Resume - With over 8 years of extensive experience in detailed piping design of oil & gas...

Misco Jobs

Resume #5036

CONTACT INFORMATION:
View contact information...

With over 8 years of extensive experience in detailed piping design of oil & gas, petrochemical, refinery, onshore plants. Has the ability to do piping layout/design which include pipe support design, MTO check, generation/checking of isometric drawings (isogen)for fabrication which are based on P & ID/UHD/PFD, Plot Plan, and other Information Drawings in accordance with piping standards & codes. Familiar with ASME B31.3/B31.1 codes. Proficient in the use of PDS (Plant Design System) Intergraph Software for 3D modeling of piping, equipment, operating stage, ladders, stairs & structures and for extraction of isometric/Piping Plan drawings. Well-versed in the operation of both Microstation & Autocad software used in 2D applications. Familiar with SmartPlant P&ID Software, Design Review/Smart Plant Viewer used in Model Review. With over 4 years of overseas work experience particularly Japan & Singapore.

Work Experience:

Present Company: SUT Sakra Pte Ltd(SembCorp Utilities & Terminals)

Position: Piping Designer

Inclusive Date: Feb 18, 2003 – present

Project Name: SembCorp Utilities Service Corridor 3D(PDS) As-Built

Project Location: Jurong Island, Singapore

Duties/Responsibilities

* Responsible for the Piping site and structure as-built survey of the utilities service corridor

* Perform Piping PDS partition development(piping,structural modeling)

* Generate/extract isometric drawings & general arrangement drawings

* Edit/annotate PDS SmartPlant P&ID and AutoCad 2D structure dwgs.

Previous Company: Fluor Daniel Inc., Philippines

Position: Senior Piping Designer

Inclusive Date: April 01, 2002 – January 31, 2003

Project Name: CITGO Lake Charles Conversion Optimization Project

Project Location: Louisiana, USA
Duties/Responsibilities

* Perform detailed piping layout/design of process & utility lines taking into consideration its operability, maintainability, accessibility, cost-effectiveness & other project specifications.
* Pipe support design & selection.
* Perform Piping PDS partition development(pipe/equipment modeling)
* Prepare sketch of Non-standard/special supports
* Communicate & interface with other disciplines such as Civil &
Structural, Control Systems, Electrical, & Mechanical Group during the Detailed engineering/design development phase of the project.
Squad checking of equipment, Structural and miscellaneous steels.
* Self checking of isometric drawings against Master P & ID considering the integrity of the design base on project requirements, material specification, good design philosophy and practice.

Previous Company: C&E CORPORATION
( Joint Venture of Chiyoda Corp. of Japan & EEI Corp.)

Position: Piping Designer

Inclusive Date: September 1995 – March 31, 2002
Duties/Responsibilities
Detailed piping design of process & utility lines for petrochemical,refinery, oil & gas plants which include piping layout, pipe support design, material check, isometric drawing extraction/annotation, vendor check of equipment, generation/annotation of General Arrangement Drawing. Performed PDS piping modeling around pumps, exchangers, furnaces, vessels, towers, AFC's, heaters & other miscellaneous equipment such as filters, silencers & ejectors. Prepare, review & revise Piping HydroTest Packages, documentation of Mechanically Completed TestPackages & handover to Turnover group. Review model for clash check using SmartPlant./Model Review software.

OVERSEAS ASSIGNMENTS

A. CHIYODA CORPORATION
Yokohama,Japan
November 1996 ~ February 1999
April 2001 ~ October 2001

PROJECT PARTICIPATION

1. KERTH AROMATICS PROJECT (PSR PROJECT)
Kerth Terengganu, Malaysia
- Isometric Revision and Annotation using Microstation ( UNIX )
- General Arrangement drawing extraction and annotation.

2. SAUDI CHEVRON PETROCHEMICALS (SCP PROJECT)
Madinat Al-Jubail Al-Sinaiyah
- -Pipe routing using PDS Intergraph based on plot plan, P&ID/UHD and with accordance to piping standards and codes.
- 3d modeling of structure and equipment using PDS Intergraph.
- Isometric and general arrangement drawing extraction using PDS Preparation.
- layout and 3d modeling of small bore piping using PDS.

3. EASTERN PETROCHEMICAL COMPANY (SSP PROJECT)
- Pipe modeling using PDS (Intergraph)
- Prepare information drawing of loading data for pipe rack and sleeper and nozzle orientation using 2D CAD.
- Drawing modification using Microstation.
- GA drawing extraction and annotation using PDS and Microstation.

4. TEIJIN POLYCARBONATE SINGAPORE (TPS-4 PROJECT, April ~ Oct. 2001)
- Selection of standard pipe supports & its locations using Design Review Software.
- 3D modeling of piping, equipment, structure, instrument/electrical cable.

