Resume - Experienced Electronics and Communication Engineer for 13 years, performing elec...

Misco Jobs

Resume #46055

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
To work in a prestigious company as Electronic Technician and to apply the solid experiences in the field of electronics and communications.

SUMMARY OF WORK:
Performing electronic and communication engineering task, handling field technical work which includes radio operation, bench troubleshooting, maintenance, installation, testing and commissioning.

WORK EXPERIENCES:
Company: WAHA OIL COMPANY
Tripoli Libya

Department: Engineering
Technical Services/Communication Division

Position: Senior Communication Technician
(Desert Field Based Personnel)

Period: 12 December 1997 to 12 December 2006

Job Description and Responsibilities:
Maintenance and troubleshooting of SCADA (Supervisory Control and Data Acquisition) facilities for both software and hardware used by desert Microwave Radio System

Repair and troubleshooting of AC/DC equipments. ( SCR controlled rectifier, Chargers, Auxiliary Power Supply.(Voigth Haffner, Telco)

Installation of Systronics Radios used by RTU for telemetry system

Outside and inside plant cabling of PBX (Private Telephone Exchange) for both main distribution and subscriber lines.(Mitel)

Local Area network structured cabling

Fiber Optical multiplexer maintenance and trouble shooting(SAGEM)

Installation and maintenance of 2Ghz microwave radios.(BOSCH/MARCONI)

Installation and maintenance of PBX( Private Telephone Exchange)

Installation of UHF/VHF/SSB radios in oil and gas rigs.(TAIT/PAE/CODAN/NIROS/SAILOR/ICOM)

Provide on call assistance to Control Room Operators in isolating communication failure reports.

Installation and maintenance of aviation weather station and communication landing instrument (NDB) non directional beacon and VHF radio system.(VAISALA/SOUTHERN AVIONICS)

Installation of video conference system. (SONY/NEC)

Acting Assistant Regional Area Controller.

Company: METROPOLITAN BANK AND TRUST COMPANY
Lucena City Philippines

Department: Network Communication and Engineering Department
Electronic Data Processing Division

Position: Equipment Engineer
Period: 16 November 1992 to 16 November 1996

Job Description and Responsibilities:

Installation, configuration and maintenance of tellers clustered terminals (Pinaccle Share Processor)

Installation of ATM (Automated Teller Machine)(NCR)

Installation of data communication equipments used by the bank on-line system (modem, multiplexer, controllers)(MOTOROLLA/RACAL/NOKIA)

Installation and repair of UPS (Un-interruptible Power Supply)(SOLA /EXIDE 3KVA/5KVA UPS)

Installation of bank computers and financial software.

Installation and commissioning of bank vault alarm system (Radio Frequency Controlled Alarm)

Company: PHILIPPINE WIRELESS INCORPORATED
Pocketbell Philippines
San Pablo City Philippines

Department: Engineering
Operation /Switching and Transmission Division

Position: Cadet Engineer
Period: 17 July 1990 to 16 November 1996

Job Description and Responsibilities:
Installation and maintenance of long distance paging transmission system(GLENAYRE)

Repair and programming of alphanumeric and voice paging units.(NEC)

Installation of UHF (Ultra High Frequency) and VHF ( Very High Frequency) antennas for remote long distance paging transceiver.(NEC/MOTOROLLA)

Configuration of remote data communication equipments.

Cabling jobs for in-house paging system and medium size telephone exchange.

Acting Asst. Site Supervisor

Company: GIRL SCOUT OF THE PHILIPPINES Restaurant
Port Area Cebu City

Department: Services
(Self Supporting Student)

Position: Restaurant Head Waiter
Period: 01 March 1984 to 01 March 1988

Job Description and Responsibilities:
Customer service and food handling

Responsible for the itinerary and scheduling of co-waiters and daily monitoring of supply inventory.

Acting Assistant Cashier.

