Resume - Multi-disciple project engineer covering, electrical, instrument, mechanical, pi...

Misco Jobs

Resume #53217

CONTACT INFORMATION:
View contact information...

Nationality: American

Preferred Status: Single status

Qualifications: HND, High Voltage: Power / Electronics

Work Experience: Refineries, Oil field work & Gas Plants. NGL/LNG/LPG. Cryogenic tank works.
Offshore/Onshore module & Jacket work. FPSO and Hook-up work. Oil &Gas Terminals Power Stations. Combined Cycle Power Plant, Nuclear, Gas, Oil and Coal fired..
Water Treatment & Desalination Plants. Polythene, Ethylene plants.
Aluminium Smelters & Bauxite refining plants for the aluminium industry.

Personal Profile: An experienced commissioning and construction engineer with over 30 years experience in the Oil, Gas and Power industries which has included Project Management and Client representation associated with multi-dollar EPC and EPIC projects world-wide.

A skilled communicator, in both written and oral forms, able to develop and lead multi-national work teams. Able to work in difficult locations and maintain work schedules with minimum support from head office. Dedicated to safe and environmentally compliant HSE work practices and procedures. Covering multi-disciplined work fronts associated with major building works, Oil & Gas facilities / terminals and high voltage work on all types of power stations and power transmission systems. QA/QC Certification records work also covered.

2005 Dec – Sept 2006 Chevron/Texico Bonzala Project _Angola/Louisiana USA

Senior commissioning engineer overseeing the EPIC contractor Dynamic Ind during the fitting out and commissioning period.

2004 Oct - Nov 2005 Exxon / Mobil"YOHO" Project Malaysia

Senior commissioning engineer overseeing the EPIC contractor SIME. SEMBCORP Engineering during the fitting out and commissioning period of the generation / process and associated accommodation platforms for the Nigerian YOHO project at the Johor Bahru shipyard Malaysia. Additional work on FPSO offshore vessels in Nigeria also.

2002 September – Dec 2003 Shell CCAGG Project Nigeria / Louisiana USA.

Returned to Shell Nigeria to initially co-ordinate the compilation of O&M manuals and contract documentation for the above project before transferring to Louisiana USA. Evaluation and review of the Korean EPC contractor's general services plus claims associated with this project. Co-ordination of commissioning, QA/QC certification records on the Power & Process Barges for the (CCGG) Cawthorne Channel Associated Gas Gathering Project. Additional work covered sub-contract support, witnessing factory acceptance tests, training nationals etc. Witnessing HV & LV energising of E&I switch-gear, Pressure testing of vessels, rotating equipment etc. On completion of the initial contract commissioning, QA/QC work in Louisiana, returned to Nigeria to assist with the contracts offshore hook-up work of the barges and incoming pipelines from the associated LNG Bonny Island offshore facility. Projects value $US 400 + million.

2002 April- Aug 2002 Enelpower for Dubai Electricity & Water Authority.

Seconded to Enelpower as senior electrical co-ordination / contracts engineer to oversee and assist major work on a new 1000M/watt CCPP Power Station / Desalination plant for Dubai Electricity and Water Authority, Dubai, UAE. Support of the sub-contractors during the initial contract, pre-com and commissioning activity period. Initial review of contract schedule and monitoring of contract performance against the planned man-hour estimate. Recording of restraints plus certification of completed services also undertaken. Management meetings covered the activities of the main sub-contractors and essential safety requirements associated with this project on a daily basis. The main 400,000 / 132,000 volt Gas insulated switch-gear systems and Gas turbines were supplied by Siemens Power Div Germany & Hyundai. Main transformers by Fuji Japan. Initial contract value $8 billion.

Jan 2001 – Feb 2002 Shell AGG Project Port Harcourt Nigeria.

Seconded to Shell. Overseeing the initial contract documentation associated with the construction / commissioning work/start-up and operation of live plant in line with the Shell DEP requirements on associated gas gathering and non-associated gas gathering plants. Review of contract documentation and contract schedule covered at regular management meetings between Shell and the EPC contractor. Overseeing certification and Pre com / commissioning procedures prior to plant start-up. Monitoring and recording contract delays and possible contentious claims by the EPC contractor relating to design changes etc during the contract period.

