Resume - I am an experienced engineer with productive employment and education in the fie...

Misco Jobs

Resume #4451

CONTACT INFORMATION:
View contact information...

PROFESSIONAL PROFILE
Process and Commissioning Engineer with experience in:
* Managed process and plant operations for upstream oil facilities, gas treatment and processing, heavy petrochemical and refinery,fertilizers and utilities plants
* Hands-on experience with the Process plant simulators (HYSYS, PROII, ChemCad, Design II) and pipe-network simulators(PipeSim, PipePhase)
* Commissioning, Start-up, Operation and maintenance of large utility and gas processing systems (water and waste water treatment, air separations, steam producing and distribution, gas treatment, processing and sweetening systems)
* Plants revamping, Field Engineering, Material Requisition and feasibility and bottleneck analysis
* Engineering supervision of process improvements, troubleshooting, optimization and design enhancements
* Technical interfaced between management, constructor and vendors
* Dealing with routine monitoring of the technical aspects of plant operations: process pre-commissioning, commissioning, start-up and normal running
* Experience with state of the art control equipment (DCS, Honeywell TDC, PLC)
* Training of technical staff and operating personnel

PROFESIONAL EXPERIENCE
AGOCO Lybia – Operation Department May.2003 – present
Senior Process Engineer
* Report to the Operation General Manager for all operations activities with concentration on process optimization and economics to achieve highest safety standards and best efficiency at reasonable cost.
* Propose process improvements, troubleshooting, optimization and design enhancements and bottleneck studies for company upstream oil and gas field on-shore facilities;
* Prepare detailed mass and energy balances; perform piping system hydraulics calculations using PipePhase and PipeSim simulators; also involve in relief and flare systems design evaluations and enhancements.
* Run process simulations using HySys 3.1 and ChemCad 5.2 so that process performance design checks can be completed and to evaluate whether off the shelf equipment can be incorporated into the process flow scheme.
* Assist Field Superintendent in development of work scope and execution of plant turnarounds including: develop procedures for work while down, ensure proper isolation of equipment prior to maintenance activities, maintain timelines and be flexible and creative as problems occur.

Karachaganak Process Complex, Aksai KAZAKHSTAN Nov.2002 - May.2003
Process Engineer
* Involved in many Upstream Oil and Gas projects in this capacity work independently and handle process activities on projects, like going for site visit, handling Client comments, client co-ordination, participation preparing process study reports, preparing process drawings etc.
* Performed performance process simulations using HYSYS for gas plant (Amine regeneration, Glycol units and Sale Gas dew point checking); Prepare of heat and mass balances, process flow diagrams, P&ID's, pipeline calculations and equipment sizing (HySys, PipeSim, ChemCad simulators)
* Also, involved on the commissioning and start-up operations for Process water treatment, Condensate stabilisation, Dew Point Control, Fuel gas sweetening and dehydration and amine regeneration
* Participated in the Start Valve by Valve Write-up of Commissioning and Start-up Procedures; Coordinate Hydro and Pneumatic Field Tests;
* Supervision activities in Line and Equipment Chemical Cleaning and the Punch List; Prepare System Hand Over/Acceptance List;
* Participate to plant start-up; Involve in plant day to day operations.

Shurtan Gas Chemical Complex Project, Shurtan, UZBEKISTAN Aug. 2000 – Oct.2002
Commissioning/Startup and Operation Specialist for Utilities Plant
* As a commissioning specialist, I was involved in elaboration of procedures, and supervision for precommissioning works made by subcontractors for following areas Utilities and Off-Sites, for following activities:
- washing, blowing of the units circuits
- chemical washing of compressors circuits and equipment's
- equipment inspection: vessels, columns and tanks
- instrument loops checking and testing of PLC, ESD,DCS logic's for compressors, dryers system, boilers furnaces and other equipment's (pumps, fans etc);
* I have participated effectively at start-up and normal operation, operating on panel, DCS Honeywell TDC 3000
* Responsible for the on-shift operations and troubleshooting of the Utilities Plant
* Managed and controlled the water treatment plant;
* Monitoring of clarifier operations, water filtration and chemical addition systems.
* Operating Atmospheric towers, vacuum distillation towers, and flash recovery tower, steam generators, natural gas heaters, exchangers, vapor recovery systems, chillers, waste water treatment, scrubbers, and pumps