EDUCATION: Engineering

College Cebu Institute of Technology
Cebu City Philippines
Bachelor of Science in Electronics and Communication Eng'g.
1983-1988

High School: East Visayan Academy
Talisay Bulacao Cebu Philippines
1979-1983

Elementary: Ocampo Central School
Ocampo Camarines Sur
1973-1979

Examination Taken:
Electronics and Communication Engineering Board Examination- Nov. 1989- Passed

Seminar and Training:
Unix Operating System on December 11-14,1991 conducted by ASSYST COMPANY at Pocketbell Philippines Main Office Cubao Quezon City Philippines.

Preventive maintenance seminar technique for Data Communication equipment and Tellers Clustered Terminal on April 1993 conducted by MBTC Engineers at Metropolitan Bank and Trust Company Head Office Makati city Philippines

Automated Teller Machine preventive maintenance and installation on April 1994 conducted bu NCR Engineer at MBTC Head Office Makati City Philippines.

Microsoft NT Windows Workstation Installation November 1996.

Basic Safety Course(Basic Fire Fighting, Medical Emergency /Personal Survival) (SOLAS) January 20-25-1997 conducted by Maritime Training Center of the Philippines (MTCP). Redo Bldg., 951 Remedios St., Cor. San Marcelino Sts., Malate Manila Philippines.

Installation and Maintenance of 2 Giga hertz microwave radio system. Conducted by Marconi Engineer on April 2004 at Waha Field.

Extra-Curricular Activities:

Member: Institute of Electronics and Communication Engineers of the Phils.

SPECIAL SKILL:
Troubleshooting and installation of electronics and communication equipments
Computer operation
Driving

Character References:
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5051 to 5100 of 15508)

Go to Search Parameters...

Brief Description

Qualified Civil Engineer-total of 16 years of experince in construction industry as Structural Engineer and Design Engineer in the filed of civil engineering and post tensioning of buildings ans bridges

Process Engineer in Oil & Gas Consultancy.

Area of Interest AVO/AVA, Inversion, Reservoir characterisation using Pattern Recognition and Spectral Decomposition and Attenuation.

Completion and workover engineer (11.5 years experience)

Mineral processing engineer, AutoCad drafter and transportation system design

Experience in field development plan, identification of workover requirements, well completion, acquisition of subsurface data, optimization of well performance and project management,

I beleive my strong college degree and work experince in mining, construction and logistics operations will be an asset for any organization.

Over 13 years of professional experience in all facets of highway engineering covering planning, design using MXROAD software and AUTOCAD, including widening of national highways and Expressways. Experience cover route selection of Highways, geometric design, pavement design of pavements etc.

Contract Oil & Gas Technical Writer Twenty years of progressive responsibilities in oil and gas industry.

mapping, remote sensing, exploration, aerial primary data acquisition.

Schlumberger 17 years Coiled Tubing / Nitrogen services/Fracturing

Design and drafting OIl and Gas processign facilities, Structural, Piping, Civil. 7 Years experience with 3D CADWORX modelling on Canadian and international projects. Recently worked on Enterprise's Meeker II facility as well as Green River Gas Plant (PROPAK) early 90's.

Bilingual English-Spanish Project Manager with over 6 years of experience working for diverse industries including the Oil, the light and heavy construction, and the Steel Production.

Smelter expert - ISA smelter; waste Heat Recovery Boiler (WHRB), DM Plant, Electric Arc Furnace, Rotary Holding Furnace (RHF), Converters, Anode furnace, casting wheel and Sulfuric Acid plant.

I would like to apply with your company for the position of a INSTRUMENT SUPERVISOR /TECHNICIAN I have 11 years of oilfield ,gas plant ,power plant and some process plants experience as an SUPERVISOR, TECHNICIAN . I am having good work experiance with clients like ENI , IRAN PHASES 4 & 5 KOC -

Responsible for crude evaluation, expansion project related configuration studies, perspective planning and scenario analysis and retro analysis.

Exploration Geologist

Graduate /Diploma in Computer Application, Tally , Corel draw, Typing Speed @ 40 W.P.M.

