Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #5508 next resume »» CONTACT INFORMATION: View contact information... QUALIFICATIONS 4 GCSE and 5 CSE RECENT COURSE GOC - Guidance On Certification The course covered procedural and certification requirements for inspection and test activities for fabrication, construction, pre-commissioning, commissioning, leading to 'Handover' of works to the operator. CAREER HISTORY February 2003 – April 2004 Finec Project Sourcing For Sakhalin Energy Investment Company Document / Information Management Projects: Sakhalin Ii Phase 2 Project – Netherlands / Russia Design, Construction, Commissioning, Start-up and Hand-Over of two platforms cross-country and sub-sea pipelines, production, storage and loading facilities. Responsible for the management of data and control of in-house and contractor document deliverables, utilising the electronic document management systems, LiveLink, ASSAI and AHA4P. Provide assistance to the Document Manager in all aspects of document / Information management. Monitor / supervise SEIC staff and contractors relating to document creation, management and control. Track and expedite documentation. Circulate status reports for SEIC team members. Where applicable ensure that paper based documentation was electronically captured and placed in the project / corporate memory. June 2002 – December 2002 G.P.W. Design Services For Wolfson Maintenance Manchester UK Documentation Manager Projects: DFAMP Project, Dukhan – Qatar The task also involved the collation and control of drawings and documents relating to the asset verification of some 600 wellheads and associated pipelines and plants within the Dukhan Oilfield and the Gas Uplift Project, NGL4. Responsible for the upgrade of the Dukhan Oilfield technical library facility at Qatar Petroleum's offices and the upgrade/replacement of the associated electronic document management system. The task involved the review of the library facility, its contents and the EDMS. The task also included the management of a small team of local and foreign labour who were utilised to carryout the control of the project documentation and the technical library facility whilst in the process of change, the categorising, cataloguing and indexing of some 15,000 volumes of technical and reference data relating to the oilfield and the associated plants. The task being inline with new corporate procedures that were being introduced. Dec 2001 – June 2002 Acumen Technical Services for Glaxo Smith Kline, Stevenage UK Document Controller/Project Engineer Projects: Various Capital Projects Responsible for the expediting and collation of vendor and contractor documentation, generation of the Operation and Maintenance Manuals concerning validated systems within the Chemistry Pilot Plant facility and non-validated project work site wide to company procedures and recognised standards. The remit of the work carried out also included the financial closeout of the projects and weekly reporting relating to the status of the projects. July 2000 –December 2001 Rullion Engineering Division for British Nuclear Fuels Limited, Warrington UK Document Controller Projects: BOX Encapsulation Project, COSR Project Assigned to the Box Encapsulation Project to carry out the task of analysing the present status of in-house, infrastructure and sub-contractor documentation up to the design and build phase of the contract. Once the initial analysis was finalised, produce an implementation plan to resolve the historic document problems and future document control system compliance. Responsible for the control and the electronic capture of documentation, the generation of the audit trail relating to Continued Operation Safety Report [COSR] concerning nuclear facilities. Main task being the collation of multi disciplined in-house, vendor and sub-contractor documentation. [Approximately; 1,500 – 10,000 documents dependent on the size of the facility]; onto the electronic document management system [IcePAC], prior to the delivery of the COSR Audit Trail to the Plant Manager and finally to the Nuclear Installations Inspectorate Jan 1998 – July 2000 G.P.W. Design Services for Whessoe LGA, Darlington UK Document Controller / Project Engineer Projects: KGE Pilot Membrane Tank, [LNG] Inchon – Korea, Reliance Cryogenic [LPG] Jamnagar - India Placements in Germany & India Responsible for control of in-house, vendor and sub-contractor documentation relating to the LPG storage facility and the associated plant and trains. The main task being the implementation of an in place system to control and manage the flow of documentation between several countries and departments with a minimal turn round time, collation and distribution of technical information i.e. contract specific procedures, drawings and calculations. Other duties control and generate a data bank relating to project correspondence, generate and compile BI-weekly progress reports. The data progressed, generated and managed with Microsoft Office Suite and the EDMS Primavera Expedition. Transferred to Site office India for 3 months to control and co-ordinate local labour in respect of pre test punch list checks and pressure testing of completed piping systems and the appropriate documentation required. Return to the satellite office in Germany to finalise the handover documentation for the original project and control documentation for Phase II of the project. After the closure of the satellite office in Germany, returned to the head office in Darlington UK to closeout phase I and phase II of the projects in India, and to set-up the new Pilot Membrane LNG Tank Project. March 1996 - Sept 1997 Sicilmontaggi Spa, Priola, Sicily, Italy Document