Resume - Sixteen years experience in inspection such as Piping and Structure Inspector, P...

Misco Jobs

Resume #53126

CONTACT INFORMATION:
View contact information...

List of present & previous Company

Jun 2006 to present: Carigali Hess Operating company Sdn. Bhd.
Nov 2004 to May 2006: OGP Technical Services Sdn. Bhd.
Nov 2003 to Nov 2004: Arashins Services (J) Sdn. Bhd.
August 2003 to Oct 2003: K & K Sepadu Sdn. Bhd.
July 2002 to July 2003: Arashins Services (J) Sdn. Bhd.
Feb 2002 to May 2002: Yongchan Jaya Engineering Sdn Bhd
April 2001 to Jan 2002: Alstom Export Sdn. Bhd.
Sept 2000 to Feb 2001: Amerstrand Engineering Sdn. Bhd.
Sept 1999 to May 2000: Malaysia Shipyard and Engineering Sdn. Bhd.
March 1999 to July 1999: Penang Shipbuilding and Construction.
June 1998 to Feb 1999: Gunawan Iron and Steel Sdn. Bhd.
June 1996 to May 1998: Time Salam Lavalin Construction J.V.,SNC & GTMI J.V.
Dec 1994 to May 1996: Teknispek Sdn. Bhd.
Nov 1993 to Nov 1994: Sime Sembawang Engineering Sdn. Bhd.
July 1992 to Nov 1993: Malaysia Shipyard and Engineering Sdn. Bhd.

COURSE ATTENDED
July 2006: Incident Investigation course
Conduct by Risk Global Technologies Sdn. Bhd.
Kuala Lumpur.
June 2006: Basic Offshore safety,Sea survivaland helicopter underwater
Escape training, basic fire fighting, first aid CPR/EAR.
Offshore safety Sdn.Bhd. Kuala Lumpur.
May 2001: Construction Industry Development Board Malaysia (CIDB)
Supervisor for Mechanical Works
August 2000: Welding Inspector – CSWIP ( RTO / QA7 )
Ruane & T.P O'neill. TATI Terengganu.
Sept 1994: Magnetic Partical Inspection Course
Organised by Mr. Saharuddin Kambari
NDT Level III from NDE Consultancy Services
June 1994: Total Quality Management (TQM)
Conducted By Mr. Azaddin Aziz
QA/QC Manager
Sime Sembawang Engineering Sdn. Bhd.
Pasir Gudang Johor.
Nov 1993: In House Training – ASNT Level II
MPI and DPI
Sime Sembawang Engineering Sdn. Bhd.

WORKING EXPERIENCE ( 1 )

Turn Around / Shut Down Jobs

Nov to Dec 2002: Corro-shield (M) Sdn Bhd. Miri Sarawak
Position: Inspector
Location: Petronas Methanol (Labuan) Sdn. Bhd.
WP Labuan. Sabah.

Jun 2002: Arashins Services (J) Sdn Bhd
Position: Inspector
Location: 1) Kaneka (M) Sdn Bhd, Gebeng, Kuantan
2) Petronas CUF (M) Sdn Bhd, Kertih, Terengganu

May 2002: S.E.M Inspection Sdn Bhd, Shah Alam, Selangor
Position: Inspector
Location: PSR-1 Turn Around May 2002
Petronas Penapisan Melaka Sdn Bhd
Sungai Udang, Melaka

July 2000: Pakaruji Sdn Bhd.
Position: Inspector
Location: FPG Oleo chemical Sdn Bhd, Kuantan, Pahang

WORKING EXPERIENCE ( 2 )

Jun 2006 to present: Carigali Hess Operating Company Sdn. Bhd.
Position: Structural Welding Inspector
Project: Brown field Construction (Fast Track Project)
Cakerawala Gas field Development Phase 2
KHL yard. Lumut Perak.

