Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #3879 next resume »»
CONTACT INFORMATION:
View contact information...

1. PROPOSED POSITION
FOR THIS PROJECT: HYDRO GEOLOGIST

3. DATE OF BIRTH: 9 January 1966

5. EDUCATION: Post Graduate Diploma in Ground Water Resources Survey, 1998, ITC, The Netherlands
: M.Sc. Geology, 1993; Tribhuvan University, Kathmandu, Nepal
: B.Sc. Geology, 1991; Tri-Chandra Multiple Campus, Tribhuvan University Kathmandu, Nepal

6. OTHER TRAINING: Environmental Impact Assessment (EIA) Training; 19th September to 23rd October 2001(35 days), School of Environmental Management and Sustainable Development (SchEMS), Pokhara University

: Refresher Course on "Institutionalization of Geoinformation for Urban Disaster Management" (IGUDM) is jointly organized by ICIMOD, ITC, NSET-N, and ADPC from 15 to 26 September 2003 Kathmandu, Nepal.

: Training on GIS (PC Arc Info, Arc view 3.2)

8. MEMBERSHIP OF
PROFESSIONAL SOCIETIES: Life Member, Nepal Geological Society (NGS)

9. COUNTRIES OF WORK
EXPERIENCE: Nepal, The Netherlands and Spain

10. EMPLOYMENT RECORD:

FROM AUGUST 1998: TO Date

EMPLOYER: Nepal Environmental and Scientific Services (Pvt.) Ltd. (NESS)
POSITION HELD AND
DESCRIPTION OF DUTIES: Geo-Hydrologist, Hydro-geological and Geological survey and mapping, Geophysical Investigation of groundwater investigation, Groundwater survey, Supervision and monitoring of well drilling site, Lithological sampling, electrical logging and design of the well, Pumping test and its data analysis for calculation of hydro-geological parameters of the aquifers, Preparation of proposal for new project, and Report preparation

FROM Dec. 1995: To August 1998

EMPLOYER: National Drilling Company of Nepal Ltd.(Nedrill) -Semi Government Organization
POSITION HELD AND
DESCRIPTION OF DUTIES: Geo-hydrologist, Conduct feasibility study of ground water, prepare design, estimate and supervision of the well, sampling of the soil horizons of borehole in well construction site, resistivity logging of the bore hole, pumping test and analysis of the well, and also assist in pump installation works; report writing of the completed project for the client, proposal writing for new drilling project, and supervision and monitoring of all activities in the project site as a site In-charge.

11. WORK UNDERTAKEN WHICH BEST ILLUSTRATES CAPABILITY TO
HANDLE THE TASKS ASSIGNED

* November,2002 (Ongoing): As a geo-hydrologist involving in Feasibility Study, Detailed Engineering Design and Construction Supervision of Water Supply and Sanitation Sector Projects: Kusma - Parbat and Beni - Myagdi under His Majesty's Government of Nepal Ministry of Physical Planning and Works, Department of Water Supply and Sewerage, Small Town Water Supply and Sanitation Sector Project

* December, 2002 - February, 2003: As a consultant hydro-geologist, involved in construction of one number of 10" x 10" size tube well of 16 m depth at Middle Marsyangdi Hydroelectric Project (MMHEP), Udipur, Lamjung under DYWIDAG - DRAGADOS - CWE -Joint Venture (Contractor), Germany, from Water Engineering and Training Center Pvt. Ltd. in association with Namo Buddha Drilling Company Pvt. Ltd. My works were: Tube well designing, Electrical logging of borehole, preparation of geological logs of drilled wells, analysis of geological samples obtained during drilling, well development, Pumping test and analysis of pumping test data and preparation of report on tube well.

* December, 2002 - Jan, 2003: involved as a consultant hydro-geologist in Ground water investigation at the premise of Balaju Industrial District (BID), Balaju, Kathmandu, Nepal from APTCOS P. Ltd. The works involved were to carry out resistivity survey for the potentiality of ground water, to investigate the actual depth required for drilling for ground water exploitation, to design and estimate of the proposed well.

