Resume - looking for mechanical/welding inspector position

Misco Jobs

Resume #54096

CONTACT INFORMATION:
View contact information...

Post applied for QA/QC Mechanical Engineer
Personal Information:

Date and place of birth: 09-09-1980 Hyderabad
Nationality: Indian
Martial status: single

Education:
Bachelors of Technology (MECHANICAL ENGINEERING) from Jawaharlal Nehru Technological University (JNTU), Hyderabad, Andhra Pradesh, INDIA.

Certified Welding Inspector
American Welding Society
Certificate No. 05061821.

Saudi Aramco approved QA/QC Mechanical/Welding inspector (SAP # 70005449)

Professional Experience:

(Around 3 years of experience in petroleum industry as a QC mechanical / welding inspector)

Jan 2006 - Present

Faysal M. Qahtani Sons (FMQ) Co.
Al –Khobar, Kingdom of Saudi Arabia
International pipeline and offshore contractors association.
AWS sustaining member.

Project title: Hawiyah NGL Recovery Plant (HNRP) to Shedgum Gas Plant (SGP) C2+NGL (Inspection of cross country, buried externally fusion bonded epoxy (57 km of 24", 58 km of 28" pipelines)

Client: SAUDI ARAMCO

Position: QA/QC Mechanical engineer

Duties & Responsibilities:

Supervision of company existing projects with particular attention to Quality Control/ Assurance, responsible for the execution and monitoring of approved Quality Control/Assurance Manual in the field of Mechanical Engineering and Piping. Preparation and submittal of quality documents to QC Supervisor and /or QA-QC Manager.
Perform in-process and final inspection of mechanical/piping/welding activities that includes, welders testing and on-going shop and /or field welding activities: marking of welds on isometric drawing: recording of completed field/shop weld: verify dimensions of pipe work: supervise hydrostatic and pneumatic testing among others.
Coordinate with client and sub-contractors representative on daily basis to resolve any quality problem or issues.
Preparation and compilation of quality reports/records and other quality related document for activity acceptance and final project handover.
Assist and perform other function as maybe directed by QC Supervisor.

Jan 2005-Dec 2005

M/S REAL- Sister Concern of Reliance Industries Ltd.
Jamnagar, Gujrat, India
Position: Quality Control Engineer.

Duties & Responsibilities:

Inspection of incoming raw materials such as pipes, elbows and structural steels and plates among others.
Verification of physical and chemical properties of construction materials eg: tensile, yield, elongation and its chemical properties.
Conduct process inspections eg: joint fit-up, dimensional check, verification of electrodes with particular attention to the approved welding procedure, welder identification, conducts preheating and post heating inspections of pipe materials.
Final visual inspection of welds and selection of NDT methods and percentage as per specification.
Witnessing of UT, MPT, DPT and interpretation of RT films.
Witness of hydrostatic testing and preparation of hydro test packages.
Experience in fabrication and erection of structural, equipments and columns.

May 2003-Dec 2004

M/S Hyfab industries
Cherlpally, Hyderabad, India
Position: NDT Inspector/Piping supervisor

Duties & Responsibilities:

Inspection and verification of material test report or certification in compliance with material specification and standards.
Conduct visual inspection of SMAW, GMAW, >AW process.
Conduct final weld visual inspection and selection of NDT methods and percentage as per specification.
Witness UT, MPT, DPT and interpretation of RT films.

Specialization:

Having experience n, Refineries TURN AROUND (shut down jobs)
Conversant with relevant Indian & international codes & standards & specification like ASME secV, VIII, & IX. ANSI B31.1, B31.3, API 1104, AWS D1.1, IS 7310, IS 7215, BS 5135.
NDT Inspection activities(UT,MPT,DPT,RT & VT)
Having knowledge in various welding methods of SMAW, GMAW, FCAW, GTAW, SAW process etc.
Having knowledge of WPS, PQR & Performance Qualification for various welding process.
Awareness about mechanical testing e.g.

