Resume - NDT inspector LVL II

Misco Jobs

Resume #53430

CONTACT INFORMATION:
View contact information...

NAME: JABBAR K. SHNAWA

RESIDENT OF: LIBYA – TRIPOLI

BIRTHDAY: 10th JUNE 1965

GENDER: MALE

MARITAL STATUS: SINGLE

PASSPORT No.: H 0314735

NATIONALITY: IRAQI

QUALIFICATION: Bsc. IN MECHANICAL ENGINEERING

PROFESSION: WELDING & NDT INSPECTION ENGINEER

LEVEL II ( RT –UT –MT-PT )

GRADUTION: UNVERSITY OF BAGHDAD – COLLEGE OF

ENGINEERING - MECHANICAL DEPARTMENT IN 1988.

OBJECTIVE:

I would like to work as QC ENGINEER with experience as WELDING & NDT inspection engineer and to work with SMAW, GMAW. SAW,GTAW, FCAW and PAW processing, LEVEL II in RT –UT – MT –PT and experience in Preparing and Evaluation of WPS, PQR and WPQ according to ASME, API, AWS and BSI, and making qualification and testing of welders according to ASME code or API standard. I have experience in inspection pipelines, vessels, steel structure and boilers and have good experience in working at oil and gas sectors and can prepare the inspection and qualification reports. evaluation of destructive testing reports for materials and materials corrosion with vast experience in interpretation of radiographic films and make inspection by using ULTRA SONIC test with shear wave and make MT by using fluorescent test and non – fluorescent test by YOKE or another processing., using DYE PENTRANT TEST to evaluate the surfaces defects of welding, and make calibration of UT and MT, and making PREHEAT and PWHT procedure for weldment. QA/QC Field Engineer, have inspection experience in piping including review of ITP/ WPS/ PQR/ WPQ/ MTR/ weld map etc, piping spools fitups inspection, material traceability records maintenances, joint nos. weld nos. records, piping spools isometric nos./ spool nos. identification, installation, review of RT films and other NDT reports, monitoring rejection rate and welders performance, review of PWHT reports and charts, punch listing, review of test packages for welding and NDT completion, issue release for hydro static test and witness of the same, review calibration records of pressure gauges, reinstatement of piping after hydro static test, monitor internal cleaning, fitting up of new gaskets, boltings and its tightness, review of final QC documents etc.

WORK EXPERIENCE:

Mega-Electra S.A.Lugano CH /SWISS

I was working with this QC engineer at AL ZAWYIA REFINERY to make repairing and maintenance for heavy oil tank such as floating roof and gates and pipelines after welding, checking all weldment by RT, UT, MT and DPT and make welders qualification, WPS, PQR.

SOCOMENIN COMPANY

TUNISIAN COMPANY

FROM 12/11/1997 TO 4 / 9 / 2001

(Engineering, industrial, construction & maintenance –AV MED KHEFCHA 3000 SFAX

– TUNIS

I was working as welding and NDT inspection engineer in DERNA POWER

STATION to make maintenance and repair boilers and made retubing for

Boilers and installation of demineralization plant (STAINLESS STEEL

GRADE 316 L ) with DEGREEMONT COMPANY and at TRIPOLI

POWER STATION, TUBRIK POWER STAION with

BABCOCK COMPANY and in RAS LANUF OIL AND GAS

PROCESSING COMPANY and choose all specifications of heavy oil fuel tank project ( 40-Q-32 ) and made the bill of material in accordance with international standards such as ASME, API, AWS, NACE 0175, BS

supervised all welding and inspection activities at these projects, and working as welding and NDT inspection engineer in AL BURI

OILFIELD ( ENI OIL COMPANY ).

