Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #42750 next resume »»
CONTACT INFORMATION:
View contact information...

PERSONAL:
A reliable and adaptable individual, who works well with others or on his own. An effective communicator, who can carry out given tasks efficiently and accurately. Can pick up new skills quickly and easily, and has a keen desire to succeed.

EMPLOYMENT
Feb. '05 to present:
Heavy duty diesel engine mechanic, responsible for the maintenance and repair of all camp generators, and tuition of local nationals in procedures for same.

2001- 2004 Eccosse Diesels
Employed as marine engineer on a sub contractor basis, working in the luxury yacht sector and leisure craft industry.

1998- 2001 Marine Diesel Services
Working on a self employed basis in Grangemouth docks servicing and repairing tug boats and fishing vessels.

1986-1998 Franchised Tool Salesman
Self employed franchised tool salesman, selling garage tools and equipment to the motor trade.

1980-1986 Service Engineer
Working with Aveling Barford on the range of earthmoving equipment produced by the company. The equipment covered dump trucks from 17 to 50 tons, wheeled shovel loaders, graders, and a range of road rollers from 30 cwt. to 10 tons. As an international company, overseas visits were a part of the work load, and involved contracts to, Jordan, Egypt, Sudan, Tanzania, Zambia, Oman, Iraq, and India, to install new equipment and maintain existing equipment.

1978-1980 Transmission Technician
Working with Blackwood Hodge initially inspecting new equipment as manufactured by Terex. Promoted to transmission section for training on servicing, repair, rectification, and overhaul procedures on all transmission units as fitted to the range of equipment.

1976-1978 Service Engineer
Working with T.W. Ward as a mobile service engineer servicing and repairing a wide range of plant and hydraulic excavating equipment.

1969-1976 Marine Engineer
Joined British Merchant Fleet as junior engineer and was gradually promoted to third engineer. Duties included watch keeping on main engines and generators, and all auxilliary equipment simultaneously. 18 months of service on an oil drilling and exploration vessel.

1964-1969 Apprentice Diesel Mechanic
Taggarts B.L.M.C. Dealership. Trained in all aspects of the repair and maintenanance of commercial vehicles.

Further Training. Gained the city and guilds certificate in automotive engineering.

Mitchell Diesel Ltd. Completed course of instruction on Detroit Diesel V71 series engines tune up and preventive maintenance.

Cummins Diesel Ltd. Completed course of instruction on maintenance and service of "N" series engines.

