Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #52367
next resume »»
CONTACT INFORMATION:
View contact information...
Qualifications for Management/Maintenance Expert
Summary
Over 25 years of progressive experience in Aviation maintenance and leadership, four of which were in CH53/CH46 helicopters with the US Marine Corps. Confidently manages maintenance and operations in a fast-paced environment. I am skilled and resourceful in problem resolution, customer relations, personnel management, maintenance, planning, execution of all assigned and self generated tasks along with facility upgrades and maintenance. Being highly experienced and competent in Mechanical/Electrical/Electronics/Pneumatics/Hydraulics/Sheetmetal, along with any combination of these systems or sub-systems.
Areas of Focused Experience
Operations Management * Project Management * Facility Management
Quality/Budget Control * Project Planning * Process Improvement
Team Building/Facilitation * Training/Development
Client-Customer Services * Research
Maintenance Dept. Leadership * Personnel Evaluations * Maintenance Tooling
* Dept. Operations * Maintenance Program Monitoring & Management
* New Aircraft Acquisition & Acceptance Team
* Equipment evaluation and purchase
* Risk Assessment and Department Safety Team member
Professional Highlights
* Saved Owens Corning $250K in maintenance costs by performing all maintenance work in-house.
* Reduced aircraft inspection time by 50%-75% by implementing purchase of a two-man articulating electric lift.
* Increased productivity at Cessna by cutting the time required to complete certain jobs by 50% through the fabrication of new tools and design of new procedures.
* Maintained a 99.5% dispatch rate for the Owens Corning flight department by ensuring the department was always at a state of readiness through constant analysis, adjustments, organization, and delegation of assignments.
* Brought to the attention of company executives "Citation Special Olympics Airlift": (using corporate aircraft to transport event athletes to the 2006 Games in Ames, Iowa.) One corporate aircraft now dedicated to support the "Citation Special Olympics Airlift" for 2006.
* Performed the duties of the DOM (Director of Maintenance) at Owens Corning during the last 6 months of 2005 and well into 2006 while current DOM oversaw additional temporary duties. Maintenance scheduling/planning, personnel issues, oversee budget, oversee parts requisitioning, tooling purchases/research, oversee minor and major inspections of Citation Sovereign (3), Hawker (2), and Falcon (1) aircraft in house along with outstation contract maintenance, maintained log books.
Employment Profile
Owens Corning Fiberglass, Assistant Director of Maintenance 1997-present
Manage the safe completion of all aircraft maintenance, ensuring compliance with industry and FAA standards. Troubleshoot system problems and performed necessary repairs. On a daily basis supervised six personnel in aircraft maintenance department. Interface with aircrews, office personnel, and the Director of Aviation Services. Serve as a mentor to junior co-workers. Work with clients and customers to ensure effective communication and satisfaction. ISBAO certification process, Lock/Tag/Try development for Aviation Department to align with corporate safety initiative. Point of contact with manufacture to resolve aircraft issues, parts failure descriptions, warranty claims, Cescom and CAMP record keeping, also contact for various vendors with equipment and furnishings items, hanger items as well.
F.R. Savage Landscaping LLC, President 1989-2006
Founded this small lawn care and landscape business from the ground up. Designed and installed customized landscapes for customers. Produced high-quality work on time and in budget, resulting in a 90% customer referral rate. Performed the design, sales, presentation, budget, ordered hard/soft landscape supplies, set up time frame to satisfactorily complete installation, ensured area was organized and cleaned each day, customer satisfaction upon completion so that all parties remained on good terms. Follow up call to complete the customer satisfaction process.
National Flight Services, Crew Chief/Inspector 1990-1996
Managed aircraft maintenance projects, including all scheduled and unscheduled maintenance, working with other departments to facilitate the timely completion of any and all maintenance projects. Worked with a four-member crew to complete all work on time, within budget, and according to manufacturers guidelines and FAA regulations. Inspected the work of other mechanics and signed off as required. Pre and post ran aircraft for troubleshooting, to set a reference for the post inspection run. Accompanied aircraft on post inspection test flight, upon return to repair facility, resolved any new or still outstanding "gripes" and other customer issues.
