Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #3822 next resume »»
CONTACT INFORMATION:
View contact information...

Academic Profile:

* Master of Technology (M.Tech) in Environmental Science & Engineering from Indian
Institute of Technology (IIT) Bombay, India
* P.G. Diploma in Environmental Management from Central University, Hyderabad, India
* Bachelor of Engineering (B.E) in Civil Engineering from Andhra University, Visakhapatnam,
India

Memberships:

* Member of Indian water Works Association, India
* Member of Environmental Science & Engineers Association, India
* Member of Indian Environmental Association, India

Technical Paper:

* Monitoring and modeling of indoor-outdoor air pollutants in an urban region in India by V. Ananda Kumar and Rashmi S. Patil, in the "Indoor Air 2002", 9th International
Conference on Indoor Air Quality and Climate, held during June30-July5, 2002 at
Monterey, California

* Indoor-Outdoor Relation of Aerosols for Mumbai City by Rashmi S. Patil & V. Ananda Kumar at 2nd Asian Aerosol Conference, July 1-4, 2001, Pusan, Korea.

* Evaluation of methods for analysis of Benzene in the work place environment" by V.Ananda
Kumar & M. Phani

* Working on technical paper titled "Measurement of Oxides of Nitrogen (NOx), Nitrogen
Monoxide (NO) and Nitrogen Dioxide (NO2) from coal based thermal power plants in India"

Trainings:

* Attended the training program on the "Instrumental Analysis of Environmental Samples" conducted by Bhagavathi Ana Labs Ltd., Hyderabad. India, during March 4-8, 1997

* Attended the training program on the "Safety Practices in Petrochemical Industry" conducted by Indian Petrochemical Corporation Ltd., at Vadodara, India, 5 July 1999

Work Experiences:

* Till date-Aug 2003 - Environmental Engineer,
SEW Ltd., Al-Khobar, Saudi Arabia

* Jul 2003-Feb 2001 - Sr.Engineer(Projects)
Environment Division, Ana Labs, Baroda, India

* Jul 1999-Aug1997 - Sr.Engineer (Environment)
BAL Ltd., Hyderabad, India

* Jul 1997-Aug 1994 - Environment Engineer
BAL Ltd, Hyderabad, India

Capabilities & Areas of Exposure:

* Air quality monitoring, source emission monitoring and compliance studies for petrochemical, refinery, cement, chemical and pharmaceutical companies
* Specialized in air and emission monitoring as per US EPA, ISO, IS and CPCB
methods
* Compliance studies and documentation for AIR and WATER Permits
* Designing, engineering, estimation and costing of pollution control facilities
* Indoor-Outdoor Air Quality Monitoring (IAQM) model development and validation
* Designing of air / water quality network for environmental studies
* Personal, work environment monitoring as per OSHA and NIOH guidelines
* Water and wastewater quality testing as per APHA methodologies
* Performance evaluation and trouble shooting of treatment systems
* Operation and maintenance of wastewater treatment plants and waste treatment
* Environmental management systems auditing for Fertilizer, Chemical,
Pharmaceutical, Cement Dairy and Light manufacturing units.
* Documentation related to EMS and ISO 14000
* Participated in model development and validation studies
* Coordinated with air modeling specialists to prepare modeling reports.
* Preparation of EIA, EMP reports.

Major Project Association:

* Flue Gas Emission Study for a refinery Khafji Joint Operations, at Al-Khafji, Saudi
Arabia as per the environmental protection agency (EPA) methodology

* Baseline environmental monitoring studies for environmental impact assessment of a refinery of Madras Refineries Ltd., Manali, India

* Industrial pollution prevention project-II, base line air and water quality data generation for 2 districts in Andhra Pradesh, India. Sponsored by Andhra Pradesh
Pollution Control Board, funded by World Bank

* Development of standards for oxides of nitrogen (NOx) for coal based thermal power plants in India, sponsored by Central Pollution Control Board (CPCB), New Delhi, India

