Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #3849 next resume »»
CONTACT INFORMATION:
View contact information...

"Seeking employment where my years of experience in surface & underground mining & construction, as well as my strong sales, contracting, consulting, and management skills can best be used. Whether involved in a supplier relationship, as a contractor, etc., I have proven to be equally competent in planning, bidding, and managing projects and employees, and in achieving high levels of productivity and quality."

May 2001 to Present:
Superintendent, Bennett Consulting Group DBA Pacific Crest Construction
Responsibilities include project planning, bid preparation, job acquisition, and management of General Engineering Construction projects in Northern and Central California for Brother Edward Bennett's Company. Examples of projects in the last few years include;

Rock Net Fence Installation, Caltrans, Big Sur, Ca.
Install new water system for Ca. State Park, Wrights Beach Campground, Bodega Bay, Ca.
Restroom Construction, Ca. Dept. of Boating & Waterways, Folsom Lake, CA.
Sewer Line Replacement, National Park Service, Hyde Steert Pier, San Francisco, CA.
**Currently completing a new wastewater treatment system for Angel Island State Park, Angel Island, in San Francisco Bay, & Rock Drapery System Construction, Caltrans, San Louis Obispo, CA

November 1998 to May 2001: Carclub.com/JD Power Clubs, Inc.
Sales Account Representative, Outbound Sales
Primary responsibilities were initial contact and sales to managers and owners of retail auto dealerships. Sales efforts for both seasonal and ongoing events, located throughout the country. Examples of programs include credit union sales events, AAA member's new and used car buyer referral programs, and promotions associate membership groups. Met or exceeded most goals in terms of sales levels and received individual bonus each and every month during employment. Additionally, provided collection efforts, and signed up new credit unions to participate in annual or bi-annual promotional events. All contact, sales efforts, and securing of contracts was made via telephone, fax, and email. Responsible for dealer sales efforts year round in Ohio, Colorado, California, New York, Illinois, & Massachusetts, and other states for seasonal promotional events. Assisted fellow workers to utilize available technology and to increase efficiency, and set new levels of achievement for the department to strive for. Recognized by fellow workers as a leader in the department who was always available to assist them and to provide new and innovative ways to meet customer needs, and increase market share. Also Operated Bennett Northwest Enterprises, Inc. simultaneously.

7/97 to 7/98: Randy's Blasting, Inc. (now Western Blasting Services) Marysville, Ca.
Technical Sales and drill & blast services, as well as account responsibilities for this General Engineering Contractor specializing in Drilling & Blasting.

1/95 to 6/97: Sales Consultant Saturn of Oakland, Saturn of Fremont, Saturn of Stephens Creek, Ron Goode Toyota, Alameda, Ca. Thrifty Car Sales, Hayward, Ca. & Empire Ford Lincoln Mercury, Grass Valley, Ca.
Worked as independent consultant while operating Bennett Northwest Enterprises, Inc. Sales of new and used automobiles at various auto dealerships in Northern California. Received numerous awards as 'Salesman of the Month' for top sales levels. Excelled at the 'Saturn Philosophy' of no hassle consultative sales technique, and maintained high customer satisfaction levels. These positions allowed for flexibility in schedule to operate owned business.

6/92: Founded Bennett Northwest Enterprises, Inc.
President & CEO
Provided consulting services as well as drill and blast contract services and seismic monitoring services to mining and construction industries. Some projects completed to date are;

Explosives Engineering, & Blasting Services for Weyerhaeuser Corp. on demolishion of old Du Pont Dynamite Manufacturing Plant, Du Pont, Wa. (video available)

Training and consulting services, as well as quality Control & Assurance for The Us Army 1st Special Forces Division, Fort Lewis, Wa. on the use & handling of commercial explosives. (video available)

North Bend Logging, North Bend, Wa. Drill & Blast Contracting for Logging Road Development

Burlington Northern Railroad, & Arnold Drilling, Greenacres, Wa. Drill & Blast of Railroad Bridge to demolish decks while retaining existing Footings & Piers, Hardin, Mt. (Video available)

Assisted with training for California Dept. of Transportation employee's annual Explosives training course, 30+ attendees (all CALTRANS employees licensed for rock blasting, & avalanche control)

Consulting Services for Western Marine Construction, Seattle, Wa., prepare plans & submittals for US Army Corps of engineers, for underwater blasting to deepen harbor for a fish processing facility, Sitka, Ak.

