitor equipment in assigned areas, maintaining parameters with the guide lines of the operating manuals and procedures of 80,000BPD three phase separation multi train crude separation units, 110 MMSCFDgas compression& treatment plants

Strategic Planning Business Development Project and Business Valuation

I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects.

Nobody has climbed up through the steps of success with his hands in his pockets.

Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering

I completed my degree in Electrical Engineering and had taken and passed the highest National Examination in The Philippines, Professional Electrical Engineers Examinations in 1986. I have a good experience in Oil and Gas, Controls, Fire and Gas Systems, Design, Detailed Autocad Drafting(Isometric),

Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.

Associate Degree in Mechanical Engineering Draughting, 10 years Experience in various Mechanical and Plant Layout applications, using Inventor, Autocad, Pro Engineer, MSC Patran. Heavy Engineering Environment, International Earth Moving Machinery Manufacturing Company in South Africa.

BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Experienced exploration / production geophysicist and geologist with major Exploration Companies

22 years oil field Experians. Higher secondary.

Over 23 yrs of heavy earth field mechanic. AAS in Heavy equipment and diesel Technology. Lack final semester for BA in Training Industry & Business. CAT and Kamatsu trained.

AutoCAD, PDS (3-D modeling). Lead engineer of erection department

I hold a degree in Polymer Eng. from the Federal University of Technology Owerri, Nigeria. I am proficient in Autocad 2D/3D modelling, HYSYS, Bentley Auto Plant/P&ID, Boiler Maker, Autodesk Inventor

HIGHLY COMPETENT IN BUILDING AND ROAD CONSTRUCTION WORK(B.ENGINEERING,CIVIL)

Instrumentation technician with nine years experience in maintenence,repair,calibrating and installing of electrical,electronic and pnuematic equipment.

Mechanical Engineer with manufacturing experience

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 [ 129 ] 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out