Resume - About twenty (20) years of diverse working experience in various fields, out of ...

Misco Jobs

Resume #38649

CONTACT INFORMATION:
View contact information...

PROFILE
About twenty (20) years of diverse working experience in various fields, out of which Ten years in the Oil & Gas sector of Middle East. Currently working for Agip KCO as Inspections Coordinator – Procurement. Exposure includes projects for ADCO UAE (Jebel Dhanna, Asab, Sahil, Shah, Bab & Bu Hasa fields) ARAMCO KSA (Ras Tanura & Dhaharan) SCECO, KSA, in various positions as Construction Manager, Project Engineer, QA/QC coordinator, Senior Engineer (E & I), QC Inspector, Material Planner, Material Man, Supervisor, Electro-Mechanical Engineer, Works Manager, Manpower coordinator, Personnel Manager etc. Self employed in India managing a domestic Motors & Pump sets manufacturing unit & Industrial Training institute etc.

EDUCATION / CERTIFICATIONS / TRAININGS
Electrical Engineering, State Board of Technical Exams, Kerala q Diploma in Computer Application, Bytes Computer Institute, Kerala q Diploma in Quality Assurance & Quality Control, National Institute for Advanced Studies, Chennai, India q ISO 9000:2000 Lead Auditor Course (from BV- scheduled for May-2006)

* Supervisory Development Programme, Board of Apprenticeship Training, Madras
* Safety Training, PTW Job Performer (ADCO), Gulf Technical & Safety Training Centre, Abu Dhabi
* AUTOCAD, Bytes Computer Institute, Kerala
* Primavera, Design World, Kerala
* Defensive Driving Course (ADSD-ADCO), Emirates Driving School, Dubai & Matrix I.S.C, Dubai
* Senior Technician Member, Institution of Engineers, India
* Holds UAE Driving License

PROFESSIONAL EXPERIENCE

August 2005 – Present
Agip KCO - KBR
QC & Inspections Coordinator
Project: Kashagan Experimental project (Kasakistan), Oil, Gas & Sulpher packages.

Working as a Project Management / Client Team Member for this project at EP Contractor's office: ( Petrofac, Sharjah) work includes the following pertaining to procurement quality for about 150+ packages/orders:

* Review P.O's, allocating inspection man hours / budgets for various orders.
* Preparation of Request for Quotes and forward to TPI agencies world wide.
* Techno-commercial evaluation of quotes from various approved TPI agencies around the globe, evaluation of CVs of inspectors, appointing the qualified agency & Inspector for the packages and advising London Agip KCO office to issue RCAs.
* Issue of assignment instructions to selected agencies and forwarding the relevant documents and specs as per P.O
* Notifications for inspections, review of inspection reports, approval of time sheets. Follow up on close out of non-conformances, if any.
* Update inspection data base, electronic filing of all inspection reports to Agip EIMS documentum system.
* Review of Inspection reports and release notes from Petrofac appointed TPI and assure compliances and related follow-ups.
* Forward inspection reports to the concerned departments / discipline engineers for information & actions as required.
* Follow up of inspection reports & time sheets.
* Update inspection database with Reports / time sheets / invoices.
* Review & approve Time sheets, invoices & Cheque requests.
* Maintain & update NCR log book.
* Coordination with EP Contractor QC Engineers, review inspection reports from contractor's TPI's and Resident Inspectors.
* Attend weekly QC meetings with EP contractor Engineers to discuss and clarify issues pertaining to various orders.
* Review and approve Certificate of Deliveries (COD).
* Coordination with all TPI agencies assigned.
* Necessary co-ordination with UK, Sharjah, Kashagan offices.

February 2005 – July 2005 (Part time assignment)
PV INSPECTION SERVICES. Canada
TPI Inspector

* TPI inspector on behalf of Occeaneering, UK at E Production Solutions, Dubai for manufacturing of Well Head control Panels & HIPPS (Client: Khalda Peroleum, Consultant: JP Kenny).
* Expediting inspections, FAT, material inspections, review of documents and progress, preparation of inspection reports, witnessing of performance tests, signing of test reports and issue of release notes.

