Resume - Having more than 12 yrs experience in safety field. Ready to accept any new chal...

Misco Jobs

Resume #40005

CONTACT INFORMATION:
View contact information...

Professionally qualified in oilfield safety with more than 10 years experience. Accomplished in all areas related to onshore/offshore oilfield safety..

LINGUISTIC SKILL: English, Hindi & Kannada

ACADEMIC QUALIFICATION
* Graduate in B.Sc from Mangalore University, Karnataka (India)

ADDED CREDENTIALS
* Diploma in Industrial Safety and Labour Management Awarded in 1997
Institute: National Institute of Labour Education & Management, Chennai (India).
Computer Ingenuity
Operating System: MS-DOS, Windows 2000
Word Processor: MS-WORD
Spreadsheet: MS-EXCEL
Internet

TRAINING/COURSES/SEMINARS ATTENDED
Completed Hydrogen Sulphide (H2S) and Breathing Apparatus

From Technical Inspection Bureau, Abu Dhabi Associated with Robert W-Hunt Co USE. H2S Classification, Hazardous and Detection Devices System, confined Space Precautions and Prevention of Gas buildup classification and type of BA sets, BA high and low pressure tests and basic care and maintenance, operation techniques and donning and doffing BA sets in emergency and appropriate storage and practical demonstrations.

Fire Fighting

From TIB, Abu Dhabi. The course undergone with fire classifications and type of fire, fire extinguishers, fire precautions, ignition sources and detection systems, emergency response and procedure and management with practical illustration.

Completed Offshore Sea Survival Course

From TIB, Abu Dhabi. The course concludes with introduction of Sea Survival, Rescue and Life Rafts, Sea Exercise and Abandonment/Evacuation Exercise, use of life jackets, Personnel transfer from boat to ship and basic navigation skills using wind and current direction.

Completed course in HSE

From TIB, Abu Dhabi. The course concluded with HSE procedures, Safe Practices & Protection of Personnel, Environment & Equipment, good house keeping and general hygiene, emergency procedures, Crises management & Incident reporting, Waste management, Industrial hazardous, Occupational Health and Environmental Management. Handle of dangerous materials like Chemicals according to MSDS.

Completed Basic First Aid Course

From TIB, Abu Dhabi and trained in objectives and Situation, Casualty Assessment, Practical Recovery position & Orientation CPR. Understanding unconsciousness, shock & Choking, basic awareness of heart stroke problems, breathing, bleeding, burns and bones.

Attended H2S Seminar conducted by MIDAS Safety at Dubai (UAE)

Attended ISO-9000:2000 seminar conducted by Texas Management Services at Dubai (UAE).

Practical Risk Management Course completed from Dubai Men's College for Higher Education and Technology.

Completed Behavioral Safety auditing from Fortune Risk Management Consultancy, Mumbai.

Completed Environmental Awareness Course from Fortune Risk Management Consultancy, Mumbai.

JOB EXPERIENCE
Served for SHV Energy North West India Ltd (sister company of Govt of India (ONGC) from 21 Mar 94 to 18 Jun 1997.

Position: Safety Engineer
Work Location: Onshore/Offshore

Worked on drilling rigs as Field safety Engineer for more than 3 years. Responsible for Health, Safety and Environment. Nature of jobs includes giving safety training to contractor employees at offshore. Regular visit to offshore for conducting training to the workforce about HSE. Supervision and guidance to excavation jobs, radiography and other operation like welding, grinding, lifting etc. Periodical inspections of equipment and machines including house keeping at work
Site. Conducting safety induction course, performing daily routine inspections, investigation and analysis of accidents an advising them to from accident free work zone. Conducting regular internal training to the workforce towards H2S, Breathing apparatus, Fire Fighting, First Aid, Safety harness, PPE, Waste Management, Chemical handling and transportation. Preparing all documents related to HSE. Carry out internal audit and submit the report to the HSE Management for review. Carry out and follow up action. Carry out risk analysis, job safety analysis and conducting pre job safety meeting on site.

Served for CENTRAL INDIA FABRICATION WORKS LTD. From 15 July 1997 to 20 May 1999.
Position: Safety Engineer

Monitors Safety general requirements such as safety programs, Safety rules, PPE, PTW systems, emergency response exercise, Toolbox meetings etc. Prepares/Submits monthly safety returns, quarterly submission of safety programs/monthly statistics/action summaries. Prepares/Monitors emergency response plans, fire extinguishers plan, assist to prepare risk assessment for jobs with potential hazards such as hydro testing, radiography, tie-in, night works etc. Conducting indoctrination to new comers ensures group meetings and toolbox meeting talks are compiled and documented on week/monthly basis.

