Resume - Plant inspection, QA/QC, Welding inspection, condition monitoring

Misco Jobs

Resume #5869

CONTACT INFORMATION:
View contact information...

PERSONAL DETAILS

Nationality: Indian
Religion: Hindu
Date of Birth: 18th August 1974
Availability: One Month notice

EDUCATION

DIPLOMA BOARD % OF MARKS
B.TECH IN MECH. ENGG. J N T UNIVERSITY, INDIA 70
DIPLOMA IN MECH. ENGG. STATE BOARD OF TECHNICAL EDUCATION, A.P.,INDIA 90

TECHNICAL TRAINING COURSES

* CSWIP – 3.2 (Senior Welding Inspector) by TWI, UK.
* Certified welding inspector by American Welding Society (AWS), USA.
* Certified welding inspector by Welding research institute, BHEL, Trichy, INDIA
* ASNT level-II in UT,RT & MPT.
* Certified Radiographer by BHABHA ATOMIC RESEARCH CENTRE (BARC), INDIA.
* In-house training in Eddy current testing by Eddy current technology incorporated, Virginia, USA.

EXPERIENCE:

* Total years of experience: 9 years
* Period of experience: 1995 August – Till date

EMPLOYMENT HISTORY

PRESENT EMPLOYER: M/s Samsung Corporation, Korea
(from 2003 Feb to till date)

Project: 3 nos. LPG tanks for Qatar Petroleum, Qatar

Project Details: Engineering, Procurement, Installation & Commissioning of 3 nos (1 00 000 M3 )LPG Tanks & Conversion of
Existing 2 Nos Propane tanks to Butane Storage Tanks for Qatar Petroleum.

Position: Sr. Inspector – Tanks & Piping

Period of Working: 2003 Feb to till date

Responsibilities:

1. Inspection and Quality control of Tank welding activities as per qualified welding procedures.
2. Carryout welder qualification test for welders and also PQT and PTP.
3. Witnessing Lifting equipment load test.
4. Inspection of all static equipment before installation and document review of vendor.
5. Verticality and alignment check of all structural members like columns, pipe racks etc.,
6. Interpretation of Radiographs, Review of NDT reports.
7. Monitoring of welding activities like electrode backing, preheating, Inter-pass temperature.
8. Preparation of weld history sheet, parameter records and dimension report.
9. Witnessing and monitoring of PWHT in shop and site.
10. Document review and making punch lists.
11. Interpretation of drawings, welding symbols and dimensional inspection.

PREVIOUS EMPLOYER: Nagarjuna Fertilizes and Chemicals Limited, India

The double stream Naphtha and Natural gas fertilizer plant producing urea (4800 MTPD
capacity) with necessary offsites and power plant facilities

Period of Working: 1995 August to 2003 February

Position Handled: PLANT INSPECTOR

Responsibilities:

* Inspection of all static equipment like Pressure Vessels, Heat Exchangers, Columns, Reactors connecting pipe lines, Furnaces, Boilers and Storage tanks.
* Periodic survey of thickness of equipment such as Columns, Vessels, Tanks etc and Piping systems using Ultrasonic thickness meters. Corrosion monitoring of all static equipment and piping through computerized trending of thickness.
* Preparation of check lists, schedules for inspection / NDT like thickness measurement of static equipment and pipeline, temperature measurement, Ultrasonic flaw detection, radiography, Dye Penetrant test, leak testing of heat exchangers and strippers and Magnetic Particle Testing based on operating conditions and fluid handled.
* Inspection of static equipment & pipe lines by conducting LPT, Fluorescent LPT, MT, Fluorescent MT, RT, UT.
* Positive Material Identification (PMI) and Hardness measurement (by Rebounce technique and ultrasonic methods)
* Ferrite check of Stainless steel by Ferrite meter.
* Generating inspection reports of findings and observations in time to make necessary corrective actions.
* Planning turnaround inspection activities and co-ordinate and complete the jobs in-time as per schedule.
* Stage wise Welding inspection of static equipment and connected pipe lines.
* Inspection of plant equipment at vendor before dispatch.
* Inspection of Heat exchanger tubes by Eddy current testing using highly sophisticated computerized ECT equipment (ectmad8D software).
* Internal inspection of Side fired vertical reformers, Long towers and Acid storage tanks and Boilers in annual turn-around and short shut-downs and preparing reports with necessary recommendations
* Fibroscopy inspection of pipelines and heat exchanger tubes for corrosion and erosion assessment.
* ID measurement using HOLE GAUGE in Urea stripper tubes and heat exchangers.
* Positive material identification of pipes, fittings, Valves, Bars, Plates etc., using sophisticated equipment like SPECTROPORT & ALLOY ANALYSER.
* Condition assessment of Rubber lined Vessels and Tanks by holiday detection testing & Shore-A hardness measurement.
* Leak detection of heat exchanger tubes, vacuum systems etc by using Ultra probe, Vacuum leak detection kit.
* Temperature scanning of high temperature equipmì¥Á 7 ø ¿ ›