August 2004 – July 2005
AL HUSAM GENERAL CONTRACTING EST., Abu Dhabi, UAE
Project Enginee
As the only E&I Engineer in the newly set up Oil& Gas Division of this company, I was involved in the following:

* Cost Estimations, man hour calculations & bid finalizations for various tenders, including Technical & Commercial tender packages for Clients: ADCO, Technip /NPCC, Gasco, Takreer, Dolphin etc
* Evaluation of tender/project packages raise clarifications, queries and attend technical /clarification meetings with client/consultants/vendors/suppliers..
* Technical evaluations of material specifications, floating enquiries, coordination with various suppliers and vendors
* Conducting inspections and witnessing of tests at vendors/manufactures premises for all Electrical & Instrumentation requirements
* Attending technical meeting with Client, Consultant, Vendors, sub contractors and suppliers for on going projects and tenders. Attend weekly progress meeting with clients for on-going project.
* Preparation of E & I MTO, Purchase Orders, Letter of Intend etc. for ongoing projects.
* Material submittals & approvals from client.
* Prepare construction diagrams / drawings etc.
* Preparation of QC Procedures, QC formats, Construction Method statements, Mechanical completion / Pre-commissioning procedures
* Attend pre-commissioning & commissioning as required.
r (E&I), Oil & Gas Division

August 2001 to August 2004
PAN ARABIAN GENERAL CONTRACTING CO., Abu Dhabi, UAE

Project: EPC for Cathodic Protection of ADCO wall casing (Main Contractor: NPCC)
Sub Contract for Civil & Electrical works

September 2003 and onwards
Construction Manager / Resident Engineer
* Responsible for all construction related activities and progress
* Coordination with client construction manager and engineers
* Coordination with discipline engineers, supervisors, foremen and job performers
* Job allocation and man power allocation
* Daily activity scheduling and daily progress reporting
* MTO verification and material follow up
* Subcontractor coordination, conducting meetings, trainings for employees

May 2003 – August 2003
QA/QC Coordinator
* Responsible for all QA/QC related coordination's in both locations
* Preparation of QC Procedures and Inspection Test Plans for various activities of the project
* Preparation of various QC forms pertaining to the project
* Preparation of required Construction Method Statements
* Coordination's with client QC department
* Developing of various logs and records as required for the project
* Supervising QC Engineers & Inspectors
* Orientation and training of new QC Inspectors

August 2001 – May 2003
Senior Engineer (Electrical & Instrumentation)
Project: Construction of well heads and installation of Well Head Control Panels – Asab ADCO

* Responsible for all instrumentation related activities of the project
* MTO preparation
* Construction method statements
* QC Procedures, ITPs & QC formats
* Supervision of site activities, installation of Well head control Panels (CAC, Brisco etc)
* Inspection coordination's with client
* Pre-commissioning and punch listing
* Testing and commissioning

Project: Construction of Vapor Recovery & Minimized Flaring in ADCO fields – (SAS – ADCO)

* Responsible for all electrical and instrumentation related activities of the project
* Preparation of E & I MTO
* Technical evaluations of material specifications and submitting for client approval
* Attending technical meeting with client, consultant, vendors, sub contractors & suppliers
* Planning, supervision and Quality Control of E & I activities
* Attending weekly meetings
* Technical support, coordination, inspection and testing of DCS/ESD/PLC modification (Honeywell/Foxboro/Allen Bardely/Triconex etc.)
* Technical support, coordination, inspections and testing of LV/MV Switch Gear installation/modifications (Seimens/Alsom/Holec/ABB etc.)
* Installation supervision, testing & commissioning of vapour recovery compressor skid assembly (Garo/Gardner Denver) associated electrical and instrumentation equipments
* Supervision of Fibre optic cable installation, splicing, testing, installation of F.O. converters
* Supervision, testing and commissioning of Pressure / Temperature, Flow Transmitters/ switches, (Rosemount/Foxboro/FCI/Magnetrol) Control Valves, ESD valves etc (Tyco/Fisher/Flowserve/SPA) etc.
* Witnessing tests, inspections and coordination's with client.
* Preparation of various test and inspection reports as per QCP
* Pre-commissioning and punch listing
* Testing and commissioning
* Preparation of variation proposals

