Resume - Production supervisor/production operator/ on job trainer

Misco Jobs

Resume #45010

CONTACT INFORMATION:
View contact information...

JOB OBJECTIVE
Control Room Operator/Field Supervisor/On Job Trainer

TOTAL EXPERIENCE 18 Years India: 7 years Abroad: 11years

Permanent Address B104 Sanket, Ujjwal Nandadeepco-Op Hsg Society, Evershine Nagar, Off Link Road Malad West; Mumbai-400064. India.

EDUCATIONAL QUALIFICATION
N.C.T.V.T. Certificate Course on Plant operations, Ministry of Labour, Govt of India. (3 years - in Grade I)
TECHNICAL COURSES ATTENDED First Aid, H2S Permit, Work Permit (Hot/Cold) Course, Gas Testing, Confined Vessel Entry Course. Basic Sea Survival training. Shell Nigeria On Job Trainer Course.

OTHER INFORMATION
L.M.V. Indian Driving License available.International Driving License Available Working knowledge of Computers like MS office 97
Commissioning experience of FPSO.
Salary expected: Negotiable

WORK EXPERIENCE:
1. Production Operator / Production Field Supervisor (Well Head) Total Fina Elf Iran
June 2005 to Feb 2006
Responsibilities As Production Supervisors Are:
a) Involving in the commissioning of Oil, Gas and Water Injection wells b) Coordinating with the rig activities like SIMOPS (Simultaneous Operation), Preparing Daily reports and attending daily production meetings. Coordinating with SIMOPS activities of ESD1, PSLL & PSHH test on the wellheads. Coordinating with the commissioning of new wells including Flow line Hook-up, perforation, acidizing and clean-up. Training of Local Iranian well head operators.
c) Weekly testing of the safety systems of the well heads.

Sincejan 2005 To June 2005
Responsibilities As Production Operators Where:
a) Involved in the commissioning of the Oil and Gas facilities like Amine treatment Unit, Glycol Gas conditioning unit using TEG, Oil separation and Stabilization unit producing oil 80000 barrels /day and Gas Compression Unit.
b) Training of local Iranian operators.

2. Production Operator (Offshore)
Adma Opco (Abudhabi U.A.E)
May 2004 to Sept 2004 (Short term commissioning contract)

Responsibilities are:
a) Coordinating the commissioning activities of Gas Injection Plant Phase 3. Monitoring the process in CSP (collector Separation Plant which is Oil gathering Plant); GG2 (Gas Gathering Plant which is also gas injection plant which has 3 Rolls Royce Avon Gas Turbines and 3 Dresser Rand Gas Compressor injecting 90mmscf gas per day) and GIP (gas injection plant) which take its gas from GG2 and injection it at 5000psi pressure. Gip has 3 Rolls Royce Compressors and injects 100mmscf gas per day). Also have to do coverage in Water Injection Plant injecting water to water wells at 3500psi pressure using the DCS (distributed control System) of Bailey.

b) Reporting of abnormalities to the Superiors. Training of the local Operators.
Coordinating with permit to work activities of the plant such as mechanical, electrical and instrumentation jobs in the plant.

3. Control Room Operator (Offshore)
Shell Petroleum Development Company (Nigeria)
From May 2001 to Jan 2003

Responsibilities Are:
a) Commissioning and Monitoring of the oil gathering Station and Associated Gas Plant (For Flare Reduction Project) using the DCS system of FOXBORO I.A.
b) Commissioning and Monitoring the Equipments such as the Gas Compressors and Power generators and turbines (Nuovo Pignone) using the DCS system.
c) Training of the Nigerian Operator trainees

4. Process Operator (Offshore)
Ras Laffan L.N.G. Company (State Of Qatar)
From September1998 To July 2000

Responsibilities Are
a) As process operator monitoring of gas production from Well heads (Gas wells).
Monitoring Glycol Dehydrating system using D.C.S (FOXBORO I.A.).Monitoring the Operation of Typhoon Gas Turbine Generator Sets.
Logging production data and reporting any abnormalities to the production supervisor. Coordinating with Mechanical, Instrumentation, Electrical, Well services and Safety departments for day-to-day plant activities.

5. Production Operator/ Well Head Operator

a) Petroleum Development Oman, (Shell), Oman.
September 1993 to April 1994, June 1995 to November 1995.
b) Al Furrat Petroleum Company (Shell Petroleum Co.) Syria,
Jan 1996 to Dec 1996.
c) Petroleum Development Oman, (Shell), Oman.
From March 1997 to Jan 1998.

