Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #6020 next resume »»
CONTACT INFORMATION:
View contact information...

Nationality Iranian
D.O.B 1963
Place Of Birth Iran
Marital Status Married

University Degree

BS in Electrical Engineering, Tehran University, Tehran / Iran, 1990

Working Experience

From March 2003 up to now, Kherad Sanaat Co., As senior Electrical engineer, engineering Dept

Design & procurement for sea water inlet & cooling water system of Mobin Petrochemical Complex
-Load flow & short circuit study using ETAP software
-Preparation of specifications and data sheets for MV & LV panels, transformers, power & control cables
- Preparation of civil guide for substation
- preparation of cable list using ETAP software

Revamping of fume collection system of Khuzestan Steel CO.
-Design of LV & MV MCC's
-Preparation of specification for electrical panels
-Tendering for supply of electrical panels
-Preparation of cable list
-Motor start & transient analysis using ETAP software

From March 2002 to March 2003 Naftkav Engineering & Services Co., as electrical engineer

Salman Offshore Oil & Gas Field Development Project

- Design review of conceptual study and basic design documents prepared by KVAERNER Co.
- Design review of EPC tender documents for offshore platforms and onshore facilities
- Design review of basic design documents prepared by ABB LUMUS Co.

From Sep.1999 to March 2002 ( Beginning overlap with working for IRITEC)-Behin Sanaat Engineering Co., First as electrical engineer and later as engineering design manager

- Preparation of procedures for ISO 9001 certification
- Design of 20 KV transmission lines
- Preparation of technical & financial proposal for EPC tenders

Commissioning of Shoeibieh 100,000 TPY cane sugar factory including:

- Preparation of test procedures & test forms for electrical equipments includind 33 KV &
6.6 KV substations, MV & LV motors, MCC's, Earthing, Lighting, Cables, etc
- Supervision on precommissioning & commissioning tests of electrical equipments
- Supervision on pant commissioning
- Testing & setting protection relays for SWGR's and MV motors
- Preparation of technical & financial proposals

From Aug.1995 to Jan.2000 – IRITEC Co., As electrical designer

-Electrical design for upgrading reduction plant No.2 of Ahwaz Steel complex from 1,600,000 TPY to 2,200,000 TPY including: cabling, earthing, lighting, MCC's, control & protection for distribution transformers, capacitor banks, supervision on erection and installation of a.m. items & also 6.6 KV, 2200 KW motors, testing and setting of microprocessor based relays for a.m. motors

-Design review & supervision on erection & installation & commissioning of electrical equipments of 160 ton ladle furnace for Ahwaz Steel complex including: 26 MVA 33/0.2-0.5 KV ladle furnace transformer

-Design of control circuit for chemicals injection to cooling towers of reduction plant No.2 of Ahwaz Steel Complex

-Design & erection & commissioning of electrical equipments of stand F7 of hot rolling mill of
Mobaarakeh Steel Complex including: Control & protection of 63 KV feeder, cabling, earthing, MCC's

From Jun.1994 to jun.1995 – Ghodsniroo Consultants, as electrical supervisor

-Supervision on erection & installation of electrical equipments in Ramin thermal power plant

From Oct.1993 to May 1994 – Iran National Steel Idustrial Group, as project engineer

-Design and supervision on erection of electrical network of pipemill workshops including: Design of distribution transformers, design of transformer rooms, LV panels

From Aug.1991 to Oct.1993 – Zarvir Engineering Consultation, as electrical supervisor

Supervision on erection & installation & commissioning electrical equipments of pelletizing plant No.2 in Ahwaz Steel Complex including: 6.6 KV switchgear, MV & LV electromotors, MCC's, earthing, lighting, LV & MV cabling (190 Km)

From Aug.1990 to Aug.1991 – Kavian Steel Co., as commissioning engineer

Working with Siemens specialists in commissioning electrical equipments including: DC drivers for roller tables, compressor room, lever type ejector, piling device

Abilities

Fluent in English
Computer literacy (Windows, EXCEL, WORD, Internet )

