Resume - Operation Drilling Engineer - Drilling Superintendent

Misco Jobs

Resume #46515

CONTACT INFORMATION:
View contact information...

Operation Engineer & Drilling Superintendent

CONSULTANT HISTORY

25/09/06 – SITE DRILLING ENGINEER
CARIGALI HESS (PETRONAS) - Offshore
Jack Up site engineering support.
Shallow Gas, H2S, C02
Appraisal drilling campaign conventional wells and HP/HT gas well. (10000 psi – 400°F)..
Stand alone well. Casing drilling operation.
Populate performance tracking system, lessons learnt.
Monitor pore pressure prediction.
Provide technical engineering support for operation and HSE.
Implantation of Carigali Hess standarts.
Debriefing of drilling operation, recover necessary data for the end of well report.
BHA configuration optimization
DRILLING ENGINEER

CARIGALI HESS (PETRONAS) – Base Kuala Lumpur
SDI Preparation HP/HT gas wells. (10000 psi – 400°F).

28/05/06 – 25/09/06 Drilling Superintendent
TOTAL INDONESIA - base
Jack Up superintendence and new campaign preparation.
Shallow Gas.
Well exploration preparation.
Pre-drilling development prior production platform installation.
High deviated development conventional gas wells (Mud Line Suspension) with heavy losses and hole stability issue.
Services and Materials Procurement.
Use of Baker Autotrack technologies.
BHA configuration optimization
Hole cleaning and T&D implementation.
Rig moving preparation.

EMPLOYEE HISTORY

28/06/05 – 28/05/06 Operation Engineer & Superintendent
TOTAL INDONESIA - base
2 Jack Up superintendence under heavy SIMOPS progress.
Shallow Gas.
High deviated development conventional and Splitter gas wells.
Gas wells project with Mud Line Suspension preparation.
Tubingless project preparation.
Services and Materials Procurement.
CFT follow up. FAT.
New design Wellhead Partition Plate study/optimization (splitter)
BHA configuration optimization
Drilling operation failure/anomaly analyses.
Hole cleaning and T&D implementation.
Method (SIMOPS, Matrix, JRA, CR implementation & follow up).
Rig moving preparation.

17/01/04 – 27/06/05 Senior Drilling/Completion Supervisor
TOTAL INDONESIA - Offshore
Jack Up supervision under heavy SIMOPS progress
Shallow Gas
High deviated development conventional and Splitter gas wells.
Use of Anadrill Power drive & Baker Autotrack technologies.
Hole cleaning improvement: trouble shoot Pack Off anomalies: 3 days of rig saving time by well.
Tripping mode improvement: trouble shoot Wire Line operation anomalies (differential sticking): 1 days of rig saving time by well.
T&D implementation.

26/07/03 – 16/01/04 Senior Trouble Shooter Supervisor
TOTAL INDONESIA - Offshore
Jack Up & Swamp Barge supervision
Shallow Gas
Kick Intervention/Well control (gas).
Coiled tubing operation.
Use of Anadrill Power drive technologies.
SIMOPS (Simultaneous operations).
Running completion.
Deviated development conventional and HP/HT gas wells supervision (10000 psi).

07/01/02 – 25/07/03 Ifp/Enspm School (French Institute of Petroleum)
TOTAL INDONESIA - Offshore
Preparation of Engineer's Diploma in Oilfield Development & Exploitation.
Preparation of Master of Science degree in Petroleum Engineering and Project Development.

06/08/01 – 06/01/02 Senior Drilling Supervisor
TOTALFINAELF UK - Offshore
Jack Up supervision.
Deviated development HP/HT gas wells. (15000 psi).
SIMOPS (Simultaneous operations).

15/02/01 – 05/08/01 Senior Drilling/Completion Supervisor
TOTALFINAELF CONGO - Offshore
Tender supervision.
Horizontal development - Oil wells.
ERD development - Oil wells.
Use of Anadrill Power drives technologies.
SIMOPS (Simultaneous operations).

29/05/99 – 14/02/01 Senior Drilling/Completion Supervisor
TOTAL YEMEN - Onshore
Horizontal development oil wells.
Use of foam mud technologies.
Open hole reservoir clean up with ENZYMES Fluid solution.
Vertical & horizontal water wells injectors.

