Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #58223 next resume »»
CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE

Name of the employer
Presently employed in: SOUTHERN PETROCHEMICAL
INDUSTRIES CORPORATION LTD (SPIC).

SPIC (6 years): Process plant Operator in On-shore
Oil/gas treatment Plant – SPIC (Ammonia Plant and LPG import and storage terminal).

ONGC HAZIRA – GUJARAT: Deputed to ONGC HAZIRA, Gujarat (5 years)for standard operation and trouble shooting in on-shore oil/gas plant
Gas Sweetening Unit (GSU)
Gas Dehydration Unit (GDU)
ONGC CAUVERI project: Process Plant Operator in On-shore
Oil/gas treatment plant.
SYSTEMS: DCS Control room, Separators, Gasturbine, Compressors, Pumps, Blowers, Valves, Heat exchangers, Absorbers and Regenerator Column, Pressure filters, Water softner units (cation and anion exchangers), condensers, and Pre-heaters.

AREA OF EXPERIENCE

DCS control room operation

(i) Centum XL
Make - Yokogawa
Model - Centum XL

(ii) Delta V

Make - Rosemount
Model - Delta V
Capacity - 750 tags

LPG IMPORT & STORAGE TERMINAL

Capacity-10,000 mt
Double integrity cup in tank
And related refrigerating & flare systems.
Separators

Harizontal and Vertical Separators ( High & Medium Pressure )

Gas Sweetening unit ( ONGC)

Process - MDEA process licensed by M/s. SNEA (P) France
Capacity - 5 MMNM3 /D
Gas dehydration Unit

Capacity - 5 MMNM3 /D
Hygroscopic medium - Try ethylene glycol. (99.7 % wt)
Gas Turbine

Manu facture - Ruston gas Turbine Limited – England
Model - TB 5000
Capacity - 2.5 MW
Fuel - Duel Fuel

COMPRESSOR UNIT

Loop refrigeration Compressor (LRC)
Capacity - 56,724 Nm3/Hr
Synthesis gas Compressor (SGC)

Capacity - 1,30,522 Nm3/Hr
Re circulator capacity - 5,30,000 Nm3/Hr
Tank Farm

Naphtha tanks - 5 Nos
Type - Floating roof Type
Capacity - 8750 KL (Each)
Fuel Oil - 2 Nos
Capacity - 3800 KL (Each)

Hydro fining Unit

Sulphur content reduced from 1500 ppm to 5 ppm
Process - IIP – IFP Process
Capacity - 32 T/hr.
Catalyst - HR-101 (CoMoX)

SAFETY MOCK DRILL
Once in three months safety mock drill is conducted. Officials will inform a dangerous condition in our area and they will declare emergency. All the personnel will handle the situation efficiently, quickly and properly.

SAFETY PROCEDURES
Well experienced in handing over any equipment for maintenance in a SAFE WAY knowing all procedures like ELECTRICAL CLEARANCE, CABLE Disconnection / Connection, isolation, flushing, purging etc.

Good experience in following all safety procedures to be followed during Vessel Entry, Hot work like welding, cutting, high elevation job, and excavation jobs etc.

Having good knowledge about LEL & HEL of various chemicals.
Well trained in using H2S detectors, Gas monitors.

PTW SYSTEM
Experienced in preparation, issuing and following up of permit systems for Hot work, Cold work, Vessel Entry, Road closer, Excavation, work etc.

PPEs
Well trained in wearing and using all Personal Protective Equipments (PPE), Self Contained Breathing Apparatus (SCBA) etc.

