Resume - Executive Mechanical at Megasteel Sdn Bhd under repair and maintenance, As Mecha...

Misco Jobs

Resume #51010

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
------------
To pursue a career that enriched knowledge in technical and management.
------------

WORK EXPERIENCE:
------------
INTRODUCTION
This report will explain the outline of my working experiences since graduation in May 1997 from University Putra Malaysia in Bachelor of Engineering (Mechanical/System). I was started to join multibillion companies Megasteel Sdn Bhd at Banting Selangor which is under Lion Group of Company in July 1997. After 6 and half year later I was left that company and joining a new company Stagno Tech Sdn Bhd based in Kuala Lumpur,

A lot of experiences were gained in both of company, which is mainly involved in tender document, installation, testing and commissioning, plant repair / maintenance and upgrading. I also had attended several in house training and external training which respect to my engineering knowledge and expertise.

The summary year of services for the Megasteel Sdn Bhd and Stagnotech Sdn Bhd

* Megasteel Sdn Bhd
Position: Executive Mechanical
Period of Service: July 1997 ¡V September 2003
* Stagnotech Sdn Bhd
Position: Mechanical Engineer
Period of Service: October 2003 ¡V Present

The duties and degree of responsibility and accountabilities for the above experience will be outline on this report.

Megasteel Sdn Bhd ¡V Executive Mechanical
1.0 Project Executive ( July 1997 ¡V Mac 1999)
First I was joining in Megasteel Sdn Bhd, 1 was assigned under project team to setup for new plant Megsteel Sdn Bhd worth RM 2.5 Bil. Megasteel Sdn Bhd are the first company produces the Steel Plate in Malaysia. Apart from project I was responsible to handle a few projects that were assigned by Section Head. The scopes of work for the project consist of to identify for specification, tendering and doing the comparison and evaluation such as;
* To prepare the proposal and doing the study work to setup centralized workshop for Megasteel Sdn Bhd and provide the technical specification to purchase new Machineries with various capacity to support plant maintenance.
* To prepare the tender document to purchase 3 units of Centrifugal Centac Air Compressor which is the capacity 5020 cfm completed with refrigerator Dryer for the capacity (11000 cfm) and also responsible to understand the P & I diagram for in plant piping and provide the compilation of bill of material for compressed air piping and auxiliaries equipment plant.
* To prepare the tender document to purchase 30 units of low capacity (1 ¡V 30 Ton) and 14 units of high capacity crane ( 40 ¡V 280 Ton)

1.1 Coordinating and supervise the installation works and commissioning.
Responsible to supervise, coordinate during installation work for the above project. During the installation stage my duties are;

* Manage schedule cost by preparing and reviewing the project cost records and continuously monitoring variation order.
* Coordinating technical specification with the civil and structure consultant.
* Site supervision of erection, pressure test, hydrostatic test, NDT and pipe cleaning work for compress air piping and auxiliaries' equipment plant.
* Involve in testing and commissioning for compressed air system, pressure vessel, rotation equipment, machinery etc

2.0 Plant Maintenance (April 99 ¡V September 2003)
After the plant was completed and I was assigned under Utility Department which is consist of a few area
* Centralized Workshop/Utilities

As a leader I was responsible to taking care one supervisor and 10 technicians will report under me. My job scopes are monitoring all the work for fabrication and machine that was requested by other department. I also responsible to make sure the entire work request to be complete within the time required. Continuously part for machining the equipment such as Mould and Shear Blade from Mould and Segment Shop Dept will monitor closely in order to avoid any cause of delayed. To provide and establish the Standard Operation Procedure (SOP) for the technician and also conduct in house training for them in order to increase their competency and efficiency. To carry out the plant modification such for upgrading and fabrication/machining parts requested by end user/plant department. Beside the workshop the others scope of work involved in maintenance such centralized air condition system ¡V chiller, cooling tower, AHU, etc all type of air condition units.. To prepare the workshop activities to the monthly report and submit to the head of department.
.