03/06/97 – 28/05/99 Drilling/Completion Supervisor
TOTAL ARGENTINA - Onshore
ERD development - Oil wells.
Drilling 8 record breaking extended reach wells under the sea from the eastern coast of Tierra del Fuego Argentina, 4 of which are amongst the 8 maximum reach wells ever drilled in the world.
This includes the well CN 1, present world record with 10 585 m horizontal departure and 11184 m measured depth. Those wells include a 1000 m plus horizontal drain demanding extremely challenging geosteering in a thin sandstone reservoir with state of the art geosteering technology.
The rig is a super heavy National 1625 rig, upgraded (power, pit volume, mud treatment, high torque top drive, heavy drags, etc) for this project.
Hole cleaning and T&D implementation.
Use of Anadrill Power drives technologies.
SIMOPS (Simultaneous operations).

04/02/97 – 02/06/97 Drilling/Completion Supervisor
TOTAL ABK (UAE) - Offshore
Drilling a multi-drain horizontal well.

18/05/96 – 03/02/97 Drilling/Completion Supervisor
TOTAL SIRRI (IRAN) - Offshore
Jack Up supervision.
Drilling deviated delineation wells.
High pressured (mud density up to 2.30 SG) with heavy losses, 5 casing programs
1000 m horizontal drain in a highly productive reservoir. High rate DST's.

21/05/95 – 17/05/96 Electrician On Gas Power Plant
ELF AQUITAINE - Onshore
Works in hazardous area.
Electric consignment.
Surveillance and intervention on high voltage installation 20/63 kV.

10/03/94 – 20/05/95 Work Over/Completion Supervisor
ELF CONGO - Offshore
Senior Completion Supervisor
Completion on horizontal well from jack up.
(Liner screen/PKR/Electrical pump)
Operation performed with THIXSAL mud (Over-saturated salt mud with calibrated salt used like plugging agents in oil reservoir)
Drilling Supervisor
Work Over & Completion on double oil/gas production wells (deviated or horizontal wells).
Operation performed from drilling boat with dynamic positioning.
Snubbing Unit.
SIMOPS (Simultaneous operations).

17/12/93 – 09/03/94 Drilling/Completion Supervisor
ELF GABON - Onshore
Drilling horizontal well in oil productive reservoir.
Running completion (liner screen/PKR/Anchor/Gas Lift)

16/12/91 – 16/12/93 Oilfield And Drilling Courses
ELF AQUITAINE - France
IFP courses (French Institute of Petroleum) on 2 years.
Training in work-over, completion and drilling operations.
SEDCO FOREX Modules.
FloorMan to Driller Position in two years.

23/10/89 – 28/06/91 Agent Of Maintenance In Automatism (Apprenticeship)
EURIAL - France
Industry of transformation and marketing of milk.
Creation or modification of robot program on production unit.
Debugging of robot program.
Program creation for regulation and economy of energy on cooler power unit: 20% of economy.

07/07/89 – 31/08/89 Training Period In Maintenance (Apprenticeship)
Defontaine - France
Industry in metallurgy.

ACADEMIC DIPLOMA & DEGREE
Higher Education:
Master Of Science Degree (Petroleum Engineering And Project Development) Paris 03/02/04
Engineer Diploma (Oilfield Development & Exploitation) Paris 03/02/04
Bts Diploma (Industrial Mechanics And Robot – Option Mai) Nantes 02/07/91
Bac Diploma (Electromechanical – Option F3) Nantes 07/07/89

SECONDARY EDUCATION:
Bep Diploma (Electromechanical Option) Nantes 22/06/87
Cap Diploma (Electromechanical option) Nantes 24/02/87