* June,2002 - February, 2002: As a hydro-geologist involved in water sampling, monitoring, supervision and sanitary inspection of Community Based Rural Water Supply Systems (Groundwater) in Dhanusha districts (Janakpur Municipality-14 & Devpura Rupaitha VDC) under WDSC/LEI, Dhanusha Community Development Project, Community Drinking Water Supply and Sanitation Program

* Oct-2000- Nov-2001: As a hydrologist involved in Pre and post - monsoon water quality sampling and flow measurement of Kolpu Khola and its tributaries at different sections as a part of Environmental Impact Assessment (EIA), Solid waste Disposal Site development at Simdol-ko-gairo, Okharpauwa VDC, Nuwakot, SWMRMC, MoLD

* Sep-2000- May-2002: As a physical environmental expert involved in IEE Study of Rural Electrification Scheme for Package - I (Dhanusha, Morang, Jhapa, Bara) NEA, JV With East Consult, Nepal Electricity Authority, Nepal

* Oct-2000- Nov-2001: As a hydrologist involved in Pre and post - monsoon water quality sampling and flow measurement of Kolphu Khola and its tributaries at different sections as a part of Environmental Impact Assessment (EIA), Solid waste Disposal Site development at Simdol-ko-gairo, Okharpauwa VDC, Nuwakot, SWMRMC, MoLD

* June - October 2002: As a hydro-geologist involved in pre-monsoon and post-monsoon hydrological analysis and flow measurement of different spring sources and streams, Monitoring of Spring Discharges around the Kulekhani III Hydropower Project Area.

* June, 2001 - February, 2002: As a hydro-geologist involved in monitoring, supervision and sanitary inspection of Community Based Rural Water Supply Systems (Groundwater) - Batch III & IV in Jhapa, Ilam, Dhanusha and Sarlahee districts under Rural Water Supply and Sanitation Fund Development Board (RWSSFDB).

* May - June, 2001: As a hydro-geologist involved in Hydrological analysis and flow measurement of different spring sources and streams, Middle Marsyangdi Hydroelectric Project NEA, TAEC/NESS JV.

* June- December, 2001: As a hydro-geologist involved in monitoring, supervision and sanitary inspection of Community Based Rural Water Supply Systems (Groundwater) in Jhapa, Ilam, Dhanusha and Sarlahee districts under Rural Water Supply and Sanitation Fund Development Board (RWSSFDB).

* July 25 - August 13, 2001: As a consultant hydro-geologist, involved in construction of one number of 8¡¨ throughout deep tube well of 40 m depth at the premises Balaju Industrial District, Balaju, Kathmandu from Balaju Industrial District (BID). My works were: Tube well designing, Electrical logging of borehole, preparation of geological logs of drilled wells, analysis of geological samples obtained during drilling, well development, Pumping test and analysis of pumping test data and preparation of report on tube well.

* June 16 -30, 2001: involved as a consultant hydro-geologist involved in Ground water investigation at Banepa Municipality under Nepal Water Supply Corporation (NWSC), Branch Office, Banepa, Kavrepalanchowk, from APTCOS P. Ltd. My works were to carry out resistivity survey for the potentiality of ground water, to investigate the actual depth required for drilling for ground water exploitation, to design and estimate of the proposed well.

* February- June, 2000: As a hydrologist involved in monitoring, supervision and sanitary inspection of Community Based Rural Water Supply Systems (Gravity Flow) - Batch II & III in Kathmandu, Bhaktapur, Makawanpur, Chitwan, Nawalparasi, Rasuwa, Nuwakot, Kavre and Sindhupalchowk districts under Rural Water Supply and Sanitation Fund Development Board (RWSSFDB).

* June, 2000 - Jan, 2001: As a hydrologist involved in pre and post - monsoon water quality sampling and flow measurement of Bagmati River and its tributaries at different sections as a part of Environmental Impact Assessment (EIA), under Melamchi Water Supply Project.

* July - August, 2000: As a consultant hydro-geologist, involved in construction of one number of 6¡¨ throughout deep tube well of 250 m depth at the premises of Kantipur Publication (P) Ltd, from GEOCE Ground Water Development Company (P) Ltd.. My works were: Tube well designing, Electrical logging of borehole, preparation of geological logs of drilled wells, analysis of geological samples obtained during drilling, well development, Pumping test and analysis of pumping test data and preparation of report on tube well.

* June - July, 2000: As a consultant hydro-geologist, involved in construction of one number of 4¡¨ throughout shallow tube well of 17m depth at the premises of Himalayan Hygienic Snax & Noodles P Ltd, from APTCOS P. Ltd.. My works were: Tube well designing, Electrical logging of borehole, preparation of geological logs of drilled wells, analysis of geological samples obtained during drilling, well development, Pumping test and analysis of pumping test data and preparation of report on tube well.