Responsibilities Included
a) As Production Operator in Oil gathering stations operating the facility which includes Well Heads, Gas Lift, Water injection, Oil Gathering Stations, PIG Launching / Retrieving, Glycol Dehydration, Propane Chilling, NGL Recovery and Gas Sweating (SULPHEROX) and LNG Plants.
b) Monitoring of crude oil production by maintaining the required station backpressure.
c) Monitoring the gas lift to the individual injection well.
d) Monitoring of water injection to individual water injection wells using the latest SCADA technology and RTUs.
e) Testing of individual oil wells using Daniel Senior orifices for oil, BSW periodically and reporting of abnormalities in production to the supervisor and preparing test sheets for the wells being tested. Also testing of Oil wells using the Multi Component flow meters.
f) Periodic monitoring of Chemical injections like corrosion inhibitor injections, Demulsifier injection & scale inhibitor injections.
g) Periodic monitoring of individual well heads for abnormalities and well output.
h) Checking the annulus pressure of individual wells for communication between annulus for the casing.
Monitoring the well head safety conditions and coordinating with the wire line crew for jobs such as flowing gradient survey using Amerada, static survey, build-up survey, acid stimulation job, well kill job, Gauge Cutter Runs, Well Unloading etc., i) Monitoring safety of the plant and the safety of the hot work / cold work job going on in the plant and logging of plant conditions. Also handled Hot Tapping jobs.
Well versed in Oil and Gas separation process and testing of individual well production using latest D.C.S. of TDC 3000 of Honeywell, U.S.A.
Well versed with Solar Centaur, Ruston TB5000 and Rolls Royce Avon Gas Turbines.
Handled multi-stage gas compressor (Nuovo Pignone) having capacity of 62500 NM3/hour and also handled DEMAG Booster Compressors and Dresser Centrifugal Compressors, Multi stage Babcock Borsig Centrifugal compressors and also related equipment's such as gas scrubbers and Fin-Fan coolers.
Handled emergency and normal start-up and Shutdown activities of the oil gathering Stations.
Preparing daily production reports on PC and reporting to the supervisor concern.
Training of Local operators and trainees.

6. Plant Operator
Saudi Iron and Steel (Hadeed, Al-Jubail).
March 1992 to June 1993

Responsibilities Included
a) Worked as Plant operator in-plant for producing iron from iron oxide by reduction using carbon monoxide and hydrogen.
b) Worked in Natural Gas Pre-treatment plants.
c) Well versed with reforming process and Shaft furnace.
d) Well versed with Control systems TDC-3000 of Honeywell, U.S.A.
e) Well versed with Cryogenic distillation of Methane.
f) Handled the shut down and start up activities in the plant.
g) Training of local trainee operators.

7. Distillation Operator - Grade A
Reverse Osmosis Desalination Plant
Ministry Of Works, Power And Water, State Of Baharain.
August 1989 to August 1991.
Responsibilities Included:
a) Keeping the plant in proper running condition.
b) Monitoring equipment's such as heavy duty submersible centrifugal pumps (capacity 6000 cubic meters per hour); Dual media filters controlled by P.L.Cs (programmable logic controllers); timely logging of plant conditions; controlling the plant parameters such as pressure, flow etc. Using modern Digital Control Systems (CENTUM of YOKOGAWA, Japan)
c) Reporting of any abnormalities of the plant equipment's and process to the foreman concerned.
d) Cleaning the permeater membrane chemically according to laboratory requirements and specifications, using chemicals like sodium sulphate, citric acid, ammonia, detergents, tannic acid and formalin.
e) Re-coating the inner membrane parts to give better output.
The total output was 10 million gallons per day)
Lubrication of equipment's.
f) Training of local operators.

8. Process Technician
Bharat Petroleum Corporation Ltd., Refinery Division,
Bombay, India. (Former SHELL Refineries)
August 1982 to August 1989
Worked as a trainee operator from August 1982 to August 1985. On completion of the training period and successful completion of the N.C.T.V.T. examination conducted by the Govt. Of India was confirmed as Process Technician (Refining Division).

