Resume - I have over 15 years of experience in this field and acquired enough knowledge. ...

Misco Jobs

Resume #44270

CONTACT INFORMATION:
View contact information...

QUALIFICATION
Diploma In Instrumentation Engineering
Total Experience 15 Years
Previously working with Abu Dhabi Company for Onshore Oil Operation (ADCO) as Instrument Control Foreman since 1998.

RESPONSIBILITY & NATURE OF WORK
Day-to-day breakdown Maintenance and Trouble- shooting of Field as well as Control Room Instruments.

Carrying out Routine Maintenance of Daily, (Load Dispatch Centre (LDC) Backup Tape & H2S Open Path Gas Monitoring System) Weekly (Oiling of Turbine flow-meter System, LDC RTU's Inspection). Two weekly (Turbine auxiliary Air compressor system, Rolls Roycee Avon Turbine Fire System) Monthly (Thomassen Gas Turbine Fire System, Kvaerner Gas Turbine Fire System, Detronix Diesel Engine Test, <I> Computers and Printers, Solartron Flow Computers, Turbine and Generator Air Inlet Turbine System) and Three Monthly Maintenance (All Substations Fire System)

Carrying out Six monthly Preventive Maintenance Systems of Chubb Fire System and Sieger Gas System of Turbines, Fuel Gas Skid Supply System of Turbines, LDC (SCADA) System of Control Room.

Carrying out of Yearly Preventive Maintenance System of Rolls Roycee Avon Turbine Field as well as Control Room Instruments, Fuel Gas Skid Supply Systems of Turbine, Fuel Gas Knockout Pot Systems of Turbine, Fuel Gas Heaters, Substations Fire system etc.

Three Yearly Maintenance of all Inter-connector and Line Transformers.
Field Instruments Handled
* Level Transmitters – Masoneilan, Fisher, Magnetrol etc.
* Control Valves – Mosoneilan, Fisher Rosemount, Kent etc.
* Smart Series Transmitters (Pressure, Temperature and Flow) – Rosemount, Foxboro, Honeywell etc.
* Pressure Transmitters - Gulton Statham, Dynisco
* Turbine Flow Meters – Danial
* Switches (Pressure, Temperature, Level) – United Electric, Delta, Dwyer, Magnetrol, etc. Custom control sensors etc.
* Level Indicator – Magnetrol, Klinger etc.
* Vibration switches – Rabortshaw etc.
* Proximity Switches – Maglock, Airpack, etc.
* Solenoid Valves – Asco, Parker Hannifin, R.G. Laurence, Ruggless Klingeman, etc.
* Filter Pressure Regulators – Masoneilan, Fisher, Norgen
Control Room Systems Handled
* Mark II GEC Control Systems for Single and Twin Avon Gas Turbine Generator System.
* Mark V Control System for Frame V make Thomassen single shaft Gas Turbine – Generators.
* Mark V Control System for Frame VI make Kaverner Single shaft Gas Turbine – Generators.
* Chubb Fire and Sieger Gas Protection Systems for Rolls Roycee Avon Gas Turbine Generator Systems.
* Ajax Fire Protection System for Frame V Thommasen Gas Turbine Generators
* World-mate Fire Protection System (Allen – Bradley PLC based SLC – 500).
* Vibration System - 3300 Series Bentley Nevada for Thomassen and Kaverner Gas Turbine Generators.
* Vibration System – Vibrometer for Rolls Roycee Gas Turbine Generators.
* SCADA Systems for Load Dispatch Centre (LDC). (RANGER System – ABB and RTU System – HARRIS).
* Digital Fault Recorder (DFR) System – Hathaway
* Air Compressor System – Ingersoll Rand.
* H2S Open Path Monitoring System – Borel Laser.
* Portable Diesel Generators – Cummins.

SPECIAL ACHIEVEMENTS
* In 2005 after doing the detailed study and preparation of complete drawings replaced the old obsolete 5700 Sieger Gas Detection System with new 5701 Sieger Gas Detection System for the Frame V Gas Turbine Generators.
* In 2004 Provided the Temporary solution of failure Diesel Engine Governor Power Supply which is affecting the Frame VI Turbine Operation in critical condition.
* In 2005 Prepared the complete Spare Part List which has all the details of GE and Manufacturer Part no's, model no's, Tag no's etc. of GE Frame VI Gas Turbine Generators.
* In 2006 Involved the Hazzop Modification & commissioning of Frame V and VI Fuel Gas Skid Supply System (Introducing the new ESD Valves)

WORK EXPERIENCE
Regi Industries – Thane
Worked with above Company from Jan1997 to Jan1998 as an Instrument Supervisor.
Involving maintenance and Commissioning activities of Control Instruments and Systems.