* Dust Collector System/Water Treatment plant/Air Compressor
I have 2 supervisors and 12 technicians to doing the maintenance for dust collector system/water treatment plant and air compressor system. This system integrated to the whole production line and cause of the failure this system will cause of interruption the plant operation. So apart from that the following equipment need to carry out for maintenance. The main equipments as follows:

Dust Collector System (Fan & Duct)
Booster Fan (800 kW) 2 Nos
Main Fan (1000Kw) 6 Nos
Filter Bag for Bag House 2 Sets
Chain Belt

Air Compressor Room
Centrifugal Compressor (5020 cfm) 4 units
Refrigerant Dryer 1 unit
Cooling Tower 1 unit

Water Treatment Plant System
Centrifugal Pump
Cooling Tower Fan
Gear Boxes

The extents of my job scope as follows
„X Lubrications on the plant o Schedule On PM
„X Condition Monitoring o Bearing, Fan, Motor Vibration analysis o Lubrication o Water and Air Flow analysis o Non-Destructive Testing (NDT)
- Thickness Gauge
- Dry Pen
„X Equipment Major Repair and Overhaul o Pump o Gear Boxes o Impeller for Main Fan and Booster Fan

„X Store Management for Spare Part availability
„X Root Cause Analysis
„X Plant Equipment Improvement

Lubrication
Parts of preventive maintenance task in the plant are to do periodic lubrication change, lubrication improvement and oil analysis. Oil and grease are vital for rotating equipment and a CMMS program like lube oil change is needed for it's to run smoothly and life longer. For some big single critical equipment or oil circulation systems in large volume, periodic changes is unsuitable thus oil analysis is required to determine the oil condition whether the properties ok or not for equipment to withstand.

Condition Monitoring
All the data came from bearing Vibration, Oil temperature for Main Fan and Booster Fan, pressure differential for filter bags for Bag house, water cool duct temperature and etc will monitor and recorded by Siemens S5 PLC program. All the parameter has been set and configure by manufacturer for example the bearing vibration for main fan and booster fan not exceed to 7 mm/sec, oil temperature not exceed 70 C. The alarm will triggered if there any abnormalities or deviation from normal running condition and action to be taken in order to rectify the problem.
For the certain equipment the manual checking will implement by technician and recorded to the log sheet.
Beside that also the static equipment need to monitor such as compressed air piping, pressure vessel for the DOSH Inspection.
The CMMS (Centralized Maintenance Monitoring System) is the database that to assist and monitor planning of the maintenance for the equipment.

Equipment Major Repair and Overhaul
In Order to gets good the maintenance, the planning for major repair need to establish in order to increase the equipment availability and life span. In this case, the equipment that need to major repair/overhaul will identify form the condition monitoring. Before implementing any major repair work the scope of work need to establish and identify whether require external contractor/specialist, spare part availability etc. The implementation the engineering practice required during the major repair or overhaul.

Store Management for Spare Part availability
Spare parts availability is very important for maintenances and cause of the lack of spare will effect to the plant operation. In the Megasteel Sdn Bhd they are using the System AS 400 to monitor the spare inventory in order to control minimum level of stock.

Root Cause Analysis
The repetitive problem on equipment during production will causes of the down time and this issue will rise up during department meeting chaired by Head Department every week. Certain cases required specialist to discuss and find the best solution to avoid the repetitive problem occurred.

Plant Equipment Improvement
To study and prepare the proposal for upgrading of the system such as
„X To study air consumption for the whole plant and proposed to install additional unit due to high demanding for plant equipment. Also to modify the additional new piping line for refrigerant air dryer for maintenance excess.
„X To design a new piping above ground for Fire hydrant System due to existing piping having repetitive problem such leaking, broken etc.
„X To design and install additional LPG piping for Nozzle Burner at point Caster 16 m Platform and +0 m ground floor for Ladle preheat.
„X To design and install new piping for carbon powder for the Furnace at Steel Melt Shop.

Stagnotech Sdn Bhd
Position: Mechanical Engineer
Period of Service: October 2003 ¡V Present

I was join Stagnotech Sdn Bhd ealrly or October 2003 as Mechanical Engineer and responsible to prepare the Participate in daily, weekly, 3 monthly, yearly, and 5 yearly planning processes order 100 % functionality for Ride Car, Flight Simulator system and etc at Petrosains KLCC. To monitor condition for drive belt pulley, structure track, hydraulic pump in good condition by regular checking as stated in Central Monitoring Maintenance System (CMMS).To prepare the root cause analysis for any cases of breaks down of the system and finds out the solution to avoid the same case happen. I also appointed as Internal Auditor for ISO 9001-2000. Keep monitoring the spare available. To prepare the department activities to the monthly report and submit to the head of department.

