Resume - Over 20 years with Department of Energy contractor experience with environmental...

Misco Jobs

Resume #6148

CONTACT INFORMATION:
View contact information...

WSMS
[Contractor to Department of Energy at the Waste Isolation Pilot Plant (WIPP)]
Carlsbad, NM present

Senior Environmental Engineer
* Project Lead for WIPP Hazardous Waste Facility Permit (HWFP) site implementation of hazardous waste permit
* Strategic goals/objectives to implement operational activities
* Evaluate adequacy of effectiveness of permit performance
* Aid in research project permit compliance in underground
* Oversight of well drilling & well plugging & abandonment to ensure environmental compliance with applicable state & federal requirements
* Interpretation of HWFP and RCRA requirements for WIPP site
* Project Lead for NEPA requirements at the WIPP
* NMED/EPA compliance requirements integration at WIPP
* Environmental compliance assessments and walkdowns of all permitted and non-permitted areas (air, water, radioactive, and hazardous waste)

S.M. Stoller
(Contractor to Department of Energy at the Waste Isolation Pilot Plant)
Carlsbad, NM 12-00-1-03
Quality Assurance NQA-1 Certified Lead Auditor
* Audit technical aspects for waste acceptance certification at the WIPP
* Peer Review 40 CFR * 194.22 (NUREG 1297 compliance guidelines)
* Audit NQA-1 work processes
* ISO 14001 Certified
* Trend analysis for deficiencies tracking
* Conduct of Operations audits
* Developed procedures, plans for QA functions & responsibilities
* Wrote QAP for DOE WIPP site
* Developed matrices for sites procedures, programmatic requirements of NQA-1 and DOE requirements
* Review contract modifications to meet regulatory requirements
* Audit aspects related to compliance with State/federal/local environmental regulations

Fluor Fernald (formerly FERMCO) June 1993 to July 2000
Cincinnati, OH (Fernald Project)
Tech/Program Specialist III
* Regulatory compliance liaison for Fluor Fernald Legal Counsel
* Identify sampling requirements, characterize mixed wastes, low level wastes & disposal criteria for On Site Disposal Facility waste acceptance criteria
* Evaluate/characterize wastes for D&D from process areas and laboratory
* Reclassifying Hazardous Waste Management Units determinations for OEPA/DOE
* Review new environmental regulations for site applicability and implement as required
* Evaluate new DOE Order 435.1 for Waste Management
* Developed safety self-assessment procedure requirements for FEMP projects
* Wrote Root Causal Reportable Accident Annual Report for 1999
* Conduct of Operations & Operational Readiness Review member
* Develop program for "Behavior Based Safety" at FEMP
* Reevaluate DOE product classifications to determine RCRA status if change in product classification to waste
* Interpret/review DOT requirements for transport of hazardous/radioactive materials
* Pollution prevention assessments (PPA), environmental assessments (EA), NEPA, categorical exclusions, environmental impact statements (EIS)
* Baseline determination/assessment - up front planning (TQM, teams, organizational)
* Emergency Planning & Right-to-Know Act (EPCRA) notification, reporting, strategy & policy
* RCRA/CERCLA integration issues site-wide
* Interpretation of Federal/State Regulatory Policy issues as applies (RCRA, CERCLA, LLRW)
* Interpretative issues of hazardous waste pertaining to day to day work practices, disposal, transport, minimization, recycling issues, SW846 sampling protocol
* Audits, Surveillances, Operational Readiness Reviews, regulatory inspections of SAAs, HWMUs, Lab, & construction areas

Bartech Technical Services October 1990 - June 1993
Subcontractor to Fluor Daniel Fernald Environmental Engineer (Fernald Project)
Cincinnati, OH

* Review waste stream characterization/determinations for disposal options
* Review waste characterization sections in RCRA Part B and develop RCRA/CERCLA integration strategy for waste characterization
* Develop Regulatory Compliance Guides (RCG) as needed for hazardous waste
* Assist Laboratory in meeting regulatory compliance for generated hazardous waste, mixed, & LLRW
* Audit RCRA Annual Report to ensure compliance
* Correspondence with OEPA on regulatory issues as needed
* Engineering support services for disposal of low level radioactive waste and mixed waste streams
* Waste generation to disposal flow diagrams
* Regulatory compliance surveillance concerning low level radioactive waste/mixed waste management, handling and storage requirements
* Generator support to maintain regulatory compliance of waste
* Recycling effort support for waste/waste minimization/waste reduction
* Project Engineer for low level/mixed waste stream disposal from characterization to method of disposal

ERA, Inc. May 1989 - October 1990
Subcontractor to Environmental Engineer (Fernald Project)
Westinghouse Environmental Management Company of Ohio (WEMCO)
Cincinnati, OH

* Develop sampling and closure plans for Hazardous Waste Management Units (HWMU)
* Develop programs for low level radioactive and hazardous waste disposal, segregation, characterization and minimization management
* Responsible for waste management program meeting regulatory low level radioactive (NTS-NVO-325) disposal permit requirements
* Coordinated/Responded to FMPC/NTS audit of waste and characterization programs
* Develop/set-up non-contaminated radioactive and mixed waste segregation program
* Updated FMPC Waste Disposal Permit for NTS/NVO-325

Westinghouse Materials Company of Ohio April 1984 - May 1989
Cincinnati, OH Waste Technologist (Fernald Project)

* Developed/wrote FMPC Waste Disposal Permit for NTS meeting NVO-325 requirements
* Coordinated FMPC/NTS audit of waste programs
* Project coordination and responsibility for disposal, storage, transport and segregation techniques for radioactive, non-radioactive and hazardous waste sources
* Working knowledge of state and federal levels for environmental compliance and transport regulations (RCRA, TSCA, CERCLA, SARA)
* Developed and wrote procedures for radioactive, hazardous, mixed and non-radioactive wastes
* Developed and conducted training sessions for waste, health and safety (OSHA) areas
* Developed annual training, qualification history, and certification reviews
* AutoCAD drafting and design for engineering applications and technical illustrations

Excellent Computer skills:
MS Word, MS Excel, & Corel (MS Access, AutoCAD)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6301 to 6350 of 15497)

Go to Search Parameters...