ENDO FOOD TECHNOLOGIES INC. TORONTO Jun.1997 - Mar.1999
Plant Supervisor
* Reviewed all process parameters and finalized the operating procedures for the automated food grade production facility
* Initiate, following up, and interpreting results of lab evaluations used to improve product performance, develop new formulations, prepared statistical process reports

CANADA COLORS and CHEMICALS LTD. TORONTO Oct.1996 – Mar.1997
Quality Control Advisor
* Prepare technical product documentation as per ISO 9002 requirements
* Assess company's product analysis methods against ASTM / ISO test methods
* Operate lab equipment (GC, titrators) for wet product analysis as per ASTM

CHIYODA CORPOPATION (Japan) Mar.1994 May.1996
ELEME PETROCHEMICAL COMPLEX–SHELL, Nigeria, Utilities Section
Plant Shift Supervisor / Process Engineer
Responsible for the following utility systems:
Water Treatment and Supply System for steam generation boilers
Recovery Water Cooling System (10 draft cooling towers and chemical processing)
Nitrogen Generation System (liquid air separations), Sludge Incineration Unit
Waste Water Treatment, Instrument Air, Fuel Gas, and Flare Systems
* Supervised two technical teams during the commissioning of the above systems
* Trained and then supervised the operators of the systems under responsibility
* Executed back up operations and finalized the Operation Procedures for the Commissioning Manager approval
* Prepared process reports and production sheets for the systems during operation
* Performed simulation of processes using DCS software on Yokogawa PLC system

BRAZI PETROCHEMICAL COMPANY - Romania 1985 1994
Petroleum refinery and petrochemical production complex (6M Tons/y crude)

Petrochemical Division Dimethyl Terephtalate Plant Oct.1991 - Mar.1994
Plant Superintendent / Revamp Engineer
* Responsible for 4 foremen and 40 operators on a DMT throughput of 150 tons/d
* Developed the issue for revamp stage the Process and Utility P&ID's, performed hydraulic calculations, PSV and PSE mechanical sizing and line designation Tables
* Prepared statistical reports and maintenance scheduling for Plant Manager approval
* Leader of the Operation Review Team during the implementation of these plant improvements
* Responsible for the training programs of technical staff and operators

Petrochemical Division Phenol and Acetone Plant Oct.1987 – Oct.1991
Production Engineer/Process Engineer
* Responsible for the plant operation and the monitoring of solid, liquid and gaseous waste discharges (100 tons/d plant output)
* Carried out the design upgrading plant activities
* Coordinated production activities related to the replacement of an analog control system with a digital one (Honeywell TDC 2000)
* Involved in identifying the relief loads and bottlenecks, PSV's size checking for new loads, sizing discharge laterals and checking plant relief header for the revised loads.
* Lines sizing and piping class selection. Produced the line designation tables

Petrochemical Division Technical and Marketing Department Dec.1985 – Oct.1987
Process / Application Engineer
* Responsible for the technical review of projects during the implementation of major plant/process modifications
* Produced process data sheets for equipment, vendor packages, control valves and pressure relief valves.
* Coordinated with the other involved disciplines and performed technical bid evaluation for the equipment.
* Field data obtaining and evaluations.
* Provided technical support AV presentations to a team of sale people marketing pilot size petrochemical plants rendered obsolete by the start up of large scale units

ISALNITA CHEMICAL FERTILIZER COMPANY 1982 1985
Process Engineer - N.P.K. Complex Fertilizer Manufacturing Plant
* Monitor the process (control room and production area) and maintained inventory status for the complex (150 tons/d of various fertilizers)
* Produce the preliminary design (process flow diagram and material and energy balance) of a phosphoric rock grinding plant

EDUCATION
* Master degree in Chemical Engineering. Major: Technology of organic substances University of Timisoara, Romania
* Analyst programmer and DB management training course 1991-1992,
National Institute for IT, Bucharest Romania

INDUSTRIAL TRAINING
D.C.S. Training on YOKOGAWA 100 Accident Control for Supervisors
Analytic Troubleshooting Flammable Liquids Firefighting
Permit Systems and Gas Testing Haz/Op Training

* References supplied upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 15329)

Go to Search Parameters...