------------

EDUCATION & CERTIFICATION:
------------
Bac.Eng (Mechanical/Syetem)

ADDITIONAL INFORMATION:
------------
Plant Maintenance Exposed

Total Preventive Maintenance:
- Management method in schedule, frequency, work requests a work instruction.

Familiarization:
- Tool and equipment for maintenance.
- Precision alignment procedure.
- Various types of pump and accessories.
- Control and manual valve.

Technical specification:
- Material of construction and fabrication specification.
- Mechanical tolerance.
- Bolts and nuts, belts and chain standard.
- Bearing specification.
- Material specification.

MANAGEMENT COURSE
- Problem solving and decision-making - Kepnor Tregor Method.
- Managing finance ¡V setting and achieving budget.
- Managing project.
- Managing strategically.
- Managing skill.
- Managing operation ¡V manufacturing.
- Emergency Respond Plan (ERP) -Niosh

COMPUTER SKILLS:
- Microsoft office and Lotus Application ¡V intermediate.
- AutoCAD 2000
- Management/OS Software: CMMS Oracle, Lotus Approach, AS 400 IBM
- Setup and install new hardware and software for PC

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6251 to 6300 of 15505)

Go to Search Parameters...

Brief Description

Instrumentation Design Engineer with 5 years experience in Petrolium,Oil&Gas,Fertilizer EPC projects. Knowledge of INtools,AutoCAD,Instrucal,PDMS,Flowel,conval. Knowledge of instrument specifications,loop drawings,JB schedule,INdex,I/O list,Technical Recommandations,Hookup,BOM,wiring

COMPUTER LITERATE MS Excel .MS Word. MS Power Point, (CMMS) Main Saver : JDE Edwards and Maximo & Electrical & Instrument Technician

B.Tech mechanical Mechanical Sr. Sales Executive in Leading MNC.

• Knowledge in Geochemistry, Geophysics, Well Logging, Oil Phase, Structure Drilling, and Direction Drilling and Economic Geology, mud operation ,oil gas analysis ,3D interpretation , Well testing operation.

I have been actively involved in the world of mapping for more than a decade and I take great pride in the art of mapping from start to finish. In every job that i oversee it is my goal to achieve the highest level of accuracy to provide the best possible data.

Skilled Production Technician

Hotel&Resteraunt Management Certification Thomson Education Direct

Technical Sales manager - Electrical Engineering

Caterpillar field service engineer

Reliability, maintainability & logistics, welding inspector, Mechanical engineer

Objective: Joining Challenge job in a progressive organization in which I can be best utilized and developed according to my abilities and performance efficiency.

DETAIL qa / q WORK IN PIPING

To become an asset to your Organization using my Technical, Communicative and Managerial skills to increase Productivity with a schematized mode of Safe, Reliable operation.

Construction Superintendent

Offshore Maintenance Supervisor FPSO Experience, Heavy Oil Experience

Piping Designer, MicroStation, Power (Nuclear, Fossil, etc.), Petrochemical, Chemical, Heavy Industrial.

Industrial Maintenance Electrician 442A, Industrial Electrician, Instrumentation and Control Technician 447A, Instrument Mechanic, Electronic Technologist, Electrical Maintenance Technician

Construction Laborer Expert 0-2 years Customer Service Face-to-Face Support Expert 10+ years Engineering Applications / Technical Support Strong 5-10 years Engineering Electrical Strong 5-10 years Engineering Field Service Expert 10+ years Engineering Maintenance Expert 5-10 years

I am mechanical engineer having 17 years of experience in oil and gas construction industry both onshore and offshore. Currently located in Tunisia with petrofac for their onshore gas development project. I am well familiar in all standards and codes applicable for industry,

To participate in periodical inspection and testing of all static equipment of process plants and pipelines to analyse the condition of the equipment.

Executive Mechanical at Megasteel Sdn Bhd under repair and maintenance, As Mechanical Engineer at Stagno Tech Sdn Bhd aslo under repair and maintenance Banting, Selangor

Health & Safety Professional, Post Grdadute Diploma, Various HSE Courses & Certifications Completed.

