Resume - I have en extensive experience in detail design and stress analysis of piping sy...

Misco Jobs

Resume #4615

CONTACT INFORMATION:
View contact information...

CURRICULUM VITAE

Senior Piping/Mechanical Engineer

Education:
BSc (Hon) in Mechanical Engineering – University of Indonesia.

Affiliation:
Member of The Institution of Engineers, Indonesia
Registered Professional Engineer at The Institution of Engineers, Indonesia.

Professional Development Certificate:
* Onshore Pipeline Engineering Course by: Dr. Phil Hopkins and Dr. Roger King
* Basic Offshore Safety Induction and Emergency Training Course and Further Offshore Emergency Training Course, by PETANS Ltd, Offshore Survival and Training Centre Bullock Hill, Horsham St. faith, Norwich NR10 3HT, UK

PERSONAL INFORMATION
Date of Birth: 25th August 1966
Age: 37 Years
Marital Status: Married with three children
Religion: Moslem
Nationality: Indonesian
Holder of Work Permit of UK through HSMP Program.

Project Experience:

Onshore Project:
* Duri Area-10 Infield Piping Project (Indonesia) for Caltex Pasifik Indonesia.
* 3rd Dock/LNG Train G Expansion Project (Indonesia) for Pertamina.
* Unocal Salak Geothermal Project (Indonesia) for Unocal Geothermal Indonesia.
* Qatar LNG Plant Project (Qatar) for Qatargas LNG Comp.
* Ammonia and Urea Project (Indonesia) for Petrokimia Indonesia.
* Bandar Abbas Refinery Project (Iran) for National Iranian Oil Company, Iran.

Offshore Project
* OPQL ISND Phase-II Expansion PS-1K Project (Qatar) for Occidental Qatar Petroleum.
* South Arne Development Project at Danish Sea for Amerada Hess, Danish.

Onshore Pipeline Project
* Proposal of Gas Transmission Pipeline Project for South Sumatra for PN. Gas Indonesia.
* Proposal for Feed of Betara Complex Development Gas Project for Santa Fe Indonesia.
* Detail Engineering for 16 inch of Shipping Oil pipeline as part of Duri Area-10 Infield Piping Project for Caltex.
* 24 inch Steam Cross Country Pipeline for Unocal Geothermal Indonesia.

SUMMARY OF QUALIFICATION

I have about 13 years of working at Indonesian Engineering Company (Joint Venture with MW Kellogg and Chiyoda Corp) which runs its business in Oil and Gas project. I am now working Kellogg Brown and Root Asia Pacific Singapore. My strong background and experience is as Piping Design and Stress Analysis of piping and pipeline system, with additional experience and knowledge in Piping Material, and Project Management for various projects starting from LNG project, Petrochemical Project, Geothermal Project and Oilfield Project. In those projects, most of my job was to perform stress analysis for critical lines such as LNG rundown and transfer lines to Ship Tanker, lines connected to pumps and turbines along with all accessories such as design spring hanger and expansion joints, review piping layout to satisfy safety, client and code requirements, design and analyze critical lines at early stage, involved in preparation of plot plant, perform special calculation such as piping wall thickness calculation, safety valve calculation, prepare piping material specification along with piping material class, prepare piping design and stress execution procedure, and design special pipe support, spring hanger, expansion joint and other special items. I am familiar with various design codes and standards such as API 610, API 650, ANSI B31.1, B31.3, B31.4, B31.8, and standard produce by MW. Kellogg, Chiyoda Corp, Brown and Root Energy Services.

COMPUTER SKILL

Stress Analysis Software: CAESAR II, AUTOPIPE (advance)
Piping Design Software: PDS, PDMS, AUTOCAD (beginner)
Microsoft Office: Microsoft Word, Excell, Powerpoint (advance)

WORKING HISTORY

1) KELLOGG BROWN AND ROOT ASIA PACIFIC
79 ANSON ROAD #20-01
SINGAPORE
Assignment:
1. Project: OPQL ISND Phase II Expansion PS-1K Project QATAR (Offshore Project)
Client: Occidental Qatar Petroleum Ltd.
Position: Senior Piping Engineer

2. Project: MCHE Installation Project (Onshore Project)
Client: Brunei LNG Sdn. Bhd.
Scope: EPC
Position: Senior Piping Engineer