INTERESTS AND ACTIVITIES
Cycling, motor sports, natural history and animal welfare.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 8151 to 8200 of 15341)Go to Search Parameters...
Brief Description
Mechanical engineer and a well engineer
Offshore Drilling Materials and Logistics Supervisor. with experience of 4 + years.... looking for better opertunity
Competent Mechanical Engineer currently working with ACC Ltd. HOLCIM INDIA
In oilpatch for 7 years
10 years drilling experience
Process Engineer’ holding a capacity of Shift Incharge/Supervisor in Power Plant (Co-Generation), Offsite & Utilities operations at TATA CHEMICALS LIMITED (Urea Fertilizer Complex) Babrala (Budaun), Uttar Pradesh, INDIA
I am an extreamly hard working husband and father of two young children. I am looking for a company that I can start from the bottom and work my way up. Obviously I am not afraid to roll up my sleeves and jump right in!
4-years BSc. Mining Engineering, 1-year working experience in both Surface and Underground Mining Operations, basic knowlege in Surpac, Talpac, XPAC and Whittle mining softwares
10 years of experience oil&gas upstream and downstream
Exp. driller, toolpusher, and directional driller with flex and joystick exp
Diploma of Associate Engineer in Chemical Technology in 2001.
Electrical Engineer with strong hands on soft skills like Auto CAD and experince in hand
Catering manager/site administrator seeks job
I have done the project for International Power name "Feasibility of Electrical Energy Saving at HUB POWER station. and I can design different kinds s controlling circuits by using microcontroller,PLC and VFD.
Heavy equipment operator with experienced in ARAMCO, Saudi Arabia
Experienced Overseas Work. Past Projects in Algeria, Chad, Iraq now in Kosovo
A position of significant responsibility that builds upon extensive experience in construction management, expertise in managerial skills and cost analysis. Ultimate goal is to grow within and with the progressive organization that provides excellent career advancement opportunity
5 year appreniceship as diesel mechanic. 5 years experience as engineer in British Merchant Navy .Conversant with Caterpillar, Terex, and Aveling Barford earthmoving equipment , various supervisory positions worldwide in different disiplines
CWI(AWS) plus ASNT Level II
PhD in enironment engineering
Respected sir, I am NCVT 3 year technical exam passed in plant operation & minor maintenance. Presently I am working in Reliance Refinery Jamnagar, India, in FCC complex and taking charge in propylene recovery unit and shp-tame unit.
10 years Process Engineering Experience in Oil & Gas and Petrochemical industries. Working for Established Company. Familiar with international code and standard e.g API, ASME, etc as well as COMPANY general practices e.g SHELL DEP, EXXONMOBIL DIM, PETRONAS PTS, etc.
Mechanical Engineering Graduate having ten years experience in the fields of petrochemical plant turnaround planning & scheduling and EPC projects engineering.
Bachelors of Mechanical Engineering (89%, A+) (2003-2007)
I AM A LAND SURVEYOR WITH CERTIFICATE QUALIFICATION.I HAVE 8 YEARS WORKING EXPERIANCES AS A LAND SURVEYOR IN CONSTRUCTION AND TITLE WORK IN MALAYSIA AND OVERSEA.
B.E In Electronics and Instrumentation.Having exp in maintenance (Inst & contorl) of power plant & in project commissioning activities of burner contorl systems
Repair & maintenance of plant & equipments used in construction, knowledge in overhauling of engines used in construction equipment, maintaining & preparing all technical reports related to plant
BE (Electronics & Instrumentation) with 2 years 4 months of total experience in Testing & Development , Design, Commissioning of ABB 800xA DCS and CIMPLICITY SCADA and Execution as a Consulting Application Engineer
journeyman lineman service, const, underground cdl cpr overhead switching
I am a university-educated Canadian Registered Safety Professional with over 15 years of Environment, Health and Safety experience. This experience has included the development and implementation of EHS management systems, training programs, risk assessments and emergency response plans.
I have worked and performed 2 (two) years as HSE (Health Safety & Environment) in construction which one year in oil & gas project (pipeline and gas plant) and one year in civil package, erection in reconstruction cement plant project.
Driller's Helper
Currently a graduate from Texas Tech University with a degree in Energy Commerce with a emphasis in Petroleum Land Management, and looking for a fulltime job in the oil and gas industry.
Bachelor of Economic
A talented land Surveyor who is able to deliver services in Cartography, photogrammetry, cadastral, mining and Geomatics work.
I am applying as chemical engineer
Diploma in Land Surveying and have vast experience in engineering, cadastral, topographical and mine survey. I have experince using Leica instruments such as GPS System 1200 and TCR407, TC1610 total stations.Currently working as a contract surveyor at the Unki Mine Project (Anglo Platinum)
I have Bachelor Degree in Electrical/Electronic Engineering From University of Benin, Nigeria. I Graduated with a Second Class upper division(4.49). I also have National Diploma in the same field. I have two years Experience in Repair, maintanance and servicing of industrial machine.
Sales & Marketing - Valve specialist
B.S. - Mining Engineering. 20+ years experience as a mining engineer and staff supervisor in open cut copper mining utilizing earth-moving, drilling, blasting, drainage maintenance, and dewatering equipment. Also have several years experience with open-cut coal mining. Willing to relocate.
petroleum engineer, programming, Aries, fortran, acidizing
Over twenty-five years experience in Project/Construction Management in an Engineering Procurement and Construction Management environment, specializing in Project Controls, Planning and Scheduling. Project Controls background includes EP, EPC and EPCM.
Experienced in design and testing of oil & gas equip. including casedhole well completion equip., surface and subsea wellhead & production equip. designed to API 6A and other industry standards, artificial lift systems coupled with exposure to oil country tubular product
Diploma in Mechanical/materials management with 17 Years expereice in Material Controlling and Piping looking for employment with reputed organisations.
Dedicated Land Professional with 29 years experience in a "Cradle to Grave" land department who works well under pressure and a deadline
reservoir engineering petroleum engineering reservoir modeling simulation production profiles
Familiar in process control operation with Honeywell TDC-300DCS and Fox Pro. System.Can operate all plant auxillaries and utilities.Can do mechhanical trobleshooting/repair of all plant equipments.
Mastery in the use of Synthetic & various kinds of water based muds which I have worked with and used in various projects for the last Seven years. Mastery in the use of Fluids Reporting and Engineering systems.
QAQC Co-Ordinator
I am searching for offshore employment as a crane operator. My specialty is the Tower Crane. I have operated many types of cranes up to 250 ton.
First   Prev   151   152   153   154   155   156   157   158   159   160   161   162   163   [ 164 ]   165   166   167   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   189   190   191   192   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com