B. KOCJV (KELLOG OVERSEAS CORP. & CHIYODA CORPJOINT VENTURE)
SINGAPORE OLEFINS PROJECT (Jurong Island, Singapore)
April 2000 ~ August 2000

1. SINGAPORE OLEFINS PROJECT (SOP PROJECT)
- Preparation, review and revision of Piping TEST PACKAGES to be used in
HYDROTEST.
- Documentation of the MECHANICALLY COMPLETED Test Packages & handover to the Turnover Group.

DOMESTIC ASSIGNMENT

a. KERTH AROMATICS PROJECT (PSR MOCK -UP PROJECT)
Kerth Terengganu, Malaysia
- Prepare piping layout and isometric sketches.
- Prepare material take off of special materials and piping components
- 3D cad modeling of equipment and piping using Autoplant.
- Extraction/annotation of GA drawings using Autoplant.

b. SAUDI ARABIA YANBU (SAY PROJECT)
Yanbu, Saudi Arabia
- Piping modeling ( 3D CAD ) using AutoPlant software.
- Revise pipe route, equipment nozzle orientation.
- Layout and 3D modeling of small bore piping using Autoplant.
c. Oman Liquefied Gas (OLG PROJECT)
Qalhat, Sultanate of Oman
- Revision of pipe routing based on isometric drawing using PDS Intergraph
- Extraction of isometric and GA drawings using PDS Intergraph.
d. Ras Laffan Gas (RGX PROJECT, TRAIN 3) _Dec. 2001 ~ March 2002
- 3D modeling/revision of piping
- extraction of isometric drawings
- design/routing of small bore piping

COMPUTER LITERACY:

Proficient in: PDS (Plant Design System) Intergraph
Piping, Isogen, Equipment, Drawing Manager
Interference, & Frameworks Modules
Microstation 95/SE/J
Design Review/Smart Plant Viewer

SmartPlant P&ID

Autocad Rel. 14/2000

Autoplant 97

Knowledge in: Microsoft Excel/Word/Powerpoint

TRAINING / SEMINARS ATTENDED

a. SmartPlant P&ID- March 2003
Cintech III - Intergraph Singapore b. P & ID, EE Raceway 2D Applications, March 2000
C&E Training Room – Pasig City, Philippines c. Piping Flexibility Analysis, Feb. 2000
C&E Training Room – Pasig City, Philippines d. PDS Intergraph and Microstation 95, March 1997
Chiyoda Corporation – Yokohama, Japan e. Piping Design and Engineering, September 1995
EEI Corporation Training Center – Quezon City, Philippines f. Autocad R13 Update Training, July 1996
C&E Corporation – Pasig City, Philippines g. Professionalism at Work, May 1996
C&E Training Room – Pasig City, Philippines h. Piping Checkers Training, Nov. 11~22, 2002
FluorDaniel Inc., Phils.

EDUCATIONAL ATTAINMENT:
Bachelor of Science in Mechanical Engineering Mapua Institute of Technology

Gov't Exam Passed: Mechanical Engineer's Licensure Examination
April 1995

I hereby certify that the above information is true and correct to the best of my knowledge and belief.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9551 to 9600 of 15339)

Go to Search Parameters...

Brief Description

Seeking a challenging career with in a reputed Company

Proficient in Document Management System & Secretarial Functions

This is essakkipandi, I have 6 years experiance in oil & gas industryI am working in Flour daniel India )p) Ltd,Delhi as Instrumentation Designer. I have studied Diplomo in Electrical & Electronics Engineering, Now i am lookink for Instrument designer join in USA.

Mechanical Engineer with 3 years of experience in electrical instalations

More than 6.5 half years in Documentation with Oil and Gas Related Projects and have a very good expossure in Programming

B.E Civil - 2001

Has been working for an EPC company for eight (8) years with experience in handling such projects of different magnitude both Onshore and Offshore, from grass roots to revamps, tender, FEED (Front End Engineering Design) then to engineering & procurement. Knowledgeable in INtools.

Free! I am a production geologist with over 15 years experience across a wide range of commodities including base metals, copper and gold in both open cut and underground environments.

Total 9.5 years DOCUMENTATION experience including QA/QC, CERTIFICATION and PROJECT DOCUMENT CONTROL CENTER in GAS and OIL Projects with Multi National Companies.

Engg.graduate with exp.in projects at various Breweries in India

actual position: Senior well site geologist

Having a long-lasting interest in mineralogy, I am willing to find a job that will allow me to use and expand my knowledge and analytical skills in the field of mineral exploration.

Senior Qa/QC For Oil/Gas Projects

Senior Electrical/Design/Project Engineer for HV and MV substations

Environmental Health & Sustainability (EHS) specialist with project management and consultancy experience in political and corporate environments. Keen ability to build internal/external consensus to implement projects, start to end. Effective communicator with

Proficient in drafting submittals (2D & 3D) and/or shop drawings prior for construction up to As-built Drawing. Multi-disciplined: Architectural, Structural, Mechanical (including Plumbing & Piping, HVAC, and Fire Fighting), Electrical (including Lighting, Grounding, Telephone & Data, Fire Alarm, a

Qualification; B.Sc (chemistry), Skills; plant operation, precommissioning and commissioning

About eight years of solid experience in designing and implementation(execution) of structural works

LP Modeling, Refinery Planning & Scheduling, PIMS, Process Simulation and Optimization

Certified PMP, with Onshore & Offshore Projects Experience with good Communication skills. Qualified Mechanical Engineer with Project Management skills & Leadership qualities.

