Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #4739
next resume »»
CONTACT INFORMATION:
View contact information...
Technical Experience Summary
INDIAN NAVY FROM AUG 1985 TILL AUG 2000
11yrs of experience on board various Naval Ships and ship repair organizations. Out of which 08 years in Supervisory and management cadre, involving in installation, operation, fault finding, defect rectification and calibration of Electrical equipment
* MAINTENANCE & REPAIRS OF GENERATORS AND POWER GENERATION & DISTRIBUTION SYSTEM INCLUDING ITS INSTRUMENTATION.
* REPAIR AND MAINTENANCE OF WITH AUTOMATIC REGULATORS FOR 2.5 MEGA WATTS.
* REPAIR AND MAINTENANCE OF SHIPS ELECTRICAL EQUIPMENTS, PARALLELLING AND TRANSFER OF LOAD BETWEEN SHIPS GENERATORS.
* REPAIR AND OVERHAULING OF VARIOUS MOTORS AND ITS CONTROLLERS AND SWITCH GEARS. THYRISTORS CONTROL MOTORS.
* MAINTENANCE OF CONVERSION MACHINERIES AND ASSOCIATED SWITCHBOARD. EXPERIENCED ON GYRO NAVAIDS, SHIPS STABLIZER, STEERING SYSTEM AND MAIN ENGINE AND MONITORING DEVICES AND ALL WEAPON CONTROL SYSTEMS. EXPERIENCED ON FIRE ALARM,FLOOD WARNING AND FIRST AID.
* MAINTENANCE/DEFECT RECTIFICATION OF AUTOMATIC CLOSE LOOP REMOTE CONTROL SYSTEMS & SERVO SYSTEM USING SERVO ELEMENTS.
* ANTI ROLL SHIP'S STABILIZATIONS, GYRO AND NAVIGATIONAL MOTORS USING. ELECTRO HYDRAULIC AND ELECTRO PNEUMATIC SYSTEMS.
* CALIBRATION OF PRESSURE CONTROLLER AND HP/LP REDUCER VALVES FOR HYD/ AND PNEUMATIC CIRCUITS.
Responsible for rendering reports/returns, maintenance of log books and preparing the equipment for various acceptance trails. Responsible for installation and execution of planned preventive maintenance on all electrical equipment.
RELIANCE PETROLEUM LTD. FROM DEC 2000 - AUG 2001
WORKING AS COMMOSSIONING ENGINEER (on contract) LOOKING AFTER ERRECTION COMMISSIONING OF ELECTRICAL AND INSTRUMENTATION JOBS FOR THEIR EXPANSION PROJECT. WORKED ON HT/LT SWITCH GEARS, SWITCH BOARDS UP TO 33KV, TRANSFORMERS.
* VARIOUS KIND OF CIRCUIT BREAKERS LIKE VCB, ACB, SF6 ETC.
* COMMISIONING OF HT/LT MOTORS, BATTERY CHARGER, UPS SYSTEM, MCC, PCC, CABLES, RELAYS, BUSBARS.
* MOTOR VISION PROTECTION RELAYS, NUMERICAL BASED RELAYS, LIGHTING SYSTEM.
* COMMISSIONING OF DCS (FOXBORO) SYSTEM AND ITS COMPATIBLE INSTRUMENTS.
* ROSEMOUNT –FISCHER MAKE VARIOUS TRANSMITTER AUTOMATIC TANK GUAGING RADAR(SAAB) SYSTEM.
* ELECTRICALLY & PNUEMATICALLY OPERATED VALVES (ROTORK & BIFFI) WITH SERIAL COMMUNICATION..
* OPEN/CLOSE LOOPS COMPRISING VALVES, TRANSMITTERS, I/P SWITCHES, SHUT DOWN VALVES ETC.
* FIRE & GAS SYSTEM BY WORMOLD.
JALKHERI THERMAL POWER PLANT, PATIALA (SEP 2001-jun 2002)
AN ELECTRICAL ENGINEER. FOR THIS PROJECT JOB INVOLVED WAS REFURBISHING AND RECOMMISSIONING OF POWER PLANT.
JOB AREA INCLUDES:
*ELECTRICAL AND INSTRUMENTATION JOB FOR BOILER AND TURBINE FROM BHEL.
*CONVEYOR SYSTEM, ID FAN AND FD FAN CKT COMMISSIONING.