View contact information...
«« previous resume next resume »»
Search Results (Resumes 6301 to 6350 of 15507)Go to Search Parameters...
Brief Description
Electronic integrated controls, PLC control, installation repair and preventative maintenance
Qualified Diesel Mechanic specializing in Hydraulics. I have 27 years experience in mining. A self starter who needs the minimum supervision.
Result oriented Chemical Engineering Professional with a Post graduation in Management offering extensive experience of over 14 years in the Commercial and Government Market place. A broad experience base, with a proven record of success in Industrial projects
Seeking an Interesting and challenging position in Safety
I would like to apply for Workover Supervisor or Completion Supervisor-Technician position in Asia or Middle East region.
35 years experience in contract mining in Pacific Rim Countries. General Manager of New Zealand's largest Contract miner.
Drilling Fluids Cementing Logistics Marketing Management
Over 20 years with Department of Energy contractor experience with environmental management, remediation, regulatory compliance, pollution prevention, quality assurance and project management/ technical support experience. Excellent written and oral skill level.
i have a vast experience in mining industry of about 22 years. I have 3 years of abroad experience in Kenya and Uganda
I have worked in the oil and gas industry for over 25 years. I have managed a drilling rig, drilled, supervised,ran core jobs, PDC Bits supervision and much more. I have all my saftey tickest and much much more.
Objective A challenging position with the opportunity for advancement in the field of Logistics, Warehousing and Distribution, utilizing extensive, practical skills and training gathered over 25 years experience in a logistics-based background.
Cost Engineer
I am a qualified Mechanical Fitter and Turner with twenty years extensive experience. I am booked to complete an Offshore Survival & Fire Fighting Course from 16 Aug until 20 Aug 2004.
Im presently building 2 land rigs for Arabian Drilling company, and have been employed by ADC for 7 years,as a senior chief mechanic. I am trying to get involved in a more technically advanced environment. I would be prepared to come and do a trail period on my days off.
I am an electrical engineer, I have 14 years experience in industrial projects mainly in steel industry and oil & gas industries, I have gained valuable experience in design, procurement and construction of electrical systems, I am familiar with MS office and electrical analysis software Etap.
I am a multi field Estimator, Designer and Project manager, Electrical and Mechanical is my best fields, working knowledge of structural steel, concrete, IT and plumbing. I have designed and installed Power Distribution and generator systems. Safety and code compliance is a must.
Training/HR Professional, Vocational Assessor experienced in Performance Consultancy, Development, Recruitment, Objective/Competence Based Training Systems and Certification within Oil/Gas, Nuclear, Defense and Railway Industries, Training and Development in Multi-cultural Environments.
Piping supervisor. on & offshore construction/maintenance
27 yrs mining experience, 20 underground, 7 open pit experience in all phases of underground mining. operated haul pak and blast hole drills and front end loaders in pits.
14 years experience in Electrical Controls/Instrumentation field. PLC programming, Variable frequency drives, AutoCad, Electrical Codes, Industrial networks ProfiBus, DH+, DeviceNet
I am an electrical engineer, I have 14 years experience in industrial projects, I am looking for a job in United Arab Emirates.
24 years overall experince in records management in engineering industries. exposure in setting up document control centre, training to staff, document management from generation of document list to archives, final documentation. can handle software like inforworks/ documentum etc..
I have over twenty five years experience in technical (mine surveying) discipline. I have worked in very busy offices and have experience in multitasking. I am friendly, punctual, honest, good at working with others, can work under pressure, hardworking and I have a professional manner.
Senior Executive with forty three years of experience in the mining industry
Dear Sirs I live and work in Belgrade, Serbia and Montenegro (ex Yugoslavia). Trying to find employment abroad I am addressing you believing that you will take my application in consideration and judge my profile, qualification and working experience.
