Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #4303 next resume »»
CONTACT INFORMATION:
View contact information...

EMPLOYMENT OBJECTIVE: Environmental Engineer

EDUCATION
Ph.D., The Pennsylvania State University, May 2002, Geo-Environmental Engineering. Hydrothermal Transformation and Dissolution Kinetics of Hydroceramic Waste Forms for the Idaho National Engineering and Environmental Laboratory (INEEL) Calcined High-Level Nuclear Waste.

M.S., The Pennsylvania State University, May 2002, Materials with Engineering Option. Spectroscopic Studies of ZnO.

M.S., The State University of New York (SUNY) at Stony Brook, May 1994, Hydrogeology. Hydraulic Conductivity, Porosity and Particle Size Distribution of Core Samples from the Upper Glacial Aquifer: Laboratory Observations.

B.S., The State University of New York (SUNY) at Stony Brook, May 1992, Geology major.

RESEARCH AND TEACHING EXPERIENCE:
1994-present: The Pennsylvania State University
* Postdoctoral Research Fellow. Petroleum and Natural Gas Engineering/Energy Institute, The Pennsylvania State University: Production enhancement and environmental remediation using sonication technology.
* MATLAB for computational, graphical and signal processing Toolbox
* Origin data analysis and graphing software
* Hydrothermal synthesis and characterization of hydroceramic waste forms for calcined and sodium-bearing INEEL high-level nuclear wastes
* Comparison of the Vapor Hydration Tests of hydroceramic waste forms and the Environmental Assessment (EA) benchmark glass to determine their chemical durability (leachability) in an unsaturated zone
* Optimization of gibbsite yield via conventional processing and microwave hydrothermal synthesis
* Microwave and conventional hydrothermal synthesis of layered-anionic (hydrotalcite) clay to be explored as slow-release nitrate fertilizers
* Solid-state synthesis of ZnO phosphors doped with different cations (Ce, Pr, Al, Cu, Mn, Tb, Li, Eu and Ga) at 900oC. Measurement of characteristic emission bands provides the data needed to identify potential candidate materials for low-voltage flat panel display devices.
* Characterization of the luminescence of ZnO powders and single crystal from room temperature to liquid nitrogen temperature
* Experience with characterization techniques: ICP, AAS, XRD, FTIR, TG, GC/MS, Raman, UV-VIS-NIR and diffuse reflectance spectroscopies; surface-area adsorption (BET); SEM; microhardness
* Thermochemical modeling using ChemSage software
* Glass chemistry
* Materials Research Laboratory Graduate/Post doc committee chair
* Research Assistant in various research projects
* Teaching Assistant in Physical Geology, Pollution control in Mining Industry, and Aqueous/Mineral Processing

1988-1994 SUNY at Stony Brook
* Investigation of hydraulic conductivity, porosity and particle size distribution of core samples from the Upper Glacial Aquifer: Laboratory Observations (MS Thesis)
* Research Assistant in Engineering Geology
* Volunteered Teaching Assistant in Engineering Geology
* Analysis of Long Island water shed chemical data with PHREEQ aqueous geochemical modeling program

HONORS AND ACTIVITIES
* Burghardt Turner Fellowship, SUNY, Stony Brook, 1992-1994
* International Student Orientation Leader, SUNY, Stony Brook, 1994
* Minority Fellowship, The Penn State University, 1994-1998

