Resume - I am a mechanical technician I can do all rotary and stationary equipment jobs.

Misco Jobs

Resume #59581

CONTACT INFORMATION:
View contact information...

WORKING EXPERIENCE

* Presently working with TNB Liberty Power Plant (Malaysia) Mirpur Mathelo as a Permanent Mechanical Technician. 01-01-2004 to Till Date
* Two years apprenticeship training from Engro Chemical Pakistan Ltd Daharki.
* One Year apprenticeship training from TNB Liberty Power Plant MirPur Mathelo as a Mechanical Technician.
* Worked in Shutdowns and Turnarounds at FFBL (former FJFC) Karachi, ICI PPTA Plant Karachi, Engro Chemical Pakistan Ltd. Daharki as a Mechanical Technician.

JOBS PROFILE

GAS TURBINE:
Overhauling and troubleshooting of gas Turbines of GE.
Up rate of Frame-5 GE gas turbine from L to M.

STEAMTURBINE:
GE Steam turbine rotor replacement.

RECIPROCATING COMPRESSORS:
Worked on reciprocating compressors of Ingersoll-Rand and Cooper Bessemer.

CENTRFUGAL COMPRESSERS:
Overhauling of centrifugal compressors of Clark.

CENTRFUGAL PUMPS
Maintenance, overhauling and troubleshooting of KSB, Nice, Bingham and Gould pumps.

P.D PUMPS:
Maintenance and troubleshooting of reciprocating, diaphragm and screw type pumps.

GEAR BOXES:
Complete overhauling and troubleshooting of different types of gearboxes.

PSV'S:
Troubleshooting and calibration of Pilot operated, Conventional and below type PSVs.

BALANCING JOBS:
Static and Dynamic balancing of steam turbine rotors, impellers, pulleys and motor rotors at Schenck balancing machine.

QUALIFICATION
* D.A.E. (Mechanical) from Sindh Board of Technical Education Karachi in 1st Division
* Matriculation Science From Sukkur Board in 1st Division.

PERSONAL DATA
* Date of birth: 03-03-1983
* Marital status: Single
* Religion: Islam

TRAININGS AND CERTIFICATES

* First aid.
* Fire fighting.
* Rescue Training from FJFC Goth machi
* Heat Exchanger & Steam Trap from FJFC Goth machi
* Work permit procedure.
* Communication skills.
* ISO 9002 & 14001
* Safe management practice.
* Anti-friction Bearing by SKF expert.
* Awarded certificate of participation in achieving 10 million men hours without lost workday injury.

COMPUTER SKILLS:
* MAXIMO (Computerized maintenance management system)
* MP 2
* MS Office.
* LOTUS SmartSuite.

Hobbies:
* Books and newspapers.
* Cricket
Net-surfing

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8651 to 8700 of 15497)

Go to Search Parameters...

Brief Description

PRODUCTION PROFILE

my theoretical skills in drilling engineering is very nice.i can speak with english,kurdish and persion

E&I Supervisor or Tech

8 years experience in downstream logistics. Developed logistical planning for crude oil transportation via Caspian Sea to Black Sea ports, good communication skills. Demurrage claim settlements, reduced third party demurrage claims by $3 million during 4 years.

Currently a Cryogenic gas plant operator 3 yrs. Well Head compression experience 1yr. Associates Degree in Electronic Instrumentation and Control.

b.sc with first class and 2.8 years of experience in chemical/petrochem industry

Graduated from Geological Engineering, Faculty of Earth and Energy Technology, Trisakti University Jakarta in August 2008 with cumulative grade point average (GPA): 3.14 (scale from 0 to 4). My organization experience as membership of Gathering Student Board of Geology in Trisakti University

Competency in developing HSE Management system and conducting compliance audits, advising on HSE requirements & statutory compliance.

Marine engineer seastaff 15 years/eng superintendent 5 years/ operations manager 4 years/ technical manager 4 years

Great expierience and offshore back ground

Drafter, Designer, AutoCAD, Revit, CADD Manager, VB, VBA, AutoLisp, Access database, MS Office

Sr. Field Engineer, 20+ years, excellent customer service skills, electro-mechanical repair, maintenance

I'm a diploma holder in Chemical technology having 12 yrs of experience in petrochemical field worked as Junior Engineer in Ammonia synthesis plant of all sections of desulphurization, catalytic reforming,CO2 removal, synthesis reactor, refrigeration, ammonia storage with adequate HSE practices

I am a mechanical technician I can do all rotary and stationary equipment jobs.

my expertise are using any release of autocad, rhinoceros for 3d and GHS for stability calculation.