July 1999 to October 2000
CONTRACTING AND TRADING COMPANY, 'C.A.T.' Abu Dhabi, UAE
QC Inspector (Multi Discipline)

* Project: 48" Loading Rings, New Closed Drain system and Tank Cooling System at Jebel Dhanna Tank Farm (ADCO)
* Involved in almost all QA/QC activities of the QA/QC Department of this ISO9002 Certified Company.
* Material Receiving Inspection, Material Traceability, Piping (C.S., GRE & Cement Lined C.S.), Electrical & Instrumentation Inspections.
* Cable trench, cable laying, termination, meggaring and continuity test, Primary/ secondary injection tests etc. for electrical installation, package substations and test report preparations.
* Cable trench, cable laying, termination, meggaring and continuity tests, loop checks, Stroke/ functional testing of control/ ESD valves, verification of DCS displays / logics etc.
* Assisting in tank and welding inspections.
* NDT coordination's and Inspection coordination with client.
* Witnessing hydro-tests, welder qualifications, procedure qualifications.
* All QA/QC related documentation like pre weld/post weld inspection sheets, weld summaries, welder performance records, weld repair rates, NDT summaries, Periodical RT exam reports for welder control, weld repair tracking records, Releases for painting/ erection, material inspection reports etc as per QA/QC procedures.
* Updating of various logs and reports like Calibration Status logs, NCR/CAR status log, list of qualified welder/fitters.
* Preparing Punch lists and documentation needed for Hydro Test packs.
* Preparing marked up Isometric as per site variations and forwarding to discipline engineer.
* Assisting in internal quality audits.
* Preparation of various Dimensional Survey reports of Tank Erection.
* Generating various QC/QC formats, typing of audit reports, method statements, inspection test plans, Training reports, filing indexing etc.
* Preparation of Final Construction records dossiers.

August 1995 to July 1999
Self Employed

* Running a domestic Motors & Pumps Manufacturing Company
* Managing Partner
* Overall management of this company.
* Responsible for purchases, production Quality control, testing, labour management
* Accounts, marketing etc.
* Running an Industrial Training Center
* Principal
* Administration, supervision of staff conducting theory and practical classes
* Giving lectures on Technical subjects.

August 1990 to August 1995
HADI HAIDER & BRO'S CO., Rahima, KSA

March 1994 to August 1995 – Personnel Department, Personnel Manager
* In charge of Personnel Department of this International Construction and contracting company with 1500 employees.
* Responsible for processing of Visa's, Travel documentation, Processing and renewal of documents like Licenses, Passports, Iqamas, work permits, ID's, Exit/Re-entries etc.
* Coordinating salary fixation, salary increments, vacation schedules etc.
* Checking of monthly payrolls, vacation formalities and settlements.

August 1993 to March 1994 – Personnel Department, Man Power Coordinator
* Coordinating man power for ongoing projects
* Mobilizations, demobilizations as per schedules
* Responsible for transfer of employees between projects without effecting the work and working days.
* Preparing mobilization and demobilization schedules as per project requirements.
* Manpower coordination with clients for sub-contract works.

February 1993 to August 1993– Estimation Department, Estimator
* Quantity estimation, cost estimation and man hour calculations
* Preparation of bar charts and diagrams for various bid purposes

November 1991 to January 1993
Project: ARAMCO Long Form Contract, Dhaharan ARAMCO, Community Maintenance Division
Material Planner
* Quantity estimation and preparation of material take-off for renovation and projects unit.
* Responsible for procurement of materials to various maintenance projects.
* Familiar in SAMS, Stock numbers, SAUDI ARAMCO inventory system, documentations such as 1895, 984, LPR, LDOR etc.
* Preparation of schedules for Preventive Maintenance unit, Residential maintenance division
* Estimation and material procurement for PM, PM schedules, updating PM status, preparation of weekly PM reports

June 1991 to October 1991 – Procurement Department - Purchaser
* Purchase and procurement of electrical, mechanical, construction materials, tools etc. for different projects
* Coordinating material between ongoing projects and procurement department
* Documentations like purchase requisitions, purchase order, in & out vouchers etc.