FIRE FIGHTING
Well trained in operating all types of fire extinguishers, attended intensive fire fighting training, experienced in Fire protection and put-off procedures in Tank forms, well versed in On-site and Off-Site Emergency Preparedness Plan.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 4051 to 4100 of 15298)Go to Search Parameters...
Brief Description
Structural design and supervision
MWD/LWD, Steering tools, sales, I haven't done it all but have done alot.
Knowlegle in the field of civil and structural engineer
Experienced Land Surveyor (Geodetic Engineer/Surveyor)
Instituted and formulated the safety and health program for the Company in accordance with the guidelines prescribed for this purpose
Currently seeking a challenging & demanding position that allows me to acquire new skills and use of my unique skills and experience. Do desire a work environment that fosters teamwork & encourages independent responsibilities and challenges.
HVAC ENGINEER HAVING 5 YEARS EXP IN MIDDLE EAST
Civil Designer specialized in the field of Oil & Gas preparing 2D drawings & 3D models.
I would like to draw your kind attention to the matter that I am searching for a challenging carrier with your esteemed organization and providing my Resume here in with.
High Voltage , Substations , Power Projects , Tendering , Bidding , proposals,
M.TECH, METALLURGIST, 5+ YEARS EXPERIENCE IN METALLURGICAL PROCESS INDUSTRY LIKE STEEL, COPPER.ALSO R&D EXPERIENCE
To collect quotations from parties. Mainly three quotation for single items And prepares relevant comparison sheets.
condition monitoring and maintenance field of oil & gas industry as well as fertilizer industry I know the sap and vibration technology
A highly qualified and experience Project Engineer with more than 5 years industry experience. Proficient in the use of a diverse range of computing technologies with an excellent understanding of laboratory techniques
ONLINE INSPECTION OF DRILLED COMPONENTS USING IMAGE ANALYSIS SOFTWARE
I am a experience plant operator seeking for a full time position in a goal oriented company
NACE CERTIFIED COATING INSPECTOR WITH 8 YEARS OF COATING EXPEREINCE
I am well qualified as a seisimic data processing geophysicist (2D/3D)-marine and land.I have had both -onshore as well as offshore data processing experiences. I have been substantially trained in the depth imaging techniques as well. Wxcellent communication skill is one of my strongest forte.
diplamo electronics & communication engineer
14+ years hands on experience in GIS Specialist, domestic and international
Drilling engineer with experience in directional drilling and programmer skills
Over 17 years of experience in Oil, gas and power projects such as LNG plants, offshore projects,refineries, gas based simple cycle, cogeneration and combined cycle plants, steam turbine based plants etc.
Mechanical Engineer Graduated as DI. Sulzer Metco AG (Switzerland) CH Wohlen Valuarc Thermal Spray Zinc. Metallization Arc spray School of Thermal Spraying Technology UK. Qualified applicator for all types of fireproofing and modern coating systems. A.I.O.C permit to work system.
producing Sulphuric acid 98% min. Conc. & Linear alkyl benzene Sulphonic acid, • Directly responsible for the overall management of the plant, production, Maintenance and safety, • Starting up and shutting down the plants, • Make the modifications of P & I Diagram as per requirements and Very goo
I am searching for employment as an engineer in the Mining / Oil&Gas Industry. My education and early job experience were mining related. My past nine years were spent in oilfield services. I believe that I would be an asset to a company in either field.
Civil Structural Engineer
Experience in Quality Assurance, QA Auditing to meet industry Standards, QA Training, Document Control, Safety Programs, Management and Outside Sales. I have extensive experience and training in QA/QC programs i.e.; auditing of all suppliers’ facilities throughout the United States.
Rich experience in LNG panel operations.
Able bodies Mud Engineer with wide range of Oilfield Service Experience.
Over 6 years of extensive experience in the field of Structural design using International Codes. Design Experience in various fields of civil engineering including oil & gas (Equipments used in Oil & Gas offshore structures). Extensive experience in Conceptual & Detail Engineering.
Civil/metal structure engineer from Russia. Designing of of oil refinery and petrochemical enterprises. Languages: english-communication (IELTS 6.5).
Drilling Engineer, work for many oil companies, Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives. First-class analytical, design and problem solving skills. Dedicated to maintaining high qua
Managerial assignments in Mining / Control with an organisation of repute
9 years of experience in Inspection, Welding, and Destructive, Non ¡V Destructive Testing, Calibration, etc.
Asset Maintenance Management, Preparation of maintenance base data for ERP like SAP, Maximo, Oracle CMMS packages, Material Standardization for OIL and Gas sector (Onshore and Offshore).
Professional Knowledge of Pipelines, Piping, and Pressure Vessels Design Codes and Standards, Defect Assessment Codes, Federal Regulations, and Industry Best Practice, ILI Consultancy
BSc Transport and Logistics (UK). Proven track record within logistics and recruitment to the same industry. Searching challenging new position within Houston/The Woodlands area.
Instrument & Control System Engineer having 5 years experience in Oil & Gas
I am a Petroleum Engineer with over 6 years professional experience to offer you.
Bechlor of Engineering in Mechanial Discipline
Electrician management
i am original pipeline line engineer ,as well as project engineer
Civil / Structural Designer with 18 years experience both local and abroad in design and computer–aided drafting for the architectural and Civil / Structural disciplines. Project structures undertaken include nuclear treatment, power plants, Offshore/Onshore & petrochemical plants projects
Drilling Supervisor, Drilling Engineer, Mud and Cement Supervisor, Mud and Cement Engineer
Oil and Gas (15 years) Condition Monitoring (13 years) Reliability Engineer (8 years) Training (10 years)
Gold plant processing,School of Chemical and minerals engineering-advanced minirals processing Pothefstroom University 1998
operation and monitoring
I have wide industry experience in leadership, engineering, commissioning, maintenance and production mainly in the Oil and Gas industry. This experience includes both onshore and offshore production facilities including 7 years on an offshore production and drilling platform.
Bachelor Engineering Degree, BSC Geology, 10 years oilfield experience, Mud Engineer, Data Engineer, Geologist and Reservoir Engineer
My entire experience relates to substation & transmission line construction, maintenance, protection & instrumentation and project/design review engineer
First   Prev   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   [ 82 ]   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2010 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com