* June 1 - 15, 2000: As a consultant hydro-geologist involved in Ground water investigation at the premise of Balaju Industrial District (BID), Balaju, Kathmandu, Nepal from APTCOS P. Ltd. My works were to carry out resistivity survey for the potentiality of ground water, to investigate the actual depth required for drilling for ground water exploitation, to design and estimate of the proposed well.

* March - April, 2000: As a consultant hydro-geologist, involved in construction of one number of 12" x 8" deep tube well of 228m depth at Mandikatar, Kathmandu under District Water Supply Office (DWSO),Babar Mahal, Kathmandu Nepal, from GEOCE Ground Water Development Company (P) Ltd.. My works were: Tube well designing, Electrical logging of borehole, preparation of geological logs of drilled wells, analysis of geological samples obtained during drilling, well development, Pumping test and analysis of pumping test data and preparation of report on tube well.

* November 1999 - April 2000: As a physical environmentalist involved in Environmental Mapping of Kirtipur under NSET - Nepal from Nepal Environmental and Scientific Services P.Ltd. (NESS), Thapathali, Kathmandu. My responsibilities were: prepare baseline water, air and noise quality maps of Kirtipur Municipality for the post - monsoon period, identify possible sources of air, water and noise pollution, identify possible impacts of current air, water and noise pollution on human health and environment etc.

* May-July, 1999: As a geologist, involved in feasibility study of the roads section from Basgadhi-Maina Pokhar Road (8.25 km), Bardiya district, Far-Western Nepal, from MULTI Disciplinary Consultants (P) Ltd. jointly with DEIMOS Engineering Consultants, Kathmandu Nepal.

* May-July, 1999: As a geologist, involved in feasibility study of the roads section from Jogbudha-Simalkhet-Tatopani-Brahmakhel Road (16.75 km), Dadeldhura district, Far-Western Nepal, from MULTI Disciplinary Consultants (P) Ltd. jointly with DEIMOS Engineering Consultants, Kathmandu Nepal.

* September-November, 1998: As a Hydro-geologist, involved in designing, monitoring and construction of one number of 8''„e8'' dia-meter deep-tube well, 80m depth, at Refugee Camp, Sanischare, Morang under The Lutheran World Federation, Department For World Service- Nepal Programme, Bhutanese Refugee Project, Damak, Jhapa from National Drilling Company of Nepal Limited (Semi-Government Organization).

* November, 1998 to February, 1999: As a Hydro-geologist, involved in designing, monitoring and construction of one number of 10''„e8'' dia-meter deep-tube well, 80m depth., at Refugee Camp, Beldangi, Morang under under The Lutheran World Federation, Department For World Service- Nepal Programme, Bhutanese Refugee Project, Damak, Jhapa from National Drilling Company of Nepal Limited (Semi-Government Organization).

* June to October, 1998: As Physical Environmental Expert involved in Prefeasibility Level Technical and Environmental Study of Birethanti - Jomsom Ropeway Corridor under Muktinath Darshan Sewa (P) Ltd.,New Baneshwor, Kathmandu from Nepal Environmental and Scientific Services Private Limited. My responsibilities were: Study of the baseline environmental condition for physical environment along the ropeway corridor, survey of the proposed ropeway alignment for physical environment, identify and analysis of the significant environmental issues, recommend the mitigation measure with details of mitigation and monitoring plan and prepare environmental Impact Statement.

* October to December 1998: As a geologist in Biocoal Project Preliminary study in Jomsom area, Japanese Environmental Fund, from Nepal Environmental and scientific services Private Limited.

* May 1-21:Hydrogeological Study of Caldes River basin, Morella, Castellon Province, Spain, 1997

* May 22-June7: Hydrogeological Investigation in Hard Rock, Salamanka, Spain,1997

* December 1995 to August 1998: As a Hydrogeologist, principal investigator and site incharge to conduct the feasibility study on the potential use of groundwater, to prepare design, estimate and supervision of tubewell construction; to carry out the electrical logging of boreholes; to carry out pumping test and also assist in pump installation works undertaken by Nedrill in different parts of Nepal.

* May 1995: Investigation of Groundwater Potential at the premises of Banepa Municipality, Banepa, Kavrepalanchok, Nepal, 1995.