* Regional environmental management plan (REMP) based on the carrying capacity studies at
Paradeep, Orissa, a project sponsored by Orissa State Pradesh Pollution Control Board,
Bhubaneshwar, India

* Performance evaluation of the De-Noxing System for Caprolactam Plant at Gujarat State
Fertilizers and Chemicals Ltd., Vadodara, India

* Performance guarantee studies for the wastewater treatment facilities at Oil and Natural
Gas Corporation Ltd., Gandhar, India

* Environmental management systems (EMS) auditing for Bayer Diagnostics India Ltd., GE
Lightings India Ltd., Gujarat State Fertilizers and Chemicals Ltd., in India

-------------------------------------------------------------------------------

DETAILED PROJECT EXPERIENCE

--------------------------------------------------------------------------------

Led the team for the following projects at various parts of India and abroad.

OVERSEAS ASSIGNMENTS

Carried out continuous monitoring Flue Gas Emission Studies for a refinery Khafji Joint Operations, at Al-Khafji, Saudi Arabia. A project of SEW Ltd., Al-Khobar. US EPA methods have been employed to carry out the Continuous monitoring.

The project involved monitoring the flue gas emissions from chimneys under various load conditions viz. full load, normal load and at different conditions of firing viz. Low firing and high firing. EPA promulgated methods were employed to measure the flue gas temperature, velocity and pollutants for various scenarios identified. Chimneys connected to various sources were identified viz. boilers, D.G sets, and process stacks under various fuels like- Furnace oil, Fuels Gas and Bunkers Oil. Continuous monitoring was carried out for a period of 3 hours using the flue gas analyzers for the Pollutants- Particulate Matter, Sulfur Dioxide, Oxides of Nitrogen and Carbon Monoxide. Flue gas composition was also estimated. The parameters viz. Nitrogen, Oxygen, Carbon Dioxide, carbon monoxide, Excess Air were estimated.

ASSIGNMENTS IN INDIA

"Industrial Pollution Prevention Project-II, Base line data generation studies for the various districts in Andhra Pradesh". A project sponsored by Andhra Pradesh Pollution Control Board, funded by World Bank.

Reconnaissance studies were conducted for the entire study area. Protocols were developed for various identified components. Site selection was carried out for various components like- air, Noise, water and soil. Longitude and latitude of the sites were identified using GPS handsets. A network was planned environmental monitoring. Based on its importance selection and prioritizing of the pollutants is carried out. Environmental monitoring was carried out as per the developed protocols. Statistical Analysis was carried out for the data generated through the field studies and reports were prepared.

Development of Oxides of Nitrogen for Coal Based Thermal Power Plants in India, Sponsored by Central Pollution Control Board (CPCB), New Delhi

The project started with the listing of various coal based power plants in India. Power stations were selected based on the age and the technology in coordination with CPCB. Literature survey was carried out on the best available control technologies (BACT) and the practices. Protocols were developed for the measurement of Oxides of Nitrogen (NOx), NO and NO2. Measurement of NOx was carried out confirming to EPA methods both conventional and the auto flue gas analyzers. Additional parameters like excess air, flue gas temperature were also measured. Information related to project viz. temp in the combustion zone, pollutant residence time, plant load, grade of coal used and control technologies were also collected. Measurements were carried out at various Thermal Power Stations of range 60- 500 MW. Report comprising of present scenario of power plants with respect to NOx across the country was prepared and submitted.

Regional Environmental Management Plan based on carrying capacity studies for Paradeep, Orissa a project sponsored by Orissa State Pollution Control Board (OSPCB), Bhubaneshwar.

The project was initiated reconnaissance studies. Protocols for various identified components were developed. Monitoring sites were selected for various components like- air, Noise, water and soil. Longitude and latitude of the sites were identified for all the stations using GPS handsets. Monitoring network was planned for environmental monitoring. Pollutants were identified based on their importance. Environmental monitoring was carried out as per the developed protocols. Statistical Analysis of the data generated through the field studies was carried out. Various highly polluting industries were identified in the study area. Environmental management systems were audited at all the industries identified in the study area. Emission inventory for study area was prepared for various sources viz. line, area & point. Environmental Management Plan (EMP) for the entire region was formulated and report was submitted.