Tensile testing
Bend testing
Impact testing
Fracture testing

Training/Seminars Attended:

Certified Welding Inspector Seminal & Examination.
American Welding Society
May 2005.

Internal Auditor Training for Quality Management Systems (QMS)
Faysal M. Qahtani Sons Co
FMQ Building, Al Rakha, Dammam
Kingdom of Saudi Arabia
March 20-21 2006.

ASNT (SNT-TC-IA-2006)Level II Certification
SIS Institute of Non-Destructive Testing
* Ultrasonic Testing
* Radiographic Testing
* Magnetic Particle Testing
* Dye Penetrant Testing

SKILLS:
Languages;
Urdu: mother language
English: good written and spoken
Arabic: Read, Write, Speak (working knowledge)
Computer and office work:
Operating System: Windows 95/98, 2000,
Ms-Dos, Ms-Word, Ms-Excel & Ms- Power point,
Auto CAD, Pro/E.

Interests:
Reading, listening to music and traveling.

Licenses:
Indian & Saudi Driving License

References:
To be given upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9151 to 9200 of 15497)

Go to Search Parameters...

Brief Description

Instrument and control technician

looking for mechanical/welding inspector position

Educational Qualification: Passed Diploma in Software – June 1999 Diploma in CAD - March 1991 Diploma in Piping D’man – June 1987 Diploma in ITI D’man (Mech) – January 1987 Plant Designing Management System (PDMS) Ver.11.5

Based on my experience for 15 years working in the Planning and Scheduling with different company and different style of Management also with various type of EPCIC Project I did involved in like Building Constructions, Petrochemical Plant, Offshore Platform (Hook Up and Commissioning) and Turnaround

Diploma of Associate Engineer (Electrical) Working in boc gases as E&I shift engineer.

-6 years experience in Pipeline, Environmental and GIS Project

-Seeking a challenging position in the Mechanical Engineering field especially in the oil and gas. -Solid engineering experience including maintenance, design, manufacturing and oil and gas experience -Bachelor Degree in Mechanical Engineering The University of Reading, England. UK

For the past 6 years, I have had a rewarding career as a mining and geotechnical engineer and as a surveyor. My educational background includes different aspects of earth sciences (Master of Science in Mining Engineering). I have worked in mining operations and R&D as well.

After having mainly matured experiences in the management and maintenance of computer and telecommunication structures of the Company where I worked until last December, now I wish to do new experiences and to develop the old ones in a stimulating and interesting environment.

Chemical Engineer with 6 years experience in Drilling, Pipeline Operation, Construction, Economic Modelling, Health, Safety and Environment, together with Sustainable Development and Issues Management. 6 languages and American Citizenship, would like to work in Houston, Texas.

DCS, PLC Programer, Instrumentation Commissioning Engineer

A fully seasoned Maintenance manager with 9 years of industry experience. Excellent ability in planning and develop methods and procedures for testing (FAT) as well as commissioning of DCS systems. Highly skilled in programming of DCS/PLC systems in controller languages.

Civil Engineer expert in computer and water sector

To secure a position as an Instrument & Electrical Technician.

Versatile, multi-disciplinary, innovative and excellent track record in 15 years working experience including 13 years in Oil and Gas Logistics, Material and Procurement positions which offers eventual advancement into Finance Management looking for Logistics/Material/Procurement Managerial level.

Mechanical Engineer for “construction of piping, hydrostatic test &material control“

More Than five years of professional experience in: Analyzing Business requirements. Usage of ArcGIS, ArcIMS, ArcSDE, ArcXML and ESRI based products.

Search for job in car or food industry.

Business Analyst ∙ Technical Communicator ∙ Facilitator ∙ Trainer +12 years in the IT and energy sectors.

§ Over 12 years experience in offshore well cum process platforms in the Oil & Gas processing industry. § Extensive experience in production planning & process control room operations

Basically I am a Diploma engineer and I have very good experience in offshore, onshore, gas, refinery and petrochemical plants.