July 1997 – June 2000 Tengiz, Kazakhstan. C.I.S. Asia.

Responsible for the co-ordination of major project sub-contract work on de-bottlenecking four trains of crude oil stabilization plant from 6 million to 8.5 million tones per year.
Direction of EPC contractor, Bechtel-Enka Joint venture overseeing planning, cost control, training national work teams and construction activities to ensure that all aspects of the project was completed on time and within the contract budget. Weekly management meetings to review of expended man/hours against the contract schedule plus recording of restraints also covered on a daily basis. Contract assistance to encourage the EPC contractor to avoid obvious delays and the proposal of alternative work fronts achieving earlier completion dates, also part of management team overview.

Major alterations to the existing high voltage power generation network, included the integration of a new 35/10kv sub station and control room. The installation and commissioning of new transformers / reactors, new HV and LV switch-gear plus a new 35,000 volt underground transmission cable service between the main Gas Turbine Station and Central Power Station transformers. Complete rebuild of the existing 12 No Russian built gas turbine control systems to support the new power management system from central control. All conversion work was achieved without loss of power to the main gas and oil processing facility. A further two additional 35 Mw frame 6 machines were also installed to give additional power for future refinery developments.

On completion I transferred to the oilfield development facility to assist Operations with QA/QC certification and to co-ordinate the installation of new well sites, cathodic protection installations, metering stations and central plant manifolds controlled via a new SCADA transmission system. The debottlenecking project was a fast track $290,000,000 project with many commercial / contract interface problems, which required day by day monitoring of the workforce culture and was successfully completed on time.

March 1996- June 1997 K. Home Eng. Consultants. Dubai UAE.

Worked on a consultancy basis overseeing the contract management of high voltage / control work associated with a new smelter extension for DUBAL at their existing Dubai Aluminium plant UAE. Attendance of management meetings to overview cost control and planning, also review of possible contract restraints and deliverables, support and advice to sub-contractors relevant to work fronts, delays etc, essential safety requirements and interface requirements with other sub-contractors and vendor services.
The installation of new plant covered: two new frame 9 120Mw capacity GEC Alsthom Atlantique Gas Turbines. A 132,000 volt rectification system for the 200,000 Amp Bus-Bar Anode installations to feed the Potroom smelter section. Overhead conveyor system. PLC control systems, a new carbon anode manufacturing system including two new anode kiln batteries and casting plant. HV and LV switch-gear installation including commissioning. A new air handling system by ABB Ltd to control gas emissions from the new anode kilns. Security camera and fire alarm installations. Water treatment & desalination plant work also covered. Permit to work responsibilities covered the authorization and acceptance of permits associated with the HV& LV power distribution, rotating equipment and confined space entry in liaison with the live plant permit control dept. Inspection / testing and witnessing of vendor equipment and materials prior to site acceptance. Planning & safety involvement plus the compilation of all QA/QC certification also part of job scope.

Nov 1994 – Feb 1996 M.W.Kelloggs Major Projects. Abu Dhabi UAE.

Contracts engineer responsible for the E & I installation works and integration of new pneumatic / electronic instrumentation with the existing Foxboro control systems on the Ruwais refractionation LNG gas storage facility. Implementation of contract procedures and certification for the sub contractor plus permit control and method statements / work packs and planning control for the shut-down tie-in to the LNG requirement was a major part of management responsibility on this project. (Specification as per Shell D.E.P). On completion of construction works and integration of new systems with the existing gas trains, assistance with commissioning and plant start-up team plus training / maintenance duties then followed.

July 1994 – Sept 1994 Mott Ewbank Preece Consultants. Abu Dhabi UAE.

Returned to the power station integration project on Das Island for ADGAS & ADMA-OPCO to complete the remaining instrument / electrical / turbine commissioning work prior to final close out of contract documentation, claims and certification for client acceptance. Training of overseas national's also undertaken through-out contract period. Honeywell 3000 DCS Control system used for the integration of both power stations. Existing Frame 5 Asthom Atlantique 18Mw gas turbines by John Browns supplied the main power.

Sept 1993 – June 1994 Awazi Gargash / Aughton. Dubai UAE.