Saudi Armco Riyadh Refinery - Saudi Arabia Worked with the above company for 3½ year from June 1993 to Dec 1996 as an Instrument Technician.

Control Room System Handled
* 7200 / 3300 Bentley – Nevada Vibration Systems for Centrifugal compressors and Westinghouse Turbines.
* Yamatech Honeywell Blend-O-Set Gasoline Blending System.
* Square D Solid State Shutdown TMR System for Compressors.
* Woodward Governor Control System for Westinghouse Turbine - Generators.
* GE Mark I Control System for Hitachi Turbine - Generators.
* ESD systems of Ingersoll- rand air compressors.
* Boiler Control System.
* Incinerator Control System.
Field Instrument Handled
* Pneumatic Controller – Taylor
* Rosemount Transmitter (Pressure, Flow, Temperature).
* I/P and P/I Converter.
* Control Valves – Fisher, Masoneilan.
* Turbine Flow-meters Insertion type – Danial
* Level Transmitters (Displacer type, Capacitance type, D.P.Cell type.
* Vacuum Transmitters.
* Analyzers (Oxygen, Moisture, Hydrogen)
Special Achievements
* In 1994 brought back Gasolene Blending System into Automatic Operation by Repairing Electronic Cards at component level of the Obsolete Yamateck Honeywell Instrument.
* In 1995 Participated in Upgrading Retrofit of Vibration System of Bentley Nevada 7200 analog system to 3300 digital system?
* In 1996 Involved in Trouble shooting of Sequence Controller of Nitrogen plant Revex valve exchanger sequence and provided the Temporary solution in place of PLC Failure to operate the Revex valve exchanger sequence and brought back the Nitrogen production.

Regi Industries –Thane
Worked with above Company from March 1992 to June 1993 as an Instrument Technician.
Installing and Calibrating the Field as well as control room Instruments.

Mid East Construction Company
(Mecon), Qatar
Worked for the above Company for 3 months from Dec 1991 to March 1992 as an Instrument Technician.
Installed and Commissioned the Waste water disposal system
On Onshore location (Halul Island) in this Project installed And Calibrated the Rosemount Pressure and Flow Transmitter and Masoneilan Control Valve. Programmed the Foxboro 761 Single Loop Controller. Shutdown Jobs on Offshore location (PS1)

India Glycols Limited
Worked with the above Company for 1½ years from May 1990 to Dec 1991 as an Assistant Foreman Instrument.
* Handled Taylor Mod 30 Programmable Controllers
* Foxboro 760 / 761 Programmable Controllers.
* Hitachi and Allen-Bradley PLC for Oxygen Plant.
* Yakogawa Centum DCS
* Analyzers (Servomax Oxygen and Lira Ethylene analyzers)
* Rosemount and Masoneilan Field Instruments.
Abhinav Electronics Worked with the above Company for1year from June 1989 to May 1990 as a Service Engineer.
* Assembling, Testing and Installing the Microprocessor based Temperature, Level Indicators and controllers. Specially Designed for Water Dams, Hydro water power turbines.

Bayer India Limited, Thane
Completed 1 year Apprenticeship is in Instrumentation Engineering.
* Calibration and maintenance of all Pneumatic and Electronic Instruments
* Servicing of Analytical and Laboratory Instruments.
* Conveyors belts.
* Siemens PLC – Simatic 110

SALARIES DRAWN Negotiable

ACADEMIC QUALIFICATION
Three year Diploma in "Instrumentation Engineering"
Certificate Course in "Microprocessor hardware and software"
Certificate Course in "Advance Basic Software Language"

TRAININGS
* SPEEDTRONIC Mark V Gas Turbine Controls Maintenance. - March 1999, Kvaerner Energy.
* Optical Fibre Transmission System – May 1999 – Serco
* Heavy Duty Gas Turbine Training Program – June 2001-Thomassen Service Gulf L.L.C
* Planning and organizing July 2002 – Spearhead Training
* Risk Assessment General Awareness – Sep 2002 – Nutec
* Emergency Communication Dec 2003 – National Centre for Management and Training.
* SPEEDTRONIC Mark V (Maintenance) – March 2004 – Caledonian Training Services (U.K.)
* Basic Analogue and Digital Electronics May 2005 – Caledonian Training Services (U.K.)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5651 to 5700 of 15498)

Go to Search Parameters...

