Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #4017 next resume »»
CONTACT INFORMATION:
View contact information...

CURRICULUM VITAE

Languages: Dutch, English and German.

Education: MBO-Royal Dutch Navy Engineer.

Computer skills: MS-office

Certificates: NACE Certified Coating Inspector #
7278.

Nationality: Dutch

Training: NACE CIP course session I, II, III
and Peer review.
: Ameron training course on corrosion and corrosion control, and annual training on new products and techniques (incl. discussions on coatings in general).
: Course on application and inspection of fire proofing materials-Mandoval.
: Plural component pump application
Baytec-Germany.
: Insurance Inspector indemnity claims.
: Various courses Royal Dutch Navy.

Professional Membership: NACE - National Association of
Corrosion Engineers

Mobility: Single International Mobile,
Rotational, Hardship Location,

Summary of Experience

: Twenty years Coating Manufacturer's Representative as Senior Field Service
Engineer.
Coating Consultant/Inspector in surface preparation, coating application and specifying.
Fireproofing Inspector.

: Fully conversant with a diversified range of coatings, paints, paint techniques, and special coatings such as; Spray Applied Coatings, Reinforced
Linings, Metallizing, Fireproof Coatings, Plural Component Spray, Shop
Painting, Thick Floor Toppings, Cement Coatings, Inorganic Zinc Silicates, et cétera.
: (Mega) Yacht Coatings for various owners (Fairing and Finish Coatings)

Employers

2002 – present: Freelance (3rd party) Coating Inspector
Coating Consultant
Coating Surveyor
Coating Supervisor
Vendor Surveillance

1982 - 2001: Ameron International BV, Netherlands
Protective Coatings Group
Senior Field Service Engineer

1980 - 1982: Nationale Nederlanden, Netherlands
Insurance Inspector Technical aspects

1972 - 1979: Saybolt van Duyn, Netherlands & Italy
Cargo Inspector Mineral Oils

1970 - 1971: Smit International, Netherlands
Salvage Engineer

1964 - 1970: Royal Dutch Navy
Gunfire Control Engineer

Employers and work experience

Freelance: Coating Inspection/Supervision, Fire Proofing
Inspection on refineries, chemical plants, ships, mega yachts, etc.

Ameron International: Manufacturers Technical Representative/Coating
Inspector and Coating Surveyor - on offshore, onshore
& marine structures in Europe, Africa, Middle & Far
East and C.I.S countries.
Working also as a coating specialist in training people for surface preparation and coating application in the Industry in general.

Nationale Nederlanden: Insurance Inspector technical aspects-
inspection of buildings and other objects on fire prevention for acceptance, and handling indemnity claims.

Saybolt van Duyn: Gargo Inspector - to control the quality &
quantity during loading and discharging of mineral oils.
Smit International: Salvage Engineer and Runner - to assist with salvaging vessels and to be co- responsible for the floating object to be towed.

Royal Dutch Navy: Radar Operator Gun Fire Control- to locate and eliminate the Target by gunfire.


Quality Control coating inspection and Consultancy on new buildings (bi-weekly visits)
Pennzoil offshore platforms - Netherlands.
Unocal offshore platform - Netherlands.
Danbor Gas Development offshore platform - Netherlands.
Elf Aquitaine living quarter - France.
Elf Rospomare offshore platform - Italy.
Micoperi spools - Netherlands.
NATO jetty piles - Sicily, Italy.
Norsk Hydro-Netherlands and Poland.
Vekoma roller coasters for Disney World - Netherlands.
Shell Auger and Mars/Tension Leg Platforms Hull construction - Italy.
Jetty piles N.I.O.C.- Bandar Abbas, Iran.
Shell Hycon Complex - Netherlands.
ABB Power station's - Libya, Abu Dhabi.
Statoil Karsto Gas terminal Haugesund - Norway.
Iritec/N.I.O.C. storage buildings - Tehran, Iran.
British Gas Armada offshore project - Scotland, U.K.
Siemens Power Station - India.
Al Taweelah B - Abu Dhabi.
Mooring Buoys NPCC, Noel Imac - Abu Dhabi
Gamesa Windmills - Spain
London Underground Line (LUL) - U.K.
Tekol Maribor Nuclear Power station - Slovenia.
Bluewater FPSO 'Bleo Holm - Scotland, U.K.
Road Bridges Polish Government - Poland.
NEM Power Station's (USA) – Hungary.
Leuna 2000 refinery - Germany
AFR railcar decks and train boogies Euro tunnel - France.
Great Made Man River Project GMRA concrete PCC piping - Libya.
Windmills various owners - Germany
(Mega)Yacht New Buildings - Various Owners Worldwide

