Resume - Wellsite geologist , Operation geologist ,The work is entirely based on a rig w...

Misco Jobs

Resume #48099

CONTACT INFORMATION:
View contact information...

EDUCATION:
1979: Baccalaureate From High Technical School of Algiers As major in Electronics

1979 – 1984: Petroleum State engineer in Geology at the Algerian petroleum Institute I.A.P Leading to " Diploma State engineer "
2005 – currently: Attending MBA courses with ROBERT
GORDON University ABERDEEN

WORK EXPERIENCE:
1984 – presently: Senior Operation & Production Geologist with SONATRACH
MAIN TASKS AND RESPONSABILITIES
The work is entirely based on a rig where the following work activities during exploration and appraisal drilling projects are typically undertaken:
* analysing, evaluating and describing formations while drilling using cuttings, gas, FEMWD (formation evaluation measurement while drilling) and wireline data;
* comparing data gathered during drilling with predictions made at exploration stage;
* advising operations personnel on site and in operations office;
* identifying lithostratigraphic formation boundaries, casing setting depths and coring points
* calling for coring on shows and gas;
* advising on drilling hazards and drilling bit optimisation;
* taking full responsibility for making decisions about suspending or continuing drilling;
* supervising mudlogging, FEMWD and wireline services personnel;
* monitoring quality control in relation to mudlogging, FEMWD and wireline services;
* keeping detailed records and writing reports;
* undertaking evaluation of offset data before beginning drilling;
* maintaining up-to-date knowledge of MWD (measuring while drilling) tools such as gamma and resistivity, as geosteering becomes increasingly important;
* liaising with drilling engineers, petroleum engineers and mudloggers;
* training staff as required;
* acting, in effect, as the representative of the onshore oil company geology team;
* communicating with onshore operations offices;
* ensuring transmission of logs and reports;
* supervising one or more wells in the same area.
* analysing, evaluating and describing formations while drilling using cuttings, gas, FEMWD (formation evaluation measurement while drilling) and wireline data;
* comparing data gathered during drilling with predictions made at exploration stage;
* advising operations personnel on site and in operations office;
* identifying lithostratigraphic formation boundaries, casing setting depths and coring points
* calling for coring on shows and gas;
* advising on drilling hazards and drilling bit optimisation;
* taking full responsibility for making decisions about suspending or continuing drilling;
* supervising mudlogging, FEMWD and wireline services personnel;
* monitoring quality control in relation to mudlogging, FEMWD and wireline services;
* keeping detailed records and writing reports;
* undertaking evaluation of offset data before beginning drilling;
* maintaining up-to-date knowledge of MWD (measuring while drilling) tools such as gamma and resistivity, as geosteering becomes increasingly important;
* liaising with drilling engineers, petroleum engineers and mudloggers;
* training staff as required;
* acting, in effect, as the representative of the onshore oil company geology team;
* communicating with onshore operations offices;
* ensuring transmission of logs and reports;
* supervising one or more wells in the same area.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1051 to 1100 of 15341)

Go to Search Parameters...

Brief Description

EPCM Project Contracts Interface (Client-EPCM-Subcontractors)

Emergency Management professional with 28+ years of combined experience; managing teams, providing technical expertise and leadership in programs, projects, operations, and training; in both Fire Services, Training Academy’s and the Petrochemical Industry

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

To obtain a challenging position with an engineering firm where I can use my relevant skills and experienced as Interface Design Coordinator / AutoCAD Supervisor and be a contributing member in the growth of the company. Willing to work as a key player in challenges where I can put my committed atti

My professional education has been in the field of Ag. Economics, commodities trading and along with strategic planning and leadership. Abilities that applied in my past in more than 16 years of executive management in agribusiness management and high governmental level positions,

I am capable of achieving organisation¡¦s objectives and organic growth through effective contributions. I have over 13 years of experience in the areas of Health, Safety & Environment Management

Safety Manager/Director - risk management

Maintenance Supervisor/Security, Maintenance Supervisor/ I&C, Project Manager

Civil Engineer. Formwork Specialist. Experience: 14 years. Mounting, Scaffolding, Precast Concrete.

20 years fire fighting experience.Now working in ADNOC Off Shore facility

hv construction,power plant construction,locomotive maintenance,supervisor,general electrical maintenence

Overseas experience in Mineing and Oiland Gas in Maintenance Management

Having 23 years of sound experience in piping and equipment design for Onshore / Offshore Oil and Gas, Petrochemical and Chemical Industries.