PUBLICATIONS AND CONFERENCE PRESENTATIONS
Darryl. D. Siemer, Johnson Olanrewaju, Barry Scheetz, N. Krishnamurthy and Michael Grutzeck. Development of Hydroceramic Waste Forms. Environmental Issues and Waste Management Technologies in the Ceramic and Nuclear Industries VI (eds.) D. R. Spearing, G. L. Smith and R. L. Putnam. Ceramic Transactions volume 119, p. 383-390, 2001.
Darryl. D. Siemer, Johnson Olanrewaju, Barry Scheetz, N. Krishnamurthy and Michael Grutzeck. Development of Hydroceramic Waste Forms for INEEL Calcined Waste. Environmental Issues and Waste Management Technologies in the Ceramic and Nuclear Industries VI (eds.) D. R. Spearing, G. L. Smith and R. L. Putnam. Ceramic Transactions volume 119, p. 391-398, 2001.
Bharat L. Newalker, Johnson Olanrewaju, and Sridhar Kormarneni. Microwave-hydrothermal synthesis and characterization of zirconium-substituted SBA-15 mesoporous silica. Journal of Physical Chemistry B, vol. 105, 8356-8360, 2001.
Bharat L. Newalker, Johnson Olanrewaju, and Sridhar Kormarneni. Direct synthesis of titanium-substituted mesoporous SBA-15 Molecular sieve under microwave-hydrothermal conditions. Chemistry of Materials, vol. 13, 552-557, 2001.
Olanrewaju Johnson, Newalker, N. J., Mancino, C., and Komarneni, S. Simplified Synthesis of nitrate form of layered double hydroxide: A potential candidate for slow-release fertilizer. Materials Letters, vol. 45, 307-310, 2000.
Olanrewaju Johnson, Scheetz. B. E., Grutzeck, M. W., and Siemer, D. D. Hydroceramic Waste Forms: An alternate to Glass for sodium-bearing waste (SBW). ACS National Conference August 26-30, 2001 Chicago, IL.
Johnson Olanrewaju and Teng-fong Wong. Hydraulic conductivity, porosity, and particle size distribution of the Upper Glacial Aquifer: Laboratory Observations. Long Island Geologist, "Geology of Long Island and Metropolitan New York" p. 73-79, Saturday April 23, 1994.
Olanrewaju Johnson, Scheetz. B. E., Grutzeck, M. W., and Siemer, D. D. Comparison of Vapor Hydration Tests of hydroceramic waste forms and Environmental Assessment (EA) benchmark glass at 200oC (in preparation for Journal of Nuclear Materials).
Olanrewaju Johnson, Scheetz. B. E., Grutzeck, M. W., and Siemer, D. D. Hydration kinetics of hydroceramic waste forms (in preparation for Nuclear Technology Journal).

PROFESSIONAL ASSOCIATIONS
* American Chemical Society
Division of Environmental Chemistry; and
Division of Petroleum Chemistry
* Mineralogical Society of American