* January, 1994: Field Study of Geophysical and Engineering Geology in Lesser Himalaya, Melamchi Area, Nepal

* December, 1993: Field Study of Paleontology and Stratigraphy in Siwalik of Dang Area, Nepal

* January to February 1993: Field Study of Geology of Himalaya in Butwal Tansen Area of Western Nepal

12. SEMINAR, CONFERENCE
WORKSHOP AND AWARDS
: 9th Himalaya -Karakurum -Tibet Workshop, organised by Nepal Geological Society, Kathmandu, Nepal,1-4 April;,1994(Participant)

: Geoscience in Mountain Environment and Infrastructure Development, Jointly organised by Central Department of Geology, Tribhuvan University and Water Induced Disaster Prevention Technical Center, HMG/Nepal, Oct.12-14, 1993, (Participant)

: National Meeting and Seminar on Geoscientific Inputs in Natural Disaster Management, organized by Nepal Geological Society on the Occasion of International Day for Natural Disaster Reduction (IDNDR), Oct.13,1993(Participant)

: RONAST (Royal Nepal Academy for Science and Technology) Research Scholarship for Master Degree Thesis Awarded to the Top Five Students of each Department of Tribhuvan University

Netherlands Fellowship Program (NFP) for study Groundwater Water Resources Survey Course in International Institute of Aerospace and Earth Sciences (ITC), Enschede, The Netherlands