INCLUDEPICTURE \d "Quality Resume_files/gldline.gif"

PERSONAL DETAILS

Nationality: Indian
Religion: Hindu
Passport Number: B – 1782681
Date of Birth: 18th August 1974
Availability: One Month notice
Contact Phone Number: +974 – 5291210 (Qatar)

EDUCATION

DiplomaBoard% of marksB.TECH IN MECH. ENGG.J N T UNIVERSITY, INDIA70DIPLOMA IN MECH. ENGG.STATE BOARD OF TECHNICAL EDUCATION, A.P.,INDIA90

TECHNICAL TRAINING COURSES

CSWIP – 3.2 (Senior Welding Insp consumables required for regular inspection and shutdown activities.

* Making Correspondence with different vendors to identify required NDT consumables.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9251 to 9300 of 15341)

Go to Search Parameters...

Brief Description

Planning Engineer, Certificate of degree Dr. of Philosophy

Professional graduate engineer experienced in Facilities Management, CMMS implementation and application, Technical Writing. Recent 16 months in Kazakhstan. Interested in contract work (rotational or short-term)

Document Controlling, Secretarial,Administration

I am a Mechanical Engineer with around 9 years of experince, with knowledge in construction project manage. Desing of wellhead equipment, and drilling equipment, certified in none destructive examination.

Familier with oil refining process an simulations:HYSYS,Flare net - Familiar with CDU (Crude Distilation Unit) /VDU (Vacume Distilation Unit) /HCU (Hydro Craker unit) /NHT,Unifiner,CCR /LPG /VBU (Visbreaker Unit) /AMINE /SWS (Sure Water Stripper Unit) /SRU (Sulphur recovery unit)

Wireline senior field engineer

I did Diploma in 1999, Graduation in 2002 in Mechanical Engineering & Post Graduations in Energy System. I am very much interested in the energy efficiency. Presently i am working in the THERMAX India Ltd, as a Sr. Executive - Proposals. My job profile is Process design of API type Fired Heaters.

Instrument Tech / Electrical Officer (ETO) / Electronics officer

Extensive experience in piping layout, stress analysis & Support gad, Isometrics & BOM, procurement assistance, site engineering survey & site assistance during Project execution and project management.

Qualification-Diploma in Mechanical Engineer

M.B.A. and Licensed Professional Mining Engineer with record of success in operations and engineering management. Creative problem solver with ability to develop real economic profits, lead during change management and create business strategies.

20 years in the construction industry ranging in the welding field of building food processing plants,to oil field industries,Commercial diving opperations I also aplied my knowledge toward the osha programs as a Safety Specialist started work with the Navel Stations with contract for the Navy.

Reservoir Geology, Calculations of Hydrocarbons in Place & Analyzing All Parameters Which Affect the Results and their uncertainties, Reservoir Mapping(structural, petrophysical & facies) to make up the Geological Model, Dipmeter Processing & Interpretation Using Incline Software, Fault sealing an

Drilling Engineer & Manager (on & offshore with deep water) some completions

50k to 100k US per Year

ROTATING EQUIPMENT ENGINEER OBJECTIVE: Successful career in oil & gas industry as Rotating Equipment Engineer

International experience in both drilling and production

Overall 8 years working experience in Document Control / Technical Clerk / IT Assistant / Planning Assistant. Very good knowledge in Computer networking, operating system, office software, specific software, software development, etc.