Environmental Monitoring/ Baseline Environmental Data Generation

* Baseline environmental data generation for air, water, noise and solid waste quality for refinery expansion project of Madras Refineries Ltd., at Manali.

* Annual Maintenance Contract for the Environmental Monitoring works at Indian
Petrochemicals Corporation Ltd.,Vadodara

* Annual Maintenance Contract for the Environmental Monitoring works at Gujarat Fertilizers
& Chemicals Ltd., at Vadodara

* Seasonal Environmental Monitoring works at Singareni Collieries Co. Ltd., Kothagudem,
* Annual Maintenance Contract for the Environmental Monitoring works at KCP Cements Ltd.,
Macherla

* Baseline environmental data generation for the air, noise water and soil at Pipe line
Project of Indian Oil Corporation Ltd., Kandla to Bhatinda.

Environmental Management Systems (EMS) Auditing

The project involved reviewing the EMS of the industry which included verification of the air, water and hazardous waste permits. Treatment facilities were inspected and performance was evaluated for air, wastewater and hazardous waste facilities. Alternative, cost effective treatment options were suggested for better compliance. A complete environmental compliance report with suggestions for improvement of EMS was submitted at:

* ITC Ltd., ILTD Division, at Chirala,
* Amul Dairy, Anand,
* Bayer Diagnostics (I) Ltd., Vadodara,
* GE Lightings, Nadiad,
* Gujarat State Fertilizers and Chemicals Ltd., at Sikka
* Rubamin Pharmaceuticals Ltd., Dabhasa
* Ficom Organics Ltd., Ankleshwar
* KCP Cements Ltd., Macherla
* IBP Explosives Ltd., Ramagundam.

Performance Guarantee (PG) Studies for Air Pollution Control Equipment

P.G. studies involved the measurement of the pollutant concentration levels at both inlet and outlet of the pollution control facilities. Studies involved the protocol development for the stack gas testing for particulate matter as per the EPA methods. Measurements were made for PM both at inlet and outlet of cyclones, multicyclones, dust bags and electrostatic precipitators. Iso-kinetic conditions were maintained for sampling. Other parameters like composition of the flue gas and moisture content were measured. Particle size distribution was also carried out. Necessary operating conditions were noted from the respective plants for the correlation of the generated data. A report comprising of the plant conditions and the performance of the pollution control equipment is prepared.

* KCP Cements Ltd., Macherla
* Penna Cements Ltd., Tadipatri
* ITC Limited, Chirala

Research & Development Projects and Case Studies

* Study on the performance guarantee studies of the NOx Scrubber of Gujarat State
Fertilizers and Chemicals Ltd., at Vadodara.

* Study on the analysis of the individual Hydrocarbons (C1-C7) from the flue gas emissions of a refinery and petrochemical complex for, Central Pollution Control Board (CPCB)
Western Regional office, Vadodara.

* Study on the validation and performance evaluation of the Water Quality Model for Larsen and Toubro Ltd., at Rajula.

* Study on the Evaluation of methods for the analysis of Benzene in the work place environment at Gujarat State Fertilizers and Chemicals Ltd., at Vadodara.

Environmental Impact and Risk Assessment Studies

* 5MTPA expansion project of cement plant of Zuari Cements Ltd., at Yerraguntla, AP
* 100 MW Naphtha based power plant of Snehalatha Generation Co Ltd., at Samalkot, AP
* EIA study for 60 kL/d expansion project for distillery of Gauri Distillery Ltd.,
Gauribidnur
* EIA study for upcoming project of bulk drug and pharma unit of Jupiter Orga Ltd., at A.P

Wastewater Engineering

Basic and Detailed Engineering Designing: of the units and structural design, selection of equipment, estimation and costing of items for

* Wastewater Treatment Plant of capacity 100 kL/d for Indo Matsushita Carbon Company Ltd.,
Nellore.
* Wastewater Treatment Plant of capacity 400 kL/d for Sugar Industry, Gaytri Sugars Ltd.,
A.P
* Wastewater Treatment Plant of Capacity 10 kL/d for Zinc Removal at Lakhanpal National Ltd.