Scope of Work: Monitor All welding NDT activities as per contract requirement (structure and Piping).
Review NDT result and witness Welder Qualification
Test (WQT) to qualify welder.
Signing inspection report of acceptance of all the above inspection results.
Monitoring contractor work activities to ensure all works are performed in accordance with the specification and procedure.
Report to the Client Site Representative (CSR) for area assignment.
To monitor weld summary record and compile for the final documentations
Monitor tie-down jobs during load-out activities

Nov 2004 to May 2006: OGP Technical Services Sdn. Bhd.
( A Member of PETRONAS Group of Companies)
Client: Petrodar Operating Company (PDOC)
Republic of Sudan,
Position: Welding Technical Inspector
(Project management Consultant)
Project: Central Processing Facilities (CPF)
Al-Jabalayn site
MELUT Basin Oil Development Project
Block 3&7 (Upstream)
Republic of Sudan,

Scope of Work: Monitor all welding and NDT activities as per contract requirement (piping, tanks. Pipeline, mechanical and pile caps)
Review NDT result and witness Welder Qualification Test
(WQT)to qualify welder.
Signing inspection report of acceptance of all the above inspection results.
Monitoring contractor work activities to ensure all works are performed in accordance with the specification and procedure.
Report to the site manager for area assignment

Dec 2003 to Nov 2004: Arashins Services (J) Sdn. Bhd.
Taman Rinting, Masai, Johor Darul Ta'zim
Client: Sime Sembcorp Engineering Sdn. Bhd.
Pasir Gudang, Johor.
Position: Structural Welding Inspector
Project: Talisman Energy
East Bunga Raya BR-E CO2 PLATFORM.
: West Africa Field Development FPSO Project
MODEC International LLC. Singapore.
(Fast Track Project)

Scope of Work: Liase with client representative and PMT on matter related to quality.
Perform Inspection as per ITP.
Monitor of all welding activities during fabrications
Request NDT on Complete joint as per contract requirement
To monitor weld summary record and compile for the final documentations
Monitor tie-down jobs during load-out activities

August 2003 to November 2003: K & K Sepadu Sdn. Bhd.
Petaling Jaya, Selangor.
Client: Gas Malaysia Sdn. Bhd.(GMSB)
Position: Pipeline QC Supervisor
Project: EPCC of NGDS to Super Food Technology (6 inch-1.75km)
Mukim Plentong, Masai, Johor Darul Ta'zim.

Scope of work: Witness and monitoring welding activities,
Fit-up and visual inspection of each weld,
Witness and monitoring holiday testing and wrapping around the joint,
Request and monitoring Radiography activities,
Preparation Pre lowering acceptance report and lower in report, approval for backfill.
To monitor weld summary Record and compile for the final documentations.

July 2002 to July 2003: Arashins Services (J) Sdn. Bhd.
Taman Rinting, Masai, Johor Darul Ta'zim.
Client: Sime Sembcorp Engineering Sdn. Bhd.
Pasir Gudang, Johor.
Position: Structural Welding Inspector
Project: Petronas Carigali Sdn. Bhd.
Angsi C & E Topside and Jacket
(Fast track Project)
Sarawak Shell Berhad
B11DR-A Jacket

Scope of Work: Liase with client representative and PMT on matter related to quality.
Perform Inspection as per ITP.
Monitor of all welding activities during fabrications
Request NDT on Complete joint as per contract requirement.
To monitor weld summary record and compile for the final documentations
Monitor tie-down jobs during load-out activities

Feb 2002 to May 2002: Yongchan Jaya Engineering Sdn Bhd
Johor Bahru, Johor
Position: QA/QC Supervisor – (Structural, Piping, painting)
Project: Gadong Power Station
Brunei Darussalam
Client: Shinwa Corporation Pte. Ltd. Japan
Scope of work: Arrange sub-ordinate to do the job as per client's requirement.
Inspection of all fit-up and visual during fabrication and installation as per ITP.
Perform dimensional check of structure
Perform Welder Qualification Test (WQT) to qualify welder.
Review NDT report before submit to client for review.
Monitor and inspect on painting work after fabrication.
To monitor weld summary record and compile for the final documentation.