Responsibilities Included
Worked as Process Technician at the aromatics unit of the refinery, which manufactures Benzene and Toluene using Naphtha as raw material. The Benzene output was 85000 MT per year and Toluene output was 17500 MT per year.
Performed assignments in various units of the Oil Refinery such as:

a) Crude Distillation Units having processing capacity of 20000 tones of crude per day. The Crudes include Bombay High crude, Iranian heavy and light and Middle East Crudes like Royal Saudi Crudes. The products of CDU are L.P.G., Wild and treated Gasoline, High-Speed Diesel oil, LDO (Light Diesel Oil), Kerosene and Aviation Turbine fuel.
b) Vacuum Distillation units producing Waxy distillates for Cracking unit.
c) Bitumen Blowing Unit producing Bitumen.
d) Catalytic Cracking Unit using Silica Alumina as Catalyst producing L.P.G, Light Cycle Oil, and Heavy Cycle oil clarified oil and high Octane Gasoline as end products.
e) Sulphur Recovery units to recover H2S from Refinery off-Gases by using Claus process.
f) Platinum Reforming Unit used for producing higher Octane Gasoline.
g) Tank age and Blending Units for dispatching the products such as Gasoline, Diesel (H.S.D.), L.D.O, ATF and LPG.
h) Utilities section including Demineralising plant and Water softening plant, Boilers (BABCOCK and WILCOX make and Cross Tube Marine Type), cooling water system using Turbo set pumps.
Handled the Refinery equipment's like pumps of Centrifugal types and Reciprocating types (positive displacement types) Absorbers, Separators, Air drying units, Reboilers, Distillation columns, Vaporizers, Heaters or Furnaces, Coaelcers, Thomassen Gas Compressors, Atlas Copco Air Compressor and Steam Turbines. Experienced in Plant monitoring using Distributed Control Systems of CENTUM of YOKOGAWA Japan, HONEYWELL, USA (TDC 3000) and FOXBORO, USA.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5651 to 5700 of 15488)

Go to Search Parameters...

Brief Description

Software Engineer with over 15 years experience in the development of software, database designs and real-time software solutions.

Presently working as Finance Manager for a Swiss MNC in Bangalore. Over 14 years experience both in India and Middle east including E&Y audit firm covering areas of finance, accounting, Control, budget, financial reporting, system design and implementation.

I am a process control engineer with over 15 years of experience of design, implementation and commissioning of process controllers for the refining and petrochemical process units. I am available to work on contract basis immediately.

I'm Egyptian Geophysicist with more than 15 years experiences in seismic data processing ( 2D & 3D). I gain experiences in well logs processing and producing synthetic seismogram. My full detailed experiences are in my CV......Regards....

A total of eighteen (18) years, Electrical, Mechanical, Piping, Instrument drafting experience in a wide variety of industrial sectors

Technical mining management professional with proven success in surface mine engineering, environmental and operations searching for a position in Operations or General Management.

INSTRUMENTATION TECHNOLOGIST NAIT graduate June 30, 2004. Previous experience as Plant/Process Operator in coal mine. Seeking entry-level position in the industrial field that allows use of my acquired technical training and includes exposure to a wide variety of occupational related tasks

Principal environmental skills with oil & gas experience in: - EMS and Integrated HSEMS - Hazard, Impact and Risk Assessment - Waste, Energy and Material Resources Management Systems - Auditing and Performance Analysis - Training and Awareness Development

Mechanical Engineer with Masters and experience in oil and gas. Competent in thermal systems and two-phase flow analyses. Maintenance Engineering experience with rotating and fixed equipment.

I hold a B.Sc. degree in Civil Engineering, 15 years experience in construction project supervision and project management. Overall I'm capable of supervision/management of most types of construction projects.

SUMMARY OF EXPERIENCE •15 years Post Degree Experience in reputed multinational Oil & Gas, chemical process industries with emphasize to project execution, plant maintenance, and workshop management and inventory control on spare and consumables.

A highly accomplished gas turbine field engineer and power generation equipment service director. Experienced in turbo-electric machinery installation and maintenance, asset and contract management, profit and loss finance, electro-mechanical troubleshooting, quality control, and staff management.

BSC in Mech. Eng., post grad. in Petroleum Eng., reservoir engineering exp.( developing and management, black oil, gas and composition reservoir simulation, tech. and econ. eval. Studies, IOR and EOR methods-8 yrs.) and IT consulting, services and project management (12 yrs.)

I have robust bases in the quantitative and qualitative expertises of oil productions raw product and refined, the controls of expeditions by pipe, vessels or lorries. This experience(experiment) allows me to transpose my knowledge in sectors of industry as the mining extraction.

Enclosed please find my detailed resume for Structural Engineer job openings you may have. As my resume will attest, I appear to have excellent qualifications for this position

My background is in the offshore fabrication industry. I am interested in Project Management and Fabrication Management, but will certainly entertain any offers, especially for positions in Australia.

