Resume - Mechanical Engineer, with over seven years of experience in construction for Pet...

Misco Jobs

Resume #5301

CONTACT INFORMATION:
View contact information...

RESUME

PERSONAL INFORMATION:

PROFESSION: MECHANICAL ENGINEER
CERTIFIED ASOCIATED WELDING
INSPECTOR OF THE AMERICAN WELDING
SOCIETY (AWS) CAWI 03070654

DATE OF BIRTH: Quito, May 21th 1970
IDENTY CARD: 171031994-6
MARITAL STATUS: Married

STUDIES:

UNIVERSITY: National polytechnic school, mechanical engineering school. Degree: Mechanical Engineer.

HIGH SCHOOL: National High school Juan Pío Montufar. Degree: Bachelor of sciences.

OTHERS:
LENGUAGES:

* Bilingual English-Spanish

SEMINARIES:

* Certification seminar and exam, in order to obtain CWI (Certified Welding Inspector) from AWS (American Welding Society) June 2003. CARACAS, VENEZUELA, PDVSA
* Pipelines Inspection, National polytechnic school.
* Basic pneumatic, National polytechnic school.
* Protection against corrosion, National polytechnic school.
* Quality control, National polytechnic school.
* Personnel management, National polytechnic school.
* Safety, MINERA ESCONDIDA, ANTOFAGASTA – CHILE.

EXPERIENCE:

PERENCO ECUADOR. 60 Km pipeline 16"
Dignity: MECHANICAL INSPECTOR.
Duration: From June 2003 to November 2003.
Activities:
* Inspection of mechanical works at Yuralpa-Puerto Napo Pipeline project.
* ROW Inspection
* Welding Inspection.
* Coating Inspection.
* Cathodic protection inspection.
* Lower in, back fill Inspection.
* Cleaning and Hydro test Inspection
* Inspection on shop of vessels manufacture, according with code ASME VIII.

OCP PROJECT 450 Km pipeline 42" – 32".
Dignity: MECHANICAL INSPECTOR.
Duration: From September 2002 To June 2003.
Activities:
* Inspection of mechanical works at OCP project, including pipeline and pumping stations.
* Inspection of hydro test of tanks and pipeline.
* QA/QC

WASHINGTON GROUP
Dignity: FIELD ENGINEER, QA-QC INSPECTOR
Duration: From April 2001 to September 2002.
Activities:
* Construction inspection (civil and – electromechanical works) at the erection of a generation plant (plant simple cycle 130 MW with two independent combustion turbines General Electric type 6FA), electric substation and transmission line at MACHALA POWER project.
* QA/QC, assurance of designs and specifications compliance.
* Documents control.
* Welding inspection.
* Coating Inspection.
* Hydro test Inspection.
* Pre commissioning.

AZUL COMPANY
Dignity: PIPING ENGINER
Duration: From December 1999 to March 2001
Activities:
* Construction and installation of piping for Centrilift pumps at Villano project
* Construction and installation of piping for recirculation loop at ARCO´s Company Baeza station.
* Construction and installation of piping at AGIP´s central process facilities in order to increase the booster pumps performance.
* Construction and installation of piping at AGIP´s central process facilities in order to increase pumping to secondary pipeline.
* Quality control.
* Pre commissioning and commissioning.

AMOTER COMPANY.
Dignity: FIELD MANAGER
Duration: From May 1999 to September 1999.
Activities:
* Installation of thermal insulation on piping and equipments at ARCO ORIENTE´s central process facilities.
* QA/QC.

ARCO ORIENTE INC. VILLANO DEVELOPMENT PROJECT. 140 Km 16"
Dignity: PIPELINE INSPECTOR.
Duration: From January 1999 to May 1999.
Activities:
* Inspection of welded joints externally coated with FBE at secondary pipeline CPF – Baeza.
* Inspection of coating repairs with FBE and epoxy resins.
* Visual Inspection of welded joints at secondary pipeline CPF – Km 22
* Inspection of ditching, lower in, and fiber optic installation at secondary pipeline Cosanga – Baeza.
* QA/QC.

COMMERCIAL RESINS COMPANY, GAS ATACAMA PROJECT, Segunda Región Chile – Antofagasta. 435 Km 24" – 16"
Dignity: COATING SUPERVISOR.
Duration: From July 1998 to January 1999.
Activities:
* External coating on welded joints with FBE and TLP over a 435 km gas line.
* Quality control of coated joints.
* Reparation of damaged coating with T.L.P. and F.B.E.