Job responsibilities:
* Prepare and review piping stress analysis specification.
* Prepare piping material specification
* Review P&ID
* Extract Stress Isometric drawing from PDMS.
* Perform stress analysis for critical line using CAESAR II such as line connected to Compressor, Turbine, Pressure Vessel, and Pump.
* Review piping layout related to the critical line by using PDMS.
* Review piping layout in term of code and safety requirement.
* Review design of pipe support and prepare the material take off for purchase purposes.
* Design spring hanger and prepare the datasheet for purchase purpose.
* Prepare material requisition for piping material such as pipes, fittings, flanges, valves.
* Prepare Technical Bid Evaluation for pipe, valves and etc.
* Technical meeting with vendor.
* Perform stress analysis for cryogenic lines connected to MCHE Equipment using CAESAR II.
* Perform stress analysis for lines connected to Pump and Turbine using CAESAR II.
* Prepare cold pipe support specification and procedure.
* Prepare standard cold support.
* Perform local stress calculation for trunnions
*
2) PT. INTI KARYA PERSADA TEKNIK INDONESIA,
Local company joint venture with MW. Kellogg, Houston and Chiyoda Corp, Japan during execution of projects.
DURATION: FROM NOVEMBER 1990 – MARCH 2003
DETAIL:
DECEMBER 1999 – FEBRUARY 2003

Project Engineering Manager
Project: INFIELD PIPING PROJECT INDONESIA
Client: PT. CALTEX PACIFIC INDONESIA
Project Value: US $ 30 million
Scope: Engineering, Procurement and Construction (EPC)
Job Responsibilities:
* Coordinate all engineering activities consist of piping, civil, mechanical, instrument and control system, electrical, process, and plant services.
* Prepare project engineering execution plant, and others procedure that normally use during engineering execution such as review and approval procedure, design change procedure, etc.
* Prepare hydrostatic test, pigging test, and pre-commissioning procedure.
* Review and approve all the procedures prepared by discipline or department.
* Review calculations perform by piping stress and civil group.
* Review bid tabulation for all materials to be purchased before release to procurement division for purchasing purposes.
* Act as Deputy Project Manager to handle all technical matters and assist Project Manager in handling all procurement matters, quality matters, and control of project.
* Communicate with Client Project Manager and Project Engineer on behalf of Project Manager to resolve any problem encountered during project execution and to discus any change of work or additional work given by Client.
* Attend e monthly meeting with Client at Site to monitor the progress of project including construction.

AUGUST 2002 – DECEMBER 2002
Lead Piping/Pipeline Engineer
Proposal: Gas Transmission and Distribution Pipeline for South Sumatra
Responsibilities:
* Prepare technical aspect of Onshore Pipeline Design such as pipeline routing, pipeline design consideration such as substance and location classification, pipeline protection, material selection, method of construction, stress analysis and cathodic protection,
* Prepare preliminary pipeline routing and MTO.
* Prepare procedure for engineering execution and commissioning procedure.
* Prepare final wrap up of proposal.

JANUARY 1998 – NOVEMBER 1999
Senior Piping Engineer/Stress Engineer
Project: 3rd DOCK/LNG TRAIN G EXPANSION PROJECT, BONTANG INDONESIA
Client: PERTAMINA INDONESIA
Project Value: US $ 250 million
Joint Venture with CHIYODA CORP, JAPAN.
Scope: Engineering, Procurement and Construction (EPC)

Job Responsibilities:
* Review P&ID and piping layout in term of stress analysis purposes.
* Perform stress analysis for LNG Transfer Line and Loading Arm to the Tanker, which had 5 conditions to represent the actual condition when the LNG is transfer into the Ship.
* Perform Stress analysis for LNG circulation line from Loading Arm at Ship.
* Perform Stress analysis for lines around LPG Tank
* Review Material Requisition for Piping Valve and any bulk material.
* Prepare technical document to design expansion joint as many as 118 pieces of expansion joint for LNG line with size as 30 inches.
* Communicate with Client Deputy Project Manager regarding the technical aspect of these 118 expansions joint.
* Communicate with Vendor (PATHWAY) about the design aspect and review all the technical aspect of the expansion joint.

JANUARY 1998 – APRIL 1998
Senior Piping/Pipeline Engineer
Proposal: Feed for Betara Complex Development for Santa Fe.
Responsibilities:
* Prepare technical specification for Gas pipeline from gas plant to main back bone pipeline system.
* Design, analyse and prepare pipeline layout for the gas lines.
* Perform study of the pipelines based on ASME B31.8.