*RAPPING MOTORS,VARIOUS AUX. MACHINERIES ASSOCIATED WITH BOILER AND TURBINE.
*HT/LT MOTORS,PUMPS, EOT CRANES, PLC FOR CONVEYOR SYSTEM.
*PRESSURE SWITCHES, TEMP.SWITCHES,CONTROL VALVES, COMPRESSOR, AIR-CONDITIONING PLANT FIRE FIGHTING SYSTEM AND THEIR PANELS.
*COMMISSIONING OF TRANSFORMERS,ESPSYSTEM,VARIABLE SPEED DRIVES,ETC.
RELIANCE INFOCOMM LTD. (JULY 2002 TILL TO DATE)
*AS AN FIELD ENGENEERING OFFICER JOB INVOLVES OPERATION AND MAINTENANCE OF ELECTRICAL AND TELECOM EQUIPMENTS.
*UTILITY, AND FIBEROPTIC NETWORK.
* AS A WHOLE, I WAS ACTIVLY INVOLVED IN INSTALATION AND COMMISSIONING OF UTILITY EQUIPMENTS, SCADA SYSTEM FOR MONITORING.
*THE MAIN JOB WAS TO KEEP THE SYSTEM ALIVE AT ALL COST WITH MINIMUM BREAKDOWN TIME.
*UTILITY INVOLVES GENERATORS, PERCISION AIR-CONDITIONERS, COMPRESSORS, DC POWER SYSTEMS, BATTERY BANKS, AND SCADA NETWORK, CARRYING OUT SPLICING, TALK SET, POWER METER TEST ETC.
*HAD HANDS ON TRAINING ON BTS ELECTRONICS (LUCENT) AND TRANSPORT EQUIPMENT (NORTEL), FIBER MONITORING SYSTEM (AGILENT
Education
*Equivalent degree in Egg. Vide gazette of India dated Nov. 72 Part-11 section A page 588 refers.
*FOUR YRS DIPLOMA IN ELECT. ENGG FROM NAVAL INSTITUTE OF ELECTRICAL ENGINEERING, INS VALSURA- JAMNAGAR. AN ISO 9001 INSTITUTE.
* Eighteen weeks advance course in control Egg. From Naval Institute of Electrical Engineering- INS VALSURA. AN ISO 9001 INSTITUTE.
*COURSE IN LEADERSHIP AND MANAGEMENT FROM NAVAL INSTITUTE OF MANAGEMENT- AGRANI, COIMBATORE. WHICH TEACHES CONCEPT OF RUNNING THE ORGANISATION, MANAGING MEN AND MATERIAL
*CAPSULE COURSE IN SAFETY AGAINST NUCLEAR CHEMICAL BIOLOGICAL WARFARE INCLUDING FIREFIGHTING AND DAMAGE CONTROL FROM INS SHIVAJI, LONAVALA.
Computer Knowledge
MS OFFICE, WIN 95/98, POWER POINT. RELATED TO OFFICE USE AND REPORTS.
Administrative Experience:
EIGHT YEARS OF EXPERIENCE IN SENIOR SUPERVISORY/MANAGERIAL LEVEL, WAS RESPONSIBLE FOR DEPLOYMENT AND UTILIZATION OF MEN-MATERIAL FOR SMOOTH FUNCTIONING OF DEPARTMENT. COORDINATION WITH OTHER DEPARTMENTS AND ASHORE NAVAL/CIVIL AGENCIES FOR PROCUREMENT AND UTILIZATION OF SPARES AND CONTROL OF INVENTORY PREPARATION OF MAINTENANCE SCHEDULE OF THE EQUIPMENTS TO UPKEEP THE PERFORMANCE AT OPTIMUM OPERATIONAL EFFICIENCY. PLANNING OF REFITS OF SHIPS AND PREPARATION OF DEFECT LIST, ORGANIZING AND EXECUTING PRE/POST REFIT TRIALS OF ELECTRICAL/ELECTRONIC EQUIPMENTS.
RESPONSIBLE FOR WELFARE AND MORALE OF PERSONNEL IN DEPARTMENT CONDUCTING MEETIN GS AND COUNSEL ING SUBORDINATES. CONDUCTING MEETING AND SEMINARS OF TECHNICAL AND PERSONAL NATURE.