MEDITERRANEA PROGETTI

SICES GROUP (LONATE C (VA) ITALY

From 25/7/2004 to 1/10/2005

TRIPOLI PHONE - 00218214836050 / LIBYA

(MELLITAH PLANT IN WESTERN LIBYA GAS PROJECT)

( ENI GAS ) (LPG PLANT )

ALSARIR OIL FIELD (ARABIAN GULF OIL COMPANY)

I was working with MEDITERRANEA PROGETTI COMPANY AS

Mechanical supervisor to execute the welding and inspection of NDT in

WESTERN LIBYA GAS PROJECT with SNAMPROGETTI ( ENI

GAS ) and installation pastillation unit and sulpher warehouse in Mellitah plant (LPG ). and working with desludging desalters project

(heating system ) in ALSARIR OIL FIELD (ARABIAN GULF OIL

COMPANY) for processing and desludging the crude oil from sludge.

and made site survey for low pressure project in ABOU TEFFEL FIELD

( ENI OIL COMPANY )

AL NAHR LIMITED COMPANY FOR pipe manufacturing and construction

15/10/2005 up to now

Iam working with engineering department to supervise all welding and inspection

Activities for water supply project (phase III) and qualification of welders and pipelines

Laying (DIA 4000 mm) and checking and evaluation of NDT inspection by using UT

Procedure. Evaluation of welders qualification

SKILLS:

MICROSOFT WORD, EXCEL, AUTOCAD 2007.

LANGUAGE:

ARABIC, ENGLISH AND SIMPLE ITALIAN

EDUCATION:

University of Baghdad
College of engineering
Mechanical department
1983 -1988

TARGET JOB:

EMPLOYEE

JOB STATUS: FULL TIME

JOB LOCATION: ANY

CATEGORY: WELDING AND NDT INSPECTION OF PETROCHEMICAL

PLANTS, OIL FIELD SERVICES, WATER SUPPLY SYSTEMS and VESSELS.

ORGANIZATIONS:

AMERICA SOCIETY FOR NON-DESTRUCTIVE TESTING (ASNT)

AMERICAN WELDING SOCIETY (AWS)

IRAQ UNION ENGINEERS.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 15508)

Go to Search Parameters...

Brief Description

QA/QC ENGINEER

An experience individual with excellent knowledge of Sales/Marketing, Freight handling, Imports/ Exports Management with the objective of achieving organizational goals and making it a strong profit center seeks an opportunity in managerial capacity

I offer a broad range of upstream petroleum business skills and leadership experience covering exploration/development planning and LNG project execution, subsurface and production facilities planning, economic analysis, strategic planning, commercial/legal negotiations and corporate communications.

Five tears of experience in the field of industrial environmental monitoring specially related to petroleum and petrochemical complexes.I have sound knowledge of US EPA regulation. I can also design air air polltion control systems.

Senior Project Manager, International Industrial Multi-Disciplinary &Muli-Cultural Projects

I am having vast experience (22 Years) in Maintenance & Projects and in diverse fields. I am suitably qualified (BE, ME, PGDM, PGDIT) to take up any challenging assignments across the globe.

Negotiations, planning, economics in international joint venture gas and midstream projects for past 14+ years. Started career as reservoir engineer with Exxon.

Trade and degree qualified welding engineer and m,etallurgist with 25+ years experience in petrochem, power, onshore rig contruction and computerised welding documentation management.

M.Sc Applied Geology. M.Tech Min Expln,PG Dip In Envt Mgmt & PGDip In Env Scs, 22 years of experience in govt industry. opte vrs ,desg Manager (Environment)

Electrical engineer - building electrical design and rapid transit systems; proposals and specifications; CAD.

Analytical chemist in the fields of oil & gas, petrochemical, fertilizers, pesticides and pharmaceuticals.

Senior mechanical engineer with experience in engineering for material handling, industrial installations and conveying machines in steel industry, mining, cement & chemicals. Start-up assistance for steel industry.

Technical / Lead Safety Engineer

NDT inspector LVL II

reclamation and quarry

11 years experience in offshore construction, field engineering, planning, offshore and onshore project scheduling, field supervision for installation of offshore platforms pipelines spools, pigging and hydrotesting. Preparation of installation procedures, rigging calculations, material procurement

With 12 years in the Oil Field Industry, working in Brasil as well as other countries such as, Colombia, and USA. I became proficient and experienced in Completions, such as Sand Control (Gravel Pack, Frac Pack, High Water Pack, Horizontal Gravel Pack) Upper Completion (single/dual string), Expandab

Network and security Engineer

HR Officer, Recruitment and Administration, Hiring Officer, Hiring Consultant, Marketing

Close supervision of projects handle and monitoring

Degree in Petroleum and Natural Gas Engineering. New Mexico Institute of Mining & Technology (NMT), Socorro NM.

