Resume - I am a qualified Metallurgist and in addition to I have extensive Metallurgical ...

Misco Jobs

Resume #416

CONTACT INFORMATION:
View contact information...

Tertiary Education: National and National Higher Diploma in Extractive Metallurgy(1988) obtained from Witwatersrand Technicon South Africa

Employment History:
1. Intermet (July 2008-Dec 2008)
Designing processing plants.
Commissioning.
Projects:Conducted a pre-feasibility study for the Tin recovery for a project in South America.

2. Bateman Engineering (March 2003-June 2008)
Assisted in the design of DMS Processing plants Conducted Metallurgical Plant.
Plant Audits for Coal, Heavy minerals and Diamonds and used the experience gained to expand this capability.
Lead process engineer for a Crusher Replacement Project.
Process engineer for a Jwaneng project, conducted trade -off studies that consisted of the Recovery methods of Fine and extra Large Diamonds and also removal of Waste.
Other duties:
Identifying new market opportunities such as developing modular gold plant opportunities, spiral plants, small modular jig plant and coal plants.
Identifying new process technology opportunities.
Worked on the Itomak centrifugal gravity concentrator for the recovery of fine gold.

3. SDM Diamond Mine (2000-Feb 2003)
My duties and responsibilities included the operation and control of Washing Plant, Diamond pans and the DMS Plants. I assisted in the commissioning of the new DMS Plant. I was also responsible for improving Quality Control Standards, drawing up partition curves and developing methods to reduce Ferrosilicone losses.

4. ITM DIamond Mine (1998-2000)
I held the position of Chief Sorter. I had a staff of 6 reporting to me. My responsibilities included the total recovery process, from the pre-concentration phase to the final exports. I was intimately involved with processes such as DMS Plants, Washing Plants and the dredging facilities.

5. Brake Master CC (1995-1997)
I was Managing Director of a small motor repair business.

6. Samrec(Pty) Ltd (1994)
I was the Metallurgical Plant Manager. The mine had a Washing Plantand a DMS Plant with the final recovery phase being Permanent Roll Magnetic Separation. I was responsible for production, bagging, dispatching of local sales and Metallurgical Plant Control and had a staff of 64 reporting to me. I implemented a disciplinary code, a Recognition agreement, Personnel policies and Training schedules. Other duties also included negotiating with suppliers, Budget and Personnel control.

7. HMB Brake and Clutch CC (1991-1993)
I was a shareholder and partner in a family business.

8. Johannesburg Consolidated Investments (1987-1991)
I was a Senior Metallurgist and worked extensively in the Ore Dressing Department of the Research Laboratories where I was responsible for a range of tests including Analytical and instrumental work. I was also involved in a project to treat underground mine effluent waters including processes ion-exchange resins, low and high pressure reverse osmosis and ultra filtration.

9. De Beers Consolidated Mine (1981-1987)
I was a student and Plant Metallurgist. I was involved in the Plants, acted as Plant Foreman and rewrote the training manuals for the HMS Plants.

References will be provided on request.

Personal Strengths: Aptitude for figures
Sound supervisory and organizational skills
Leadership abilities
Practical skills
Innovative thinker

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 15509)

Go to Search Parameters...

Brief Description

I have got above 20 years of experience in mining field including 13 year oversas exposure, vell experienced in quarrying and control blasting operation, good with safety, management, record maintainence, billing, coordnation with clints. etc...

Long skills for work-over & completion well site supervisor , coiled tubing & snubbing too

Electrical / instrument designer

PDS and Smart Plant, Auto Plant(3D), Microstation, AutoCAD, MS Excel, Word etc.

Experienced Well site & Ops Geologist. Adaptable, strong inter-personal & communication skills, multi-disciplinary team worker. Follow up Operations Geology activity for Operated & Non-Operated assets, supporting Drilling & Completion. Can work independently with minimal supervision. B.Sc, Geology

Industrial Eng. with master degree in HSE. Title obtained: HSE eng. Specialist

Extensive open pit mining experience in most diverse and difficult cultures, in Africa , Central Asia ,India , hands- on project construction experience at a 40 Million USD Dephosphorisation Plant ,Acquisition of Mining properties in West Africa

Financial Accounting, Costing, Budgeting and Project Accounts

An experienced construction planner and P3, P6 user. He has both design and site experience. His strength is in planning, construction sequence, resource optimization and cost application. He has been working in Singapore for more than 17y.

*Twenty-seven (27) years of experience, have been working in MIDDLE EAST, EUROPE and in Far East Asia. Highly professional with strong communication and leadership skills. Well organized with flexibility and common sense. Computer literate in WIN 95/98,Office 2000,MS XP and Internet task.

Positions - Project Manager, Project Control Manager, Planning Manager and Director in the area of process simulation, predictive control and risk. Hands on, onshore plants (oil, gas), aluminum, ammonium nitrate, offsite and utilities, offshore platforms and pipelines. Capex from $100M to $5Billion

A production/well completion engineer with over 20 years experience in Canada and overseas

Drilling Financial Controller responsible for all drilling expenditures

15 plus years of Rig and Merchant Naval experience with good administrative and communication skills as a Radio Officer/Purser/Fleet Administrative Officer on board foreign going vessels and rig. Have good experience in handling chopper program, boat program, material movements, crew changes, crew t

Responsible for entire Process monitoring, Trouble Shooting/ Rectification or modification for optimum Production in each section.