Accounts upto finalisation,Tally 7.2, MS Office ,Administration& Logistic , B Com

Senior Inspector, CSWIP 3,2 + RAD. Interpretation

I am a mining engineer and I do work in South Africa for the past 11 years also I do have a MSc degree in mining engineering and more than 10 years experience in underground mining (gold and diamonds), and currently working for De Beers for the last 5 years

Exposed in several construction company involved in Engineering Procurement Installation Commissioning and Build Operate Transfer type of Contract at Oil & Gas, Petrochemical and Power Plants. In addition to that I’ve been in the Operation and Maintenance a couple of years at the Refinery and Petroc

47 years old. 30 of those years have been in the oilfield all over the world, currently consulting, but have been drilling superinentant, tool pusher, and on down. have worked my way up from the bottom. i am looking for a drilling superientants job now

Extensive hands-on experience in construction project administration & accounting

15 years expeirence in operations geology (oil and gas)

Holds an NVQ Level 3 in complex Processes, also City & Guilds in process plant operations. Studying for a number of City & Guilds in Oil and Gas process Separations.

PROFILE Highly motivated, technically minded team player with proven managerial skills, and various nuclear, engineering and power plant testing experience – in locations worldwide.

I am very keen to work in the offshore oil industry. I have been thinking about it since some years ago, so that idea is already very mature. I am willing to start at the bottom. Therefore, I am looking for a job as a Roustabout.

Over 40 Years Quantity Surveying/Cost Estimating experience on projects in Ireland, England, Australia, Greece, Middle East and the USA. Largest project: Headed the US office working on King Khalid Military City , North Eastern Saudi Arabia ($6 Billion for the US Army Corps of Engineers)

Self-motivated & hard-working Drilling Superintendent / Company Man with a vast experience spread over 29 years in well reputed National & International E&P Companies.

Over 25 yrs experience in Drilling industry, ten at toolpusher level and last seven at senior tool pusher level. Mostly offshore on semi-subs,jack-ups and drillships.

Melbourne, Australia Logistics Professional Have worked in many countries around the globe Extensive global knowledge of general freight movement, heavy lift and transportation requirements. Heavy shipping & barging, including barge landings.

Construction Manager/Superintendent in Design Build

20 years overseas experience

I am currently looking for a construction assignement overseas, in the fields of instrumentation or building management systems.

Certification as a machinist, supervisor, Engineer, & licensed teacher + 25 years in 16 countries machine service centers (GE, Sulzer), supervise overseas workshops (Badak LNG), start-up & commissioning, chemical plants field supervisor (Dow, Mobay) trouble shooter (Brown & Root, GE),

29 years experience in Quantity Surveying, Commercial and Contracts Management in the oil & gas, nuclear and petrochemical industries. Experience in all aspects of pre-contract engineering and post-contract administration under various contracting strategies and formats.

Senior buyer with more than 20 years exposure to both the on- and offshore oil and gas / petrochem sectors and has executed materials / procurement activities for a number of world-wide projects during various project phases.

I’m interested in a Marketing Communications Director position. With over thirty years of experience, I can bring a high level of creativity as well as the ability to initiate and take small or large projects / events from concept to execution while managing all stages of the development.

Qualified and experienced in the construction/engineering and agricultural sectors - seeking position in the Middle East in one of the above areas. British Passport holder.

I have over twenty years experience in procuring, coordinating and delivering all logistical equipment needed for drilling, construction and production for oil/gas and natural gas operations. Extensive experience in J.I.B. Exceptional ability in the skill of negotiating

Diamond Drilling Foreman(FSU)

I am a 58 year old Vietnam Veteran. I believe that safety comes first on the job-site, and it is of the utmost importance to do the job correctly the first time in a professional manner. I do not believe in problems only solutions.

Management, supervision, operations, maintenance, preventative maintenance, troubleshooting, problem solving, training, plant construction and start-up work in power plants. This includes coal fired and diesel generators, co-generation plants, Gas Turbine/HRSG, Combined-Cycle Generation.

I am a SHE Manager with 20 + years experience in the diverse aspects of Safety, having developed and implimented programmes on large construction sites Qualification wise I have completed my indentures a Plater welder and a 4 year Higher National Diploma in Safety Management

Underbalanced Drilling, UB Drilling, Air Drilling, OHSE Managment, Operations Manager Drilling Consultant, Toolpusher

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 [ 126 ] 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out