Cessna Citation, Assistant Crew Chief 1984-1990
Assisted with scheduled and unscheduled customer aircraft maintenance, including researching and ordering parts as well as customer relations. Ran aircraft before and after maintenance. Lead a team of four mechanics in the absence of the crew chief completing SB's, SL'S, AD's, inspection and warranty items as well as swqks. Was an on the road mechanic being sent to various locations to work customers aircraft either in their facility or at remote locations with minimal tooling and assistance.
Education & Training
B.S. in Aviation Management and B.S. in Aviation Maintenance Technology, Hamilton Univ.
Airframe and Powerplant License, Spartan School of Aeronautics
Continuous Education Training: Aircraft Systems Flight Safety Training Series: Flight Safety International; Cessna Citation Maintenance Training Series; Flight Dynamics: Heads Up Display Systems Training; Management classes within company and external.
Honorable Discharge U.S. Marine Corps
Airframe Experience:
CH46
CH53
Citation I
Citation II
Citation III
Citation SII
Citation Sovereign
Commander 680/690
Diamond
Falcon 50/900EX
Hawker 800
King Air 90/100/200/300/350
Merlin/Merlin Metro 226/227
MU2
APU:
GTCP 360
Hamilton Standard
RE 100 CS
Turbo mach
Sundstrand
Engine Experience:
GE T 64
JT 15
PT6
PW306C
TFE331/731
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 1601 to 1650 of 15498)
Go to Search Parameters...
Brief Description
Over 22 years in Plant Operation in round the clock shift duties.
Proffesional, time served Ready Mixed Concrete technical manager. Concrete specialist with over 25 years management experience in UK, Hong Kong, Macau, China and S.E. Asia.
Oil Industry 37 years, Regulatory, Environmental, Safety 28 years,
Man Management, Customer Care part 1,2,3 , Complaint Handling, Radio Telephony, Fleet Management, Assertiveness
I am currently holding an AVP position in telecommunication company working under the network group. I am a network governance officer who implements/monitors all actionable instructions in the Mancom proceedings.
Worked in Irak, and Afghanistan , still have valid Work Permit and visa for Afghanistan, Gen technician
I am a highly motivated, hardworking and versatile individual with a strong commitment to excellence in quality workmanship. I believe my experience, knowledge, dedication and willingness to handle and adapt to new challenges would prove to be most valuable to your company.
Sr.PDS/PDMS Piping Design Engineer/Designer / PDS Administrator /Lead piping Engineer/Designer.
A Mechanical Engineer with 20 + years of experience in O&M of large Diesel engines and various machineries in power plant and marine industry
Senior Executive with more than twenty years of experience, many of them abroad.
Project / Engineering of facilities for the domestic and international oil and gas industry with emphasis on Structural and Foundation Engineering. Strong knowledge of processing, and construction of platforms, pipelines, platform drilling /workover rigs, etc.
Education from both China and United states major in transportation engineering and computer science. As a transportation engineer with more than 10 years¡¦ experience in both United States and China, his work extended from general transportation infrastructure design, transportation plan
I have extensive experience in Cu/Mo/Au Concentrators working in the US and Chile in both technical and operations side of the business. My experience includes, conventional crushing and ball mill operations as well of SABC circuits.
Offshore Oil & Gas Paramedic
Fifteen years of experience in Refinery, Oil & Gas and Petrochemicals field as a Piping designer in producing plot plans, Equipment Layout, Piping General Arrangement Dwgs, Piping isometrics, Jacketed piping isometrics, M.T.O., Stress isometrics, Sketches, Nozzle orientation and as-built Drawing on
Heavy civil construction skills. Concrete apllications and procedures. Sediment and erosion. Overhead and underground utilities construction. Heavy equipment operation. Regulatory laws pertaining to heavy construction.