April 2001 to Jan 2002: Alstom Power Sdn. Bhd.
Petaling Jaya, Selangor
Position: Piping Inspector
Project: 3 x 700 MW Combined Cycle Coal Fired Boiler
Manjung Power Station, Perak.

Scope of work: Inspection of all fit-up and visual during pre- fabrication and installation.
Perform Welder Qualification Test (WQT) to qualify welder.
Review NDT report before submit to client for endorsement.
Perform line check together with client and sub-
Contractor for any rectification.
To monitor coating work for underground pipe line(fresh water)
To witness for flushing and hydro test, to monitor weld summary record and compile for the final documentation

Sept 2000 to Feb 2001: Amerstrand Engineering Sdn. Bhd.
c/o SIME Sembcorp Engineering
Pasir Gudang, Johor
Position: Qa / Qc Coordinator – Piping
Project: Petronas Carigali Sdn. Bhd.
Angsi- A Topside

Scope of work: Arrange subordinate to do the job as per client request.
Inspection of all fit-up and visual during pre-
fabrication and installation.
Perform line check together with client and sub-
Contractor for any rectification.
To witness for flushing and hydro test, to monitor weld summary record and compile for the final documentation

Sept 1999 to May 2000: Malaysia Shipyard and Engineering Sdn. Bhd.
Pasir Gudang, Johor.
Position: QC Inspector – Structural & GRE Piping
Project: Petronas Carigali Sdn. Bhd.
ANDR-A Topside and Jacket.

Scope of work: Inspection of all fit-up and visual during pre-
fabrication and installations
Liase with client representative and PMT on matter related to quality.
Perform Inspection as per ITP.
Monitor of all welding activities during fabrications Perform line check together with client and sub-
contractor for any rectification.
To witness for flushing and hydro test, to monitor weld summary record and compile for the final documentation.

March 1999 to July 1999: Penang Shipbuilding and Construction Sdn.Bhd
Kemaman Supply Base (KSB) Kemaman,Terenganu.
Position: QC Inspector – Piping & Structural
Project: Esso Production Malaysia Inc (EPMI)
GUD-12 Angsi Host Tie-in and Tabu-11 Gas Injection

Scope of work: Conduct welder qualification test, prepare welder certificate, carry out material inspection, material verification, fit-up inspection, visual inspection, request NDT, interpret RT result, prepare hydro test report, prepare welding summary and prepare manufacturing data report.

June 1998 to Feb 1999: Gunawan Iron & Steel Sdn Bhd
Phase 2 Project
Kemaman, Terenganu
Position: Welding QA/ QC Inspector (Piping & Mechanical)
Power Station Department

Scope of Work: Carry out inspection of structure, piping including underground pipeline (coating work) and pressure vessel such as material inspection, fit-up inspection, roundness inspection, straightness inspection,
Witness hydro test, NDT final inspection and prepare manufacturing data report.
Supervise all welding and NDT activities as per contract requirement.
Review NDT result and recommend acceptance/ rejection of contract work.
Report to the respective area Construction manager for area assignment.
Material receiving, inspection of material equipment and approved equipment for installation on site.
Inspected and verified positioning of equipment prior to anchor bolt grouted.
Inspected and verified verticality, horizontality &
levelling of static and rotating equipment.
Inspected and verified preliminary alignment, pipe stress and final alignment of rotation equipment.
Welding inspection for fabrication of shell and water box condenser (Fit-up, visual and witnessed N.D.T
Inspection).
Signing inspection report of acceptance of all the above inspection results.
Monitoring contractor work activities to ensure all works are performed in accordance with the installation specification and procedure.

June 1996 to May 1998: Time Salam Lavalin Construction J.V.
Taman Megah, Petaling Jaya
Project: PUTRA-KLRT System 2 (for Kuala Lumpur)

Position: QC Inspector (Track Work, Civil & Welding)
Scope of work: 1) Checking concrete work as per Stated below:
- Slump Test
- Pressure Test
- Dial Gauge Test
- Sieve Analysis & Moisture Analysis
- Checking & Supervising casting Concrete Operation
- Checking as built thickness of panel according to drawing and cut sheet
- Filing report and submit to QC Manager.