Water Auditing:

Identification of sources of water and different streams of wastewater, estimation of the detailed water balance which included, designing of the open flow channels and V-notches and measurement of flow across them at:

* KCP Cements Ltd. Macherla, A.P
* Orient Cements Ltd., Devapur, A.P
* G.E. Lightings (I) Ltd., Nadiad, Gujarat.

Operation and Maintenance

Operation of the various units, day-to-day performance evaluation, optimum does fixation for the chemicals and of trouble shooting for:

* Common Effluent Treatment Plant of PET Limited at Hyderabad.
* ETP of Indo Matsushita Carbon Company Ltd.,

Performance studies for Effluent Treatment Plants

* Effluent Treatment Plant Oil and Natural Gas Corporation Ltd., at Gandhar, Gujarat.
* Common Effluent Treatment Plant of Patancheru EnviroTech Ltd., (PETL) at Hyderabad.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 8251 to 8300 of 15497)Go to Search Parameters...
Brief Description
A talented land Surveyor who is able to deliver services in Cartography, photogrammetry, cadastral, mining and Geomatics work.
I am applying as chemical engineer
Diploma in Land Surveying and have vast experience in engineering, cadastral, topographical and mine survey. I have experince using Leica instruments such as GPS System 1200 and TCR407, TC1610 total stations.Currently working as a contract surveyor at the Unki Mine Project (Anglo Platinum)
I have Bachelor Degree in Electrical/Electronic Engineering From University of Benin, Nigeria. I Graduated with a Second Class upper division(4.49). I also have National Diploma in the same field. I have two years Experience in Repair, maintanance and servicing of industrial machine.
Sales & Marketing - Valve specialist
B.S. - Mining Engineering. 20+ years experience as a mining engineer and staff supervisor in open cut copper mining utilizing earth-moving, drilling, blasting, drainage maintenance, and dewatering equipment. Also have several years experience with open-cut coal mining. Willing to relocate.
petroleum engineer, programming, Aries, fortran, acidizing
Over twenty-five years experience in Project/Construction Management in an Engineering Procurement and Construction Management environment, specializing in Project Controls, Planning and Scheduling. Project Controls background includes EP, EPC and EPCM.
Experienced in design and testing of oil & gas equip. including casedhole well completion equip., surface and subsea wellhead & production equip. designed to API 6A and other industry standards, artificial lift systems coupled with exposure to oil country tubular product
Diploma in Mechanical/materials management with 17 Years expereice in Material Controlling and Piping looking for employment with reputed organisations.
Dedicated Land Professional with 29 years experience in a "Cradle to Grave" land department who works well under pressure and a deadline
reservoir engineering petroleum engineering reservoir modeling simulation production profiles
Familiar in process control operation with Honeywell TDC-300DCS and Fox Pro. System.Can operate all plant auxillaries and utilities.Can do mechhanical trobleshooting/repair of all plant equipments.
Mastery in the use of Synthetic & various kinds of water based muds which I have worked with and used in various projects for the last Seven years. Mastery in the use of Fluids Reporting and Engineering systems.
QAQC Co-Ordinator
I am searching for offshore employment as a crane operator. My specialty is the Tower Crane. I have operated many types of cranes up to 250 ton.
Pressure Vessel Design Engineer
SAP MM professional with a total experience of over 11 years and SAP MM experience of over 2 years in implementation and support
Well Site Drilling/ field & HSE Engineer
Inventory Management, Cataloguing, SAP, Functional, Standardisation, BOM
Pre-commissioning/ commissioning, completions management on sveral Oil & Gas facilities globally
DATTARAM Scholarship for highest aggregate marks in Geology during three years graduation.
20+years wide variety of experience willing to work anywhere
Electro-mechanical overhead crane repairman
Skilled in Power Plant Operations and computer literate.
Estimating,Quantity Surveying, Project Planning & Project Management
crane &heavy equipment operator,mechanic,welder & service manager
Over 17 years experience in the Oil & Gas industry as Contract Administrator.
