Resume - 27 years industrial minerals experience in open pit mining and mineral processin...

Misco Jobs

Resume #42526

CONTACT INFORMATION:
View contact information...

EXPERIENCE
1989–Present Unimin Corporation Spruce Pine, NC

Plant Superintendent 1996-Present
Position reports to the Plant Manager. Guided the day-to-day operation of continuous operation high purity quartz mineral processing facilities. 6 years in a union plant and 5 years in a non-union plant. 4 direct staff reports and 48 hourly employees. Responsibilities included all reporting functions for production, shipping, product quality, cost control and analysis, workforce hiring and discipline and capital improvements. Worked closely with 2 mines to assure the highest quality plant feed. Use management by objective, continuous improvement and work team philosophies.
Achieved record quartz production in 2004 and by-product sales in 2005.
Increased drying productivity 35% while reducing cost by 12%.
Earned State and National safety awards for excellence in the workplace; no lost time accidents with low incident rates.
Worked as a member of an engineering team to construct, commission and staff a new quartz processing plant.

Mine Engineer 1992-1996
Established drill hole quality control sampling program in 2 mines to ensure quality quartz ore feed to the mineral processing plants.
Increased mine ore and waste production by 15% annually.
Managed daily mine operations.* Designed and completed ore reserve drilling programs. Modeled reserves and created short term and 5-year mine plans.

Senior Geologist 1989-1992
Designed and completed drilling programs to prove high purity quartz and silica sand reserves at several mine/plant complexes in North Carolina and Illinois.
Monitored daily quartz mining operations to ensure the highest quality ore feed to the mineral processing plants.

1982–1989 FMC Lithium Division Gastonia, NC
Mine Geologist 1986-1989
Pit Geologist 1985-1986
Exploration Geologist 1982-1985
Established a drill hole quality control sampling program in the mine.
Completed core drilling, deposit modeling and reserve determination.
Performed daily drill pattern layout and surveying.

1980–1983 GRC Exploration Company Nashville, NC
Project Geologist
Completed regional geologic mapping, soil sampling and core drilling programs for lithium and precious/base metals in North Carolina and Missouri.

EDUCATION
1983 North Carolina State University Raleigh, NC
MS Geology (Igneous/Metamorphic Petrology, Structural Geology)

1976 University of Wisconsin – Parkside Kenosha, WI
BS Earth Science

SKILLS
North Carolina Licensed Professional Geologist #945
PC Proficient (Microsoft Office Suite); Techbase Mine Software.
Mine Surveying
Excellent Interpersonal and Communication Skills

INTERESTS
Mitchell-Yancey Habitat For Humanity President
Mitchell County United Way President
Mitchell County Chamber of Commerce Board
Teaching Rocks and Minerals to All Grade Levels
Woodworking
Bicycling & Hiking

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 15507)

Go to Search Parameters...

Brief Description

Having 15 years of experience as as Design Draughtsman / Autocad Engineer in Oil & Gas, Petrochemical & Manufacturing industries.

QA/QC Manager Welding Engineer Offshore and Onshore

Drilling Excelence Manager for BP Trinidad & Tobago. 10 Years experience in BP as DE/SDE/Org. Capability Manager & Drilling Excellence Manager. 9 Years in Service Company with experience as De/project Manager/Proposal Manager & QHSE Manager.

Sr Instrument Engineer with over 15 years experience in the design and specifications of instrumentation for petrochemical plants, and 2 years for offshore platforms

Structural/Geotechnical Engineering jobs such as Pile design, Retaining wall design and project management

Project/Engineering Manager, 24 yrs Experience in Oil & Gas (Indian Oil Corporation Ltd.) for Development of Terminals & Gas Stations. Projects involve conceptualizing, engineering, budgeting, estimation, tendering, procurement, fabrication, installation, testing, pre-commissioning and commissioning

Piping stress analysis, finite element analysis using ANSYS, Mechanical design, etc.

Experienced Country Manager, skilled in change and open to multicultural environment.

Design skills in steel and concrete of petro chem and power plants.

Production Engineer resume

Hands on site experience in infrastructure works (roadworks ) and buildings works with total 19 + years experiences ( supervision and project management)

Maintenance Electrician

I working for Schlumberger Achievement as Crew Chief Wireline Operator. I perform jobs in location. Working in a Team is one of my compliances, most jobs in Cased Hole and Open Hole, and report to Field Engineer

Coatings & Corrosion Engineer "NACE"

I am 44years old and right now I am still working at PT Pec-Tech Indonesia (RGMI Group), current position as “Senior Process Engineer”. Business line of this company is Engineering/EPC As you can see from my enclosed curriculum vitae; I have long and wide experiences (± 19 years) in Operation Pro

Senior Environmental Engineer/Manager, Multimedia, heavy industry, permitting, compliance, ISO14001

Licensed professional engineer with over twenty-seven years of structural design and deliverables production experience for Industrial, Commercial, Residential, Oil and Gas, and Transportation projects

Upstream and mid-stream experience(27 years) plus underground waste water injection

earned master of science at the University of Oklahoma in the subject of rock mechanics. He has been a professor of production, drilling, completion and stimulation for more than 14 years, and he had earned more than 12 years of field experience.