2)Track works as per stated below:
- Study drawing, specification and procedure of works.
- To observe and witness with format sheet for operation progress as per stated below:
- assembly and placement of turn out
- assembly and installation special track work
(cross over) tie placement and spacing rail installation flash butt welding
- thermit welding bonded joints distressing operation linear induction module installation
- power rail study and power rail installation
- cable trench installation - fine tuning track
- filing report and submit to QC Manager

3)Cut & Cover Work (tunnel section) as per stated below: - Inspection of Bored Pile:
- with 600 mm, 800 mm & 1200 mm of diameter.
- Checking reinforcement before installation
- Checking concrete before pouring.
- Inspection of Starter Bars:
- measured and make sure length of the starter bars as in order refer to the drawing.
- Checking the reinforcement for base slab before concreting
- Dealing with sub contractor & consultant.
- Reporting to QC Manager & Consultant.

December 1994 to May 1996: Teknispek Sdn Bhd
Damansara Height Kuala Lumpur
Position: NDT Technician
ASNT Level 2-MPI & DPI
ASNT Level 1-UT
ASNT Level 1-RT
Assistant General Inspector

Project: Esso Production Malaysia Inc (EPMI)

Offshore: Jerneh-A
Semangkuk-A&B
Guntung-A&D
Tapis-A,B,C&D
Seligi-A
Bekok-A
Tioman Drilling (T-2)

Onshore: Sludgecatcher Terminal (OSC) Kerteh.
: Terengganu Crude Oil Terminal (TCOT), Kerteh.
: Tepat Teknik,Kemaman Supply Base(KSB),Kemaman.
: Petronas Penapisan Terengganu (PPT), Kerteh.
: Promet-Petronas Terengganu,Teluk Ramunia,Johor.
: Sarawak Shell Berhad(SSB),Pasir Gudang,Johor.
: Antara Steel Sdn.Bhd., Pasir Gudang, Johor.

Scope of work: To carry out Magnetic Partical Inspection and Dye
Penetrant
: Inspection and Radiography Testing on various type of weld configuration and other material.
: Thickness measurement of material.
: Job including reporting and documentation as per client requirement.
: Shutdown job.

Nov 1993-Nov 1994: Sime Sembcorp Engineering Sdn.Bhd
Pasir Gudang,Johor

Position: NDT Technician
ASNT Level 2

Project: EPMI Jerneh 'A'
- Compression Module 2
- Compression Module 3
- Compression Module 4
- Compression Module 5

: EPMI Guntong 'D'
- Production Module 1
- Production Module 2
- Production Module 3
- Production Module 4

Scope of Work: Performed MPI on various type of beam plate and pipe with various diameter.
: Performed MPI and DPI on piping with various material type

Project: Sarawak Sheel Berhad (SSB)
- M 1 Living Quarters
- M 3 Living Quarters

Scope of Work: Performed MPI on M 1 and M 3 plate girder fabrication.

Project: Sarawak Shell Berhad (SSB)
Integrated Production Module-M3PQ-A

Scope of Work: Performed MPI on M3PQ-A Structure.

Project: Tenaga Nasional Berhad (TNB)
Diverter Valve and Guillotine for Pasir Gudang Power
Station and Paka Power Station.

July 1992-Nov 1993: Malaysian Shipyard and Engineering Sdn. Bhd.
Pasir Gudang,Johor.

Position: Machinery Fitter

Scope of Work: Performed – Overall Ship Maintenance.
: Repairing for diesel main engine and accessories.
: Repairing for diesel generator engine and accessories.
: Repairing and alignment for shafting and propeller.
: Repairing and alignment for turbo charger turbine engine.
: Repairing for anchor winch.
: Repairing for marine gearbox and marine clutch.
: Repairing and alignment for electrical pump and centrifugal pump.
: Repairing for hydraulic and pneumatic system.
: Repairing many type of valve.
: Repairing for bow trustier at marine container ship.
: Sea-trial.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6101 to 6150 of 15477)

Go to Search Parameters...