Controller Project: Leuna 2000 Refinery Germany Responsible for managing and controlling site documentation. Collating and recording the issue and receipt of technical documentation and project correspondence. Control and distribution of internal documentation and technical data received from Sicil's fab shop in Priola Sicily, the site fab shop and sub-contractors. Compilation of final handover documentation. Jan 1995 - March 1996 Sutton Technical Services, For A.O.C Limited, Ellesmere Port UK Document / Certification Controller Project: In-House Assigned to the W.E & S. Department. Responsible for generating certification records for the overhaul of major pieces of equipment used in the process of a Petro - Chemical Plant. Management of the company bespoke EDMS and generation of monthly reports on over hauled plant equipment, manhours figures against plant areas, cost labour and external expenditure for monthly progress meetings. May 1994 - Jan 1995 C & J Kilroe Ltd, Sandycroft, Deeside, Flintshire Document / Certification Controller Project: Various [Oil & Gas/Petro – Chem] Responsible for the documentation / certification within a QA/QC department relating to the fabrication of pipe-work, PAU's and welders specification for Oil and Gas facilities and Petro - Chemical plants. The monitoring of NDE requirements and welder qualification records. Other responsibilities included the supervision of two document / technical clerks. Jan 1994 - May 1994 Caxios Ltd, Dee Works, Saughall, Chester Document Control Assistant Project: Shell Romp Project, HDS2 & Solvent Shutdowns Responsible for the collation and issuance of information relating to final handover documentation, the breakdown of QA packages in to systems and areas. Other duties included the compilation of test packages for piping and associated equipment. March 1993 - Oct 1993 C & J Kilroe Ltd, Sandycroft, Deeside, Flintshire Documentation / Technical assistant Project: Various [Oil & Gas/Petro – Chem] Working within the QA/QC department duties and responsibilities included the smooth flow of documents relating to data packs so that pipe-work could be released to site or the in-house coating department. The set-up and implementation of the EMDS Weld Inspect, which was used to compile ongoing weld records and QA/QC, related documentation. March 1992 - March 1993 Caxios Ltd, Dee Works, Saughall, Chester Technical Assistant Project: BP Kinneil Terminal & Kg Ethylene Originally employed to compile and complete QA packages for the remainder of the KG Ethylene Project, then transferred to the Kinneil Terminal Project to assist in the set-up and day-to-day control of QA/QC system. Other duties included liaison with BP Inspection / Certification department to achieve a fast turn around for the weld test plans. Jan 1992 - March 1992 Fieldweld Construction, Blackburn Street, Liverpool Technical Assistant Project: Various Responsibilities and duties included compilation of final stages of client as built packages, archiving of documentation relating to previous contracts i.e. drawings, purchase orders and staff records. Sept 1991 - Jan 1992 C & J Kilroe Ltd, Sandycroft, Deeside, Flintshire Technical / Document Assistant Project: Various [Oil & Gas/Petro – Chem] Responsibilities and duties, documentation of all new and revised drawings, compilation of QA data dossier's to be released with final shipment. Release of completed isometrics to the coating and lining department. Compile data bank of all NDE reports / radiographs produce material traceability records. Advise production department of client accepted isometric's available for shipment. Aug 1989 - Sept 1991 Fieldweld Construction, Blackburn Street, Liverpool Technical Assistant Project: Various Responsibilities and duties, compilation of as-built dossiers, compile data bank of all NDE reports / radiographs and produce records / register's relating to traceability, PQR's, WPS's welder qualifications and PWHT. Generate isometric weld plans and assist the dimensional inspector on the shop floor. References will be provided on request. View contact information... «« previous resume next resume »» Search Results (Resumes 9251 to 9300 of 15477) Go to Search Parameters... Brief Description Civil Engineer from REC Kurukshetra, India. Working as Assistant Manager (Civil) with Larsen & Toubro Limited - ECC Division 15 year career of Document Management and Control. Assisted in the development and implementation of EDMS. Held over sea positions in various European locations, Middle East and Asia. Conversant with International standards, guidelines and regulations. A Nigerian. Qualified and experienced geoscientist with 5+years cross-functional experience. multi skilled engineer Professional Geoscientist with 7 years international field experience in mineral exploration. Setup, hiring, training of field teams of local geologists. Archean lode Au, umf-hosted Ni-sulfide, porphyry Au-Cu and gemstones. Dutch Guyana, Madagascar, Tajikistan, Uganda, Mongolia, Canada, Mexico. To offer services as Senior piping designer for onshore and off shore oil and gas projects by using PDMS & PDS 3d model system Process Engineer 10 years O&G + Mining Experience, Global leader in BR&E Promax process simulation, Gas Dehydration, Water Treatment (both produced water and seawater injection), hydrocyclone, flotation and filtration technologies. Comfortable from the Pre-FEED level down to the nuts & bolts. Fourteen years of experience in Office Administration, Procurement, HRD, Public Relation and Sales Coordination has energized me to seek suitable position in renowned companies. My quest is to further broaden my horizons so as to facilitate better opportunities to serve &better objective to achieve Responsible for business development of company & for recruitment of professionals like Project Managers, Engineers, &Technicians for Engineering, & Construction industry in India, Middle East, ,etc.To develop and manage our own portfolio of clients and source the most suitable candidates . International Weldig Engineer (IWE) , CSWIP 3.1 and Level II(two) Pt,Mt,Ut and RT Degreed in occupational safety and health, 18 years experience in construction safety, sveral yrs. Overseas exp. Working with multi-national staff. Excellent medical background I am a practicing Health & Safety professional and I have built substantial experience as an HSE Advisor with various organizations onshore, offshore and internationally. A highly qualified and experienced marine engineer, with extensive experience on LNG ships. Skilled in all management roles and function including IT. A skilled problem solver who takes general overview and generates viable solutions. Being an AutoCAD Drafter/Technician, I have had tremendous experience (10 years) in the Building Construction as well as Mining industries. Proficient in AutoCAD with 3D applications, Basic knowledge in Microsoft Word, Excel, IntelliCAD. Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes HSE Manager/adviser with 25+ years experience with large multi-national corporations. Developed successful top quartile HSE/Safety programs on 4 continents. Expert in HSE management, risk assessment, and HSE/safety auditing techniques. Metreculation, pree degree, diploma in fire and safety and OASHA Rigger at mine construction uderground rigger,structural erection steel fabrication,demolist and asembly. 3G licence welder, scafolder. Fresh graduate QS looking for job Exceptional performance as a Senior Process and Production Engineer for major industrial, polymer, refining, and specialty chemical manufacturing companies on the Texas Gulf Coast. I have 25.5 years experience as a professional fitter/welder with 4 years as a certified welding inspector performing visual inspection of welds on pressure vessels, piping, storage tanks and structural components. U.S Navy Aviation Gas Turbine Jet Mechanic -A team player, flexibile, detail-oriented, and self-motivated Working as a CNC Lathe machine operator from 04/11/2008 to till date in L&T Plastics Machinery Limited(Injection Molding).,Chembarambakkam, Chennai . Acquisition and title research 7 YEARS OF RIGGER EXPERIENCE Mechanical techanician diploma Professional Mining Engineer (CEng MIMMM) searching for senior level position in a open pit mining project in FSU Over 11 years of SAP BW BI experience as a developer, Lead and Manager Diploma In Mechancial Engineering+NEBOSH Level-3+Environment, Health and Safety Management Specialist Certification from NASP of USA+ ISO 14001:2004 & 9000:2000 Certified Lead Auditor with 15 Years Experience in Oil&Gas as HSE Advisor/Engineer/Supervisor/Coordinator/ I have more than 15 years experience in the field of process control instrumentation and analyzers and have many related field trainings from abroad and in Pakistan. I am forwarding my personal profile for your consideration. Draftsperson - coil tubing downhole tools, coil tubing wellheads, etc Engineering experience since 1999 in diversified electrical, instrumentation, automation, and industrial computer applications, generally related to Oil & Gas Industry, Steel, Automotive, Aluminum, Process and Machine applications. Experience Derrickhand Project Expeditor Mechanical Engineer Professional experience of 35+ years in Engineering and Project Management Pipe Fabricator all duties that come with shop work. Hydro Test Pipe and Numatic Test Pipe for all and any leaks. AutoCad drafter Piping Designer – 3D Modeling - PDMS - Microstation - Plant Space – 3DM - Auto-CAD I have a 4 years degree in geology with a relevant experience as wellsite geologist. Actually I have witnessed more than 30 horizontals wells drilled and 10 verticals one's.I can say that I have gained a great knowledge of how to solve drillings problems when they occur. Having more than 9 years of experience in petrochemical, oil & gas process plants and utilities. Having experience in commissioning, pre-commissioning activities in Field, DCS & SCADA. (FOXPORO & Emerson Delta-V Systems) Wetland Studies, Wildlife Research, Environmental Assessment, Endangered Species Survey KEY RESPONSIBILITIES :1. Transmission engineering in designing backbone links,2. Transmission network design, link budgeting for transmission links,4. Planning of STM-1 Ring Network in City and Backbone to have a Reliable Network with a uptime of 99.99%,6. Microwave Projections for the additional Si shipping Management, Stevedoring, Logistics Landscape Arch with varied experience of the micro and macro level design and execution of private and govt. projects Key specializations: GE Turbine control systems- MKIV, MKV, MKVI, GE excitation systems- busfed, potentialand compound source, SVR, rotating DC, brushless, EX2000, EX2100, Load commutated inverters (static start), electrical and generator protection. DLN 1.0, 2.0+, 2.6 systems, versamax PLC, genius BE (MECH ) PIPING DESIGNING & STRESS ANALYSIS ITI DRAUGHTSMAN MECH WITH KNOWLEDGE OF CIVIL, ARCHITECTURAL,WORKED IN BUILDINGS,ROADS ,RETAIL SECTORS WITH EXPERIENCE OF MORE THAN 9 YEARS,FLUENT IN ENGLISH.GOOD SPEED IN DRAUGHTING WORK. Well Engineering skills First   Prev   151   152   153   154   155   156   157   158   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   [ 186 ]   187   188   189   190   191   192   193   194   195   196   197   198   199   200   Next   Last Seach Parameters Goto Advanced Search... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com