Brief Description

Feasibility studies, basic and detailed engineering, cost estimates; Process Flow Diagrams (PFD’s) including mass & heat balances; Process and Instrumentation Diagrams (P&ID’s) including line sizing, equipment specifications; HAZOP participant, Vendor inspections, commissioning & start-up assistance

I have 12 years experience in Automation(DCS & PLC). I also worked as project management.

For the past 15 years my career in the field of Inspecting with BHEL and ARAMCO has focused onshore oil and gas production operations and construction of Petrochemical Plant, Power Plant, and LNG storage tank in India and Middle East.

Integrated Drilling Evaluation and Logging system, integrated down hole directional drilling, drilling mechanics and petrophysical data measured within few feet of the bit and transmitted to the surface in real time. Log interpretation and Formation evaluation from recorded logs.

Assistant professor-Hydrogeologist with 9 years of experience Main fields of expertise: -Evaluation of groundwater resources in various aquifers -Water supply schemes (well design, pumping tests etc.) Participated and led over 60 Research projects from 1995 Full PC and GIS skills

EXPERIENCE Environmental systems design and installation Site assessment and remedial investigation Wastewater treatment systems Project oversight and quality control

I am well trained to handle terminal operations, stores / materials management and Engineering / Maintenance activities related to Oil terminals / Petroleum retail outlets. I am 38 years old and have no problem in relocating to a suitable location / posting.

Experienced Oil and Gas professional with over 12 years engineering, applications, marketing experience. Self starter with experience in Electric Submersible Pumps (ESP), Variable Speed Drives (VSD/VSC), downhole instrumentation, permanent monitoring and fiber optic monitoring systems.

To secure supply position-involving procurement, contracts and logistics coordination where my skills may be fully applied overseas, Africa or domestic assignments

ecologist with a background in zoology and specifically ornithology where the focus of his PhD research was on the impact on bird communities in general and gamebirds in particular and their response to various forms of agricultural practice.

Software Engineer with over 15 years experience in the development of software, database designs and real-time software solutions.

Presently working as Finance Manager for a Swiss MNC in Bangalore. Over 14 years experience both in India and Middle east including E&Y audit firm covering areas of finance, accounting, Control, budget, financial reporting, system design and implementation.

I am a process control engineer with over 15 years of experience of design, implementation and commissioning of process controllers for the refining and petrochemical process units. I am available to work on contract basis immediately.

I'm Egyptian Geophysicist with more than 15 years experiences in seismic data processing ( 2D & 3D). I gain experiences in well logs processing and producing synthetic seismogram. My full detailed experiences are in my CV......Regards....

A total of eighteen (18) years, Electrical, Mechanical, Piping, Instrument drafting experience in a wide variety of industrial sectors

Technical mining management professional with proven success in surface mine engineering, environmental and operations searching for a position in Operations or General Management.

INSTRUMENTATION TECHNOLOGIST NAIT graduate June 30, 2004. Previous experience as Plant/Process Operator in coal mine. Seeking entry-level position in the industrial field that allows use of my acquired technical training and includes exposure to a wide variety of occupational related tasks

Principal environmental skills with oil & gas experience in: - EMS and Integrated HSEMS - Hazard, Impact and Risk Assessment - Waste, Energy and Material Resources Management Systems - Auditing and Performance Analysis - Training and Awareness Development

Mechanical Engineer with Masters and experience in oil and gas. Competent in thermal systems and two-phase flow analyses. Maintenance Engineering experience with rotating and fixed equipment.

I hold a B.Sc. degree in Civil Engineering, 15 years experience in construction project supervision and project management. Overall I'm capable of supervision/management of most types of construction projects.

SUMMARY OF EXPERIENCE •15 years Post Degree Experience in reputed multinational Oil & Gas, chemical process industries with emphasize to project execution, plant maintenance, and workshop management and inventory control on spare and consumables.