Worked on a consultancy basis overseeing new contract work and promoting sales associated with the Petro-chem, Gas, Oil, Water Treatment and Electricity companies and major building works such as hotels, accommodation blocks and plaza complexes throughout the Emirates. Major companies associated with being: DUGAS, Emirates Oil, ADMA-OPCO, ADGAS, GASCO, Baker Oil, Brown & Root, Chiyoda, Al Khaleej Sugar, John Brown Turbines, Rolls Wood Turbines, Wimpey UAE, Deutsche Babcock, Foster Wheelers, Six Construct, Abu Dhabi Water and Electricity, Bechtel, Kelloggs.

Nov 1992 – Sept 1993 Mott Ewbank Preece Consultants. Abu Dhabi UAE.

Assigned to the power station integration project on Das Island to initially develop and oversee the initial cost and planning logic between the ADGAS & ADMA-OPCO power stations during the construction phase of this live plant project. Later into the project duties covered overseeing cost control and the monitoring of the sub-contractor, Cegelec during the installation and commissioning phase of the power / protection systems associated with the Honeywell DCS work. This system ultimately monitored the control of 4 No Frame 5 Althom Atlantique 18 Mw turbines. PTW activities also covered the weekly look-a-head and submission of written permit requirements for excavation works; all associated live plant activities, entry into live sub-stations and de-energization of switch-gear to carry out modification works etc.

Nov 1991 – Oct 1992 Consolidated Contractors Co. Greece/USA/Far East.

Originally assigned to oversee the High voltage / Gas turbine project work associated with new (CPU) Central Process Units, Gas powered power stations and marine terminal facilities. Duties at home office Athens covered the evaluation of base bid tenders, planning & cost control plus the recommendation of contractors for future project work associated with: Airport security systems, new townships, gas plants, CCPP and coal powered power stations, waste water & water treatment plants, pipe lines, steel plants and the rebuild of Oil facilities for KNPC Kuwait.

May 1990 – Oct 1991 Egyptian National Petroleum Industries. Egypt.

This work entailed representing the owners, BP, AGIP/ Snamprogetti and Marathon oil to monitor the planning/liaison phase, QC/QS certification and commissioning phase of the Abu Madi LNG gas Project. Other E&I / Piping work associated with pumping stations, waste water & water treatment plants, wellheads, pipe lines and irrigation systems in the lower Nile and Sinai locations also covered.

Nov 1988 – April 1990 Lummus International. Nigeria.

This work involved the development of proposals / contracts /cost / planning and QA/QC work associated with various forthcoming gas projects in West Africa and the Middle East locations. Supervision of the E & I contract works on the Wari project Nigeria also covered.

Aug 1986 – Oct 1988 Imperial Chemicals Engineering Group (ICI). UK.

This position involved overseeing a number of projects associated with ICI plastics/ power group initially covering the contract management and cost control of various sub contract disciplines for fast track development work at their ICI Darwen, Huddersfield and Fleetwood facilities. Multi disciplined supervisory work covered HV and LV E&I installations, Civils, Piping, Steel structures, Vessel installations, Coal fired power station / boiler work at Fleetwood, Water treatment, Dis-investment of redundant process plant, Site clearance, Piling and Drilling etc. QA-QC Inspection and certification work to BS 5750 & ISO9000 plus safety meetings on a daily basis also part of overall job involvement with all contractors. PTW activities required all contractors to report direct to me to obtain permits for activities in all the above live plant areas. Issuing of permits was in accordance with ICI regulations and dependant on live plant conditions 24 hours a day.

Nov 1985 – July 1986 Matthew Hall Engineering.

Responsible for electrical / instrument construction work associated with the control, high and medium voltage systems at the Heysham 2 nuclear power station. This work also covered the seismic qualified cable rack and steelwork installation through-out the reactor and turbine areas. Planning and design work covered the make up of packages, drawings and schedules for the various sub contract material and take off requirements. Liaison with the Central Electricity Generating Board (CEGB) regarding design changes, back drafting and computer updates covered on a weekly basis. Later, transferred to the Trident project at Barrow shipyard to assist with the design, planning and supervision of security control systems, high and medium voltage construction work, installation of Power Systems and fitting out of the submarine construction halls. All design work was to British and American standards.

