Resume - Senior technician instrument

Misco Jobs

Resume #46731

CONTACT INFORMATION:
View contact information...

Free of the Military draft and all engagement I-TRAINING
my schooling its bac+3 years
1-bachelor in electronic1990
2-DEUA in electronic option industrial control 1995(diploma academic study apply)annaba university
3-training for DCS system SAIA and bohimia instrument in Czech republic
4-trainaing for DCS system for siemens materiel schematic S7-400
II-1PROFETIONNAL EXPERIENCE
09 years working as senior instrument technician option automat and control in thermic power plant with 2*137 MW in maintenance department in sonelgas( Algerian company of electricity and gas) (1998 to the present )
II-2TASK OF WORK
-Calibrate all instruments transmitter analog and digital.
For analog transmitter:
* flowmeter, pressure, temperature, level, differential pressure for flow or level, and thermostat Of control temperature good knowledge all sensor of temperature type K?J,T……pt100,Rtd
CONTROL TURBINE AUTOMAT:
*good knowledge DCS system MARK6 and Honeywell bohemia(skoda)
*good knowledge benthly Nevada profess ad schunck for machine motoring system
*control daily for DCS system and mark6
*control the reliability of sensor, valves and module
* Control oil lubrication (temperature and filter)
* Control power generator in comparison with steam flow
*Control temperature of generator and hydrogen control differential of temperature metal turbine HP,MPand LP
High pressure, medium pressure and low pressure
* System Modular Redundancy (TMR *control hydraulic,pneumatic valves if it's doubt position or an break Dow system
Adjustment all sensor of vibration saff or absolute vibration and control measure line between Bentley Nevada and mark 6
Control speed and over speed of turbine
Familiar with Programmable Logic Controller (PLC) CONTROL BOILER
In control boiler it necessary to control some measure line:
Control combustion: flow gas –flow air
Control level for cover warmly
Control temperature steam
Control flow water in comparison with flow water and flow gas
Control reliability for DCS system soft and hard
- Maintenance, troubleshooting and repair gas and steam turbines instrument such: bohemia Mark 6 and SIEMENS DCS and skoda Bentley, Nevada, Honeywell and rozmoond transmitters, analyzer hydrogen system's and instrument of water post.
- Install all instrument and check and control all physical parameter and their sensor (level, pressure, flow, temperature, vibration and rotational speed) calibration, troubleshooting, repair.
-Ability to Interpret design/drawings, -Install, dismantle, troubleshoot/analyse calibrate, modify, all electronic/pneumatic/hydraulic open and closed loop control systems. -Senior instrument analyser
I'm working also in chemical process for treatment's water such as:
-Electrolyser for hydrogène
-Analyser for oxygen in combustion room
-silice meter
-Conductivity meter
II-3PROFETIONNAL EXPERIENCE -1995/1996 electrician in LNG sonatrach (Algerian company of gas) work task install all instrument and DCS
II-4 TASK OF WORK -Ability to Interpret design/drawings, diagram -Install, dismantle, troubleshoot/analyse calibrate, modify, all electronic/pneumatic/hydraulic actuator, activer and positioner III- VARIOUS -Good inter personal team
-apt to work in astreint system
-Apt to work in anther regime
-Dynamic for find and repair all problem
Knowledge in Computer Applications
- Microsoft Word
- Microsoft Excel
- PowerPoint
Language Skills
- French: writing, reading (freelance).
- English: writing, reading.
- Arabic: freelance.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7601 to 7650 of 15497)

Go to Search Parameters...

Brief Description

Inspection and laying of PE gas line in Mumbai for Mahanagar Gas Ltd (MGL) and Inspection of painting and coating of steel structures in offshore.

I am a geology masters student at Baylor University (May 2009 graduation). My training has included all of the basic geological branches with focus on sequence stratigraphy, depositional systems (both carbonate and clastic), and isotope geochemistry.

During 19 years, I have gained some practical field experiences & knowledge as a construction civil engineer/ manager which includes, projects construction supervision, project management, quality control, coordination & liaison in the project team, field survey

electrical/mechanical maintenance supervisor

Snubbing / Workover Supervisor, Field Technician.

I am seeking employment on construction/shutdown projects as a QA/QC inspector or planner.

Mechanical Cement & Power plant Projects Installation, Commissioning & Maintenance

I am 38 years old, good health and have 12 years solid experience on project management for several types of large, complex and fast track International projects.

Working Offshore as an engineer and mechanic for 15 years

PDS Piping designer Engineer

Sr. Technical Assistant in Soil & Water testing lab atleast `15years experience

PLANNING ENGINEER: Liaison with Client, Consultant, Sub-contractors and Internal departments to get complete information on assignments for further instructions to Project Engineers. Conduct daily planning/production meetings with Site Manager/Project Engineers for discussing critical activities

Process Engineer in Refinery, Oil&Gas and Petrochemical Industries

Construction Mgr.- Piping Eng.