January 1991 to May 1991
Project: Ain Dar Transmission Line and Sub Station Project (SCECO)
Material Man
* Scheduling procurements, issuing equipments, tools and materials
* Maintaining of records and documentations

August 1990 to January 1991
Project: Survey North Pier Trestle Pipe Lines and Pipe Supports, ARAMCO Ras Tanura
Mechanical Engineer
* Data collection and drawing search, site survey to prepare as-built drawings
* Preparation of piping isometric sketches
* Quantity survey, blasting and coating survey
* Preparation of material take-off, scope of work etc.

December 1988 to August 1990
MECON ENGINEERING, Bangalore, India
Works Manager

* In charge of all electrical and mechanical works
* Supervised fabrication, assembling and erection of cement plant machines like Kilns, Cyclones, Dust Collectors, Bends, Dustings and plastic processing extruders, mixers.
* Welding inspection, Quality control and inspection
* Supervised maintenance of all electrical equipment and machineries

April 1987 to December 1988
HI-YEILD AGROWS PVT, LTD., Bangalore, India
Maintenance Engineer

* In charge of maintenance of all electrical installations, machines and equipment
* Periodic checking, testing and inspections.
* Preparation of periodic inspection reports, preventive maintenance, checking electricians daily checklists, log books etc.

April 1986 to April 1987
MALABAR STEEL RE-ROOLLING MILL, Venniyur, Kerala, India
Technician Apprentice

* Preparation of as-built drawing single line diagram of electrical installation
* Daily checking and maintenance
* Updating daily check lists, log books, periodic I R checking of motors
* Maintenance works and maintaining proper records of maintenance and repair of sub station control panel, transformers, motors, pumps, generators, furnaces etc.

July 1984 to March 1986
MECON ENGINEERING, Bangalore, India
Shop Supervisor

* Supervised fabrication, machining, assembling and erection of machineries
* Welding inspection
* Preparation of cutting lay outs, machining drawings, documentation.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 15341)

Go to Search Parameters...

Brief Description

Project Manager/Controller/Scheduler

Deepwater drilling and completion superintendent and supervisor

Consulting Engineer / Civil, Structural, Architectural /

Over 24 years of various offshore vessels, ship yards, offshore rigs/ gas platforms, drill ships and engine factories as Oilier, Junior Engineer, Maintenance Superintendent, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Hydraulic Mechanic, Rig and gas Platform Chie

More than 30 years experience in civil structural design, consulting and supervision in upstream, downstream, and pipeline of oil and gas fields

Oil finder/working manager with 27 years experience in US/international exploration and production geology, geophysics and research.

Control System Engineer

CCC Certified, MBA, Cost Controller / Project Controller expert in Advanced Excel, MS Access

Accomplished professional with over 19 years of experience in all phases of the oil and gas drilling industry as a Roughneck, Motorhand, Derrick Hand, Assistant Driller, Driller and Relief Rig Manager. Demonstrated proven track record of recent operational success as Directional Driller, Trainer, Te

Utilizing my professional skills can be achieve good plant reliability and availability , improvement in plant efficiency by out of box thinking & brain storming , failure analysis by RCA method , adhering companies safety and HR rules and regulations , team building ,Hazop, P&ID review , commission

commsioning for L N G Process Plants

Very experience cementing engineer/specialist

Seek the excellent opportunity to improve the company profit by implementing best systematic procedures in maintenance and to lead a team of engineers to minimize the instrument operating, maintenance cost, maintain 0% breakdown, safe working and implement Automation wherever possible.

Project engineer with strong analytical & organizational skills. Major capital projects include large-scale LNG plants, offshore floating production, refining, chemical & Gas processing industry

Senior Applications Software Engineer with broad experience in design, development and implementation of highly technical applications. In-depth experience with multiple MMI intensive applications such as EMS SCADA, geological and geophysical workstations.

Welding Inspector

Geophysicist/QHSE Advisor

Driller with 9 years experienc on land rigs and 24 yrs. total exp. in drilling field

I have very good skills for work in team, a like part of the team and with the capacity of leadership to be leader of the team. I apply a proper self direction naturally, I work by means of a good communication between colleagues and the bosses, good organization, intensive diligence, strong initiat

Qualified and Experienced Business Development Manager & Coordinator.