Served for: BIN HAM PETROLINE From 01 Jan 2000 to 07 April 2001. UAE oilfield company

Position: HSE Engineer

Nature of Job: Meeting all the Client Safety Standard on the job sites. In-charge of Health, Safety and Environment Management Systems (HSE-MS). Conducting monthly safety meeting and submitting reports to head office ADMA-OPCO and ADCO. Conducting internal training to the workforce towards H2S, breathing Apparatus, Fire Fighting equipment, First Aid, Safety harness, PPE, Environmental Protection, Waste Management, Chemical handling and transportation, emergency Eye Wash etc. Conducting Emergency drills every week and giving demonstration and guidance during emergency period. Conducting pre job meetings and preparing contingency plan for the risks involved in the job. Carry out internal safety audit/inspection on work sites and base and checking lifting gears, color codes and other equipment, which are using in the operation. Conducting safety induction course to the new employees. Liaison with ADMA-OPCO and ADCO. Conducting self-audit and submission report to head office. Carried out all duties related to HSE. Worked all onshore Oil Fields like Buhasa, Habshan, Bab and Sahil. Responsible for Client HSE-MS audit and Inspection.

Serving for Al Roumi Oilfield supply and Serivce company since April 2001
Position: H2S Engineer (Air Loop)

Work Location: Off-shore Drilling Rigs
Duties & Responsibilities:
- Induction course to every new arrival on board. Weekly training to on-board personnel about donning and doffing of BA sets, Properties and characters of H2S, using of air loop system, Evacuation of victim and First aid during emergency.
- Familiarize and remain cognizant of all drilling activities which could produce an H2S release; i.e., well kicks, bottoms up circulation, coring operations, well sting/logging, abnormal well conditions, etc.
- Check H2S Detection System for proper operation and perform H2S calibration checks once every 24 hour period and every 12 hours once H2S has been detected. Recalibrate sensors, as required, and record that sensor checks and calibrations were conducted in the Drilling Contractor's IADC Log
- Maintain daily contact with Company Man, reporting on status of equipment readiness, maintenance performed, and drills or training completed that day
- Conduct "H2S Awareness and Safety BA Training" for all new personnel arriving on the rig. Training and safety equipment orientation on arrival
- Check and maintenance of all 5/10 minute and 30 minute SCBA are functional and fully charged
- Insure that all Cascade Air Banks are charged, on-line, and capable of recharging SCBA. Check system for signs of air leaks. Insure operability of both Electric and Diesel Air Compressors
- During activities that have a potential for an H2S release, provide continuous monitoring with H2S personal Detector Tubes and checking in open air by using detector tubes.
- Maintain communication with the Mud Engineer to insure that Sulfide analysis is being performed on the mud flow-line. The Mud Engineer can often provide a precursor of information on a pending H2S gas release
- Maintain a running inventory of location and availability of all Safety Equipment. Maintain ongoing efforts to keep equipment clean
- prepared to assess the presence of H2S and SO2 if the Gas Flare is ignited
- Complete the Daily Report Log entry on each day's activities.
- Conducting Weekly H2S Drills. Drill conducting 24 hours of a crew change and every 7 days thereafter during the course of their shift. Critique, Grade the Drill, and provide comments and recommendations for areas requiring improvement to the Company Man. If the Drill was found to be unsatisfactory, immediate corrective action is required with a follow-up drill conducted within 24 hours
- Routine checks of all SCBA Units, cascades, high and low pressure hoses, H2S sensors, quick connections and O2 Resuscitators. Clean and sanitize respirator masks as needed. Insures units are properly stored for emergency donning access. Record results on the SCBA Inspection Report Form contained in the carrying case
- Perform Weekly Air Compressor & Air Cascade Air Quality Checks. Insures all entries have been made on the Breathing Air Compressor Operating Log for weekly operating and service activities
- Ensure proper operation of all Alarm Stations. This can be accomplished in conjunction with the conduct of the Weekly H2S Drill
- Review daily and weekly documentation requirements to insure all forms are current, accurate, and completely filled in. Store all forms for retention in their proper storage location
- Conduct Functional Checks of all SCBA equipment. Record results on the SCBA Inspection Record Card contained in each carrying case. Check O2 Resuscitators and sanitize respirator masks as needed

- Insure that any maintenance with regard to Air Compressor operations has been accomplished; i.e., air purification cartridge changes, oil changes, and other filter changes as may be needed
- Perform inspections and functional checks of Safety equipment installed on attending crew or workboats.