It is certified that the above particulars are true to the best of my knowledge and belied and will be supported with relevant documents as and when required.
PERSONAL DETAILS
DateOfBirth: 01 MARCH 1968
Sex: Male
Languages Known: English, Hindi,Gujarati.
Marital Status: Married
Languages Known: English, Hindi, and Gujarati(Read, Write & Speak)
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 7501 to 7550 of 15509)
Go to Search Parameters...
Brief Description
Bachelor of Engineering Grade : Grade A/1st Class Field of Study : Production Engineering Aggregate: 66.30% Institute / University : Anna university, Government College Of Technology, Located In : Coimbatore, Tamil nadu, India. Graduation : April 2005
Experienced underground mining geologist
Mircosoft excel, word, powerpoint & cot (chain of title) program
Mining Engineer especializing in nickel Mining operation in a open cast mining method of extraction
After working on Service Rigs here in Alberta for over six years, I would like to further my experience by working overseas. With my background of rig work, farming, and college, I can push a rig or drill on it.
I am a graduate mining engineer from the most reputed mining engg college in India(Indian school of mines) and holding a First class colliery Manager Certificate from Director General of mines safety, India.
I have eleven years of experience in Construction, Oil & Gas industries and in other fields too. Good knowledge in Logistical support, Materials Management, Supply Base Operations, Onshore Coordination and in other logistics aspects too.
Strategy development & implementation; Project management; Team leadership; Standardisation & cost reductions; ITIL; Quality Management - ISO 9001; Customer Relationship Management; Programming methodologies; Engineering applications; Excellent communication/negotiation
Instrumentation, Control system, quality and compliance Engineer, fluent in English, French and Arabic
DIPLOMA (3YRS.) AC&R , BDM, DMM, B COM, SALES AND MARKETING
Sr. Instrument Technician
I am a diploma holder in electrical engineering, having 10y experience in electrical & instrumentation designing and drafting for oil & gas, petrochemical projects. Also worked for leading companies (Adco, Adma-Opco, Enoc, Technip-Auh, Zadco etc)
Engineering executive with over 11 years of intl exp, in the positions of increasing responsibility in renowned EPCC companies in Oil & Gas and Power industries. Reputation for consistently beating the time deadlines. Fully capable of effective management of large engineering projects.
Extensive experience in managing E, H & S programs in South America, Mexico & the United States that resulted in contributing to eliminating serious worker injuries that resulted in effectly established a safe environment. Worked effectively with OSHA CFR 1910 & 1926, EH & S Compliance, NFPA Codes.
OBJECTIVE Seek a full time position as a reservoir engineer in the area of well performance, water flooding performance, reservoir recovery mechanism, and reservoir characterization. Especially interested in multi-discipline teamwork.
A well experienced environment sector professional, with a proven track record in developing an effective team. Capable of proactively delivering pre-agreed objectives, competently and to budget. Motivated by achieving results through team performance, definitive leadership, concise decision making.
looking for QC/NDT Engineer
Front end/detail design for refineries, upstream oil & gas, petrochemical plants. Control and automation systems for oil and gas projects. Experience in managing large size engineering work. Project management, planning, cost control functions associated with LSTK projects.
Presently working as an Inspection Engineer for their contracts in P.I.C. running plants of UREA 3150MTD AND NH3 (AMMONIA) 1880MTD PLANTS at Shuaiba, Kuwait.
PhD in Process Integration, Experience in chemical process synthesis, design, and optimisaiton, research in separation processes, synthesis of batch distillation processes, reactive distillation, pressure swing adsorption
10 Years of Working Experience as Planning/Scheduling Engineer, Cost Control Engineer and Quantity Surveyor to Several Projects in Saudi Arabia, Algeria, Singapore & Japan. Expert Level in Primavera & Microsoft Office, MS Project & ACCESS.
1) CAN MANAGE MEDICAL AND SURGICAL EMERGENCIES,ESP. ACCIDENTS& TRAUMA 2) CAN MANAGE FRACTURES AND DISLOCATIONS 3) CAN PERFORM MINOR/MEDIUM SURGERIES
Field of expertise includes the following: AutoCAD releases 10 to 14, 2000 and 2002. Familiar with AutoCAD, Microstation & Microsoft (office) software
i'm chemical engineer working presently with TOYO ENGG. INDIA LTD. attached pls. find my resume.