I have Very good Experience in the Petrophysical Operation, Studies and Well reservoir Survillance. Have experience in QC/QA of integrated studies. Have leadership experience

30 YEARS OF INTERNATIONAL PROJECT MANAGEMENT EXPERIENCE

Geoscientist

Honor degree in Mechanical Engineering form UK and have gained more than twenty five years experience in the fields of major sub-sea assets management, assets integrity, offshore operations, projects and contracts management, inspection, maintenance and marine related projects.

Marine Pilot/ Mooring Master/ Loading Master

Sr. Technical Writer with Software, O&G expeience, PMP Cert

Materials Controller/Warehouse Supervisor/Logistics Supervisor

Multi skilled engineer, Technical Advisor, Mud Engineer

Over 19 years experiences in construction of storage tanks starting from pre contract stage to execution including cost estimation, manpower and equipments planning, scheduling, material procur2ement, customer and engineering general correspondence, progress calculation , progress tracking, and i

15 years Mechanical Engineer within Oil / Gas & refinery industry, inclusive 5 years maintenance experience; 5 years for nuclear power project; P.Eng of APEGGA, Canada

Can perform both technical work and sales work involving oil/gas industry more specifically as an advisor, planner, support or salesperson.

Have a wide range 4yrs experience as Safety Engineer in a construction firm. I develop and implement safety programs to minimize losses due to injuries and property damage hey try to eliminate unsafe practices and conditions in industrial plants, mines, and stores as well as on const

Drilling Engineer – DCWO planning, programming, engineering, operations evaluation, performance analysis; deep HPHT gas wells, high deviated, ERD and horizontal oil wells, sidetrack wells; land operations; harsh desert (Middle Asia) and arctic (Siberia) environment; English-Russian-Slovak

Over thirty years of experience in major US and International design/build facilities programs where responsibilities have included senior-level Project Management, Construction Management, Engineering and Design Management, equipment selection, installation and start-up. P&L responsibility for all

In search for the position where my background would be valuable, your esteemed organization came to my attention as one that might find my experience of interest. The enclosed professional profile will provide you with information concerning my overall education and capabilities for your review.

I have over 28 years of experience in the field of Electro- Mechanical Engineering of which 6 years in Middle East and 7 years in Nigeria with European MEP Contracting Company. My responsibilities include Pre Tender estimation, Estimation of manpower and material for the projects, supervise and impl

Senior Mechanical Engineer experienced in detailed mechanical / thermal / process and E&I design of Fired Heaters, Reaction Furnaces, Reformers, SCR’s WHRU’s, Boilers, Incinerators, Flares and associated ancillary equipment. Very strong E&I, DCS / PLC & BMS skills.

By working 17 years in the field of petrochemical field, I experienced all kinds of key projects like FCCU, Hydro-cracking unit, Hydro-treating unit and have expert ability to do piping static and dynamic stress analysis. Also I have five years working experience as a mechanical engineer in refinery

35 years of experience in the process industry working for engineering firms, equipment manufacturers, chemical company

Proven track record in project management in oil refinery handling bid projects with multinational contractor, excellent team leader with motivation schele

I am proficient in researching title and court records, including but not limited to conveyances, mortgages and other indexes, along with curing said title when needed. I am able to determine from said title or records mineral and/or surface ownership in Louisiana, Mississippi, Alabama and Texas.

Conducting a piping training program from zero skill up to a skill trainees supervising the assigned work from planning, organizing, leading and controlling. Performed piping work activities from designing and drawing the piping tie-in to existing pipelines, drawing various structural platform

Twenty years of professional experience in, design, consultancy, construction and maintenance, covering a broad range.

25 years of experience in construction, installation, commissioning, testing and maintenance of Electrical, Electronics and Instrumentation equipments and controls in Petrochemical Industry

Graduate Mining Engineer having vast experience in mining operation, Drilling & Blasting and Marketing / export of explosives.

Have more than 20 years experience in Piping Design and Engineering including Stress Analysis and Piping Materials Control for various projects in petrochemical plants, refineries and commercial chemical plants. Presently working in Worley Parsons (Colt Engineering Corporation), Calgary, Canada

A challenging position in a result-oriented company that seeks an ambitious Person, where acquire professional skills and devotion towards safety on priority, sharing of knowledge as a learning point and grow with the company in allocated budget and high safety/quality services to the client.

A result-oriented and talented professional with an extensive experience 26 years in the oil & gas industry . Expertise in commissioning, DCS control room operations, oil refining processing , crude oil & gas processing, oil & gas operational environment.

PMS-Planned Maintenance and Spares & Purchase Database administrator and building.

Underground: Project Engineer (evaluation, design, development & production; metals mining), Senior Engineer or Technical Services Supervisor

Rig Manager/ Drilling Superintendent/ Drilling Supervisor.

Canadian, B.Sc. geology, 28 years experience in mineral exploration, evaluation, development, production and administration, particularly in gold. Lived and worked in Canada, Saudi Arabia, Botswana, Russia, Iran and assignments in Kazakhstan and Uzbekistan. Computer literate.

I am a qualified Metallurgist and in addition to I have extensive Metallurgical experience in the Diamond, Base metals and Andalusite fields. I am an innovative and enthusiastic person. I have been involved as Senior Process Engineer, Plant Design Engineer, Chief Diamond Sorter and Plant Manager.

Over 18 years experience in 2D and 3D seismic data processing. Processing land desert and mountain data. Processing experience gained in Geofizyka Krakow Ltd, WesternGeco and CGGVeritas. User knowledge of Unix, Linux , excellent Omega SPS and Tango, basic ProMAX. Good MS Office skills.

Exploration ,Mining

First 1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out