Quality Control coating inspection maintenance
McDermott platforms-Belgium.
Petroland offshore-Northsea.
Placid Oil offshore-North sea.
Carlsberg Malt plant-Denmark
Global Houston 4x offshore drilling platforms-Gabon.
Leuna 2000 refinery-Germany.
Heerema crane ship "Balder"-Rozenburg, Netherlands.

Full time Quality Control Inspection and Supervision

1985-1986
Client - Phillips Petroleum - Mannesmann, Netherlands.
Project - Ekofisk Platforms 2/4K total rehab job.
Duties - Coating Inspector, Architectural Inspector, Fire Proofing Inspector,
- Insulation Inspector.

1988-1991
Client - Napetco-Marsa El Brega,Libya
Project - Maintenance on a running- fertilizer plant (340.000 m2)
Duties - Lead Coating Inspector leading the Q.C. Coating Department.
- Coating Consultant

1992
Client - Sirte Oil Company, Marsa El Brega, Libya
Project - Recoating of the bottom of an 80 mtr. dia. Crude Oil Storage tank with a glass mat reinforced coating system.
Duties - Coating Inspector
- Coating Consultant

1993, 1994 and 1995
Client - Veba Oil Operations-RasLanuf, Libya
Project - Recoating of (3x) 80 mtr. dia. Crude Oil Storage tanks
(internal and external) Contractor MAN – Germany.
Duties - Senior Coating Inspector
- Coating Consultant

1995/1996/1997/1998 (during summertime only)
Client - Neftygaz-Neftyugansk (West Siberia), Russia
Project - Rehab of 70 Crude Oil Storage tanks (440.000 2m)
Duties - Senior Coating Inspector/Supervisor
- Coating and Quality Consultant

2002 September-2003 April
Client - Dubai Ports Authorities - Dubai, UAE
Project - Platinum Mega Yacht new building (160 mtrs)
Duties - Senior Coating Inspector

2003 May-present
Client - MW Kellogg Engineering Ltd
Project - NC2X Revamp Fina Antwerp Olefins Refinery - Belgium
Duties - Coating Inspector/Supervisor
- Fire Proofing Inspector

Corrosion Surveys a.o.
Agip offshore 2x offshore production platforms Bouri Field-Libya.
API mooring platforms-Italy.
Global Houston 4x offshore drilling platforms-Gabon.
Petroland offshore-North sea.
Placid Oil offshore-North sea.
(Mega) Yachts – Worldwide.

Tank coatings and linings, new building/maintenance, coating inspection, corrosion survey (incl.glassmat reinforced) inorganic/organic at NATO, Vopak, Oiltanking, Carbon Black, Shell, Exxon, Elf, Veba Oil - Ras Lanuf, Sirte Oil Company - Marsa El Brega, Agoco - Bengazi, Kuwait Oil Company, ADNOC-Fod., Neftygaz and Lukoil in Russia, Europe, Africa, Middle East.

Marine
For various ship owners such as Stolt Nielsen, Atlantska Plovidba, Jo Tankers, Barber, Royal Dutch Navy, Odfjell SA, ITM ship management-Dubai, etc.- tank linings, hull coatings, corrosion survey, maintenance and new building quality control in Europe, Ukraine, and Middle & Far East.

Yacht Coating Services
Inspection of surface preparation, Fairing and Yacht finish application on new buildings and refits on (mega) yachts up to 160 meter for various yacht owners, reporting to the yacht management.