2002- Present Head of Upstream Joint venture of NPC/SASOL 1998- 2000 Sr. Process Eng. IOOC / TS (TOTAL SIRRI) 1994- 1998 Production Eng. SIRRI /KHARG/LAVAN ISLAND

Skilled HSE professional seeking employment

To expand my knowledge, enthusiasm & ability by assuming a position of higher responsibility, with the qualities of adaptability, dynamism & perseverance.

Well experienced Project Architect / Coordinator /Auto Cad Designer / Quantity Surveyor

Qualified welder 10 years experience ( QC, NB, AB) pipe welder , willing to travel

With 7 years of rich experience in Plant Operations, Production. Presently working with Niko resources Ltd., as a Lead Production Operator.Functional expertise in handling the production operations with key focus on bottom line profitability by ensuring optimal utilization of resources.

I did B.Sc (Mathematics), Diploma In Mine Surveying, and Advances In Mine Surveying Technology (Indian School of Mines) . I am Using SURPAC Software From last 14 (Fourteen) Years in U/G Mine as well as in Open Pit Mine.

I have over 15 years of experience in this field and acquired enough knowledge. I had handled very challenging assignments. As an Instrument foreman I was fully involved in my business wherein I had to identify potential opportunities and gain wide knowledge.

20 years experience in EHS

Feasibility studies, Process Design & Consultation, process Development , Project Management, Electro-mechanical installation, Pre-Commissioning & Commissioning, Start – up & Operation of Industrial Projects

I had successful career in Army and now voluntary retirement and working for MNCs in Bangalore, India. I have vast experience in Administration, Human relation management and facility management.

I have ten years experience in SITEP (ENI partner) and my qualification is Maintenance supervisor

Production supervisor/production operator/ on job trainer

Health, Safety Environment Engineer/ officer &

Geological exploration works including mapping, bulk sampling, drill hole planning, logging and sampling during drilling.

highly motivated exploration geophysicist

Instrument Design Engineer with 4 years of Experience in a world recognized oil and Gas Company JGC-Descon, having experience of Instrument Master Index , JB Wiring, ILD Generation, Main control Panel Wiring, PLC Cabinet Wiring, Main Control Panel Schematics Diagram, HOOKUps, MTO

Structural Cad Detailer, Site Engineer

Co-ordination and inspection of all Quality Control activities like Surveillance of day to day Fabrication, Welding and Erection of Piping and Structural works of Rigs, Co-ordination with clients, Reporting to Project Managers, Coordinating and witnessing of various N.D.T & Destructive testing.

Mechanical Engineer with AWS CWI # 09021281. I have 4.5 years experience in the field of Quality Control and welding inspection in Oil & Gas Projects involving Onshore Pipelines and piping of platforms, Piping of Refineries, process plants. Fabrication of Pressure vessels, Boilers and Heat ex

QMS development and certified lead auditor for ISO 9001:2008

Heavy diesel mechanic since leaving school 20 years ago

Designer having 10+ years of experience in the Electrical detailed engineering on Power Plant, Oil &Gas (Onshore/Offshore) and Petrochemical projects in both Indian & Global projects.

Geologist and mineralogist (double degree, diploma). 1 year experience in mapping, supervision (rig and camp), underground, grass root exploration and production.

ACS800,ACS550,ACS600,ACS1000(all ABB),DCS500,DCS800(both ABB),Drive Window, Winder Soft, IGSS7.0, PL7PRO, UNITY XL,FieldBus,HART,BrainTCP/IP,DH+,DNP,MODBUS

With regard to CAD capabilities, I have over 2 years experience in the following software: Microstation PDS EERACEWAY (3D Raceway Modeling) PDS DRAW (Drawing Manager), PDS PDS-EQUIP (3D Equipment Modeling), Microstation Java 7.1, Orthogen/PDS, AutoCad

40hr hazwoper, Confined Space Entry, Underground Storage Tanks, Industrail Hygeine, Industrail Safety, Lead Abatement, Lead Superviser

Lease Records Administrator with 14 years related business experience in the oil and gas industry.

Experianced Offshore Rigger,Ab seaman,200t captain with USA work Visa

Sr. Piping Design Engineer

Possessed sound knowledge of reservoir simulation and high proficiency in use of reservoir engineering softwares such as Eclipse, Saphir,Peep,Mbal. Possessed an integrated knowledge of well test design and interpretations.

Marine Civil Construction Supervisor

Experienced instrumentation technician able to handle loop-check, termination, calibration of field instruments and devices

Cathodic Protetion Design,ECDA Survey,Soil Resisitivity

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 [ 114 ] 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out