I am experienced Metallurgical Engineer with unique experience in a broad range of metals/gasars/alloys/composites processing, including alloying, casting, melting, heat treatments, microstructure design. Able to work in quality control, research and development facilities.

I am experienced in reservoir simulation and numerical modelling, foamy heavy oil flow, well testing analysis, production forecast, horizontal and multilateral wells, thermal recovery, water flooding, PVT sampling and analysis.

I have a PhD in Logistics Management and over 20 years work experience in shipping, logistics, supply chain management, airfreight, sea freight, container marketing & operations, port development & expansion, ship and air chartering, project cargo handling, freight forwarding, etc.

Skilled, knowledgeable, and experienced in organizational assessment, strategic planning, business process reengineering, organization design, and change management in oil and gas related operations including production SBU's, upstream and downstream R&D, MIS, and Finance

I have outstanding experience in the design of high-pressure gas transmission line and its associated facilities in valve stations and also a fuel gas supply line plus governor station to 1800 MW combined cycle power plant in South Korea.

Attached herewith is my current RESUME. I would like to be considered for a suitable position in the fields of Applied and Analytical Chemistry, Chemical Process Design and Development, Environmental Engineering, and/or Project Management.

An experienced industrial minerals processor with vast knowledge of kaolin and talc processing. Work experience include 10 years in R&D (process and new product development) and 10 years in academia. Looking for the right opportunity outside the USA and Canada.

A Procurement/Logistics/Admin Manager of 25 years experience in the O & G industry particularly with FPSO's. Has contracted in Thailand/Singapore/Malaysia/Nigeria/Libya/UAE/Qatar/Scandinavia/Europe.

 Over 21 years of experience in the Petroleum exploration Industry.  Have broad experience in the area of drilling and completion fluid design and formulation in on shore as well as off shore wells.

Senior reservoir engineer: 30+ yrs experience in N. America, S. America, and Europe. Denver-based. Available for contract work, long-term or short-term. Fluent in English and Spanish.

Drilling Specialist for 35 years. Postings have included Worldwide Drilling Manager, In-Country Drilling manager, Drilling Engineer, On-Site Drilling Supervisor and Drilling Consultant. Skilled in foreign start-up operations and training of Nationals.

A versatile and Innovative Chartered Accountant of Nine Years post Qualification experience and Eighteen years on the Job Practical Experience

Over 22 years’ professional experience in Conceptual, FEED, Detailed engineering and project management in Oil & Gas, Refinery, Petrochemical and Chemical projects.

27 years industrial minerals experience in open pit mining and mineral processing management. MS Geology, excellent communication skills, team player and leader. Excellent safety record.

Over 12 years (over 4 Years in Gulf Countries) in pre-commissioning and commissioning, start up, daily plant operation and shutdown activities for large oil and gas, refinery and petrochemical plants.

Project Engineer with Australian education, canadian experience and with very good project management skills.

Pipeline, Facilities and Project Engineer.

12 years experience in Warehousing and Logistics operations from in-bound to out-bound w/ purchasing function

More than 18 years of design experience in oil and gas production, gas processing, LNG Production, and projects of refinery, petrochemical and chemical industries. Specific experience in front end and detail engineering, process engineering/flow schemes development, process data sheet preparations

Good working experience on Instrument and control system

Senior Mechanical Piping / Stress / Equipment Engineer BS in Mechancial Engineering USA National

8yrs of working experience in the field of HVAC & Duct Manufacturing. M.S. from KFUPM. B.E. (Mechanical). Areas of Interest Heating, Ventilation and Air-Conditioning. Indoor Air Quality. Facilities Management (Inventory, Space, Maintenance,

QA/QC Enginner

PMO, Planning, Project manager, Program Director

Reliability, Maintenance, Planning and Material Engineer- Mechanical

More than 15+ years experience in process operation

I have 17 years of Planning experiences within oil and gas, petrochemical, mining, power plant and industrial plant construction. I am also an advance user of P3/P5/P6.

Telecom field technicians Customer end

B.E. with 22 years of experience in Highways, Industrial and Building construction, out of which 3 years in Saudi Arabia. The experience includes-

Procurement, Contracting, Logistics and Inventory management

Principal Engineer with 20 years Umbilical, Flowline and Riser Experience Design, development and installation of flexible Flowlines, risers, umbilical and oil offloading lines and associated ancillaries. Including dynamic, structural and on bottom analysis.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out