View contact information...
«« previous resume next resume »»
Search Results (Resumes 8801 to 8850 of 15512)Go to Search Parameters...
Brief Description
I am a science graduate Mumbai University, India. I am in Instrumentation field form last 10yrs. I had an excellent opportunity to work on different types of field instruments, On-line Gas chromatographs (PGC), different types of analysers, D.C.S., E.S.D. andPLC.
I have an excellent amount of experience in the Personnel/HR management 12 years (1996 – present). My current position is HUMAN RESOURCES MANAGER /ADVISOR, Abu Dhabi.
seven years of experience in process engineering support, basic and detailed engineering, commissioning, and plant operation of gas sweetening (using specialty solvent, MDEA), dehydration of the sweetened gas, polyethylene terephthalate production and wastewater treatment units
Experienced mud engineer
Ten years Experience @ various construction sites like LNG Terminal, Infrastructures, Marine/Offshore, Jetties, Break water, Port Commercial & Residential Building projects with skill in Site Management, Execution & QA/QC. Work experience with Saipem S.A, Ballast Nedam / Foster Wheeler, Besix-Kier
Experienced gas Pipline Engineer and Strong background in Petroleum Engineer
Senior instrument technician
Estimator / Quantity Surveyor
OBJECTIVE: To obtain a rewarding and challenging position in a growing company which will utilize my Construction Estimating / Project Management skills and abilities.
A system engineer with more than ten years experience in process control and oil field development and implementation.
Seeking mid to senior level position in project management of sector specific projects. Interested in environmental and social assessment, auditing, due-diligence, policy analysis, and corporate social responsibility. Would like to travel, conduct audits, manage clients, and business development.
16 years experience in construction Health, Safety and Environmental. OSHA 500 & 501, B-SAF (Behavioral Safety Audit Formula) developer. International experience. Active passport.
Key Qualities 10 years experience in plant design and piping lay-out. 4 years experience in using Intergraph’s PDS 3D system. Experienced in Auto Cad, Microstation, Autoplant 3D Finished PDMS training course, Modules 1 and 2
Senior engineer with extensive experience in environmental management, environmental software development and regulatory compliance and enforcement. Excellent People skills and well traveled in Europe and Southamerica. Military Clearance and References available upon request.
Field: Technical Services (Petroleum Fuels) Experience: 10 years (6 years in Petroleum Sector)
I have been associated for the past 10 years with Fertilizer & Petrochemical Industry. I have worked as a Senior Metallurgical Engineer with specialization in the field of welding technology, non-destructive inspection techniques & product analysis and its development.
Process Design and Commissioning of Raw Water Treatment Plant, Waste Water Treatment Plant, Demineralization water Treatment Plant, Tertiary Treatment Plants ,Solid and Hazardous waste management, Safety and Environmental Audits etc for mega oil Refineries and Petrochemical Complexes.
I have worked for over 10 years for Schlumberger Oilfield Services. My career with Schlumberger has involved mostly hard rock stimulation, some coal bed methane stimulation, coiled tubing and cementing. I have been involved in the design, execution and management of these areas.
Experienced (~10 years) specialist in electronics and IT / former army officer. Languages: German, English, Basics in French and Spain Skills: PLC, instrumentation, electronics, computers
Onshore pipeline(above ground/ buried)and Plant piping engineering and design. Stress analysis-using CAESAR-II, for static, dynamic, wind, earthquake, flange leakage, Slug, and Water Hammer analysis. Familiar with concerned codes viz.ASME,API,WRC,etc.
PRESENTLY WORKING AS VICE PRESIDENT - TECHNICAL WITH M/S.AEGIS LOGISTICS LTD.MUMBAI,INDIA
To secure a challenging senior middle level hierarchical position, as a professional Naval Architect, in a Modern Shipbuilding / Ship repair yard/ Oil, Gas or Offshore industry, worldwide, that offers both a challenge and a good opportunity for growth in career.
Environmental Scientist/Project Manager with more than six years experience managing projects totalling nearly $2M in value. Consistently of exceeding expectations. Superior writing/oral communication skills and interpersonal/analytical abilities. Willing to relocate and/or travel nationally/abroad.
A results driven professional with 7+ years experience in electrical engineering, production support and leadership.
My present Job as well as the work I did for Santa Rosa w/ the Syzemograph will be what pertains to the oil & gas Industry
Seeking a position where I will be able to use my knowledge and talents to meet my employer's expectation.
Work Experience of 7 years - presently working with GE Capital Intl Services in India (From past 5 years). Presently working as Asst Manager
static equipment, storage tanks, API650, pressure vessels, ASME, fluent English, good German, MSc, Bsc, petrochemical, oil
I am responsible for all instrumentation, maintenance modification, and repairs for plant machinery and furnace maintenance. I have strong supervisory experience in a petrochemical plant. My experience also includes extensive electrical/HVAC knowledge.
A Professional and Versatile QA/QC and Inspection Engineer with 10 years effective hands on experience in QA/QC ,NDT and Welding inspection,
Enthusiastic Environmental Geologist with MS in Geology
I have got very good experience in electrical projects execution please get me a suitable job in USA/UK/OVERSEAS
Production Geologist - Onshore Texas and Mid-Continent. Strong background in operations, log analysis and correlation, seismic interpretation and computer mapping, prospect evaluation, and well planning. Extensive background in fractured carbonates and horizontal drilling operations.
Graduate Mechanical Engineer with I firm foundation in power generation, mechanical-thermal design, solid modelling, heat transfer, CFD, thermodynamics, project management and manufacturing experience.
Position as Contracts Administrator using 10 years of experience as oil and gas industry contract consultant and contract compliance auditor.
DRILLING ENGINEER: Experience in drilling design engineering in horizontal, directional and verticals wells. Specialist in horizontal drilling, SAGD well drilling projects, trajectory well design, casing design, bit selection and drilling softwares. experience in drilling project planning.
Assistant Project Manager for Design/Build Company. Successful completion, on time and at budget for multi-residential projects. Company liaison for Owner and Clients. Responsible for research, analysis and response to insurance companies for plicy compliance
I am confident , professional heavy equipment operator , with over 15 years experience in a wide range of fields .
A self confident, motivated and energetic person, able to cope with rapid change in corporate culture, strong technical analysis, management and computer skill, able to work under pressure, willing to learn.
Seven years experience.
Almost 10 years of active experience in Coordinating Occupational Health, Safety and Environment activities
I am an international business transaction professional, with five years experience specializing in the rail transportation and oil industries. I am currently an MBA student specializing in international business.
As an active electrical designer within radar, sonar and instrumentation for ten years, Fabian has a unique experience with respect to product design and manufacturing efforts. His work within an ISO9000 system has produced solid craftsmanship, with due to diligence to Quality Control.
Engineer, 10 Years experienced, Construction management of industrial projects
I have Worked has Process Control Room & Field Operator in Indian Organic Chemicals Limited, Chennai, India for 14 years and has Control Room and Field Operator Oman Chemical Industries Limited (S.A.O.G), Oman for 2 years
Almost sixteen years of experience covering environmental management of large infrastructure developments, including mine sites, pipeline and transport corridor construction projects and offshore/onshore oil and gas. Experienced in a wide range of environmental and site safety issues.
Over 15 years experience of Project Management and Specialist Engineering on numerous project task forces in the oil refining and gas processing industry.
I have seven years of experiences in the field of water well drilling as a hydrogeologist .
More than 15 years of Oilfield experience and Drilling Services with Schlumberger. worked in many countries in different positions starting from Engineer Trainee to Staff Engineer, Rig Manager, Operations Manager and now (SDS) QHSE Manager worldwide.
I have over 10 years of experience as a Rotating Machinery / Reliability Engineer in various industries. I am looking for a full time or contract position overseas as a rotating machinery engineer.
First   Prev   151   152   153   154   155   156   157   158   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   [ 177 ]   178   179   180   181   182   183   184   185   186   187   188   189   190   191   192   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com