I have masters in Water Resources Management followed by Bachelor of Engineering. Skills in Construction management,people management,sub conatractor mangment,quality control,health and safety

Extensive field application and R&D experience in hard rock drilling rigs, rock tools, DTH hammer, strong trouble shooting skills of hydraulics

I have basic education, knowledge and experience as for Project Metallurgist

Core business is scaffolding; Consulting, controlling, supports, execution business. in Oil & Gas industry and construction industry

Nearly 15 Years QA/QC composite Experince in Electrical Manufacturing as well as Construction of Oil & Gas Central Processing Platform

A result oriented and self-motivated M.Tech Civil Engineering Professional with over 18 years of rich & qualitative experience in Project Management, Civil Engineering and Construction Management of infrastructure projects including Airport Terminals, Buildings Roads and Flyovers.

ASQ Certified Quality Technician with over 8 years Experience in the development and implementation of Quality plans and manufacturing procedures used in the Petroleum and natural industries for Rotary drilling equipments. Regulatory compliance, QA/QC, NDE, Material testing and Inspection

Human resources

A highly motivated professional with 10+ years of diverse hands-on experience in conceptual process design, technical services and developing/upgrading of upstream oil processing facilities. Worked on petrochemical projects, oil sands technologies and water/wastewater treatment plants from front end

Piping Designer with 12+ years of experience in piping design & detail engineering involving Equipment layouts, Piping layouts, Piping isometrics, Tie-in Schedule and Pipe supports for Onshore & Offshore Oil & Gas, Power and Petrochemical Plants. Have good knowledge of all national & international c

A senior logistics specialist - currently pursuing MBA - with 9+ years of track record in administration, logistics, contract and fleet management with cross competencies in MIS report analysis. Seeking a challenging position with a dynamic organization to apply accrued expertise in achieving tangib

Seeking a career change to obtain a challenging Project/Process Engineer position in a Water Management company.

Seeking suitable opportunities in the field of CP including offshore and onshore -industries, oil companies, contracting companies and power sectors, to harness my technical skills & acquired knowledge- to it's best, so as to bring out the best in me and thus to attain the highest degree of progress

Current Position as Air Separation Unit Technical and Process Specialist for Petronas Gas Berhad with previous experience with Air Products Chemical Incorporated and Messer Griesham. Some college from Texas Tech University, Lubbock, Texas USA.

Engineer Graduate with 09 years experience in Automotive Field as Sales ,Warranty, Technical Engineer

Process Engineer Resume Oil and gas

Over 25 years in the construction industry

Heavy Equipment Mechanic Journeyman including Redseal certification. Ten years experience on machines and equipment such as coaches, trucks, trailers, lifts, and others. Also knowledgeable in areas such as A/C, Electrical, Hydraulics, and Air Systems.

Experienced (+29 years) professional geologist with field and laboratory background and prospecting/exploration for gold, PGE and base metals.

Piping Field Engineer – Technical Office

I have generated prospects in several basins. I am a proven oil finder and a team player.

HEALTH, SAFETY & ENVIRONMENT SPECIALIST WITH 20+ YEARS OF EXPERIENCE

mine management, mining engineering opencast & u/g, planing & designing the mine , liaisoning

14 years experience in welding technology ,Have extensive experience in welding(SMAW ,GMAW,FCAW ,SAW,TIG etc) of CS ,Alloy Steel ,C-Mn steel , and SS , DUPLEX STAINLESS STEEL , CU ¡VNI , NI ALLOY AND OTHER CORROSION RESISTANCE MATERIAL

Bachelor of Commerce, Budgetary Control, Inventory Control, Planning & Analization of materials, setting up new storage system, Vendor development, Administration skills.

PETROLEUM ENGINEER WITH 11 YEARS OF INTERNATIONAL EXPERIENCE

An experienced superintendent with the necessary skills required for the safe commissioning and operation of oil and gas treatment plant

I've been self employed since 1994 as a baker selling fresh baked goods to people restricted to a gluten free diet. Not only have I been the chief baker, I started the business, do all the office work, do all the marketing, maintain the website, etc.

Senior structural engineer with 15 years experience. National Diploma (Civil Engineering)Bachelor of Technology (Structural)

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out