Diploma in Chemical technology, 14 years oil field operations experience in onshore and offshore in India and State of Qatar

My working career is coverd with Petrochemical plant structural detail design and offshore jacket type platforms basic and detail design.In the field of offshore i am qualified in in-place, earthquake, dynamic, spectral and determinestic fatigue, transportation, lifting and lunch analysis.

Operating reciprocating compressors [5.3mw] and centrifugal compressors [3.5 mw], multistage centrifugal pumps, various types of dosing pumps etc. Handling various liquids such as LPG, naphtha, kerosene, gasoline and gases like refinery fuel gas, hydrogen etc.

Graduate Research Assistant, University of Nevada, Reno (Jan 2004-present)

A challenging and rewarding position as a Instrumentation Technician in the semiconductor or semiconductor equipment industry.

Obtain experience on Environmental Design and Environmental Health focused in Soil, Water and Air Quality Management and/or remediation.

a team player, dynamic, can work under pressure and divers climatic condition and region, ready to learn and knowledgeable

Seeking a position in environmental engineering utilizing knowledge, skills and experience in water and wastewater treatment and design and waste management.

Piping Engineer - Stress analysis specialist engineer high pressure and temperature piping. Worked with Babcock, Mitsui and presently working with UHDE.

I'm a masters student in the department of Environmental Engineering, University of Missouri - Rolla, USA . I will be graduating in august 2004 and looking for an entry level environmental position. My resume give additional information regarding my background

Mechanical Engineer, with over seven years of experience in construction for Petroleum/oil/gas/power industry. I am certified associated welding inspector CAWI. QA/QC experience

My enhanced qualification & vast experience in developing motivational behaviour & team work among the personnel in the field of Industrial Security & Safety will be appropriate for your reputed organization.

Successful Project/Design Engineer experienced in cutting edge engineering technology. Outstanding record of achievement in managing projects from concept stage, to engineering design, to 1st prototype, to final product.

Consultant Managment to give a support for selling the product.

14 years Open cut mining experience with various makes and models of Earthmoving Machinery, 12 months experience over seas as an Expate in Africa. Currently in a supervisory role looking after field service personnel and workshop personnel.

An experienced geophysicist with a Master's degree in Exploration geophysics and a second-class upper degree (with honours) in geology with interests in field geophysical surveys, seismic processing and geophysical data interpretation.

Camp Supervisor Unit Manager English and French Teacher Sales Representative English Teacher (Sociology and Politics Departments)

BRIEF PROFESSIONAL SUMMARY 8 years professional experience in the Supply Chain functions namely Procurement, Logistics, Export-Import, and Materials & Warehouse management with Global Corporate Giants like Texas Instruments, Wipro, Godrej & Hindustan Lever.

With over 8 years of extensive experience in detailed piping design of oil & gas, petrochemical, refinery, onshore plants. Has the ability to do piping layout/design which include pipe support design, MTO check, generation/checking of isometric drawings (isogen)for fabrication.

I'm an apprentice trained Instrument Technician, trained by a major oil company. I have since gained a wide range of experience at technician and supervisor level in both commissioning and maintenance.

seeking a position in the construction ,design and research field preferable in Water Resources projects in order to have more experience and to work globally, to be able to apply my professional interest in the field of Water Resources and Environmental Engineering.

As you can see from my resume I am very familiar with engineering work through my education at the University of Pittsburgh at Johnstown and with my employment in different engineering fields after my graduation.

Seeking to advance my Mechanical Engineering career in the Oil and Gas Industry of the Houston, Texas area. I am a quick learner and detailed oriented.

Field Service Technician-National Oilwell Varco. Global installations, upgrades, maintenance, or troubleshooting of drilling equipment. I also served as a Pneudraulics Systems Specialist for the United States Air Force. I repaired and maintained numerous aircraft in adverse conditions.

Recent graduate with an MSc in Environmental Studies (Environmental Management Systems) and a BA(Hons) in European Business Studies. Extremely keen to have the opportunity of working within the any function in the oil and gas industry.

Experience in Construction of Power House, Highway Roads, High-rise Buildings, Canals, Air Ports, Aero Bridge ,Delhi Metro Rail, Commercial and Residential Multi Story Buildings ,Water Tank, Guest House , Domes. Familiar with ISO 9001,ISO 14001 and Safety systems.

30 year old dynamic electrical power systems engineer available for immediate relocation.

Please accept my resume for consideration.

Throughout the last five years I have gained valuable experience in both the academic and work related worlds and I am looking forward to applying my acquired skills to the position you have available.

Mechanical engineer.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 [ 192 ] 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out