Servicing oil and gas wells; running/pulling tools ,well clean outs using nitrogen
Equipment operations
I have had the opportunity to work either in extractive pyro or hydrometallurgy coupled with a strong background in computing . I am doing my best to be aware of all step made in metallurgy. I am honest, experienced leader and team builder. I accept also to relocate with my family.
Marine Surveyor
chemical engineer in pakistan steel mills
I am an IRCA (UK) Registered QMS 2000 Lead Auditor, currently working QA/QC Manager with an EPC Company for Yemen LNG Project, Balhaf site, Yemen.
Maintenance planning, projecting, implementation, monitoring, management, highly experienced in these areas.
Operation Management for FPSO / FSO
Petroleum Engineer with extensive experience in Drilling, Operations, Drilling Management. Trained in: Offshore, Onshore, Inland-waters. HTHP wells, Gas wells, Horizontal drilling.
Engineering professional with 17+ years of experience within diverse oil, gas field, refinery and petrochemical industrial arenas. Expert level engineer for instrumentation and control disciplines.
Reliability / Maintenance / Rotating Equipment Engineer with 20+ years of experience in Oil / Gas / Petrochemical / Utility industries.
Experience with handling database and managing data. Very familiar with writing database queries in SQL, as well as developing database scriptings. Industry expert in data quality.
Over 13 years of solid experience in piping stress/pds design for Refineries,petrochemicals,fpso&power projects.
To present my background and what I can do in the company with my skills.
FOR THE POST OF QUANTITY SURVEYOR (BUILDING SECTOR)
Skilled mining enginner (blasting engineer) and of upto 12 to 13 years experiance
Saudi Aramco Approved Vendor Inspector SAP No. 70004827, Certified API-510, Cswip 3.1, NDT Level2, ISO 9001.
13 years oil industry experience,• Drill wells up to 6500 mt, High temperature gas wells, drilling of horizontal multi-lateral hole, sidetracks, H2S Environment,Run 5 1/2" expandable liner & Run 4 1/2" completion assy., with 4 1/2" liner cemented off bottom
Sales Professional
Analytical, communication, result oriented, and learning for development
Experienced Operational personell in the field of oil and gas / petrochemical with commissioning experience
Geophysicist with over 12 years experience in various aspects of geophysical works. Proven solid experience in: 2D/3D seismic interpretation, Velocity Modeling, Acoustic/Elastic Inversion, AVO/AFI analysis,Seismic Inversion
Designation project supervisor in higher risk environment
I have master degree in mining engineering and i have 10 years experience in mining engineering field such as open pit mining and underground.I worked in coal underground mines, marble,florin,copper andmanganeze mines.i was the member of American society of minning ,metalurgy and petrolium engineer
Mechanical engineer graduated in 1991 from Damascus university (machinery department)since that date (15 years experience in oil and gas industry in onshore and offshore)I have been in several companies(SPC,SCOT,Alfurat petroleum co with SHELL in their gas plant.
Certified PMP having rich experience in EPC & construction management of Real Estate, Infrastructure and Petro-chemical Projects, Proficient in Primavera, MS Project and MS Office
20 years experience in process and laboratory analyzers in refinery and Petrochemicals operations world wide. Graduate degree in analytical chemistry. Willing to relocate.
Maintenance Planning & Scheduler for 30 years in Industrial Setting
Sr. Civil Structural Designer
B. Com. 16 years of experiences different construction materials such as soil, aggregates, concrete & asphalt laboratory & field test & Prepared test reports by using computer.
MC Driver and Chef
Working as Well Site Geologist for Oil Field Instrumentation, India. Our client is MEDCO international an Indonesian company. Presently I am working in Oman. I have worked in the following fields of Oman: Simsim, Warad, Basma and Irad.
Maintenance Welder/Fitter with strong background in Plant Maintenance
PANEL AND FIELD OPERATION
First
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
[ 33 ]
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Goto Advanced Search...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com