Emergency Response Duties:
- In the case of an H2S release, be prepared to don SCBA equipment and perform continuous H2S monitoring until the release is stopped or the order to evacuate has been announced.
- Monitor and determine size and scope of the H2S plume and provide recommendations, based upon monitored conditions, to the Company Man so that proper course of actions can be taken to protect rig personnel from an H2S exposure.
- Insures that all Air Breathing System Cascade Stations are placed fully on-line to provide an adequate quantity of Breathing Air to the Primary and/or Secondary Briefing Areas. Insure the same is done for other cascade stations.
- Remain in constant communication with the Company Man as a source of information and advice.

Additional Duties and Responsibilities:
- Helping H2S Detection System and Breathing Air safety equipment Installation. Check for proper operational functions and calibrate according to the procedures. Conduct Training for H2S Awareness, Emergency Response Procedures, and proper SCBA use and plug into the air loop system.
- Air loop equipment rigging up and rigging down on rigs at offshore.
HSE – MS/ ISO documentation
- All HSE documents for Client's audit and inspection and completing follow up action.
- Review and follow up all company related HSE documents and objectives.
- Carry out quarterly internal and site HSE audit and inspection.
- Conducting orientation training to the new employees.
- Conducting induction course to the new employees.
- Conducting quarterly safety meeting and preparing reports and follow up action.
- Selecting Safety Man and sending recommendation to the management.
- Carry out sub contractors HSE audit and inspection and preparing and sending audit report to the sub contractor.
- Prepared the entire HSE related documents for ISO certification.
- Worked as a Company Representative during ISO certification and Coordinated with the management and the ISO certification company during ISO audit and inspection.
I heI hereby declare that all the above mentioned particulars are true and correct to the best of my knowledge.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7001 to 7050 of 15341)

Go to Search Parameters...

Brief Description

Analysis Estimation-Officer 10 years as operations engineer in power plant

HSE, H2S, Fire fighting, Fire protection, Inspection, Rig or Plant, Off or on Shore

Electrical Engineer, Transformer especiallist, excellent project management, supervised High Voltage test field project C$ 20 M, excellent computer skills including networks administration

Master Qualified Instrument Engineer with 10 years experience of detailed design engineer

Working as Mechanical Maintenance Supervisor.

Summary of Experience

Masters Degree in Metallurgical Egg with Specilisation in Welding Egg. Prepare, Review & Approve Welding Procedures as per various Codes / Standards. API 510 Pressure Vessel Inspector.· Trouble shooting of welding and related issues.

Inst. Engineer with 13 years Inst. Design experience in the field of Oil. Petrochemical Refineries. Attended FAT/ SAT, Hazop etc.

Seeking professional or technical employment in Software Engineering, Computer Science, or Web Development. Offering extensive education and experience in computer science and mathematics.

Operation Drilling Engineer - Drilling Superintendent - Drilling/Completion/Work Over Supervisor

30 + years in Security and Law Enforcement. Extensive management experience having worked in several positions throughout the world

The past ten years in the construction industry has been most fruitful and challenging as I have found that supervision work includes duties of engineers,architects & contractors at times, from co-ordinating M&E & Architectural activities down to helping the main contractor to arrange meeting with c

Construction Manager / Superintendent /Commercial

Project Manager/ Superitendent/Estimator

PDS, CADWorx, Rebis AutoPlant

HSE Officer

24 years exp. oil and gas manufacturing, machining, repairing, rebuilding of all components of drilling and service rigs. Also gas plant experience. Have a red seal machinist ticket acquired with a grade 12 education at the northern institute of technology, Edmonton Alberta Canada.

A senior Process Analyzer Specialist with twenty – five years of experience in the Petro Chemical Industry. Strengths include: design work, upgrades, start–up assistance, works to meet tight deadlines and budgets; pays close attention to detail.

Fully experienced in all aspects of maintenance of oil and gas production facilities, hands on experience of major overhauls of rotating equipment which includes operation of GE frame 5 Gas turbines.Responsible for supervision of all disciplines to ensure safe and efficient maintenance proceedures.