FEBRUARY 1997 – DECEMBER 1997
Senior Piping Engineer
Project: South Arne Development Project at Danish Sea
Client: Amerada Hess
Scope: Engineering, Procurement and Construction (EPC)
Seconded at Brown and Root Leatherhead, UK.

Job responsibilities:
* Perform stress analysis for lines around Pump, Pressure Vessel, and Compressors.
* Review piping layout in term of stress analysis purposes by using PDMS.
* Prepare Bid Tabulation for piping valve material to be purchased.

AUGUST 1995 – NOVEMBER 1996
Lead Piping Stress Engineer/Specialist
Project: SALAK GEOTHERMAL EXPANSION PROJECT.
Client: PT. UNOCAL GETHERMAL INDONESIA
Project value: US $ 250 million
Joint Venture with: Fluor Daniel Inc.
Scope: Engineering, Procurement and Construction (EPC)
Seconded at Fluor Daniel Irvine, USA.
Job Responsibilities:
* Perform Basic Design at Fluor Daniel office at Irvine California for Power Plant using Geothermal Energy including transfer Geothermal from wells to the Power Plant.
* Involved in study and preparation of Plot Plant for Power Plant and Cross Country Pipeline.
* Perform preliminary stress analysis for Hot and Critical Lines for further consideration.
* Review all stress analysis calculation for critical lines
* Design spring hanger, prepare the data sheet.
* Design special pipe support and prepare the Material take Off for purchasing purposes.
* Conduct site survey and site supervisor for Piping cross country line and power plant.
* Involve in monthly meeting with project management and client.
* Solve any problem during construction as Field Piping Engineer.

JULY 1994 – JULY 1995
Deputy Lead Piping Engineer

Project: QATAR LNG PROJECT at QATAR
Client: QATARGAS
Project Value: US $ 500 million
Joint Venture with CHIYODA CORP, JAPAN
Scope: Engineering, Procurement and Construction (EPC)

Job Responsibilities:
* Prepare piping design and stress specification, piping material specification and pipe support specifications.
* Review piping layout and equipment layout.
* Review Piping Material Take Off and prepare material requisition.
* Prepare Technical Bid Evaluation for Piping Valves and Fittings.
* Perform stress analysis for LNG (Cryogenic)and Sea Water Lines
* Calculate Loading at pipe support and structure to be given to the structure group.
* Design Special pipe support to handle as many as 220 ton horizontal load.

MARCH 1991 – MAY 1994
Piping Stress Engineer
Project: AMMONIA and UREA PROJECT at INDONESIA
Client: PT. PETROKIMIA GRESIK
Project Value: US $ 250 million
Joint Venture with: MW. Kellogg, USA and Toyo Engineering Corp, Japan.
Scope: Engineering, Procurement and Construction (EPC)

Job Responsibilities:
* Perform loading data calculation for load of pipe at structure, pipe rack and sleeper.
* Perform stress analysis for lines around pipe rack, pump and pressure vessel.
* Perform stress analysis for critical lines at Turbine and Compressor, Boiler and steam line.
* Design special pipe support and indicate standard pipe support at piping drawings.
* Design spring hanger and the data sheet.
* As Piping Supervisor at construction work, to solve any problem during construction in term of stress matter.

NOVEMBER 1990 – MARCH 1991
Junior Piping/Mechanical Engineer
Project: Bandar Abbas Refinery Project at Iran
Client: National Iranian Oil Company (NIOC)
Joint Venture with CHIYODA CORP, JAPAN
Scope: Engineering, Procurement and Construction (EPC)

Job Responsibilities:
* In house training for piping design, piping stress analysis and pressure vessel design
* Perform loading data calculation for load of pipe rack and sleeper.
* Perform stress analysis for lines around pipe rack, pump and tank.
* Design special pipe support and indicate standard pipe support at piping drawings.

OVERSEAS ASSIGNMENT

* FLUOR DANIEL Inc, IRVINE, CALIFORNIA, USA.
As Piping Stress Engineer, assigned for SALAK GEOTHERMAL PROEJCT at Indonesia. The office of project execution was at Fluor Daniel's office at Irvine California, USA in 1995.
* BROWN AND ROOT, LEATHERHEAD, UK, as Piping Stress/Mechanical Engineer, assigned for South Arne Development Project (offshore project). The office of execution project was at Leatherhead, UK, in 1997.