Coating Inspection for Insurance Companies
Various coating inspection jobs on commercial ship new buildings and (Mega) Yachts - ballast tanks, cargo tanks and holds and hull, reporting to the insurance companies.

Product development
As Senior Field Service Engineer involved with field development of a.o. a Polyurea Coating as tested in the U.S.A., Netherlands and Saudi Arabia.

Trouble shooting
As Senior Field Service Engineer involved in handling and solving coating problems of various nature to the satisfaction of the customers.

Reporting
All the above-mentioned activities have been reported in detail to the customers in the English language.

International Standards
Familiar with international coating standards like; D.I.N., ISO, N.A.C.E., S.S.P.C., etc. including Yacht Finish Standards.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 6401 to 6450 of 15508)Go to Search Parameters...
Brief Description
Dear Sir/Madam, I am an experienced offshore Rig Electrician. Please find enclosed, my resume for your consideration.
I am I have worked extensively on both land and offshore rigs. I always try to perform my job to the best of my ability, with safety to personnel as my #1 goal.
Water industry: French citizen w/U.S. Green card; 27+ years experience in construction & operations and maintenance; electromechanical and site management skills; specialist in process component for W/WW systems
I had more than 20 years experience in Gas Processing plant, previous company I worked for LNG Plant and last position as Utilities Senior Operator and Present company I have been working for Gas Processing as field operator.
Resume CV: To join an offshore drilling company as Rad. operator, Logistics Coordinator any place in the world
I would prefer to work as Commissioning Supervisor in the Middle East.
Objective Production engineer, oilfield engineer, or mechanical engineer in a contracting firm.
Dear Sirs, I am 33 yrs. old, from Romania, Electrical Engineer. I would like to get a job in electrical/administrative petroleum/oil/gas field. Even I've have a Diploma in Electrical field I can accept to work as electrician, technician, foreman, or engineer.
20 years experience in non-destructive testing and inspection as a technician, radiation safety officer, division manager, and project manager.
NACE Certified Coating Inspector #7278, with +20 years of experience, available as (3rd party) Q.A./Q.C. coating inspector, coating surveyor, coating supervisor, vendor surveillance, etc.
I have been working in the Construction Industry for 40 years at all levels up to Construction Manager. I have extensive experience overseas including Africa and Asia. I am looking for similar work and am prepared to work anywhere at immediate notice.
Maintenance of: - Simovert - frequency regulation for the speed control of High Power asynchronous motors 450 KW and 110 KW - Frequency regulation for the speed control of Low Power asynchronous motors - High Voltage switchgear equipments - MCC - Switchgear equipments - Low Voltage -ETC...
I 'm Canadian citizen, I have second class marine engineer.
25 years of experience all over the world in the instrumentation field including 12 years offshore oil platforms, erecting, construction, precommissioning , commissioning and start-up a wide range of pneumatic, hydraulic and electronic instruments, DCS – ESD – F&G systems.
Process Engineer
I accumulated 22 years of experience in the oil industry, most of the time with the Schlumberger service company in the area of Oilfield Services management, Reservoir Evaluation Wire line and Testing.
I have 21 years in Aust Army as Maint Planner/Supervisor with Diploma Engineering (Maint). Experienced trainer in Mincom Logistics computer systems. Willing to relocate nationally or internationally for the right position.
Over twelve years experience in Offshore and Onshore Oil & Gas and Marine Structure Development in National & International government projects. Project engineering management, Engineering, Design, Construction and Project cost estimation.
WORK EXPERIENCE I have 14 years of experience in plant F.C.C ( Fluid Catalic Craking ).Refinery El Palito in Venezuela ( PDVSA ) and experience in Pre commissioning
Over 25 years of exploration drilling and mining experience. Responsible for the coordination of drilling projects in both domestic and international environments.
I was employed by ARCO Indonesia Oil & Gas since April 1980 thru March 1999. My last position was Elect/Instr Supervisor of NGL gas plant refinery located at NorthWest Java sea, for offshore facilities. My current employer is BP-Indonesia, position job as Maintenance Planner.