Consulting Services, Gallagher & Burk, Oakland, Ca. for Leona quarry, 1992-1994

Drill & Blast Contract services and seismic monitoring, Gallagher & Burk's Leona Quarry, Oakland, Ca.(contract for 1994-1995 production) video available

1987 to 12/94: Atlas Powder Company (Oriard Powder Co, Western States Energy, Atlas Northwest, ICI Explosives USA.)
Sales Representative, Technical Sales Representative, & Area Manager Sales of explosives and blasting supplies and services to the mining and construction industries. Advanced rapidly and received much training on the commercial use, handling, storage, and transportation of explosives. Responsibility for sales presentations, forecasting, and budgeting. Recipient of the 'Atlas Achiever's Award' and sent on an all expense paid trip to Jamaica in 1987. Worked with most major construction and mining companies on projects in California, Oregon, Washington, Nevada, Idaho, and Montana. Provided technical training and expertise on blasting operations as well as city, state, and local municipalities. Managed manufacturing and distribution facilities in Washington, Idaho, Montana, and California. In this highly competitive and declining market, price is not always the most important factor, and customer service, technical knowledge and assistance, and tailoring products and services to meet each and every customer's individual needs for their operation was key to maintaining existing accounts, and obtaining new business. Assisted in the development of many new products, delivery systems, & services not utilized in the marketplace before. Provided any level of service from simply delivering products to providing full drilling and blasting services for large and small clients alike, throughout the western USA. Provided training to Spokane, Wa. Bomb Squad on Use, Handling, Transportation, & Characteristics of Commercial Explosives. Heavy experience in underground mining, tunnelling, and bulk applications.

1986 & 1987: Alpha Explosives, Lincoln, Ca. (Ireco Distributor) Sales Representative
In this position entered the explosives business, as a sales rep for this long time well established independently owned distributorship. Responsible for technical help, blasting services, training, & sales to customers throughout Northern and Central California. Provided sales & technical support as well as blasting services. Some customers included Kiewitt Pacific, Kaiser Sand & Gravel, Homes take Mining Company, Dillingham Construction, & NA Degerstrom Co.

1982 to 1985: Sunshine Mining Company, & Singing Creek Mines. Underground Miner/Licensed Blaster, Feather Fork Mine, La Porte, CA & Mineral Slide Mine, Magalia, CA
First introduced to explosives & blasting through these positions as underground miner. Selected from all employees at mineral Slide Mine to attend training at company's expense for California State Licensed Blaster for the mine. Performed all functions associated with mining gold in underground placer deposits, including driving tunnels into the ore body, ground support, drilling and blasting, & excavation of waste material and gold bearing ore. Recognized as an exceptionally hard worker with much ambition.

California State Licensed Contractor
California fire Academy at Asilomar, CA
Arson and Explosives Investigation
Fire Prevention 1A
Fire Prevention 1B
Peralta College-various general education many sales training courses
Numerous "quality" and Partnering" training courses many Explosives and Blasting Courses attended and taught certified MSHA instructor
Red Cross First Aid Instructor
Red Cross CPR Instructor
Mine Rescue Training
Member, International Society of Explosives Engineers
Founding member & served as treasurer, Golden West Chapter certificates available upon request references available upon request