TRAINING AND COURSE ATTENDED

* ASME Piping Codes and Piping Stress Analysis Course
Lecture: Dr. Quy Truong PE, from MW. Kellogg Houston, USA.
October 1995, at Jakarta Office.

* Material Engineering and Fatigue Analysis Course
Lecturer: Dr. Ir. Adnyana and friends from BPPT Indonesia
21 November – 13 December 1994, at Jakarta Office.

* Onshore Pipeline Engineering Course
Lecture: Dr. Phil Hopkins and Dr. Roger King
8 – 11 May 2000
JW. Marriot Hotel
Kuala Lumpur, Malaysia

* Basic Offshore Safety Induction and Emergency Training Course and Further Offshore Emergency Training Course, (3 days)
PETANS Ltd, Offshore Survival and Training Centre
Bullock Hill, Horsham St. faith, Norwich NR10 3HT, UK

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7201 to 7250 of 15512)

Go to Search Parameters...

Brief Description

I have a Mining Engineering Degree and presently attending school at the University of Phoenix to obtain a MBA - Technology Management. My background encompasses supervision/management and project engineering while at BHP Copper (Magma Copper Co) in San Manuel, Arizona.

I have en extensive experience in detail design and stress analysis of piping system for LNG Plant, Petrochemical Plant, Oil Refinery Plant, and Geothermal Plant for both Onshore and Offshore Project for more than 13 years as Senior Piping Engineer/Senior Pipe Stress Engineer.

I have extensive overseas experience in management positions. I adapt well to different cultures and remote locations. I am a team player and give 100 percent effort at all times

Meticulous Financial Professional with exceptional private and public business analysis skills. Goal-Oriented Decision Maker with proven ability to secure competitive advantage. Outstanding Communicator and Team Builder with working knowledge of English and Mandarin.

A results orientated “can-doer”; outstanding leader and team worker; driver and manager of change; excellent commercial acumen; highly experienced in resource sector business improvement and commercial project / supply chain management roles; MBA with Merit (Newcastle NSW). Experienced expatriate.

Interested in Construction jobs.

QUALIFICATIONS: BE(FIRE ENGINEERING)&POST DIPLOMA IN INDUSTRIAL SAFETY SSC&HSC,BSC(PHYSICS)&COMPUTERCOURSESALLINFIRSTCLASS. EXPERIANCE:13 years ASFIRE ENGINEER IN IPCL(petrochemical corporation india)&presently as dy.fire service manager.AGE:43 years. NATIONALITY: INDIAN.GULF EXPERIANCE:NIL.

Planning Engineer/ cost controller using Primavera P3 Construction Experience as Project engineer

My area of expertise is in Clastic Diagenesis. I have a background in sedimentology, sedimentary petrology, and geochemistry. My graduate work was expanded to include courses in environmental aqueous geochemistry and hydrology.

I'd got a bachelor's degree in the major of applied chemistry with about 13 years experience

10+ years experience including supervisory experience in the process/ manufacturing industry. • Excellent interpersonal skills • Quick to learn and willing to take on new challenges.

my main work to covering all business regarding with the naturally occurring radioactive materials NORM ( radiation protection supervisor)-supervision, remediation, planning,.........

Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants.

Seeking a position as an Instrumentation and Control/Electronics engineer in design, development, project and maintenance

A highly qualified & skilled Environmental Engineer, working in a major Petrochemicals Industry for 13+ years. Perform/Responsible for ALL aspects of Environmental Management System related to big-size Petrochemicals Complex. In addition, also exposed to various activities of ‘HSEF dept’.

I am post graduate in HR & 15 yrs of experience in Administration & HSSE

I am geologist specialising in Rock Mechanics. Well versed with RocK Mass classification and support design. Numerical modelling on Flac 3d with very good results.

A self-motivated hard working individual with a wide range of experience and knowledge including time spent in the Middle East. Has operated within teams and as an individual and is accustomed to dealing with staff at all levels. Easily adapts to new environments and quickly learns new systems.