26 years Mechnical Design Engineering 16 years CAD experience including intensive 3D modeling 14 years product design experience. 12 years manufacturing tooling and facilities experience.
23 years experience in the Electrical Distribution/Electrical Contractor Industry. Wish to acquire a part time or full time position in an office or job site environment.
Job objective: General Supervisor, Field Supervisor, Project Manager or Assistant Project Manager. Interested in overseas opportunities.
Objective: Seeking a career position with a progressive organization where my skills , training and extensive knowledge and experience can be fully utilize, while offering the opportunity for continued career growth.
Highly experienced purchasing and material management professional. Specialized experience in remote, severe climatic locations. Extensive experience in cross cultural work situations.
Curriculum Vitae „h Over 25 years of oilfield experience in Canada „h Mechanic on a seismic crew until tools were stolen „h Roughneck to driller, 11 years as a driller on a drilling rig „h Owner/operator of a vacuum truck business „h Mechanically inclined
BS EE from USA. I have over 14 years of experience in maintenance and projects while working with reputable organization like Exxon, Mobil, Occidental and BP Pakistan in fertilizer, petrochemical and oil/gas E&P industries.
OVER THIRTY YEARS EXPERIENCE AS A FULLY CODED WELDER ALONG WITH FOREMAN, SUPERVISER AND WELDING ENGINEER/CHIEF WELDING ENGINEER POSITONS ALSO UNDERTAKEN ALONG WITH NORMAL WELDER POSITION.
Seeking employment where my years of experience in surface & underground mining & construction, as well as my strong sales, contracting, consulting, and management skills can best be used
Chemical engineer w/ experience in developing various contracts in oil, gas, water, waste treatment & soil road maintenance. Expert w/ performance based contract. Possesses good organizational, team & interpersonal skills. Adept at working & communicating across disciplines & management levels.
Looking for a new challenge at the end of 2003 my present contract end then
Operate, commission and monitor equipment in assigned areas, maintaining parameters with the guide lines of the operating manuals and procedures of 80,000BPD three phase separation multi train crude separation units, 110 MMSCFDgas compression& treatment plants
Strategic Planning Business Development Project and Business Valuation
I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects.
Nobody has climbed up through the steps of success with his hands in his pockets.
Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours
I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC
C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering
I completed my degree in Electrical Engineering and had taken and passed the highest National Examination in The Philippines, Professional Electrical Engineers Examinations in 1986. I have a good experience in Oil and Gas, Controls, Fire and Gas Systems, Design, Detailed Autocad Drafting(Isometric),
Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.
Associate Degree in Mechanical Engineering Draughting, 10 years Experience in various Mechanical and Plant Layout applications, using Inventor, Autocad, Pro Engineer, MSC Patran. Heavy Engineering Environment, International Earth Moving Machinery Manufacturing Company in South Africa.
BE Mechanical Engineer with 5 years experience in Piping Stress Analysis
Experienced exploration / production geophysicist and geologist with major Exploration Companies
22 years oil field Experians. Higher secondary.
Over 23 yrs of heavy earth field mechanic. AAS in Heavy equipment and diesel Technology. Lack final semester for BA in Training Industry & Business. CAT and Kamatsu trained.
AutoCAD, PDS (3-D modeling). Lead engineer of erection department
I hold a degree in Polymer Eng. from the Federal University of Technology Owerri, Nigeria. I am proficient in Autocad 2D/3D modelling, HYSYS, Bentley Auto Plant/P&ID, Boiler Maker, Autodesk Inventor
HIGHLY COMPETENT IN BUILDING AND ROAD CONSTRUCTION WORK(B.ENGINEERING,CIVIL)
Instrumentation technician with nine years experience in maintenence,repair,calibrating and installing of electrical,electronic and pnuematic equipment.
First   Prev   101   102   103   104   105   106   107   108   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   125   126   127   128   [ 129 ]   130   131   132   133   134   135   136   137   138   139   140   141   142   143   144   145   146   147   148   149   150   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com