Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #41371
next resume »»
CONTACT INFORMATION:
View contact information...
Well Site Geologist
EXECUTIVE SUMMARY
A highly skilled Well Site Geologist over 15+ years experience for shell Oman include 11 years with Baker Hughes Inteq, worked mostly in (vertical, deviated and horizontal) deep high pressure and temperature gas wells (include the deepest gas well in North Oman 6235 m ), some exploration and development shallow oil wells, LWD (triple combo) interpretation. And 6 years with Halliburton worked in deep exploration oil wells South of Oman and shallow exploration/development oil and water producer all over Oman
CAREER OBJECTIVE:
I would be grateful to your respectful company if I am given a chance as a Well Site Geologist.
WORK EXPERIENCE:
2000 – Present Well Site Geologist Halliburton (Sperry-Sun)
I have been working with Halliburton (Sperry-Sun) Mud Logging Company as a Well Site Geologist for shell Oman since 2000 till present.
* Well site geologist for Petrogas oil company (Concession Butabul Block 7, Sahmah field, Sahmah 23) 3rd August-30th August 2004 (I have been worked for Elf Aquitaine Oman as a well site geologist in the same field 1990-1992)
* DrilSaver Engineer 5th July – 30th July 2004)
First trial with success in Oman PDO rig 86, DrilSaver is a real-time Torsional Vibration monitor, designed to identify the presence and magnitude of potentially damaging drill pipe torsional vibration (based on analyzing the surface torque to its original components).
* Early kick detection Engineer for few hitches. (both Baker Hughes and Halliburton)
1989 – 2000 Well Site Geologist Baker Hughes Inteq (Exlog)
I have been worked with Baker Hughes Iteq (Exlog) Mud Logging Company as a well site Geologist, (fully computerized units), worked mostly in (vertical, deviated and horizontal) deep high pressure and temperature gas exploration wells including the deepest gas well in Oman, (North of Oman) and the deepest horizontal well, and some developments, exploration shallow wells, LWD (Triple Combo), interpretation, (exposed to petroleum Engineer for 12 years, since late 89 till 2000).
1988 – 1989 Flight Attendant (Egypt Air)
* Flight attendant with Egypt Air for two years (1988/1989).
(455 flying hours)
1987– 1988 Geologist (remote sensing photo image interpreter)
* Geologist in Remote Sensing Center (Academy of Scientific Research and Technology). For one year (1987).
EDUCATION:
* Bachelor of Science, geology department with "good grade" from "Alexandria University", May 1986.
* Languages: Arabic mother tongue, English reading, speaking, writing and understanding.
OIL FIELD STUDIES:
* Fundamentals of remote sensing and some applications in geology (remote sensing center / Cairo/ 1986)
* Oil Familiarization school (Exlog/ Cairo / 1 / 90)
* Dos and database school (Exlog/ Cairo / 5 / 90)
* Unit superintendent school (Exlog / Cairo / 11 / 90)
* Sco - Unix School (Exlog / Cairo / 10 / 93)
* Total quality advantage course (TQA) (Exlog / Cairo / 06 / 96)
* Applied drilling technology (ADT) Pressure Engineer (Sperry-Sun/Dubai 05 / 01)
Major Responsibilities:
* Supervise, QC and witness well logging operations and personnel to ensure high data quality is recorded in accordance to the drilling program,
* Pick casing and coring points in consultation with the drilling supervisor and Shell office to ensure integrity of casing shoes and full recovery of cores over reservoir objectives.
* Maintain detailed stratigraphic correlation with adjacent offset wells to monitor the progress of drilling and pick casing and coring points.
* well site core descriptions and provide a quick look wire line log interpretations,
* Prepare and transmit reports in order to keep the drilling supervisor and Shell office fully updated with drilling progress and provide a permanent record of drilling activities,
* Perform any operations geology function as and when requested by the Company
During my period as a well site geologist I liaise with the customer on a daily basis, setting new trajectory based on LWD LOGS, I have also participated in many geosteering wells keeping the well in a good reservoir
CARRIER DEVELOPMENT:
- Assistant logger for 12 weeks.
- Third man for 4 months.
- Second man for 28 months.
- Unit captain for 36 months.
- Well site geologist (Shell Oman, till present)
- The companies working for:
* Elf Aquitaine Syria (1990) Syria (Deir El Zor)
* Marathon - Egypt (1990) Egypt (Gulf of Suiz)
* Gupco (Amoco - Egypt) (1990) Egypt (Gulf of Suiz)
* Elf Aquitaine Oman (1990 / 1992) Oman (Sahmah field)
* Petrobel - Egypt (1992 / 1993) Egypt (Gulf of Suiz)
* Canidian Occidental (1992 / 1993) Yemen (Aden)
* Vepa Oil Operation (1993) Libya (Tripoli)
* Zuitina oil company (1993) Libya (Tripoli)
* Pdo (Shell / Oman) (1993 / Till Present) all over Oman.
* Petrogas oil company (2004) (Sahmah field)
Valid passport, driving license, H2s passport and Oman residences. Public relation, work under pressure, communication skills, working in harsh environment and public speaking.
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 7001 to 7050 of 15497)
Go to Search Parameters...
Brief Description
Tubular running services technician
Registered Electronics and Communications Engineer of the Philippines with 7-years experience in Petrochemical and Oleochemical Industry
Over 16 years experience in 2D and 3D seismic acquisition and processing projects: Currently at Kelman Technologies International Tripoli Processing Centre, involved in both 2D and 3D testing. In addition, doing the user support at KTI Tripoli and in charge of the system admin Sun and Linux
Instrument ( Pre-Commissioning & Commissioning ), Maintenanance, Supervising, Technician
I am a qualified Instrumentation Diploma Engineer and having 10 years of well experience in instrumentation field of Maintenance, Commissioning, Installation and Shutdown activities in oil and gas well heads, petroleum refinery, petrochemical and power plant industries.