Over 14 years of experience as a manager, supervisor and technical expert. Broad experience in administration, project management, techno-economic analysis, design, construction, operating both within the organization of an investor owned gas company and on various international assignments

Career Summary: 17 years Electrical/Instrument experience including full apprenticeship and technical trade certificate in Electrical Engineering. Strong international background specialising in Construction/Commissioning/Supervision of projects within the Power Generation, Petrochemical, Mining etc

Shotfirer 11 years Experienced in quarrying, hard rock gold mining, open cut surace mining.

plc,scada,dcs,drives

Design Datasheet ,Loop drwg, Hook up & Inst cable Schedule, Routing,&,Basics in IN tools and SAP -EDMS

I am Vasanth Sastri S. from Singapore, I am a B.E(EEE) graduate 2007 passed out batch, I am having two plus yrs of experience in programming of various Modicon PLCs, testing and exposure and Detail engineering. I enclosed my updated CV for your consideration.

I have 8 years experience in instrumentation maintenance and shut down jobs activities in oil and gas field

Newly Graduated Civil Engineer with over experience

I'm a diploma holder in Chemical engg with total 8 years of experience in Oil & Gas field, I had worked for 5 years in Relaince Industries ltd in Refinary tankfarm, 1.5 years in ESSAR oil ltd in Refinary tankfarm & presently working in SHELL's LNG terminal at hazira, surat since Oct-2007,

To perform proper line- ups of piping, pumps, valves, manifolds, and tanks for loading & discharging

Electrical Engineer (Specialized in tendering, BOQs, RFQ, etc)

Certified Prince2 practitioner with experince in managing Construction Projects. Bsc.Quantity Surveying Experinced in quantity surveying practice and CAD technology skills and Microsoft Office Packages Particularly Excel And MS project

Oil and Gas Operator with 8 year experience

Project Engineering and Management.

I have excellent communication skills, adept in preparing business correspondence, very good in documentation and with administration experience

Free! Highly skilled & self-motivated with a total of 33 years of progressive responsibility in the Oil Drilling industry. Valuable experience acquired working in Libya and Mexico and in the jungle of Guatemala.Well-organized, precise,dedicated to work projects with the proven ability to motivate staff.

Production engineering graduate having 17 years of experience at management level in large diameter submerged arc welded pipe mill (longitudinal and spiral pipe mill ) as well as for anti corrosion coating pipe mill in India and abroad from green field stage to profit m

Intensive experience in heavy equipment workshop management,in service at Caterpillar agency and in client requests for repairs and implementation of warraty.Awarded "Man Of The Year in 1997 by Caterpillar Switzerland.

I have completed 3 years diploma of Associate Engineering in mechanical technology from Punjab Board of technical Education Pakistan.

I am a B.Tech Instrumentation and control Engineer having good level of knowledge in the field of instrumentation and control,process control,programming, PLC’s, SCADA and DCS. I worked in biomass power plant as junior Instrumentation engineer for 1year and as trainee engineer in CIMAC for 5 month

Free! I am highly motivated individual with exposure to field and office projects. Competent user of various geologic software and mapping techniques. Efficient, result driven and Work well in team atmosphere.

Supervision of piping related activites,co-ordination ,hydotest package clearance and final review with clients.co-ordination with other dept for related works

Shipping & Receiving

To obtain an entry level position in the computer drafting and design field utilizing my education and skills with an expanding and dynamic company.

Mechanical maintenance management expert with experience on control systems and I/O devices. Training preparation and delivery experience. Planning experience. Troubleshooting experience. Management experience. CMMS, RCFA, and FMEA experience.

HD fitter, Experience on sandvik mining equipment, skilled at hydraulic and electrical trouble shooting.

Senior Geophysicist, Petroleum Negotiator

Seasoned construction manager with over twenty years of progressive experience in commercial and industrial construction on both U.S. and worldwide projects in the following industries: Automotive, Semiconductor, Chemical, Cogeneration, Commercial Building, Food and Beverage, Institutional, Hospita

OBJECTIVE: A position as Mechanical Engineer (Basic/Principle Design, Estimation, Tendering & Procurement)

A committed and dependable team player with extensive offshore operations/commissioning experience and onshore construction / commissioning experience

Expertise in sizing, correct selection, design base document, specifications/data sheets, material requisition for inquiry/purchase, technical & commercial evaluation & recommendation, design review & approval and witnessing tests of Rotating Equipment (Gas / Steam Turbines, Positive Displacement

Reservoir simulation, welltest (onsite support & interpretation).

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 [ 145 ] 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out