I am enrolled in a Water Quality Technology Program. I am nearing the end of my second semester of studies and looking for a temporary position (4-8 Mos.)in a treatment facility to enrich my academic learning. I am available from the beginning of May 2004 - end of August 2004.
Education: HNC in ships engineering. Work experience: 12 years as ships engineer on tankers, 1,5 years ass. maintenance manager of a liquid bulk terminal in Thailand with products such as styrene monomer and ethylene and 7 years as maintenance manager in this liquid bulk terminal.
• Quantitative earth scientist • Strong analytical skills • Advanced technical and computer skills • Excellent multi-lingual communication skills • Significant international experience
Experienced Logistics/Procurement Manager
Strong verbal and written communications skills, highly organized, proven ability to plan, detail oriented, self-motivated, dependable, ability to interact well with customers, employees, at all levels of management. Willing and available to travel (Domestic and International)
A Melbourne based Geophysicist with PhD and 6 years experience in potential field geophysics. Fields of Interest: Gravity, Magnetics, Radiometrics, Electromagnetics, IP, GIS, and Computing. Highly skilled in data and image processing techniques.
Looking for suitable position in Nottinghamshire
18 yrs of EXPERIENCE in O&M FIELD AND CONSTRUTION.WORKED IN WORLDS LARGEST REFINERY PROJECT AT JAMNAGAR,ANDIN POWER PLANT,AND PRESENTLY IN INFOCOMM PROJECT.THROUGH KNOWLEDGE ABOUT POWER GENERATION AND DISTRIBUTION SYSTEMS, AUTOMATION, CONTROL ENGINEERING, MOTORS, PUMPS.
Over 18 years experience in oil and gas industry working in offshore/ onshore fields and base offices at various levels in well services mainly in completions including subsea completions and also in wireline, well testing, well stimulations & workover operations.
This is my resume which is appropriately suited for all engineering and operations jobs.
I have 12 years experience in the Oil & Gas industry on the IT & Telecommunications area. My last work experience was with CMS Energy Oil & Gas as the IT & Telecommunications Manager for West Africa family based in Equatorial Guinea.
Superintendent Supervisor Manager
Education : Diploma in Mechanical Engineering.I am having 19 years experience (11 years in Gulf + 8 years in India) in the field of piping works in Oil & Gas, Refinery, crude oil gathering station, Gas recovery flash gas compressor, Heavy industry, Gas utilization.
Career petroleum E&P, Refining, Laboratory, Technical, Management, Administrative, Patents, Contracts, Sour Gas, Start-ups, Debottlenecking
5yr experience in Piping Design (PDS), Layout Planning, Project Planning & Management, Erection supervision & support.
I have experience in drilling, formation evaluation and geosteering
6 Years Experienced Exploration And Field Geologist. Drilling Programs, Core Logging And Ore Sampling Open Pit And Underground Mining Experience. Sedimentary Basins And Environments In Special Clays And Sulphate Deposits, Mississippi Valley Type Deposits. Contracts With Drillers, 2d-3d Modelling
As a mining engineer, planning and design have my main resposibilities. Giving well informed information and mining options that adhere to both company objectives and operational realities is at the heart of what I do.
Broad range of experience in water, wastewater and haz waste treatment. Mangament experience and varied overseas work experience.
Piping Design Engineer With One Year Experience In Preparation of Plot plan & Key plan,General Arrangement Drawings,Nozzle Orientation for Process Equipment,Isometric Drawings with Bill of Material,Equipment & Piping Layouts.
Have passion and experience working in oil and gas industry mainly in mantainence services.
I'm graduated from Uitm Shah Alam and now looking for a job in quantity surveyor. i have 1 year experience and very active club at Uitm. i also can go for outstation workand very like to meet all people.
I am a person of cheerful disposition,taking instructed tasks reasonable easy all the times but affable with a will to succeed in
Civil Engineer (N.E.D University)
4 years hand on working in Pipe Manufacturing Plant Offshore and Water Injection Pump related to a medium and large engineering and construction project with client and engineering contractors. Extensive experience in Civil Work, Quality Control Inspection and operating computerized Document Control
Intersted in refinery, explorationtion & process operations
First
Prev
[ 151 ]
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
Next
Last
Seach Parameters
Goto Advanced Search...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com