24 Years of experience in Piping/ Pipeline Design Engineering for Oil & Gas of Onshore and Offshore facilities.

Experienced land professional with a strong background in all phases of petroleum land management. Proven expertise in a variety of situations, as well as proven leadership skills as demonstrated in Land Manager positions with two companies and as an independent lease broker utilizing the services

Structure designer is make development basic design from engineer to make engineering drawing with make details, sections, connection types and discuss with other department like piping, civil, mechanical etc to make problem solve in engineering design or site.

Fujitsu LV-III Installer, OSP Field Engineer, Structure Cable Lead Installer, Fiber and Copper Splicer, Network Tech, Antenna Tech

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

25 years Petrochemical / Oil Process Operations Including 10+ years in Supervisory / Man Management positions Commissioning and Start-up Assignments (Overseas)

Self-motivated, results-oriented professional with extensive international experience with multinational firms and government-owned facilities in the construction, shutdown, and refurbishing of oil, gas, petrochemical, and power facilities and plants.

Team Leader Const/Maint. Oil/Gas Ind.Experienced in planning/execution of projects ,procedures , method statements , permit systems , progress rep. , reviewing change orders, QA/QC and HSE standards. Running multicultural workforces coordinating disciplines and subcontactors.

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE

Over 20 years of extensive experience as an international consultant. Provider of structural software for the analysis and design of concrete & steel according to ACI, AISC & API codes of practice. Expert in; structural systems & forensic investigation. Professional in; STAAD III & MS office Suite.

Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems

Petroleum Geologist, having more than 22 years of experience. Presently working with Oil And Natural Gas Corporation Limited, India at Mumbai. Well versed in both development and exploration of hydrocarbon.

Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken

Base metal and Gold extractive metallurgist, General Mill foreman. Non metallic project manager. Training and multilingual communication abilities.

Graduated in B.Eng civil 1976 and Post grad Hydraulic in 1982, total 28 years experience in civil, infra such as steel, timber, road, car park structures and sewer and pipe laying as well as tunnels and pipe jacking works.

Over 14 years E & P and Service Industry technical experience with proven records of project deliverables. strong technical background as a Geoscientist, i.e.; Production and Development Geology, 3D reservoir modelling, Integrated Field Development study & Field Reviews.

Diploma in Nature Conservation ( 5 years); Certificate in Environmental Biology (1year); atriculation Certificate (with exemption)

More than fifteen years Experience, working with consulting engineering companies in Iran and Canada, with different assignments in variety of projects including EPC, R&D, master planning and feasibility studies

Free! Experienced Heavy Civil & Design Build Construction Project Manager with additional experience with Project Controls/Scheduling/Claims Resolution Management.

I am a professional process engineer with over 15 years experience

Free! Health, Safety & Environment Manager - Crane Inspector - OHSAS 18000 Lead Auditor - Senior Trainer - HSE Master Degree

NHD Mining, Project and Contract Management, Mine Manager, Technical Consultant

Techno-commercial acumen, Procurement & Vendor development

Electrical Engineer, B.E qualification and 22 years of Electrical Power Distribution Design experience

A highly competent Senior Electrical/Instrumentation Engineer who has developed supervisory capabilities; QA / QC inspection skills; installation maintenance expertise; pre-commissioning, testing and commissioning competence; safety awareness; organising and co-ordinating flair; fault-diagnosis

Had 27 years of work experience on Commissioning, Start-up and Operation of numerous Oil/Gas Production facilities, Petro-chemical, Chemical and Power Plants. Currently working as Operation Support/Pre-Start up Safety Coordinator in Oil/Gas/Sulphur Plant plus almost 7 years of Supervisory position

Managing Oil Field Operation and maintain high safety and low budget operation. FPSO Project Engineering.

More than 28 years of experience in oil industry

22+ years solid background of Piping Design in the petroleum contracting industry, covering all aspects of design activities

Versatile mechanical engineer within the oil and gas industry

Mining Engineer. Management of costs and Budgets. Application of methodology PDCA of Deming. Selection of Mining Equipment. Handling of Explosives. Management of Contractors. Application of the Environmental Standards and Normative

Senior Petroleum Engineer, 20 years experience in petroleum engineering. Areas of interest: Well test analysis. Production optimization & forecast. Productions operations Work over & completion design

Experienced Completing and Producing Petroleum Engineer

Refractory sales and Technical support

Panel operation as well as field operation experience

Expert in conducting ISO 9001 and ISO 14001 audits (consultancy and third party audits) and training with international Certification Bodies (TUV Rheinland Philippines, Inc. and SGS Philippines, Inc.). „X Successfully assisted organizations in achieving ISO certification.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 [ 22 ] 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out