About 10 years experience working for Copper and Cobalt mine. Experienced in both underground and Openpit minig methods. Proficient in the use of datamine mining software, and I'm conversant with both underground and opepit mapping

Exploration Geologist, Geologist, good in Mapping, drill crew supervicing, Diamond and RC core logging, trainning of local field assistants and field technicians, office management and administration, map production, report writing

I m B. Tech. in Bitechnology working as Mud Engineer

Professional Qualified Accountant-CPA(K), Diploma in HR Management holder & have a hands on experience in Fund Accounting . I am a team player, work with minimum supervision, dependable and expert of high integrity. I have hands on experience in Computerized Accounts i.e QuickBooks & Sage

I am working as a Plant Inspector with AIB-Vincotte International ltd. I am involved in inspection activities in Petroleum sector for the last 11 years, am well familiar with most of International codes and standrards such as API, ASME, BS, ISO etc.

reated designs for electrical equipment, conduit, and cable in power plants. created equipment schedules, conduit schedules, and cabling schedules to be used in the field. also created wiring lists to keep track of cables and wiring documentation in excel format and gsn

20 years of project management, EPCM international experience in Oil & Gas. On shore, chemical, petro chemical, LNG, power plants, offshore platforms, from inception of project through design to built up & close out. Cost estimation of global tenders of capital projects,.

I'm a Mechanical Engineering Graduate with vast experience in oilfield static and rotating equipment operations and process drawings

INSTRUMENTATION ENGINEER EXP. IN OIL&GAS FROM SAUDI ARAMCO PROJECT

Able to operate and maintain well and familiar with typical oil / gas production flowing well, Sub Sea Well and Gas lift well.

Rotating Equipments : Centrifugal Pumps, Split Casing Pumps,Sea water pumps Steam Turbines, Gas Turbines, Reciprocating Compressors, Turbo Compressors, Rotary Feeders, Lobe Blowers, Conveyer Belts ,Diesel Generator ,Hydraulic pump, High pressure piping, valves, High pressure water tube boiler, Heat

I have worked as Mudlogging Geologist in Baker Hughes Inteq For two years, For detail View my CV

The above given details are true to best of my knowledge & if any wrong I agree to do your needful.

B.E. graduate with more than 2 yrs of experience in Primavera and IT

Mechanical engineer having more than 2 years of experince in mantanance of underground mining machineries in coal and metal mines .

Driller

Piping design engineer (pdms) with 2+ years exp.

BE MECHANICAL WITH POST GRADUATION IN PIPING ENGINEERING, PDMS,AUTOCAD 2004

More than 8 Years of experience in the field of ELV System specialist well versed in Installation testing and commissioning of systems Including Building management system, CCTV System, Access Control system , Structured cabling etc..Having gained extensive experience as a team leader in execution

Working for Schlumberger oilfield services as Directional Drilling Engineer in Republic of Yemen

DCS AUTOMATION SYSTEM DESIGN ENGINEER

COmputer Literate--AutoCadd,Primavera,MSoffice Applications

with computer proficiency in SESAM, ABAQUS, PATRAN, FLEXCOM, ASAS, SACS, FEMGV, STAAD Pro, AutoCAD, and MathCAD

Extensive diverse EPC Management, Operations, Consulting - domestic & world=wide, all disciplines Refinery, Petrochem, Chemical and Pharm. projects, operations and plant trouble shooting with associates power and infrastructure.

Managing multidisciplinary Sub Surface Team in respect of strategic planning, coordination and monitoring of sub surface activities

Expertise in analysis of Chemicals, petrochemicals, petroleum products using instruments like ICP-OES, GC, HPLC, AAS, FTIR, CS Analyzer etc. Having expertise in SPC / SQC techniques, LIMS and SAP QM module. Research in Petrochemical and petroleum products. Worked for Chevron Oronite lube additive co

If you are looking out for someone who can 'Make a difference', Daring, Challenging, 'Thinking out of the box', Multi-tasking ability, is not afraid to speak up his mind plus Business Development, People Management proven experience & skills, please read this application.

Exploration geologist in oil company. Structural geologist

Ph.D., Zoology (Commanded) Bharathidasan University, Tiruchirappalli, Tamilnadu, India, Thesis title-Oil effluent toxicity and detoxification responses in the freshwater mussel, Lamellidens marginalis

Having more than 12 yrs experience in safety field. Ready to accept any new challange. could able to work any pressure environment.

I have 22 years of experience in the mining industry, Blasting Certificate For Open Cast Mines; Blasting Certificate For Scheduled Mines; Detnet Blasting Certificate.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 [ 141 ] 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out