A highly accomplished gas turbine field engineer and power generation equipment service director. Experienced in turbo-electric machinery installation and maintenance, asset and contract management, profit and loss finance, electro-mechanical troubleshooting, quality control, and staff management.

BSC in Mech. Eng., post grad. in Petroleum Eng., reservoir engineering exp.( developing and management, black oil, gas and composition reservoir simulation, tech. and econ. eval. Studies, IOR and EOR methods-8 yrs.) and IT consulting, services and project management (12 yrs.)

I have robust bases in the quantitative and qualitative expertises of oil productions raw product and refined, the controls of expeditions by pipe, vessels or lorries. This experience(experiment) allows me to transpose my knowledge in sectors of industry as the mining extraction.

Enclosed please find my detailed resume for Structural Engineer job openings you may have. As my resume will attest, I appear to have excellent qualifications for this position

My background is in the offshore fabrication industry. I am interested in Project Management and Fabrication Management, but will certainly entertain any offers, especially for positions in Australia.

2002- Present Head of Upstream Joint venture of NPC/SASOL 1998- 2000 Sr. Process Eng. IOOC / TS (TOTAL SIRRI) 1994- 1998 Production Eng. SIRRI /KHARG/LAVAN ISLAND

Skilled HSE professional seeking employment

To expand my knowledge, enthusiasm & ability by assuming a position of higher responsibility, with the qualities of adaptability, dynamism & perseverance.

Well experienced Project Architect / Coordinator /Auto Cad Designer / Quantity Surveyor

Qualified welder 10 years experience ( QC, NB, AB) pipe welder , willing to travel

With 7 years of rich experience in Plant Operations, Production. Presently working with Niko resources Ltd., as a Lead Production Operator.Functional expertise in handling the production operations with key focus on bottom line profitability by ensuring optimal utilization of resources.

I did B.Sc (Mathematics), Diploma In Mine Surveying, and Advances In Mine Surveying Technology (Indian School of Mines) . I am Using SURPAC Software From last 14 (Fourteen) Years in U/G Mine as well as in Open Pit Mine.

I have over 15 years of experience in this field and acquired enough knowledge. I had handled very challenging assignments. As an Instrument foreman I was fully involved in my business wherein I had to identify potential opportunities and gain wide knowledge.

20 years experience in EHS

Feasibility studies, Process Design & Consultation, process Development , Project Management, Electro-mechanical installation, Pre-Commissioning & Commissioning, Start – up & Operation of Industrial Projects

I had successful career in Army and now voluntary retirement and working for MNCs in Bangalore, India. I have vast experience in Administration, Human relation management and facility management.

I have ten years experience in SITEP (ENI partner) and my qualification is Maintenance supervisor

Production supervisor/production operator/ on job trainer

Health, Safety Environment Engineer/ officer &

Geological exploration works including mapping, bulk sampling, drill hole planning, logging and sampling during drilling.

highly motivated exploration geophysicist

Instrument Design Engineer with 4 years of Experience in a world recognized oil and Gas Company JGC-Descon, having experience of Instrument Master Index , JB Wiring, ILD Generation, Main control Panel Wiring, PLC Cabinet Wiring, Main Control Panel Schematics Diagram, HOOKUps, MTO

Structural Cad Detailer, Site Engineer

Co-ordination and inspection of all Quality Control activities like Surveillance of day to day Fabrication, Welding and Erection of Piping and Structural works of Rigs, Co-ordination with clients, Reporting to Project Managers, Coordinating and witnessing of various N.D.T & Destructive testing.

Mechanical Engineer with AWS CWI # 09021281. I have 4.5 years experience in the field of Quality Control and welding inspection in Oil & Gas Projects involving Onshore Pipelines and piping of platforms, Piping of Refineries, process plants. Fabrication of Pressure vessels, Boilers and Heat ex

QMS development and certified lead auditor for ISO 9001:2008

Heavy diesel mechanic since leaving school 20 years ago

Designer having 10+ years of experience in the Electrical detailed engineering on Power Plant, Oil &Gas (Onshore/Offshore) and Petrochemical projects in both Indian & Global projects.

Geologist and mineralogist (double degree, diploma). 1 year experience in mapping, supervision (rig and camp), underground, grass root exploration and production.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 [ 114 ] 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out