COMMERCIAL RESINS COMPANY, MONTURAQUI MINERA ESCONDIDA PROJECT, Segunda Región de Chile. 75 Km 42" – 36"
Dignity: COATING SUPERVISOR.
Duration: From February 1998 to July 1998.
Activities:
* Internal coating on welded joints with FBE over a 75 km pipeline.
* Quality control of coated joints.
* Reparation of damaged coating with F.B.E.

CONTROLIMINSA C.A.
Dignity: TECHNICAL MANAGER.
Duration: from august de 1997 to January 1998.
Activities:
* Heat treatment on piping systems, at Esmeraldas refinery.
* Heat treatment on high-pressure pipe at Daule – Peripa project.

TECNICAS REUNIDAS – SANTOS – CMI – TAMOIN, REFINERY ESMERALDAS EXTENSIÓN PROJECT.
Dignity: PIPING SUPERVISOR.
Duration: From March 1997 to August 1997.
Activities:
* Welding Inspection on piping spools.
* Personnel supervise.
* Material Handling.
* QA/QC on field.

ESCUELA POLITECNICA NACIONAL, Mechanical engineering school
Dignity: ASISTENTE DE CONFORMADO MECANICO.
Duration: From October 1995 to March 1997.
Activities:
* Heat treatment on ferrousus and non-ferrousus metals.
* Visual inspection and other NDE Methods on welded elements.
* Design and construction of laboratory equipment.
* Quality control on metallic and non-metallic materials.

OTHERS: ADITIONAL EXPERIENCE:
* Knowledge of Civil works: soil, piling, concrete, anchors, etc.
* Installing rotational equipments like pumps, generators, etc.
* Tanks erection.
* Handle software: CAD, WORD, EXEL, etc.
* Knowledge of steel heat treatment.
* Knowledge of documents governing welding inspection and qualification.
* Knowledge of international Codes and standards (AWS, API, ASME, NFPA, ACI, AWWA, etc)
* Knowledge of metal joining and cutting process.

References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9551 to 9600 of 15341)

Go to Search Parameters...

Brief Description

Skills: Architectural/Engineering: Well trained and experienced using AutoCAD 2000LT to AutoCAD 2009, PLS-CADD, Microstation V8, Artist Rendering, Illustrations, Freehand Sketches, 2D Modeling, CAD Presentations

Interpersonal abilities, Communication skills, 25 years of supervisory experience, Organizational strengths, Analytical/problem solving skills, Administrative, coordination, and management skills, Strong initiative

Seeking a challenging career with in a reputed Company

Proficient in Document Management System & Secretarial Functions

This is essakkipandi, I have 6 years experiance in oil & gas industryI am working in Flour daniel India )p) Ltd,Delhi as Instrumentation Designer. I have studied Diplomo in Electrical & Electronics Engineering, Now i am lookink for Instrument designer join in USA.

Mechanical Engineer with 3 years of experience in electrical instalations

More than 6.5 half years in Documentation with Oil and Gas Related Projects and have a very good expossure in Programming

B.E Civil - 2001

Has been working for an EPC company for eight (8) years with experience in handling such projects of different magnitude both Onshore and Offshore, from grass roots to revamps, tender, FEED (Front End Engineering Design) then to engineering & procurement. Knowledgeable in INtools.

Free! I am a production geologist with over 15 years experience across a wide range of commodities including base metals, copper and gold in both open cut and underground environments.

Total 9.5 years DOCUMENTATION experience including QA/QC, CERTIFICATION and PROJECT DOCUMENT CONTROL CENTER in GAS and OIL Projects with Multi National Companies.

Engg.graduate with exp.in projects at various Breweries in India

actual position: Senior well site geologist

Having a long-lasting interest in mineralogy, I am willing to find a job that will allow me to use and expand my knowledge and analytical skills in the field of mineral exploration.

Senior Qa/QC For Oil/Gas Projects

Senior Electrical/Design/Project Engineer for HV and MV substations

Environmental Health & Sustainability (EHS) specialist with project management and consultancy experience in political and corporate environments. Keen ability to build internal/external consensus to implement projects, start to end. Effective communicator with

Proficient in drafting submittals (2D & 3D) and/or shop drawings prior for construction up to As-built Drawing. Multi-disciplined: Architectural, Structural, Mechanical (including Plumbing & Piping, HVAC, and Fire Fighting), Electrical (including Lighting, Grounding, Telephone & Data, Fire Alarm, a

Qualification; B.Sc (chemistry), Skills; plant operation, precommissioning and commissioning

About eight years of solid experience in designing and implementation(execution) of structural works

LP Modeling, Refinery Planning & Scheduling, PIMS, Process Simulation and Optimization

Certified PMP, with Onshore & Offshore Projects Experience with good Communication skills. Qualified Mechanical Engineer with Project Management skills & Leadership qualities.

