Resume - Hands on experience in Vibration Monitoring & Analysis of Plant Rotating equipme...

Misco Jobs

Resume #47060

CONTACT INFORMATION:
View contact information...

To: Recruitment Section

Sir,

Sub: Application for the Post of "Condition Monitoring Technician" - reg

I have got a Diploma in Mechanical Engineering with 10 years Experience in condition monitoring field. Responsibility is commensurate with Condition Monitoring Engineer.

Since 2001 I am working in the Saudi Arabian Fertilizer Company (SAFCO), a leading fertilizer manufacturer in Kingdom of Saudi Arabia.

Previously I was worked in the Mina Abdullah Refinery, Kuwait as the Rotating Equipment & Condition Monitoring Technician for the period from 1995 to 2000

My job responsibility is to Collect, Monitor and interpret data, such as Vibration and lube oil data, to maintain plants availability. Also to collect and interpret data using different diagnostic equipments by using a variety of condition monitoring and diagnostic techniques. Further I have played a key role in the improvement of different mechanical condition of rotary equipments in my areas.

I look forward to have an assignment with your good organization.

RESUME

OBJECTIVE:
To excel in the Condition Monitoring of Fertilizer / Petrochemical / Refinery Industry and become successful in respective functions.

SKILLS:
Hands on experience in Vibration Monitoring & Analysis of Plant Rotating equipment by the use of SKF Microlog 60 with SKF Prism4 1.35 & SKF Machine Analyst 2.2 vibration analysis and data management software.
Familiarity with the data base creation, modification and report preparation using SKF condition monitoring software.
Hands on experience in Rotating equipment maintenance
Familiarized with Laser Alignment Fixture laser tool
Computer Skills (MS Dos, Windows, MS Word, MS Excel, Power Point & Internet)

CERTIFICATION:
Vibration Analyst II issued by the Vibration Institute
Fire Extinguisher Certificate issued by the SABIC Fire Training Center

EDUCATIONAL QUALIFICATION
Diploma in Mechanical Engineering

Total Years of Experience
14 Years

CAREER SUMMARY:
Condition Monitoring Inspector Feb 2001 to till date
Saudi Arabian Fertilizer Company, KSA

About the Company
Working in Saudi Arabian Fertilizer Company (SAFCO) thro' contract. SAFCO is one of the largest fertilizer complexes in KSA producing Ammonia, Urea & NPK. It is having 3 ammonia plants with total capacity of 5000 MT/day, 3 urea plants with total capacity of 5800 MT/day & 2 NPK plants.

Responsible for
Condition Monitoring of Rotating Equipments

Carried out Periodic Vibration Analysis (Spectrum Analysis) using Condition Monitoring instruments & Software for rotary equipment such as Pumps, Compressors, Fans, Turbines and Motors to ensure that Vibration levels are within the accepted limits. For analysis, high-resolution spectra will be collected in the frequency range of interest. If required Phase and time waveform analysis will also be performed.

Vibration Analysis Reports prepared based on the monitoring, highlighting any increase in Vibration & Sound level and recommend action to be taken by Maintenance and Production Department.

Carried out monitoring of online protection system (BENTLY NEVADA3300) and detection of Anti-friction bearing deterioration

Continuous Motor solo tested for the acceptance once returned from the overhaul. Critical and Semi critical machines vibration data's are recorded during the plant start up.

Reliability of every rotary equipment was periodically checked & highlighted if there is any deterioration is noticed in the equipment

Laser Alignment Technique
Have hands of experience in operating the Fixture laser - Laser Alignment Kit.
Condition monitoring services jobs are being done for pre commissioning and commissioning of Petro - chemical and fertilizer plant equipments.

Rotary & Condition Monitoring Technician March 1995 – March 2000
Mina Abdullah Refinery – KNPC, Kuwait

About the Company
Worked in SPIC (Mar '95 to Nov '95). SPIC is one of the largest fertilizer complexes in India producing Ammonia, Urea & NPK. With total capacity of Ammonia 1800 MT/day, urea plant with total capacity 2000 MT/day & 2 NPK

Worked in Mina Abdullah Refinery – KNPC (Nov '95 to Mar 2000). MAB is one of the largest Refineries in the Kuwait with production capacity around 150000 barrels/day.

Responsible for
Preventive maintenance, Repair / overhauling of rotating equipment viz Multi-stage Pumps, Compressors, Steam Turbines, Fans

Creating procedures for Overhauling of Rotating Equipments & for Preventive Maintenance

Carrying out the Condition Monitoring routine data collection, interpretation of collected data and preparing reports of the rotating equipment in Fertilizer and Refinery Equipment

Annual Turnaround maintenance

Route cause analysis for the rotating equipments

Maintenance and Overhauling of Rotating equipments:

Centrifugal Pumps (United & Ingersoll-Rand)
Steam Turbines (Single Stage – Coppus, SNM)
Centrifugal Compressors (IHI Sulzer, Dresser Rand)
Reciprocating Compressors (Mitsui-Thomassen, Kobe Steel)
Gas Engine (GMWC – 12 Kobe Steel)
Hydraulic Turbine (Nuovopignone)
Gear Boxes (Helical, Bevel, Worm & Worm wheel)
Setting of various types of Mechanical seal
Performing Alignment by various methods

Mechanical Technician 1991 to 1995

Joined as a Mechanical Technician in Photon Industries, which is medium scale industry fabricating and commissioning of Mechanical equipments to the process industries like oil & sugar.

Responsible for
Repair / overhauling of rotating equipment like Pumps, Gear Boxes, Agitators, Air compressor & Fans

References: available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8151 to 8200 of 15512)

Go to Search Parameters...