PROCUREMENT ENGR

looking for mines manager job as i am second class mine manager certificate holder from directorate general of mines safety under India mmr 1961. and having nine years of experience in different minerals as a mines manager asst. manager.

Position Manager Instrumentation & Controls Summary of Experience: Specialist in Instrumentation and Process Control Systems Engineering & Commissioning with over thirty three years experience of grass roots Lump Sum Turnkey projects worldwide.

To obtain gainful employment in the Software Engineering field with an organization that will benefit from my knowledge and experience.

•Seismic data acquisition and processing •Punctual, motivated, achievement oriented, highly organised and competent individual •Team player, able to work under pressure and to meet deadlines

I have done my M.S.(Control System Engineering) from Texas A&M University-Kingsville with G.P.A as 3.9 /4.0. I am looking for a job of control System Engineer. I have work experience of 1 year and 4 months. I am willing to relocate anywhere in USA. Thanks Rajesh

OBJECTIVE Focusing on Project/Interface Engineering positions in the energy sector encompassing deepwater production/operations, project development, commercial and technology development.

OBJECTIVE Find a rewarding position, which both recognizes and rewards performance. A place where someone is able to establish their skills and be capable of learning at the same time.

Experienced electrical and mechanical pipeline tech.

Security Technician

Seeking a suitable electrical position that will utilize my skills and offer growth in the mining, manufacturing or construction industry.

Seeking a challenging position in Environmental Engineering field, Environmental safety and Health, Environmental Quality Monitoring, Water and Waste Water projects where I can apply the knowledge that I have learned and gained practical experience and serve the organization.

Plant inspection, QA/QC, Welding inspection, condition monitoring

15 years of experience in repairs and maintenance to construction plant and machinery and 10 years at supervision/managerial level Plant predominantly Caterpillar

Innovative Petroleum Engineer, who is a proven performer achieving great results in the past assignments. Excellent ability to work with multifunctional teams and experience in international locations. Eager learner. Masters degrees in both Computer Science and Petroleum Engineering.

Piping Design And Pipe Stress Engineer with 9 years of experience working with Worlds Largest Grass Root Refinery of Reliance Industries Limited at Jamnagar, Gujarat , INDIA.

Applying my educational experience into real life. I am particularly interested in an executive mid career position in a multi national or a well-established organization.

Strengths in project management, problem solving, team leadership, instrumental analysis, laboratory techniques, analysis data, research proposals, design interactive website, poster, oral presentation, Stella computer modelling, Outlook, MS Office Suite, Adobe Photoshop, and Fusion.

Assets/inventory co-ordinator

Professional experience - Problem solving and design modifications in accordance with the engineering standards. - Project execution, upkeep of records/manuals, scheduling jobs, spares/material/manpower management etc. - -

I have total 9 years experience as production/process operator in the petrochemical industries.

Sales and Operations Officer targeting Productivity and Organizational Development

Civil Engineering and Petroleum Engineering degree with various skills in Microsoft Excel Macro, HYSYS system and minimum drafting capability.

Worked oil rigs overseas, including Yemen,Venezuela, Ecuador, Cuba and Russia. Did oil rig servicing in Alberta. I am presently working and would like to take an overseas position.

Graduate Mining Engineer that speaks Spanish, English, German and French willing to work in the mining industry.

Supply Chain & e-Business Management professional having 9+ years multinational experience.

I have: . Master's Degree in Geology . 4 years research experience . 2 years teaching experience . An impressive career of field works including mapping . Efficiency in sampling of rock and soil from outdoors . Extensive training and experience in laboratory.

I'm petroleum engineer,graduated in 1995 from suez canal university , work in egypt in suez oil company as petroleum engineer.

Skills: Contract Negotiation, Quantity Surveying, Project Handling & Project Implementation, Quality Control, Co-ordination with various agencies involved in project

15 years experience of mechanical training in the middle east. This includes classroom, workshop, OJT, course design and writing and training course administration.

Industrial Electrician

OVERVIEW OF RESUME WITH Experience spanning over nine years, I have worked as HSE inspector, HSE engineer and HSE coordinator on major oil & gas projects within the oil industry .

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 [ 186 ] 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out