A Chemical Engineer with outstanding professional experience of more than 30 years in the manufacturing / Projects/Process engineering and HSE management in Petrochemical / Chemical/Fertilizer plants /Offsite and terminal complex.
I am currently seeking employment internationally preferably on a rotational basis
27 years experience in integration of controls, electrical construction and service. Management and installations of electrical systems including but not limited to: industrial & commercial installations, networking including fibre, power quality mediation, controls, S.C.A.D.A., …
To obtain a position with a respected, safety oriented company, where I would be challenged and able to use my knowledge and training in the HSE, management and enforcement fields, to help create and/or maintain a safe working environment for all its employees.
Resume
13 yrs AWS CWI QA & QC inspection & management, industrial construction in major plant expansions & combined cycle power plants.
Started as Drilling Engineer. Project management expertise. Contract document prep & specs. Procurement of products/services/consultancy ,management of contractors/suppliers. Responsible for commercial, logistical, technical performance of jobs. Tendering, contract negotiations. Budgets up to £10m.
I'm a Senior CSWIP 3.2 and Radiographic Interpreter 3.4 holder. Having more than Twenty years of experienced in Oil & Gas construction and Inspection work, both Structural or Piping in Onshore and Offshore. Familiarized with various Welding Processes and relevant Code & Standard.
A DIPLOMA IN MECHANICAL ENGINEER HAVING 20 YEARS EXPERIENCE IN CONSTRUCTION FOR VARIOUS INDUSTRIES LIKE CROSS COUNTRY PIPELINE, CEMENT, CHEMICAL, FERTILISER, POWER, ETC., PRESENTLY FOR THE PAST 7 YEARS WORKING AS A DY. MANAGER (CONSTRUCTION) WITH SIMON INDIA LIMITED, INDIA.
20 years experience in the industry and PDMS user since 1997. Extensive experience in PDMS 3D Design and 2D Draft producing engineering and fabrication drawings for a wide range of projects in the following countries: France, USA, Norway, Holland and UK. Experience in AutoCAD and Microstation.
29 plus years in the oil and gas production. All phases in the operation of oil and gas production platforms. Design, build, install and trouble shoot pneumatic and hyfraulic safety and control systems.
State Diploma of Geometer Studies in engineering State Doctorate of Political Sciences - Option " International "
Truck driver
As a fully qualified Mining Engineer i am looking to offer my skills to earth resource projects.
Played as a Coordinator / senior to executed various turnkey EPC Projects incl HVAC system Rich Experience in the Project Management and coordinate to finalise Basic Design, Basic Engineering, Detailed Engineering with Process Engg.
Date of Birth 19 Octobre 1951 Nationality British/Turkish (double nationality) Current Position Beicip Franlab Associate Reservoir Management Consultant
I am applying for overseas MINING appointments
I am at present a Tool Pusher in Chad. IWCF Surface BOP Stack ; Current through 3/06 H2S Alive Certificate, Saudi Arabia Exxon Leadership Safety Training Workshop Eddie Bauer Problem Solving Certificate S.C.R. Rosehill Prodico Certificate
Twenty years experience in global recruitment of oil & gas people: sound knowledge of engineering skills required for design, fabrication, construction, commissioning of FPSOs, LNG trains, offshore platforms, petrochemical plants and refineries.
Maintenance Supervisor/ Superintendent
To join an organization where management skills and experience can be exercised to provide leadership in the areas of design, construction and plant maintenance utilizing my training and 25 years of experience to improve the firm's long term viability as a successful business concern.
June 2003 ©¦EPresent Company: JGC Corp Location: China Position : Schedule Controller May 2002 ¨C March 2003 Company: FAFCO Location: Saudi Arabia Position : Planning & Scheduling Engineer
maintenance electrician moving to Alberta Canada requiring career opportunities
Senior Piping Designer
Objective: To obtain a management or Business Development position with a Service Company in the Oil Industry that will allow me to implement my engineering and management knowledge in Completions and Production
First   Prev   101   102   103   104   105   106   107   108   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   125   126   [ 127 ]   128   129   130   131   132   133   134   135   136   137   138   139   140   141   142   143   144   145   146   147   148   149   150   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com