Accomplished Business Analyst and Consultant with over 30 years of responsible experience in areas of accounting, finance, materials management, and procurement. Seeking a responsible and challenging position where I can continually add value and contribute to the growth of a progressive organizati

I am a graduate mechanical plus first class boiler engineer and have 20 years experience of process and pwer generation industries.Iam in search of some engineering job in managerial position keeping in view my qualification and experience.

Project Controls, Project Controls Manager, Scheduling

Maintenance Planner / Scheduler

Eighteen years of professional experience in the fields of logistics, port discharging operations, plant equipment maintenance, warehouse management and contract administration. Three years managerial experience in manufacturing operations.

Mud Engineer/Drilling Fluid Consultant 31 years of experience

Well versed in boiler construction, piping fabrication and installation, machinery installatio

PLC control systems, coordinated lines, Design, Start up, Maintain.

Experienced drilling, completions, workover, manager and engineer. Have experience in hard rock, mid-continent, gulf coast, offshore shallow/intermediate/deep waters. Have both domestic and intrenational experience.

Engineering Manager - nine years of experiance. Responsible for all engineering related fuctions; budgets, skills training, maintenance, forward planning, internal projects and during last three years actively involved as the ovners engineering team representative during project design, procurement

I am an exploration geologist - manager with about 30 years experience in a variety of commodities but concentrating on copper and gold. I have worked in Saudi Arabia, Australia, PNG, Philippines, Indonesia, China, Laos, and Mongolia.My experience in recent years has been in Exploration Management

QHSE and general vessel superintendent.

Passed Secondary Techical Examination, ITI Electronics, Diploma in Mechanical Engg, Advanced Training in Instrumentation and possess 22 years on hand experience in Instrumentation and Control System. Also possess UAE driving licence and have good knowledge in PLC, DCS, Turbine control system etc..

Eight years of experience in Mining Exploration, management of all aspects of exploration drilling campaigns, surface geology mapping, geophysics, geochemistry, and hydrogeology.

Over 20 years of Civil/Structural Engineering: Computer Aided Design & Analysis and Project Management

Extensive contruction management experience in the field of onshore cross country oil and gas pipeline projects.

Dynamic and accomplished Operations and Technical Development Leader with 20+ years of demonstrated achievements in devising effective operational improvements.

Over 20 years of overall experience in geology, geophysics and operations with an emphasis on Seismic interpretation and reservoir modeling. Areas of strength are mainly in operation geology, seismic interpretation, Prospect generation & maturation, opportunity evaluation, reservoir modeling.

24 + yrs oilfield experience, 5 yrs field supervisor managing 9 rigs daily with as many as 30 at one time.

B.S. Geology, Lead Oil Co. Owner, Lead MWD/LWD,Liaison Directional Driller and have experience in all disciplines of Directional Drilling.

Management of Training & Development (technical, vocational and competence assurance). BSc (Open University)

electrical engineer/high voltage/switchgear/substation/plc

Seeking a Senior Project Engineering assignment where I can utilise my wide range of experiences over 27 years in Oil & Gas and Petrochemical Facilities, Process Systems and Pipelines.

About twenty (20) years of diverse working experience in various fields, out of which Ten years in the Oil & Gas sector of Middle East. Worked for Projects for Agip KCO, ADCO, Dolphin, Aramco, Sceco Etc.

well testing marketing manager

Heavy Civil Manager

I am a post-graduate in Chemistry and Marketing, with Twenty-four years experience in Quality Assurance Laboratory (Refinery complex) of Bharat Petroleum Corporation Limited, with five promotions. Last sixteen years worked as Management Staff at various capacities in laboratory.

Engineering

Projects and R&D in Water and Waste water Treatment - Industrial and Residential, Environmental Pollution Control, Corporate Social Responsibility, Additionality, Sustainability and Accountability in Natural Resorces Management

Well conversant & experienced in handling of Offshore drilling project for Oil & gas exploration

First 1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out