April 1983 – Oct 1985 Lummus Inc,

Process electrical / instrument superintendent overseeing construction / planning, QA/QC/Certification plus vendor inspection work for the new plant area of this ethylene process plant. Selection and recruitment of supervisory personnel. Monitoring progress and advising all personnel on safety measures to be adhered to. Overseeing control and final commissioning work associated with the Honeywell 2000 DCS control system. Major sections of vendor packages such as gas turbine compressors and cryogenic tanks monitored and supervised with select construction teams.

June 1980 – March 1983 Alumina Contractors

Sub contracts engineer involved with the management / co-ordination of the EPC E&I contractor during the design, inspection, construction, commissioning and handover phase of this major project. Associated works covered the main 22.000 volt and 380 volt power systems, all jetty installation work including ship loaders and unloader construction, cathodic protection on the jetties, DCS systems, Bauxite storage facilities with all overhead conveyor systems, laboratories, workshops and main offices. Vendor packages such as Foster Wheeler boilers, Water treatment plant, Interrogation / camera security and Fire Alarm systems monitored as separate contracts. Planning and cost control monitored with the aid of Artemis computer software. PTW activities covered the issuing and control of permits for all contractors during the construction and commissioning phase of this project. The main activities covered excavation works for high voltage cabling, associated terminal and jetty works covering piling, underwater Cathodic Protection installations, and erection of ship loaders and loading arms etc.

Nov 1978 – March 1980 British Steel Chemicals Ltd

Initially in charge of contracts up-rating and re-organizing the main power distribution system at the BS Port Clarence works Teesside. This work then developed into a general multi disciplined sub-contracts position overseeing all construction activities for British Steel on coal fired power stations and various steel producing and chemical projects through-out the UK. Supervision of various contracts including cost control covered: management of E&I work, Piping, Tank work, Insulation of tanks, steam boilers, Rod and Rail making mills, various types of Furnaces and Water treatment plants.

Sept 1975 – Nov 1978 Brown & Root INT

This position covered the supervision and inspection of all E&I work associated with offshore generation and accommodation modules for the Forties Field project. Equipment installed covered Ruston Gas Turbines, (now European Gas turbines) 11,000 volt GEC switch-gear, 11,000 /415 volt transformers, motor control panels plus all power and control cabling.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6651 to 6700 of 15508)

Go to Search Parameters...

Brief Description

BE MECHANICAL ENGINEERING,ME THERMAL ENGINEERING.

9 years Experience in Oil and Gas offshore production process platforms as Production operator, Plant Operator. Worked in IRAN Petropars Gas development Project phase 6,7&8 as Field Operator through the employer DAELIM Ind. Co. South Korea, Well experience in Commissioning and Plant start-up also.

i am a qualified mine surveyor and a civil engineer currently with Anglo platinum.

I am electrical engineer and doing job in CCIC qatargas project since 2 years.i am looking for the new job in oil and gas industry

Recycle Hydrogen System,Recycle Gas Scrubbing,H2S Handling ,Amine Treating,Reactor Effluent Water Wash,Vapor/ Liquid Separation,Hydrogen Purification,Stripper,Off Gas Absorber ,NHT,PLATFORMING,CCR

To work in a motivating and demanding position, which will help me to grow in the field of knowledge, improvise skills and add value to the system and grow along with the organization.

proficient in AUTOCAD, MS Project, MS Office package, SAP & primevera.

Highly motivated mining engineer graduate, with internship experience at Kompania Weglowa, largest coal producer in Europe. Interested in working as open pit and underground mining engineer, developing technical knowledge skills in adult and pursuing a career in mining industry.

Preparation of Data book files to conform to clients procedures and guidelines, Organize information from internal sources including client, suppliers and in kind resources, Generating and maintaining the project master punch list.

Offshore Drilling Maintenance Engineer

Good work ethic, current job title is foreman. Can read prints, run/route tray, terminate, build panels, troubleshoot, some experience bending tubing etc. Knowledgeable in power, automation, & pneumatics along with a good understanding of both drilling and production operations.

3 years Diploma (mechanical engineer) &12 years work exp- oil & gas area for mechanical supervisor.