PROFESSIONAL CERTIFICATE, ABILITY & COURSES
Certificate Mentoring Program Indonesia Department of Energy 1 week Balikpapan 02/12/05
Certificate IWCF #6 - Subsea Option IFP (French Institute of Petroleum) 1 week Pau 14/10/05
GSES Certificate (Safety and Environment) TOTAL (internal course) 4 days Balikpapan 23/09/05
RGIT Certificate (Offshore survival emergency) MONTROSE Center 3 days Aberdeen 21/09/01
H2S Ability TOTAL (internal course) 1 days Congo 20/07/01
RSES Course (Safety and Environment) TOTAL (internal course) 4 days Lacq 27/03/01
Cause Tree Analyze course TOTAL (internal course) 1 week Paris 31/03/99
RSES Course (Safety and Environment) TOTAL (internal course) 4 days Paris 24/03/99
High/Low electrical voltage Ability APAVE (intervention & consignment) 2 weeks Billière 21/06/95
Electric installation conception course MERLIN GERIN 1 week Boussens 30/06/95
Oilfield and drilling courses IFP/Sedco Forex 2 years Pau 01/92 - 12/93
Including:
Certificate «Electrician module» SEDCO FOREX Modules Pau 15/11/93
Certificate «Driller module» SEDCO FOREX Modules Pau 15/04/93
Certificate «Assistant driller module» SEDCO FOREX Modules Pau 15/01/93
Certificate «Introductory module» SEDCO FOREX Modules Pau 15/02/92
Certificate «Safety module» SEDCO FOREX Modules Pau 15/02/92
Certificate «Crane operator 1 module» SEDCO FOREX Modules Pau 15/04/92
Certificate «Crane operator 2 module» SEDCO FOREX Modules Pau 15/04/92
Certificate «Mechanic modul» SEDCO FOREX Modules Pau 15/06/92
Certificate «Derrick man module» SEDCO FOREX Modules Pau 15/11/92
Practicum practice and survival in sea course Sailor fireman 1 week Marseille 23/10/93
Fire fighting course Fireman of LACQ 3 days Lacq 28/10/93
Certificate "Drilling technician" IFP (French Institute of Petroleum) 5 weeks Paris 03/09/93
Certificate "Drilling technical basement" IFP (French Institute of Petroleum) 4 weeks Pau 17/07/92
Linguistic English courses SFE (Elf Formation Center) 3 weeks Pau 16/12/91

LANGUAGES
Fluent in French, English and Spanish.
Initiation to the Vietnamese language.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7051 to 7100 of 15509)

Go to Search Parameters...

Brief Description

I want to improve my skill and knowledge, get good experiences about exploration and production,Drilling Prosses (Over Balance and Underbalance Drilling System), surface production facility and processing plant including Sulfure recovery unit (SRU),Back pressure Valve for safety Rig Drilling and wor

ERP, Consultancy, Movex, HumanResources Implementation, Payroll Implementation, Managment, Consulting Services, Independent

Expertized in Project management, Implementaion of Policies and Proficient in MS Office, Completed MBA(Management Information System)

I have been working infield of structural Design since last Eight years-using modern technologies and software. I done RCC , Steel & Precast Structures in commercial, residential & industrial Area

M.Sc. Geologist, looking for a job in oil industry

I am a conscientious, reliable and hard working person, capable of fulfilling responsibilities, following instructions accurately and working under pressure to tight deadlines. I get on well with other people and I am a supportive team player. I have 11 years extensive experience of work in accounti

Electrical Design, Feasibility Study, Safety Audit, Procurement, Installation, Punchlisting, Commissioning / Start-up & Maintenance Experience in Oil & Gas (Petroleum Refinery) Industry - Project & Maintenance Departments

Rotating equipment Engineer, 12 years of experience in petrochemicals plant(Polypropylene plant experience spheripol & novolen technology)

Presently Working with Samsung Engineering in Seoul Head Office as Lead Project Controls Since Nov 04 Trend/TIC program Implementation Contracts Management & Control

Do all activities of SHE for all units running at the refinery such as safety committee, HAZOP studies, EIA, Inspections, Audating, work permits

I hold a bachelor of Mining Engineering (Hons) degree from the University of Leeds in England and a Masters of Business Administration (MBA) degree from the Copperbelt University here in Zambia. My working experience spans over a period of 10 years i.e. 9 years in mining and 1 year in the financial

Analysis Estimation-Officer 10 years as operations engineer in power plant

HSE, H2S, Fire fighting, Fire protection, Inspection, Rig or Plant, Off or on Shore

Electrical Engineer, Transformer especiallist, excellent project management, supervised High Voltage test field project C$ 20 M, excellent computer skills including networks administration

Master Qualified Instrument Engineer with 10 years experience of detailed design engineer

Working as Mechanical Maintenance Supervisor.

Summary of Experience

Masters Degree in Metallurgical Egg with Specilisation in Welding Egg. Prepare, Review & Approve Welding Procedures as per various Codes / Standards. API 510 Pressure Vessel Inspector.· Trouble shooting of welding and related issues.

Inst. Engineer with 13 years Inst. Design experience in the field of Oil. Petrochemical Refineries. Attended FAT/ SAT, Hazop etc.