Brief Description

Civil engineer

Fluent in French, Arabic and meduim in english

I have 8 years experience in process piping design in hydrocarbon service, including layout and production piping.

Architectural draughtsman, my experance is 8 yeairs completed and hands-on training with Architectural, Mechanical, Civil and Structural DraftingƒnExperienced with AutoCAD 2004 - 2009,Proficient with Windows: MS Word, MS Excel, MS Works, MS Outlook, MSƒnPowerPoint,

I am proficient in installation, troubleshooting and repair of electrical eqiupment.I can read prints and wiring diagrams. I am skilled in the use of electrical test equipment and electrical tools of the trade. I have WY, and MT master electrical license.

Experienced Mech. CAD designer utilizing ProE, Solidworks,Autocad and assoc. PDM packages to work on electromechanical projects for companies in the medical, power generation, textile manufacturing, communication, consumer product, industrial and aerospace industries.

Experienced Plant Manager: Was born into the Aggregate Business and have worked for more than 20 years in a large variety of positions within the aggregate industry with a record of successful cost reduction and increased production in operations.

Ten (10) years of accumulated experience in construction engineering, project planning using Primavera P3 ver. 3.1 for more than six (6) years, and project management. Last seven (9) years with Saudi Arabian Oil Company (Saudi Aramco), Saudi Electricity Co. - Eastern Region Branch (SEC-ERB) and Saud

Sixteen years experience in inspection such as Piping and Structure Inspector, Pipeline Inspector, Civil & Track Work Inspector, NDT Technician Operator, Machinery Fitter for petrochemical projects, power plant, oil and gas projects, LRT-PUTRA project

Internationally experienced and trained professional in Instrumentation and Control Systems. Experienced in the design, control philosophy, MMI/HMI generation, implementation, start-up, commissioning, and operation of DCS, SCADA, and PLC.

chemical engineer

Technically accomplished & competent professional with over 9+ years’ rich experience on Refinery Inspection department Activities, starting from Refinery construction stage to pre-commissioning and Normal operation. Currently working as Assistant Manager (Inspection) with NRL

Tender Preparation & Evaluation, Raising RFP’s, Preparing prequalification document including involvement in preparation of execution strategy, Defining scope of work, preparation of Commercial clarification, Raising commercial deviations etc. Project Monitoring: Continuous monitoring of Projects

Having total 11 years experience out of which 10 years in Oil & Gas and Shipbuilding Industry as an Cost Estimator, Cost Control Engineer, Tender Coordinator and HSEQA Adviser in the leading FPSO/FSO Company, Shipbuilding/ship repair and conversion yard.

I am a Slickline Operator with over 20 years of experience in Wireline/Slickline Operations. I am an holder of a diploma in Mechanical Engineering.

A Senior Project Engineer with a wide range of experience in Construction and Maintenance. Able to work on own initiative and as a part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve the planned objectives.

20+ years in drilling and completions including under balanced side trac re-entry and frac-pack sand control operations. Have worked off-shore Greece, desert locations Libya, Algeria, Saudi, and Russia

25 years Experience Materials & Logistics, Base Manager, UK, West Africa, Middle East

Phd in Geology, presently working as a hydrogeologist in central groundwater dept. india for the last 8 years

Chemical Engineer. Main experience as chemical treatment and corrosion engineer in Oil&Gas facilities (gas, steam and water injection plants, tank farms). Engineering and field experience. Oilfield chemicals selection and testing. Process optimization. Control and Instrumentation experience.

Wellsite geologist, wireline corelation, mapping, pressure detection, hands on well control advisor, well design, rheology and hydraulics solutions.

Mechanical fitter, heavy engineering, worked all over africa, currently in mali, knowledge of hydraulics and pneumatics, work on winders mills etc laser alignment

Sound understanding/ implementing of HSE Management System.