Diploma in Chemical technology, 14 years oil field operations experience in onshore and offshore in India and State of Qatar

My working career is coverd with Petrochemical plant structural detail design and offshore jacket type platforms basic and detail design.In the field of offshore i am qualified in in-place, earthquake, dynamic, spectral and determinestic fatigue, transportation, lifting and lunch analysis.

Operating reciprocating compressors [5.3mw] and centrifugal compressors [3.5 mw], multistage centrifugal pumps, various types of dosing pumps etc. Handling various liquids such as LPG, naphtha, kerosene, gasoline and gases like refinery fuel gas, hydrogen etc.

Graduate Research Assistant, University of Nevada, Reno (Jan 2004-present)

A challenging and rewarding position as a Instrumentation Technician in the semiconductor or semiconductor equipment industry.

Obtain experience on Environmental Design and Environmental Health focused in Soil, Water and Air Quality Management and/or remediation.

a team player, dynamic, can work under pressure and divers climatic condition and region, ready to learn and knowledgeable

Seeking a position in environmental engineering utilizing knowledge, skills and experience in water and wastewater treatment and design and waste management.

Piping Engineer - Stress analysis specialist engineer high pressure and temperature piping. Worked with Babcock, Mitsui and presently working with UHDE.

I'm a masters student in the department of Environmental Engineering, University of Missouri - Rolla, USA . I will be graduating in august 2004 and looking for an entry level environmental position. My resume give additional information regarding my background

Mechanical Engineer, with over seven years of experience in construction for Petroleum/oil/gas/power industry. I am certified associated welding inspector CAWI. QA/QC experience

My enhanced qualification & vast experience in developing motivational behaviour & team work among the personnel in the field of Industrial Security & Safety will be appropriate for your reputed organization.

Successful Project/Design Engineer experienced in cutting edge engineering technology. Outstanding record of achievement in managing projects from concept stage, to engineering design, to 1st prototype, to final product.

Consultant Managment to give a support for selling the product.

14 years Open cut mining experience with various makes and models of Earthmoving Machinery, 12 months experience over seas as an Expate in Africa. Currently in a supervisory role looking after field service personnel and workshop personnel.

An experienced geophysicist with a Master's degree in Exploration geophysics and a second-class upper degree (with honours) in geology with interests in field geophysical surveys, seismic processing and geophysical data interpretation.

Camp Supervisor Unit Manager English and French Teacher Sales Representative English Teacher (Sociology and Politics Departments)

BRIEF PROFESSIONAL SUMMARY 8 years professional experience in the Supply Chain functions namely Procurement, Logistics, Export-Import, and Materials & Warehouse management with Global Corporate Giants like Texas Instruments, Wipro, Godrej & Hindustan Lever.

With over 8 years of extensive experience in detailed piping design of oil & gas, petrochemical, refinery, onshore plants. Has the ability to do piping layout/design which include pipe support design, MTO check, generation/checking of isometric drawings (isogen)for fabrication.

I'm an apprentice trained Instrument Technician, trained by a major oil company. I have since gained a wide range of experience at technician and supervisor level in both commissioning and maintenance.

seeking a position in the construction ,design and research field preferable in Water Resources projects in order to have more experience and to work globally, to be able to apply my professional interest in the field of Water Resources and Environmental Engineering.

As you can see from my resume I am very familiar with engineering work through my education at the University of Pittsburgh at Johnstown and with my employment in different engineering fields after my graduation.

Seeking to advance my Mechanical Engineering career in the Oil and Gas Industry of the Houston, Texas area. I am a quick learner and detailed oriented.

Field Service Technician-National Oilwell Varco. Global installations, upgrades, maintenance, or troubleshooting of drilling equipment. I also served as a Pneudraulics Systems Specialist for the United States Air Force. I repaired and maintained numerous aircraft in adverse conditions.

Recent graduate with an MSc in Environmental Studies (Environmental Management Systems) and a BA(Hons) in European Business Studies. Extremely keen to have the opportunity of working within the any function in the oil and gas industry.

Experience in Construction of Power House, Highway Roads, High-rise Buildings, Canals, Air Ports, Aero Bridge ,Delhi Metro Rail, Commercial and Residential Multi Story Buildings ,Water Tank, Guest House , Domes. Familiar with ISO 9001,ISO 14001 and Safety systems.

30 year old dynamic electrical power systems engineer available for immediate relocation.

Please accept my resume for consideration.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 [ 192 ] 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out