View contact information...
«« previous resume next resume »»
Search Results (Resumes 2351 to 2400 of 15341)Go to Search Parameters...
Brief Description
I was in overall command of the vessel and responsible for the operation and safe navigation as per local and international maritime laws, conventions, rules and regulations. Responsibilities -cargo operations as per relevant C/P terms/clauses,Risk Assessment,personnel management.
Over 12 years experience in oil and gas industry
Experienced CSA Designer
As drilling fluids engineer, my experience covers a wide range of mud engineering aspect : to control the running of the mud system on the rig accordance with the operator’s requirements and in a safe manner, to ensure there are sufficent quantities of the correct materials to meet these requirement
Conduct safety meeting before start to work, Supervision, planning of works, review all P & ID, Isometric Drawing, arrange and withdraw all materials involved in the area of assignment, conduct hydro testing and pneumatic testing of lines, conduct pre-commissioning and commissioning activities, work
worked in General Banking and Forex department
I have been working in the field of safety professions for 12 fruitful years in deffirent construction industries such as Oil and Gas, Refinery plant, Petrochemical plant and civil works construction. I got a various training for International safety standards, including OSHA training.
I am a superior technician in chemical Engineering (BTS), having rich and varied experience in the field of Oil and Gas ,Companies as a Control room technician, Senior Process technician (field). Senior Operator (utilities), Plant ,technician (LPG Recovery plant), Process technician & Terminal Techn
Worked in oil and gas projects worldwide as senior project engineer and now as consultant.
A Lead Business Strategic Systems Architect and Analyst with 10+ years of proven expertise in delivering service centric solutions. A logical, analytical, detail oriented team player with excellent management, communicating, negotiating, marketing and facilitating skills.
Project Management in HVAC Mechanical or Building Construction Management. Excellent mechanical aptitude, problem solving, customer relations, contract administration , field experienced hands on Manager
Unlimmited able seaman.,qmed oiler,SD(FH)LBMAN-NON LB EQUIP'D,Master 200 ton GT
13 years experience in oil, gas and petrochemical industrial dealing with installation, inspection, maintenance, troubleshooting and overhauling for rotating as gas turbines, compressors, pumps, gas & diesel engines, air fan cooler and heat exchangers in international companies at Egypt, Saudi Arabi
7 years in refining admin. and 8 years of oil well service
Project planner / scheduler / cost / shutdown / turnaround /Primavera P6.2, P6.1, P6,/Oil, Gas, power, EPCM Project Control
Post Graduate in Geology in 1992 with 13 year experience as a Exploration & Mine Geologist also well versed with Datamine, Surpac & GIS.
Mechanical engineer with fourteen years of international experience in engineering, consulting and construction. Extensive background with plant conceptual studies and detailed engineering in Oil & Gas industry. Expertise in designing of Pressure Vessels, Heat Exchangers, Storage Tanks
PDMS Designer with FPSO & Offshore exprience
I have been working as a mechanical technician for 19 years. I also have welder and fitter skills and a qualification in Engineering.
I have experienced for road/bridge construction project as Site Enginer
Familiar with: -Separation, stabilisation,-Gas compression,- dehydration,-Gas injection.-Storage and shipping-Heater, Gas turbines- Water treatement-DCS-Propane refrigeration loop.
Production Completion Engineer
I am Vasu Jajala working in Shell Nig.Ltd. As a Construction Instrument Supervisor. I have 16 years plus of practical experience in the field of Process/Machine Control Instrument of Offshore & Onshore, Petrochemical, Petroleum refinery, Oil/Gas and QATAR LNG industries.
Warehouse Inventory; Civil Engineering Technician;
A proactive and analytical Mechanical Engineer with over 12 years experience of Working in a Multinational and Multi cultural work environment in fabrication operations, welding processes, project management, quality / process enhancement ,maintenance with highly regarded organizations.
Information Management Consultant for the Oil Field Industry with 10 years of experience
Extensive experience in the operations of oil & gas, refinery and hydrocarbon process
Over 15 years of relevant experience in Mechanical Engineering and management. Over 5 years of technical authorship in Oil & Gas Industry. Extensive knowledge of machinery, equipment and heavy duty vehicles, maintenance and repair strong practical skills and managerial abilities.
sedimentologist with 16 years of experience in siliclastic and carbonate rock:core descripton, petropgraphic analysisand diagenesis interpretation
Canadian citizen, Bilingual, with long experience in project scheduling, cost control. Strong knowledge of the scheduling techniques and related computerized programs such as Primavera Project Manager (P3, P3e and P3e/C), Ms Project and MS Office.
Professional Geologist with over 16 years worldwide experience working for major operating companies in asset management/development teams, exploration and production. Worked on a wide variety of clastic and carbonate reservoirs. Key competences are listed below.
A highly effective Senior Manager, who meets challenges directly, creates positive change and motivates teams to exceed goals. Proven record of success setting strategic direction, creating and executing solid asset management plans, improving operations and increasing profitability.
Looking for an engineering position with the responsibility of structure research and analysis.
Career objective: seeking a challenging managerial position with an established regional or national organization.
Multi-Million Dollar General Construction Project Manager
Over 19 years experience of Executive Secretarial, Administrative and Managerial services of very high professional level, in Saudi Arabia, Sultanate of Oman and India
I am a professional in the commercial area of oil and products related sales and trading. My experience ranges from logistics, operation, planning , negotiation and new business development
See resume body
Sr. Piping Designer - CadWorx/AutoPlant
An ambitious and highly skilled Petroleum engineer with extensive experience in reservoir engineering, well testing, reservoir fluid analysis, ISO certification, production, management, product development and launch, and customer support.
Contracts specialist with Engineering background having more than two decades experience in both Operating and Contracting companies.
I am a 22 years experienced african in the petroleum industry. I have a very good skill in general management and very good in credit and collections
Piping Design Engineer with 15 years of international experiences in the EPCM environment. Performed at a various level in the engineering design to construction site for oil sands projects, refineries, petrochemical, pump station & pipeline, and onshore facilities.
Senior Reservoir Engineer with 15+ years of broad based international experience gained in reservoir simulation, field appraisal, field development planning, reservoir surveillance, reservoir management, wellsite operations and working in integrated multi-disciplinary study teams.
Graduate, Electrical Engineering Degree Holder, Working In Indian Petrocehmicals Corporation, India Since Last 19 Years - As A Senior Technician (Supervisory Post)
Senior process engineer upstream oil and gas design consultancy. Ammonia plant operation manager. Process engineer for chemical petrochemical plants
20 years of experience as a Mechanical Engineer working within the water treatment industry
QA/QC Coating Inspector NACE Certified # 10362
Driller-15 Years Toolpusher-3 Years Oilfield Experience 30 Years
Reservoir Engineer
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   [ 48 ]   49   50   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com