View contact information...
«« previous resume next resume »»
Search Results (Resumes 6401 to 6450 of 15508)Go to Search Parameters...
Brief Description
Dear Sir/Madam, I am an experienced offshore Rig Electrician. Please find enclosed, my resume for your consideration.
I am I have worked extensively on both land and offshore rigs. I always try to perform my job to the best of my ability, with safety to personnel as my #1 goal.
Water industry: French citizen w/U.S. Green card; 27+ years experience in construction & operations and maintenance; electromechanical and site management skills; specialist in process component for W/WW systems
I had more than 20 years experience in Gas Processing plant, previous company I worked for LNG Plant and last position as Utilities Senior Operator and Present company I have been working for Gas Processing as field operator.
Resume CV: To join an offshore drilling company as Rad. operator, Logistics Coordinator any place in the world
I would prefer to work as Commissioning Supervisor in the Middle East.
Objective Production engineer, oilfield engineer, or mechanical engineer in a contracting firm.
Dear Sirs, I am 33 yrs. old, from Romania, Electrical Engineer. I would like to get a job in electrical/administrative petroleum/oil/gas field. Even I've have a Diploma in Electrical field I can accept to work as electrician, technician, foreman, or engineer.
20 years experience in non-destructive testing and inspection as a technician, radiation safety officer, division manager, and project manager.
NACE Certified Coating Inspector #7278, with +20 years of experience, available as (3rd party) Q.A./Q.C. coating inspector, coating surveyor, coating supervisor, vendor surveillance, etc.
I have been working in the Construction Industry for 40 years at all levels up to Construction Manager. I have extensive experience overseas including Africa and Asia. I am looking for similar work and am prepared to work anywhere at immediate notice.
Maintenance of: - Simovert - frequency regulation for the speed control of High Power asynchronous motors 450 KW and 110 KW - Frequency regulation for the speed control of Low Power asynchronous motors - High Voltage switchgear equipments - MCC - Switchgear equipments - Low Voltage -ETC...
I 'm Canadian citizen, I have second class marine engineer.
25 years of experience all over the world in the instrumentation field including 12 years offshore oil platforms, erecting, construction, precommissioning , commissioning and start-up a wide range of pneumatic, hydraulic and electronic instruments, DCS – ESD – F&G systems.
Process Engineer
I accumulated 22 years of experience in the oil industry, most of the time with the Schlumberger service company in the area of Oilfield Services management, Reservoir Evaluation Wire line and Testing.
I have 21 years in Aust Army as Maint Planner/Supervisor with Diploma Engineering (Maint). Experienced trainer in Mincom Logistics computer systems. Willing to relocate nationally or internationally for the right position.
Over twelve years experience in Offshore and Onshore Oil & Gas and Marine Structure Development in National & International government projects. Project engineering management, Engineering, Design, Construction and Project cost estimation.
WORK EXPERIENCE I have 14 years of experience in plant F.C.C ( Fluid Catalic Craking ).Refinery El Palito in Venezuela ( PDVSA ) and experience in Pre commissioning
Over 25 years of exploration drilling and mining experience. Responsible for the coordination of drilling projects in both domestic and international environments.
I was employed by ARCO Indonesia Oil & Gas since April 1980 thru March 1999. My last position was Elect/Instr Supervisor of NGL gas plant refinery located at NorthWest Java sea, for offshore facilities. My current employer is BP-Indonesia, position job as Maintenance Planner.
26 years Mechnical Design Engineering 16 years CAD experience including intensive 3D modeling 14 years product design experience. 12 years manufacturing tooling and facilities experience.
23 years experience in the Electrical Distribution/Electrical Contractor Industry. Wish to acquire a part time or full time position in an office or job site environment.
Job objective: General Supervisor, Field Supervisor, Project Manager or Assistant Project Manager. Interested in overseas opportunities.
Objective: Seeking a career position with a progressive organization where my skills , training and extensive knowledge and experience can be fully utilize, while offering the opportunity for continued career growth.
Highly experienced purchasing and material management professional. Specialized experience in remote, severe climatic locations. Extensive experience in cross cultural work situations.
Curriculum Vitae „h Over 25 years of oilfield experience in Canada „h Mechanic on a seismic crew until tools were stolen „h Roughneck to driller, 11 years as a driller on a drilling rig „h Owner/operator of a vacuum truck business „h Mechanically inclined
BS EE from USA. I have over 14 years of experience in maintenance and projects while working with reputable organization like Exxon, Mobil, Occidental and BP Pakistan in fertilizer, petrochemical and oil/gas E&P industries.
OVER THIRTY YEARS EXPERIENCE AS A FULLY CODED WELDER ALONG WITH FOREMAN, SUPERVISER AND WELDING ENGINEER/CHIEF WELDING ENGINEER POSITONS ALSO UNDERTAKEN ALONG WITH NORMAL WELDER POSITION.
Seeking employment where my years of experience in surface & underground mining & construction, as well as my strong sales, contracting, consulting, and management skills can best be used
Chemical engineer w/ experience in developing various contracts in oil, gas, water, waste treatment & soil road maintenance. Expert w/ performance based contract. Possesses good organizational, team & interpersonal skills. Adept at working & communicating across disciplines & management levels.
Looking for a new challenge at the end of 2003 my present contract end then
Operate, commission and monitor equipment in assigned areas, maintaining parameters with the guide lines of the operating manuals and procedures of 80,000BPD three phase separation multi train crude separation units, 110 MMSCFDgas compression& treatment plants
Strategic Planning Business Development Project and Business Valuation
I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects.
Nobody has climbed up through the steps of success with his hands in his pockets.
Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours
I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC
C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering
I completed my degree in Electrical Engineering and had taken and passed the highest National Examination in The Philippines, Professional Electrical Engineers Examinations in 1986. I have a good experience in Oil and Gas, Controls, Fire and Gas Systems, Design, Detailed Autocad Drafting(Isometric),
Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.
Associate Degree in Mechanical Engineering Draughting, 10 years Experience in various Mechanical and Plant Layout applications, using Inventor, Autocad, Pro Engineer, MSC Patran. Heavy Engineering Environment, International Earth Moving Machinery Manufacturing Company in South Africa.
BE Mechanical Engineer with 5 years experience in Piping Stress Analysis
Experienced exploration / production geophysicist and geologist with major Exploration Companies
22 years oil field Experians. Higher secondary.
Over 23 yrs of heavy earth field mechanic. AAS in Heavy equipment and diesel Technology. Lack final semester for BA in Training Industry & Business. CAT and Kamatsu trained.
AutoCAD, PDS (3-D modeling). Lead engineer of erection department
I hold a degree in Polymer Eng. from the Federal University of Technology Owerri, Nigeria. I am proficient in Autocad 2D/3D modelling, HYSYS, Bentley Auto Plant/P&ID, Boiler Maker, Autodesk Inventor
HIGHLY COMPETENT IN BUILDING AND ROAD CONSTRUCTION WORK(B.ENGINEERING,CIVIL)
Instrumentation technician with nine years experience in maintenence,repair,calibrating and installing of electrical,electronic and pnuematic equipment.
First   Prev   101   102   103   104   105   106   107   108   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   125   126   127   128   [ 129 ]   130   131   132   133   134   135   136   137   138   139   140   141   142   143   144   145   146   147   148   149   150   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com