Experienced Mudlogging Geologist
A highly skilled Well Site Geologist over 15+ years experience for shell Oman include 11 years with Baker Hughes Inteq, worked mostly in (vertical, deviated and horizontal) deep high pressure and temperature gas wells (include the deepest gas well in North Oman 6235 m), some exploration and develo
Maintance foreman cheif electrician certified electrician high med. low voltage certified mineforeman emt-m
I am currently employed as a Dimensional Control Surveyor. Since I starting, I have been involved in several different projects both in the North Sea and abroad. My duties through out these jobs have included, 3D CAD modeling and ISO production.
MBA (EnvironmentalManagement)
Senior PDMS Piping Designer
Piping design & Stress Analysis
Basic erection , maintenence , and installation and overview of performance and specific energy report generator and adjustment woth wind energy units with electricity board and a guy willing to achieve innovate in wind turbine generators
Material man managment, purchasing and requesting, inventories, receipt and return process
Graduate With @.5 Yrs of Sales Experience
Electrical design engineer, lighting designer, single line diagram, fire alarm systems, cctv, site engineer, mep coordinator
Senior technician in the field of chemical analysies and i have a 6 years of experience in oil and gas .
Senior mining engineer-Have 3 years and half experience in coal & metal mines. Have worked in Australian coal mines. Have knowledge of mine planning, scheduling, haul road simulation, mining production
Chemical engineering with three years multinational experience as mud engineer
Estimator in Interior Fit Out/ Buidling Construction
I have an experience in safety field and have done diploma in in this field from dubai from mirdif institutions OSHA occupational safety and health administration.and have had intrested in this field
Resident technical officer
Have several years of offshore experience in oil and gas operations. Responsible for hookups, start-ups, overseeing construction crew, MMS audits and special projects. Experience in trouble shooting problems dealing with production equipment, pneumatics/electrical panels and gas compressors.
Wth 3 yrs of experience in HVAC and completed B.Tech.
Iam a diesel fitter looking for work asap and have a strom mining and civil background
PLC HMI Programmer
A Site Area Manager presently on an overseas assignment with over 25 years of experience, a broad background in site construction, project management and contract administration. Highly developed people skills, interfacing with vendors, clients, owners and virtually all project stake-holders.
22 years of diverse experience in the Oil and Gas Industry in support and professional positions
Project Planner for Ship building related activities.
Working as piping engg B.E. mechnical Diploma in pipiing engg
My skills are workin safely hard and long hours in the oil and gas ind
Completed bachelor of engineering in electrical and electronics from V.T.U,Belgaum.India.presently working as installation testing and commisioning engineer for ADWEAs DMS project with siemens ag from 25-02-07.before i was worked as a operation and maintenance engr for 110substain for K.S.E.B.
1+ years of experience in Ideas NX as a design Engineer
An experienced pipefitter, spent at least 10 years in the pipefitting trade. Have worked in Marine, Petro/ chemical and commercial sectors. Served and completed a 4 year pipeworkers apprenticeship and obtained various qualifications and experience. City and guilds, Canadian Red Seal, B-Tech and NVQ
I am a graphic designer with 8 years experience. Also 10 years working with Flightcheck and file preparation.
Subject : Applying for the Land Surveyor post
Im looking for a job in the environmental health and safety field
10 years work experience of instrument & control system engineer. Professional competence of engineering, design & commissioning. Skilled in INtools, Micrsoft, Microstation CAD, PDS etc. Good English & Chinese. Few Spanish. Excellent team-work spirit.
4 years experience in abstracting for oil and gas rights
Safety Officer, Mechenical / Electrical, 10 years exp
I recently qualified as an architect from Robert Gordon University, and am keen to join your highly reputed and internationally successful organization. It has always been my interest to be a member of a highly motivated team engaged in the design processes of medium to large scale projects.
A Highly self-motivated and goal-oriented Equipment Engineer , Enjoy working with the team and offer more than 4-years track of record demonstrating strong analytical and problem solving skills, computer and autoCAD drafting proficiency, and the ability to handled work under pressure.
Aspen Plus, PRO II, HYSYS,Reviewing PFD,P&ID,Equipment Specifications
Autocad operator (HVAC)
Petrochemical engineer looking for a job in oil/ gas sectors
A motivated and adaptable graduate pipeline engineer, qualified at MSc level, keen to take on the diverse challenges and rewards of working in the oil & gas industry.
I have extensive knowledge of all operations of the saw mill
I have passed MSc in Geology from Nepal and Professional Master Degree in Geological Engineering from the Netherlands in 2003. I have about 10 years work experience. My experience is especially on core drilling and tunnel excavation. A present, I have been looking for a job in Australia.
Free!
field engineer possess floor and field experience in heavy gas turbine engines such as General Electric different model (GE Frame 5, 6, 7 and 9), Rolls Royce, Siemens and Mitsubishi.
I want to improve my skill and knowledge, get good experiences about exploration and production,Drilling Prosses (Over Balance and Underbalance Drilling System), surface production facility and processing plant including Sulfure recovery unit (SRU),Back pressure Valve for safety Rig Drilling and wor
First
Prev
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
[ 141 ]
142
143
144
145
146
147
148
149
150
Next
Last
Seach Parameters
Goto Advanced Search...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com