Brief Description

Chemical plant operator, 17 years experience, 4 years as plant controller.

I have extensively worked with world renowned engineering firm

Effective comminication, Overall understanding of Technicalities pertaining to my day-to-day activities. Reporting to the Project Manager of SNGP (Saih Nihayda Gas Plant) and Associated Facilities. US$ 150 Million Project, for Petroleum Development Oman, being executed as a Joint Venture Project wit

I am presently working as Advanced Process Control Engineer in one of the leading APC company I am having hands on experience of DMC+,AspenIQ,InfoPlus21, Spyro,Aspen Blend and having a fair exposure of HYSYS simulation software. I am a chemical Engineer from India and worked in Oil refinery.

Key Skills:Mine planning, Mines safety, Mines operation & management etc . Qualification : B.E. - Mining

Good relationship with the work friends, easiness of creating friendships, taste of reading, to fish and to do pictures for besides practicing soccer.

I have worked as a Driller and Tour push for the last 27 years.

Coded pipe & pressure vessel welder with valid certification

Construction superintendent/construction manager

Diesel fitter, supervisor, work shop planner

Automation, control engineering in industrial plants

Experience in pollution assessment, emission inventories / monitoring, characterisation of sources, exposure assessment, source testing, data collection & interpretation, emission estimates, regulatory analysis, engineering calculation, presentation and technical report writing.

Area Maintenance Static Supervisor

SCM Logistics and Materials Managment

Marine Electrical with electronics & Automation Exp. (off - shore, Oil Rig, FPSO, Drill Ship, OSV) 21 years exp.

ME (Environmetal Engineering), 4+ years in desing of waste water treatment units, design of under ground drainage network systems to cities.

Dynamic Assistant Professor of Environmental Engineering broadly experienced in contaminant transport modelling and pollution control in surface and groundwater. Physico-chemical, biological and electrochemical design of environmental control processes, hazardous waste management and treatment.

Dual Post Graduate with Mechanical + Management with 8 years of Industry Experience is looking for fresh chanllenges.

Over twenty-six years experience in the Oil Industry. The last sixteen years involved in pre-commissioning, commissioning, startup, and continuous operation

Asphalt Plant Manager/Foreman 38 years in asphalt production field

Journeyman Pipefitter, Journeyman Gasfitter (Class GB-00018470), Journeyman Plumber - Red Seal (IP #M-16-00616) Since starting my apprenticeship in 1988, I have gained experience in many aspects of the mechanical trade, such as construction, shut-downs, and maintenance...

11 years experience in various projects includes design, costing, construction and control. Project support experienced working in fast-paced environmental demand strong organization, technical and interpersonal skills

AutoCAD, ADT,3 DS Viz, MSOffice, C, C++, Unix,ProE

Iam a postgraduate in Environment Management worked with various petrochemicals, chemical, pharmaceutical, bulk drugs and Oil & Gas E&P industry for the past 8 years in various countries. My experience has been as an Environment Engineer; Environmental Specialist; QHSE Engineer and EMS staff in

Am a fresh directional driller with background in well planning and borehole survey, i have ten years experience in various drilling position.

Automation engineering experience in oil and gas sector. Programming experience Hardware and software knowledge

Chemical Engineer with 11 years Experience in Process Engineering, Production in chemical industry

Job Objective To pursue a career with a major international industry. The position should offer career opportunities, expansion of knowledge and an immediate challenge

My qualifications are reinforced by over 20 years of Industrial Insulation as a front line supervisor. Multi-tasking for the past 5 years as a Painting Supervisor as well as Insulation Supervisor, has expanded my talents to a broader range that may well serve you better.

Engineering, cadd designer, autocad, microstation

Industrial Engineer, with more than 9 years Experience in Planning and Cost, in EPC and developmental projects, both onshore and offshore. Worked in Oil,Gas,Petroleum and Automotive field.

13 years Completion/Workover experience. Completion, sand control, fracturing, matrix acidizing design. Extensive project management experience including three assignments in operator's offices. Operations and engineering management experience.

project in erection, maintenance and up gradation project of 40 MW power station and

Assistant Product Engineer " Wafer Probing ang responsible for Yield improvement "

Hands on experience in Vibration Monitoring & Analysis of Plant Rotating equipment by the use of SKF Microlog 60 with SKF Prism4 1.35 & SKF Machine Analyst 2.2 vibration analysis and data management software. Familiarity with the data base creation, modification and report preparation using SKF MA

i m the student of BS GEOLOGY 7TH semester nd looking for job.

More than 8 years HSE experience.

1yr Apprenticeship in BHEL,Trichy

Desktop technician

Over 16 years of experience in leadership roles within complex operations, supervising diverse teams and managing challenging programs/assignments within U.S and international locations

A focused team oriented Petroleum Technologist who brings with a varied work experience in production line and Electrical and Electronics troubleshooting able to work in ambiguous and demanding situations with positive results.

Highway Laboratory / QC Manager with 25 years experience in materials

marine engineering steam ship,maintenance fitter,malaysia maritime academy

Good communication skills; Microsoft and Programming skills; B.Eng in Mechanical Engineering.

Electrical and electronics engineering

Metallurgist with heat treatment and quality control exp. as a technican.

Working knowledge of PLC's

A Safety Professional with a enthusiastic approach to Safety & Environmental issues, excellent communication skills, able to plan & prioritise busy management schedules while ensuring high visibility and involvement

I am a skilled solid tradesman with a solid family looking for interesting ,rewarding employment.

I am a B.Tech. (Applied Petroleum Engineering) from University of Petroleum and Energy Studies, Dehradun (India). Though I am not experienced but i have certain skills like I work well as part of a team andI find it easy to get on with people.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 [ 164 ] 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out