Senior Electrical Control Eng. / PLC Programmer / Scada System Specialist

Senior Construction/ Field Engineer/Superintendent with HND Mechanical Engineering and a member of the institute of incorporated engineers. I have 15 years of experience in Construction management in various roles and locations around the world, working for major EPC contractors.

I have a diploma in mining engineering with 1st class manager's certificate, and15 years of experience in opencast mining operations. Skills like active role in mine production planning, cost control, inventory management ,equipment productivity, team-building & training, statutory requirement.

Relay Protection coordination (by Captor software); motor starting, load flow, fault studies by ETAP software; DBs and MCCs selection; AFD selection and implementation; Frame6 power generation commisioning and maintenance; Switchgears up 110 kV commisioning and maintenance.

v A First class (60%) Bachelor of Chemical (B.E.) engineering graduate from Poona university in 1992, having a total (Cryogenic Air Separation/LNG Terminal & Regasification Unit /Refinery/Petrochemicals) industrial work experience of ~ 12 years.

5 Yrs plus experience in overseas construction project in Singapore

aws cawi

Mining engineer

PDS administration, Complete project setup and support on multiple large scale projects using PDS 7.2, 7.1,7.0 and 6.4 Microstation J/SE, PDS Piping specifications and RDB Support, Isogen setup and support, INTools support, SmartPlant Review Administration, and other 2D and 3D CAD tools.

M.Tech in Mining Engineering,having about 4 year mining experience in production and planning, Knowledge of 12D Model Software.· Received environmental training in Environmental Requirements,Integration of Reclamation & Mine Planning , Received Safety Training in Mine Safety Programs, Philosophy ,

Engineering / Construction Mgmt – Over 25 years combined experience supporting large domestic & international project assignments in both Home Office & Field locations. Business lines include Mining & Metals, Nuclear Power, Nuclear Waste Handling, & Refinery / Chemical (Oil / Gas, & Hydrogen) Plants

Industrial Journeyman Electrician-28 years

I have 18 years experience in the Oil Service Industry, involved in all aspects of Coiled Tubing, Nitrogen Services, Fluid Pumping, N2/He Leaktesting(HLD), Pipeline Pigging/Testing & Well Testing. My last permanent position was Service Supervisor II for Halliburton Coiled Tubing in Australia. Since

Experienced Senior Civil/Structural Designer with mostly Petro-Chem background

B.E in E.C.E with 2.5 yrs of exp as Desktop admin and 2.5 Yrs of system admin

Present Bachelor of Petroleum and Natural Gas Engineering (Designing counstruction and exploitation of oil and gas pipelines,piping and storage facilities faculty )

Rotating Equipment Engineer

Experienced (11 years) General Manager, Plant Manager, Maintenance Manager, H&S Manager

Chemical engineering degree in oil&gas field, experiance at project engineer and vice-project manager, control project, cost stimate, coordinate engineering desceplin, etc.

Senior technician instrument

I would like to announce my availability to any professional company in need of a Senior HSE Officer with an Engineering and Medical Degree. My vast experience and capabilities and the ability to get along with people will prove to be an asset to the company, client and workers. As a professional,

Linux, Ansoft designer, Auto CAD, C++ and Microsoft Office

MECHANICAL ENGINEER & QUALIFIED ASNT LEVEL II IN UT.RT,PT & MPT....

litigation lawyer

Welding inspector

Lease Acquisition

Dear Sir, I believe that I have the capabilities and the experience that enable me to match the requirements of this job. I have had a considerable experience in many companies and many domains.

disiel mec h with experience trucks;earthmoving and hydroluics

Seeking challenging assignments as PDS Structural Designer and Senior Draughtsman with a reputed organisation in the Construction Industry.Based on my skills in Civil/Structural Designer Using Application PDS, SPR, AutoCAD, Microstation, I am confident that I would be a great addition to your team.

Apply for post of Electronics and Instrumentation engineering

I have well experiance in building construction work with sound technical skills.

i am graduate from electrical engineering and i,m good at computer . i have ability to work any time and any place

i have one year experience iin leading post tensioning company . I have completed B.E civil Anna university Chennai. I have skill set in AUTOCAD, STAAD.Pro,ADT ,MS Project

18 Years of experience in Electronics & Instrumentation field at supervisory level in Construction & Maintenance, including 3 ½ Years of Gulf Experience. Known for superior integrity, accommodative nature, sincere & honest team member.

In June 2003, I completed Diploma in Mechanical Engineering from M.S.University, and recently I passed NDT LEVEL II Examination from FLAWTECH INSPECTION SERVICES. And I have 3 years work experience in mechanical field.

strong drilling, geological, petrophysical, coring/core analysis, OH/CH log interpretation & reservoir studies background,worked with Halliburton,Reslab,QP & Schlumberger,Involve in Operations/Well Site/Petroleum Development,reservoir characterization,Image analysis, FMI/OBMI/MSD,Mentor &training

First Prev 151 152 [ 153 ] 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out