I have more than 11 years experience in Design, Selection and Engineering of Mechanical Equipment and Packages in Oil and Gas Industries (Onshore & Offshore).
MILLWRIGHT Detailed oriented Gold and Red Seal (V1984) experienced Journeyman Millwright Foreman with experience in construction and petrochemical plant environments.
I have 27 + years experience in Oil/Gas/Power Generation & as On Job Trainer
Technological Assessment and Management -environmental studies, transportation and energy production
My skills and qualification are very wide-ranging and diverse; this allows me a lot of latitude for skills transfer for both land based and marine orientated positions.
Environmental Engineer with more than 7 years professional experience in water projects. Right now, she is acquiring her Masters Degree in Environmental Engineering Science, UNSW, Australia.
I'm interesting for any Technician position , I have more than 14 year's experiences in all kind of electrical and electronic instruments Perform Preventive Maintenance and repair
A highly motivated and resourceful Engineer / Supervisor with experience in the Oil Industry with international companies in the construction and upstream sectors.
I have a BS in Chemical Engineering from Colorado State University. I am a recent graduate from the Environmental Science and Engineering department at Colorado School of Mines, where I completed graduate Master’s research and thesis work specializing in groundwater remediation.
A Petroleum Engineer with an MBA degree & about 8 years of experience with major E & P operators. Reservoir engg, reservoir modeling, prod surveillance, well completion & economic evaluation. A team player with excellent communication skills with strong focus on HSE.
Within my 8 years career, I have acquired Project Management and Contract Administration experience in the Oil Industry. I have developed my abilities at articulating and realizing project and contract management strategies from predefined or self-conceived objectives.
OIL AND GAS OFFSHORE OPERATION and PRODUCTION SUPERIVISOR/SUPERINTENDENT
Mechanical Engineer with 17 years Exp in Oil&gas/Refinary & power Sector as Sr .Manager with Triune Projects Pvt Ltd, New Delhi Key Skills: Project Management, Construction Supervision & Management, Testing & commission, Maintenance Management
I am goal-oriented, able to focus on the task with proven reliability to get the job done. As a graduate from Merdeka University of Malang, majoring in Mechanical Engineering, I pursue my career in Mechanical Engineering field or general Management.
11 years Administration/user level experience in the field of 3D Plant design Systems (PDMS/PDS) catering to the industry of petrochemicals, Refineries with strong piping background. Presently working with Fluor Daniel India Pvt Ltd, Delhi as PDS Coordinator.
Due to plant closing I am seeking new employment. I can disassemble and reassemble various types of mining equipment. Including gear cases, hydraulic components, and re-hose equipment.
Good experience in the operation of mining and quarry activities
i have over 17 years experience with diesel and hydraulics mechanical and automotive installation and trouble shooting i am looking for a position where my experience would reduce downtime and improve production
Excellent practical and theoretical environmental skills for a recent graduate. Demonstrated ability to collect and analyse a variety of ecological and environmental data. Computer software exp in statistics and GIS packages. Solid work history of prior employment displaying a commitment to work.
8 years of drilling engineering experience. Drilling and workover engineer, junior drilling supervisor, well site drilling engineer, bits optimisation engineer, HSEQ support Eng. Bits, stuck pipe & well control contracts manager and cost management project engineer.
A Graduate in Master of Technology (M.Tech) in Environmental Engineering and Management. having 8 years of experience in the areas of Environmental, Health and Safety Projects Management.
extensive experience in the field of pre-cast concrete products
First   Prev   151   152   153   154   155   156   157   158   159   160   161   162   163   164   165   [ 166 ]   167   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   189   190   191   192   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com