PIPING ENGINEER

Perform canister gas content analysis and residual gas experiment on selected core sample, data acquisition and data entry to determine lost gas value.

Well service specialist

A full time position to appreciate and explore a challenging environment in the field of Environment and Safety that offers Professional growth & advancement opportunity while being resourceful, innovative and flexible

Process Engineering

Have all Oilfeild tickets

Seasonal Professional with nearly 9.3 years of experience in Construction, Erection & Project Management and Team Management with well known organizations. Demonstrative abilities in identifying potential, deconstructing complex situations and further conceiving and implementing streamlined solutio

Document Controller

Experienced gained in drilling engineering, heavy work-over operations, HPHT wells, deep water operations, well completion and testing, tendering, cost/contractor control, qa/qc, project management and conflict resolution. Holds a diploma in Mechanical engineering and final y B.TECH in petroleum

Fresher- engineer in maintenance and exploitation of oil and gas deposits.

Programming of Emerson DCS (Ovation),

MBA-Finance and done summer training in standard charted bank

Sales and marketing professional with a proven track record of achievement in leading and managing a seasoned, high performing, global sales team.

Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.

Results oriented electronics technician. Background includes twelve years of experience in troubleshooting, assembling, installation, testing, upgrading, configuration, support, and maintenance of Audio, Video, Communication devices, Cellular phones, computer hardware and software.

A capable, enthusiastic civil engineer with 12 years experience on site construction specialize in horizontal and vertical construction, tunneling, viaduct, high speed railways, High rise buildings

Diploma of Associate Engineer in Civil Technology

All type of Light & Heavy Lifting & Transportaion job

diamond driller

Im a Mechanical engineering graduate. i have completed my undergraduation (B.E.) in india under Anna university and did my masters (MSc in Mechanical engineering) in UK at Staffordshire university. After that i came to india and joined as production manager in Sri venkateswara textiles.

Relatively young well test engineer/testing supervisor with 10 years hands-on experience in well testing. ex-service hands with direct knowledge of how things worked and troubleshooting. Good interpersonal skill and work hard.

Mining engineer with 4+ years experience.

Biomedical Engineer having skills to sortout the problems of electronics & mechanical. also able to work in the pressure.

I am a chinese,39 years old.I graduated from DALIAN MARITIME UNIVERSITY.I have 5 years experience on Oil Tanker as Junior Deck Officer and 10years on FPSO as DPO & Cargo Operator.I hold Chief Officer Certificate.

I have a proven ability to organize and lead members of a team, ability to bring fresh perspectives to a business and technical team, excellent verbal and written communication skills. I catch on quick. I am a multi tasker, and great under pressure. I believe in team work and will work as a team pla

Piping engineer

Total 4.2 years relevant work experience in the field of Piping Stress Analysis. • Diploma in Piping Engineering from Suvidya Institute of Technology. • B.E. in Production Engineering with First Class. • Diploma in Production Engineering with First Class.

I am a site manager currently financing myself through a BSc in construction management with the Reading University, having already completed various construction related college courses. I have been working in the U.A.E for the past 2.5 years managing a large workforce on mix use developments.

I have BSC in electrical engineering and now I am working in ethiopian electric power corporetion since june 16 - 2005 under protection and communication enginering

PROFILE: Filipino CPA and MBA with 15 years of experience in the fields of audit, finance and accounting

Experienced Landman/ROW Agent

Design, detailing, offer evaluation, TQs preparation, vendor drawing approval of the various static equipments like Pressure Vessels, Heat Exchangers, Columns, Reactors.

I finished in diploma in Architecture, master diploma in architecture cadd

Challenging and rewarding position in growth-oriented organization which offers diverse job responsibilities in vehicle maintenance and will fully utilize both my technical and managerial abilities.

Detail Engineering: P& ID review and Basic selection of Instruments from process description, Control Philosophy in co-ordination with Process Department, Engineering of distributed control system, Specifications for field instruments, Panel Instruments and control system.

Excellent negotiation skill,strong analytical skill,excellent client orientation skill.B.sc degree in banking and finance

I have over 12 years of experience in sales in the oil and gas industry. I have multiple certifications as you will notice in my resume.

4 years experience in Quantity Surveying, also exposed in construction management works.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 [ 134 ] 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out