Brief Description

20 years experience in mine planning and mine operations in several countries including Australia, India, Japan, Jordan, Indonesia, South America and North America.

Twenty years of mining experience gained from working in industry and from consulting. Thirteen years of direct operational experience that has encompassed underground mining as well as surface alluvial and marine diamond mining operations.

A western educated finance professional with 23 years of accounting, strategic cost analysis, corporate finance, listing, valuations, banking, project finance and execution, supply chain, restructuring, turnaround, strategy, business development and board experience with world class multinationals.

More than 20 years as a Petroleum/Reservoir Engineer in Exploration and Production Company with heavy emphasis on reservoir management: India (Oil and Natural Gas Corporation Ltd.), Kuwait (Kuwait Oil Company), Abu Dhabi (Zakum Development Company) and Oman (PDO-Shell).

An Oil and Gas Professional with expertise in International Operations Management, Assessment of Technical Data, and Long-term Business/Budget Planning. Managed international operations, PSC and construction contract negotiations, liaise with foreign governments and, field exploration/development.

25 YEARS OF MANAGING & BUILDING A/E PROJECTS EXCEEDING $ 600 MILLION BS & MS - CONSTRUCTION MANAGEMENT - MINOR IN CIVIL ENGINEERING - 4:00GPA FORMAL EDUCATION IN ARCHITECTURE -QUALIFIED WITH A.R.E IN THREE STATES

Seeking a position as an executive with responsibilities for better performance, skills improvement and emphasis on environment for teamwork for company as well as personnel growth.

HAVING 23+ YEARS OF SERVICE ,INCLUDES 20YEARS IN INDIAN AIR FORCE AND PRESENTLY ENGAGED WITH PRIMUSTELECOMMUNICATION INDIA LTD

Business Analyst Technical Writer Project Manager Programme Director

Take advantage of 30 years corporate experience. I can train your junior staff to become very proficient with Paradigm's GEOLOG 6 software. My specialty is reservoir characterization, with emphasis on probabilistic log interpretation using GEOLOG's Multimin program. Worldwide contracts considered.

Electrical, Control Systems and Instrumentation Engineer: great international experience designing, installing, testing, calibrating, starting up, commissioning, maintaining and repairing industrial electrical, instrumentation and control systems, in the natural gas and others industries.

Senior Engineer with Masters in Business Administration and possessing over twenty-two years of experience in Electrical/Instrument Maintenance and Project works in refining and petrochemical industries.

QHSE Manager, EOD/UXO consultant, height safety specialist, International experience and dedicated professional.

SAS and COBOL Programmer with DB2 and SQL experience

OBJECTIVE Seeking a challenging position at senior management level in R&D and Manufacturing / Technical Services / Applications Development / Technology Strategy Planning./Project Implementation

Seeking a Senior management position in operations, design-build, EPCM, contract management, and business development in either the domestic or international industry.

A dynamic and enthusiastic Chartered Mining Engineer with MBA and extensive International Business Management and Change Management experience. Committed to continual improvement in people, safety, quality, efficiency and profitability.

25 years of experience in the environmental aspects of power plants and the oil and gas industry. Work experience in Southeast Asia, Middle East, West Africa, East Africa, Central America, South America, North America, Eastern Europe, UK, USA, Former Soviet Union

Offering MBA Leadership, insightful, analytical, and creative engineering leader successful in conceptualizing and implementing cost-effective solutions and leveraging key advantages in complex environments. Resourceful team builder and project manager adept at building and leading teams.

Seeking a position in which proven technical, organizational, assessment, and communication skills as well as project management skills are utilized for the successful discovery and/or mining of ore deposits in complex and challenging geologic terrains.

Over 20 years of Oil and Gas experience using/supporting technical applications for oil companies & vendors (Landmark, Geoquest, and Paradigm). The past 8 years, my focus is on project management, building/leading application support team, workflows, database, data management and GIS solutions.