I have completed my Masters degree in Chemical Engineering from Lamar University. I have experience in ASPEN PLUS, ASPEN DYNAMICS, HYSYS, PRO-II for two years. I did my internship in Dynamic Engineering Purity Inc. for six months.

mechnical welding and NDT inspector

I am a mechanical engineer and I have been in the OIL & GAS DRILLING profession for past five years as rig mechanic, who is engaged in repair and maintenance of RIG equipments. I have good communication skills as well as great commitment towards work

HYSYS simulations, process design, optimization, Process flow diagrams (PFD) and P&ID

Never give up persom and full of integrity

Presently I am working with M/s B. S. Chaudhry & Co. as a Mud Engineer on E 760-II (1600 HP SCR), M 900-1 (900 HP), M 750 (750 HP), Cardwell-6, & Cardwell-7 since Jan.-2007 to till date continue at Mehsana Asset under MMC contract with ONGCL

M.Tech-Control Systems Engineer with 2 years of Experience in Teaching and Projects Handling

Retain & supervise outside professionals (including attorneys & land professionals) for lease and property acquisitions. „X Negotiate, prepare and administer oil & gas leases, operating, farm-out, and exploration agreements. Build Abstracts of Title. Sharp, innovative, quick learner and have

2 years and 3 months of experience as geologist of underground mine of Au/Ag and the exploration to ore deposits of Au, Ag, Cu and W. All this in my country, México.

Having experience in Mechanical Engineering in the field more than 10 years of Oil and Gas and Manufacturing industries mostly in engineering and inspections. Has worked in INDIA,and SINGAPORE on Onshore & Offshore.

my educational in Highway Engineering has been balanced by actual work experience. I have worked for a leading Infrastructure contractor Arabtec Construction from November 2004 to Jan.2007 and recently I¡¦m working with a leading government authority RTA as Traffic Safety Engineer

over 10 years experience in electronic and over 2 years offshore electrical.

Geologist with strong work ethic & 5 years exprience in Appalachian Basin with a sturdy skill set.

Substation Automation engineer with 5 years of experience

DCS, Control system and Maintenance Engineer

MCA with 2 Years exp in asp.net,vb.net,asp,vb,c#,html,sql,access

Regular visits of unmanned platforms and Taking care of all production / maintenance activities on day to day basis.

I am working as a highway engineer from past 6 years. I have over 3 years of experience with MX design software, 2 years with Inroads one year with Land Development Destok. In my past experience I involved using Indian code, dutch codes and AASHTO codes.

As a Land / Hydrographic Surveyor with 19 years experience covering a variety of harbour surveys, ocean, dredging, engineering, buildings, breakwater construction, jetty construction, roads and offshore construction surveys working with numerous projections and spheroids.

Experienced Consultant Wellsite Geologist with 10 years of International Experience

Project management of a quarry/mining operations.

Experienced Electronics and Communication Engineer for 13 years, performing electronics and communication task which includes bench troubleshooting, repair, maintenance, installation and commissioning. Performing Assistant Supervisory task.

E & I designer

Currently Working with PCPL (PETRONAS CARIGALI PAKISTAN LTD). As a FMC Field & Materials Coordinator

Establishment of Health, Safety and Environment Management function

Higher secondary (Pre Degree Certificate, Kerala University in India) & • Three Years Diploma in Mechanical Engineering (Technical Education Department Kerala, India.)

Seven year experience in HVAC design and maintenance

I am NACE International’s CIP Level 3 (Peer Review) Certified Coating Inspector having over 13 years of experiences in QA/QC Inspection of Corrosion Prevention Activities & Insulation Inspection for Oil & Gas Projects.

Safety Director, Electrical Construction

Over 24 years of extensive experience in progressively responsible positions in the Construction Industry. I speak Russian.

Throughout my 10+ years of technical experience as a Instrumentation and Control Systems Engineer, I have acquired a strong knowledge. I am currently working for Aker Kvaerner in Canada, leading a group of engineers to design 1.443 MMSCFS gas plant located in Iran

Construction Resumé

First Prev 101 [ 102 ] 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out