Documentum Developer

Resume showing details of personal info, academic qualifications, Job experience, professional skills, volunteer experience

See below

same as resume one

15 years experience in implementation & maintenance of ISO 9000 QMS, Internal Audits, preparing QA/QC procedures, Quality control in construction of Tunnel, sewer/storm water pumping & lift stations, drain & sewer pipelines, Cross regulators/falls, siphons, bridges.

Searching for a position within the Construction & Civil/Structural Engineering profession, in a progressive employer that provides career growth and excellent advancement opportunities.

Experience in stream assessment, macrobenthic ID, wetland delineation, Section 401/404 permitting, NEPA and SEPA, protected species. formal training in wetland delineation, extensive field experience, in Texas, North and South Carolina, Virginia, and Venezuela.

I’m a Computer Aided Drafter/Designer with 15 yrs experience in various fields. I use AutoCAD up to version 2002, IDEAs SDRC v. 7-9. I’ve worked some with MicroStation and AutoDesk Inventor. I am looking to relocate to Virginia or Pennsylvania Reading area.

Drilling Rig equipments maintenance and repair mechanic with 15+ years experience in oil industry. Excellent maintenance ,repair and rebuilding experience of Cummins caterpillar diesel engines , Allison transmissions relate to oil industries.

I want to relocate to USA/UK/CAnada,hence need an employer who can hire me and sponsor me for visa.

Sex : Male Place & Date of Birth : Jakarta/9 September 1967 Marital Status : Married with 2 children

Industrial Engineer with strong research,analytical,leadership,communication, interpersonal skills Self motivated,persistent,adaptable,efficient in managing multiple projects simultaneously Proven ability to work efficiently in independent and team environments in diverse work cultures

Project management, maintenance engineering, mechanical design

More than 15 years in oil and gas production experience on DCS and PLc fluent in English my main language is French. Available for any jobs all over the world

M.Sc. Applied Environmental Science B.Sc. Geology Houours Expertise: Waste Management, EU Environmental Legislation, Environmental Impact Assessment, Ecology, Communications, Project Management

ROV Supervisor with 15 years experience.

New calédonian based Exploration and Mine Geologist, 5 years experience. Project management, core logging, mapping, strong structural geology skills. Proficient in the use of SURPAC, MAPINFO, GPS programs, Corel graphics and database programs. Available worldwide. x

10+ years of project management experience in the areas of accounting and financial reporting in various industries, including Management Consulting, Retail and Wholesale, Manufacturing and Distribution, Mining and Construction

Provides well site supervision for all aspects of drilling, Work over and completion activities on both drilling and work over rigs.

Dear Sirs, As you can see on my resume, all my experience is on Marine and Oil related Bussines, if any additional information is needed, please do not hesiate contact me.

1992 NTT research, Tokyo, Japan (trainee), 1993 - 1997 PhD exp. Physics, 1997 - 2000 reservoir engineer (RE), oil major's research lab, 2000 - 2002 RE Russian offshore oil development, 2002 - 2005 RE, Al Furat Petr. Co, Syria, later section head and subs. asset man.

I have a total of nearly 13 years experience drafting, with about 9 of those years in the home building business. I also have 5 years in Coil Production (AC, Steam, Condenser, & Air Handlers) I have developed custom designs for previous companies specifically tailored to the customers needs. I have

Operate fractionation plant, lean oil extraction plant, refigeration plant, instumentation work, maintenance work.

4 years underground mining experience, current MSHA, 2009 Underground Blasting Training Course, Underground Core Skills Program,

I have diploma in Surveying and 4 years exp in High rising Bulidings. I can operate all kind of Survey instruments

Diploma in production engg.and nace level-1 & 2 are comleted

Currently I am working as DCS plant operator at Distillation unit, having capacity 27000 BPD.

Preparation of Static Equipment Drawings Using Microstation & Autocad

Inlet gas system,TEG Regeneration and Treating system,Amine Regeneration and Treating unit..

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 [ 184 ] 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out