PDMS Desgn,Draft, Isodraft and Catalogue Creation and MDS supports

ELCTRICAL ENGINEERE

Level 4 scheduling in oil&gas with Primavera

Continuous scaffolding job for more than twenty (20) years in the field of construction, Petro. Chemical Plant and Oil & Gas Industry.

I am a mathematics post graduate alongwith apprentice training in refiney technology. I have choosen refinery tech. as career. Approximately 17 years in Petroleum and Petrochemical industry working as a Plant Manager/superintendent/shift controller/ Supervisor / Operator including 13 year on ovseas.

Electrical & Instrumentation Inspector - Broad experience in E&I installation in Fabrication of Offshore Production Platform, FPSO, D.P Cable Laying Vessel and Oil & Gas Refinery Plant. (Knowledgeable in industry standard recommended practice: NEC 500, IEC/NEC 505, API RP14C, 14F.

Instrument engineer

I am an experienced AutoCAD operator / draftsman with expertise on mechanical, structural, civil and electrical drawings, using Autocad 2009. I have eleven years of extensive hands-on work experience in a manufacturing as well as construction set-up.

Barge Anchor Operator, Rigging, Scaffolding Foreman offshore, Crane driver 100t and Tower.

To Carried out overhauling, repairing preventive, corrective breakdown, and shutdown mechanical maintenance, trouble shooting, condition monitoring, alignments, hydro testing, of rotating & static equipments, like pumps, compressors, fin fans blowers, heat exchangers, column, and using all type of

I have worked more than 12 years in Oil & Gas, Refinery, Petrochemical industry as a field operator and DCS & SLPC control panel operation at off-shore & On-shore.

18 years experience in Gas- Petrochemical industries as sr. Technician, assistant shift supervisor, etc

My strengths are my ability to take charge and work well within a team environment and in my experience in developing algorithms from concept phase to commercial implementation

Read blue prints, electrical scymatics, troubleshooting and repairing electronic devices for the industrial sector and wireless communications equipment.

Information Management, Data Management and CAD Systems Management

Over than 9 year experience joint in Oil & Gas industrial. Specialize on inspection, testing and documentation for fabrication, installation structure and piping work for offshore Jacket structure and pile make up, process & living quarters offshore platform, FPSO piping process and floating system,

A professional Mining Engineer with 15 years experience in mine ventilation

I have vast experience in the Safety related field.

20 years experience in the Instrument & Controls through to Information Management arena

I am an experienced engineer with productive employment and education in the field of processing, supervision, commissioning, start-up operations, production and design.

Nimr'C' Full field water injection project.

Installation of electrical pipe,electrical wiring,electrical controls,electrical panel board.Installation of main over current protection,lightings,switches.Banking of transformers and splcing of wires.Installation of A.C. electric motors,magnetic contactor.Installation AHU,ACU,FCU,colling tower

10+ years of combined professional experience utilizing geophysical interpretation, seismic processing, single stack and simultaneous deterministic inversion, 3D geo-cellular modeling, software consulting, training, and development skills. Working knowledge of 3D interpretation techniques, etc.

I am an experienced senior geologist aged 36 and I believe your company offers the right opportunity for my development into senior management. I hold a Bachelor of Science Degree from the University of Zimbabwe, which I obtained in 1994. I also hold a Certificate in Mineral Resources and Geological

SDE with very good experience in very demanding working environment; person self-motivated, performance driven, team player, with good IT skills. Experience in FSU and Eastern Europe. Bilingual Spanish– English, with basic conversational knowledge of Russian.

 Project Management; Demand Forecasting; Simulation & Analysis Packages/Models

Mechanical Engineer & a result oriented professional with qualitative experience of over 13 years in Cost Estimation, Planning & scheduling and Cost Control in the EPCM & EPIC projects of Offshore and Onshore Oil & Gas, Port & LNG Terminal and Petrochemical plants in Nigeria, India and Middle East

I am a professional Mechanical Engineer with 20 years Gulf experience with MEP services in building construction..

PROFILE:A Piping/mechanical superintendent with 13 years experience in the petrochemical & construction industries in Middle East. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives. First-class analytical, design and problem solving skills. Good

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out