Seeking professional or technical employment in Software Engineering, Computer Science, or Web Development. Offering extensive education and experience in computer science and mathematics.

Operation Drilling Engineer - Drilling Superintendent - Drilling/Completion/Work Over Supervisor

30 + years in Security and Law Enforcement. Extensive management experience having worked in several positions throughout the world

The past ten years in the construction industry has been most fruitful and challenging as I have found that supervision work includes duties of engineers,architects & contractors at times, from co-ordinating M&E & Architectural activities down to helping the main contractor to arrange meeting with c

Construction Manager / Superintendent /Commercial

Project Manager/ Superitendent/Estimator

PDS, CADWorx, Rebis AutoPlant

HSE Officer

24 years exp. oil and gas manufacturing, machining, repairing, rebuilding of all components of drilling and service rigs. Also gas plant experience. Have a red seal machinist ticket acquired with a grade 12 education at the northern institute of technology, Edmonton Alberta Canada.

A senior Process Analyzer Specialist with twenty – five years of experience in the Petro Chemical Industry. Strengths include: design work, upgrades, start–up assistance, works to meet tight deadlines and budgets; pays close attention to detail.

Fully experienced in all aspects of maintenance of oil and gas production facilities, hands on experience of major overhauls of rotating equipment which includes operation of GE frame 5 Gas turbines.Responsible for supervision of all disciplines to ensure safe and efficient maintenance proceedures.

About 10 years experience working for Copper and Cobalt mine. Experienced in both underground and Openpit minig methods. Proficient in the use of datamine mining software, and I'm conversant with both underground and opepit mapping

Exploration Geologist, Geologist, good in Mapping, drill crew supervicing, Diamond and RC core logging, trainning of local field assistants and field technicians, office management and administration, map production, report writing

I m B. Tech. in Bitechnology working as Mud Engineer

Professional Qualified Accountant-CPA(K), Diploma in HR Management holder & have a hands on experience in Fund Accounting . I am a team player, work with minimum supervision, dependable and expert of high integrity. I have hands on experience in Computerized Accounts i.e QuickBooks & Sage

I am working as a Plant Inspector with AIB-Vincotte International ltd. I am involved in inspection activities in Petroleum sector for the last 11 years, am well familiar with most of International codes and standrards such as API, ASME, BS, ISO etc.

reated designs for electrical equipment, conduit, and cable in power plants. created equipment schedules, conduit schedules, and cabling schedules to be used in the field. also created wiring lists to keep track of cables and wiring documentation in excel format and gsn

20 years of project management, EPCM international experience in Oil & Gas. On shore, chemical, petro chemical, LNG, power plants, offshore platforms, from inception of project through design to built up & close out. Cost estimation of global tenders of capital projects,.

I'm a Mechanical Engineering Graduate with vast experience in oilfield static and rotating equipment operations and process drawings

INSTRUMENTATION ENGINEER EXP. IN OIL&GAS FROM SAUDI ARAMCO PROJECT

Able to operate and maintain well and familiar with typical oil / gas production flowing well, Sub Sea Well and Gas lift well.

Rotating Equipments : Centrifugal Pumps, Split Casing Pumps,Sea water pumps Steam Turbines, Gas Turbines, Reciprocating Compressors, Turbo Compressors, Rotary Feeders, Lobe Blowers, Conveyer Belts ,Diesel Generator ,Hydraulic pump, High pressure piping, valves, High pressure water tube boiler, Heat

I have worked as Mudlogging Geologist in Baker Hughes Inteq For two years, For detail View my CV

The above given details are true to best of my knowledge & if any wrong I agree to do your needful.

B.E. graduate with more than 2 yrs of experience in Primavera and IT

Mechanical engineer having more than 2 years of experince in mantanance of underground mining machineries in coal and metal mines .

Driller

Piping design engineer (pdms) with 2+ years exp.

BE MECHANICAL WITH POST GRADUATION IN PIPING ENGINEERING, PDMS,AUTOCAD 2004

More than 8 Years of experience in the field of ELV System specialist well versed in Installation testing and commissioning of systems Including Building management system, CCTV System, Access Control system , Structured cabling etc..Having gained extensive experience as a team leader in execution

Working for Schlumberger oilfield services as Directional Drilling Engineer in Republic of Yemen

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 [ 142 ] 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out