Reliable, hard working Geologist with experience in Environmental Consulting and Geophysical Investigations .

Degree and diploma in chemical engineering.

Experienced in developing and delivering drilling plans, including wellbore and casing design,mud program,cementing program, directional plan, completion design, leading risk assessments, developing safety programs for workover, drilling and completion operations on exploration and development wells

Seeking a challenging career position where my technical skills, talents can be effectively utilized by a company offering long-term opportunities for professional growth in recognition of dedication, drive and superior performance.

I have been in Customer service Line since 10 years. I have experince towards handling customers and solving the inquiries as well. Further more my qualification are until SPM but the working experince towards this line giving me a lot of opportunity to built up my career.

Have worked 9 years in mining industry. during this period i worked as dumptruck operator, l.h.d operator, jumbo operator, shift coordinator and drill master. what i like and enjoy of my work is the challenge of keeping my-self,

I am a Journeyman licensed plumber with electrical certification(NC) I have OSHA competent person training for heavy equipment and excavation. I am gas tite certified and a good mechanical skil set.

I Started at Newmont Gold Company In 1996 as a miner trainee, within one year I was promoted to miner 3. I also worked for Stillwater mining corporation in Montana where I was a lead miner in charge of 15 miners and two levels of the mine.

Young energetic hard working safety conscious person with good experience in comissioning training and optimization of a gold treatment plant

Underground Mining, Roof Support team.

Holder of the diploma in safety and health and certified in indsutrial hygiene management, holder of the NEBOSH certifcate in OSH

Self-motivated with experience in field of instruments, process, oil&gas valve and actuator control system. Knowledge, understanding and interesting in variety of control systems such as DCS, PLC, SCADA, and MARK series.

Microstation, AutoCad, Electrical Utility as well as Residential/Commercial, Pipeline Drafting and GIS

Safety Trainer seeking entry level position with Safety minded company.

Mechanical engineer with 13 month experince in production

I studied B.E.,in Instrumentation and control Engineering with 75% and First class with Distinction

Registered Nurse with one year working experience in different special areas like ICU,EMERGENCY DEPARTMENT,RECOVERY ROOM,SURGICAL AND MEDICAL WARD

Seeking a position in Project Management to utilize my Practical & Theoretical knowledge as well as technical skills so as to serve the firm for long time, which enables my professional growth. To work efficiently and honestly for the betterment of the organization and personal development .

7 Years of experience in Installiation,Testing & Commissioning of Electrical Equipments in the field of Power Stations,Petrochemical Plant etc

I am a red seal electrician with 7 years exp. I have worked sinking shaft & development.

civil formwork

B.Tech., Diploma., Civil engineering

I have worked as a drilling supervisor for 5 years and at the moment for 1.5 year work as a completion and drilling material specialist for national iranian oil company. I am ready to relocate internationally regarding to job situation.

Mechanical Design Engineer for Oil and Gas with 10 yrs exp. for EPC companies

Paint Inspector/Supervisor

Electrical and instrument project manager construction, design and inspection

Open Hole LWD Logging and log analysis, M.Tech (Applied Geology)

My most recent experience was repair and maintenance on board a Tanker vessel, Livestock and Reefer Ship. I was responsible for all the hot work and repair, including the use of Manual lathe machine

Overhauling of Rotating equipments e.g pumps, compressors, gas turbines etc. in an oilfield

Presently working with ConocoPhillips Syria Dez.Gas Ltd. since April 2002 as a Senior Warehouse & Procurement Supervisor in Syria (Middle East) on 28 Days ON/OFF schedules through GMOS (MSI). Job Profile: Responsible overall for all aspects of materials including warehousing, procurement operations

Working In the Oil and Gas Drilling Industry Since 1986 Looking for a company that wants its employers to look after it !!

Rotating Equipment Mechanical Engineer

Civil Engineering,Construction Manag., Geotechnical, structure, Design of steel towers

Senior Geologist (16+ years oil and gas experience), graduated in geology from University of Kansas in 1987.

I am currently working in a Water Utility Company as a Project Development Manager with exposure in designing pipe network, supervision of pipelaying works, and pipe maintenance, handles customer service operation, and Customer and Billing computerization project.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 [ 174 ] 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out