Presently working offshore China coast for the last 11 years. We have drilled & completed over 48 wells. Side tracked over half. We have drilled 8 ERD wells the furtherest is 9238m (with a horizontal displacement of 8063m June 1997) This is China record for "Deepest Measured Depth".

Contracts, Services Manager, Wellhead Maintenace, Integrity Engineer, Senior Well Engineer

Phisicyst with Power Electronics specialization

I have been a cementing supervisor for Haliburton and Schlumgerger for over 20 years, I have worked mostly offshore, hpht, deep water, I have some land expierence, I am currently working in Yemen, I have a very good knowledge of all facets of cementing, tools, chemicals and equipment etc

B.E. Mechanical Engineer, Middle Management Maintenance Executive. Demonstrated willingness and ability to quickly acquire new expertise, solving problems related with Rotating Equipment reliability and performance. Looking for challenging opportunity and career advancement.

Senior Piping Designer CADD

Mechanical / Piping Engineer

Diploma civil engineer from Mumbai(1st class with distinction)have 23 years of actual field experience of executing various types of civil works in & around Mumbai & pune.I hereby attach my C.V.along with this letter for your consideration & evalution.

Im graduated of bachelor of science in civil engineering, I have 14 years experience in Drafting/Design for structural steel, FPSO pressure vessel and piping layout thru P&ID. I have background in qaulity inspection for dimensional and visual, also Im NDT-LEVEL II Inspector (DPT).

Instrumentation Engineer With 10 Years Experience In Managing Engineering,Re-vamping,Installation, Commissioning And Maintenance Of HONEYWELL DCS/SCADA Systems

Years of exp. in the Western U.S. and South America. Exploration trough production with the big five surface and underground operations. Understands South America.

Project Control Manager/ Lead Planning Engineer - Oil & Gas.

QA/QC/NDT inspector, trainer, or manager - structural steel, power piping, transmission pipelines and nuclear - AWS D1.1 QC-1 CWI, and level II in RT, UT, MT and PT per SNT-TC-1A - Computer literate -

With 20 years experience in fire, rescue and emergency response, I hold instructor qualification in the areas of high angle, aviation, confined space, trench rescue and well as fire fighting. I am at present completing a post graduate diploma in WH&S run by CQ Uni, Australia.

I worked in automation and process consulting companies for six years.

* Chemical Engineer with 14 years experience in Process, Production, Commissioning, Technical Support & Service, Product Development, Quality Control, Project Management, SHE (Safety, Health & Environment), Logistics, Sales & Marketing and Production Planning area.

A confident organised individual who is methodical in his approach to completing tasks, Can either work as a self – reliant individual or as part of a team.

Mine/Mill Maintenance Supervisor OBJECTIVE: A position in the mining industry, where ever I can be useful as a Mine/Mill production / process manager, Supervisor, Maintenance Technician

Industrial Engineer with experience as maintenance instrument technician and plant engineer in process plants. Higher Knowledge in Instrumentation and Control, such as transmitters, field sensors, analyzers, solid handling instrumentation, control valves, special application devices

I have spent 23 years in the extractive and minerals processing industries.

API-510, API-570, API-653, AWS-CWI 25years international experience QA/QC Supervisor ,Superintendent, Coordinator

University degree in Logistic's & Economics, 13 years hands on Middle East experience in all Procurement matters of small to huge EPC (design & built) Construction projects in public, defense & petrochemical works in both managerial & operational positions.

Crane operator/ outside machinist

My areas of expertise includes commissioning, start up, shutdown and operation of gas plant, refinery and oil production units.

I am Mechanical Engineer having 14 years of working experience in Maintenance of Petrochemical and Fertilizers Plants. Good knowledge of SAP, MS OFFICE.

I am an Electrical Engineer from Colorado School of Mines. I have worked for two major oil companies. I have worked on several areas of energy industry as an Electrical Engineer.

Supervisor - SAFE Underground Mining/Training - Production/Development and Construction. Atlas-Copco, Boart-Longyear, Wagner, Caterpillar, etc. 20+ years in Underground Gold, Silver, Lead and Zinc.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 [ 123 ] 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out