Brief Description

Result oriented Chemical Engineering Professional with a Post graduation in Management offering extensive experience of over 14 years in the Commercial and Government Market place. A broad experience base, with a proven record of success in Industrial projects

Seeking an Interesting and challenging position in Safety

I would like to apply for Workover Supervisor or Completion Supervisor-Technician position in Asia or Middle East region.

35 years experience in contract mining in Pacific Rim Countries. General Manager of New Zealand's largest Contract miner.

Drilling Fluids Cementing Logistics Marketing Management

Over 20 years with Department of Energy contractor experience with environmental management, remediation, regulatory compliance, pollution prevention, quality assurance and project management/ technical support experience. Excellent written and oral skill level.

i have a vast experience in mining industry of about 22 years. I have 3 years of abroad experience in Kenya and Uganda

I have worked in the oil and gas industry for over 25 years. I have managed a drilling rig, drilled, supervised,ran core jobs, PDC Bits supervision and much more. I have all my saftey tickest and much much more.

Objective A challenging position with the opportunity for advancement in the field of Logistics, Warehousing and Distribution, utilizing extensive, practical skills and training gathered over 25 years experience in a logistics-based background.

Cost Engineer

I am a qualified Mechanical Fitter and Turner with twenty years extensive experience. I am booked to complete an Offshore Survival & Fire Fighting Course from 16 Aug until 20 Aug 2004.

Im presently building 2 land rigs for Arabian Drilling company, and have been employed by ADC for 7 years,as a senior chief mechanic. I am trying to get involved in a more technically advanced environment. I would be prepared to come and do a trail period on my days off.

I am an electrical engineer, I have 14 years experience in industrial projects mainly in steel industry and oil & gas industries, I have gained valuable experience in design, procurement and construction of electrical systems, I am familiar with MS office and electrical analysis software Etap.

I am a multi field Estimator, Designer and Project manager, Electrical and Mechanical is my best fields, working knowledge of structural steel, concrete, IT and plumbing. I have designed and installed Power Distribution and generator systems. Safety and code compliance is a must.

Training/HR Professional, Vocational Assessor experienced in Performance Consultancy, Development, Recruitment, Objective/Competence Based Training Systems and Certification within Oil/Gas, Nuclear, Defense and Railway Industries, Training and Development in Multi-cultural Environments.

Piping supervisor. on & offshore construction/maintenance

27 yrs mining experience, 20 underground, 7 open pit experience in all phases of underground mining. operated haul pak and blast hole drills and front end loaders in pits.

14 years experience in Electrical Controls/Instrumentation field. PLC programming, Variable frequency drives, AutoCad, Electrical Codes, Industrial networks ProfiBus, DH+, DeviceNet

I am an electrical engineer, I have 14 years experience in industrial projects, I am looking for a job in United Arab Emirates.

24 years overall experince in records management in engineering industries. exposure in setting up document control centre, training to staff, document management from generation of document list to archives, final documentation. can handle software like inforworks/ documentum etc..

I have over twenty five years experience in technical (mine surveying) discipline. I have worked in very busy offices and have experience in multitasking. I am friendly, punctual, honest, good at working with others, can work under pressure, hardworking and I have a professional manner.

Senior Executive with forty three years of experience in the mining industry

Dear Sirs I live and work in Belgrade, Serbia and Montenegro (ex Yugoslavia). Trying to find employment abroad I am addressing you believing that you will take my application in consideration and judge my profile, qualification and working experience.

A Chemical Engineer with outstanding professional experience of more than 30 years in the manufacturing / Projects/Process engineering and HSE management in Petrochemical / Chemical/Fertilizer plants /Offsite and terminal complex.

I am currently seeking employment internationally preferably on a rotational basis

27 years experience in integration of controls, electrical construction and service. Management and installations of electrical systems including but not limited to: industrial & commercial installations, networking including fibre, power quality mediation, controls, S.C.A.D.A., …

To obtain a position with a respected, safety oriented company, where I would be challenged and able to use my knowledge and training in the HSE, management and enforcement fields, to help create and/or maintain a safe working environment for all its employees.

Resume

13 yrs AWS CWI QA & QC inspection & management, industrial construction in major plant expansions & combined cycle power plants.

Started as Drilling Engineer. Project management expertise. Contract document prep & specs. Procurement of products/services/consultancy ,management of contractors/suppliers. Responsible for commercial, logistical, technical performance of jobs. Tendering, contract negotiations. Budgets up to £10m.

I'm a Senior CSWIP 3.2 and Radiographic Interpreter 3.4 holder. Having more than Twenty years of experienced in Oil & Gas construction and Inspection work, both Structural or Piping in Onshore and Offshore. Familiarized with various Welding Processes and relevant Code & Standard.

A DIPLOMA IN MECHANICAL ENGINEER HAVING 20 YEARS EXPERIENCE IN CONSTRUCTION FOR VARIOUS INDUSTRIES LIKE CROSS COUNTRY PIPELINE, CEMENT, CHEMICAL, FERTILISER, POWER, ETC., PRESENTLY FOR THE PAST 7 YEARS WORKING AS A DY. MANAGER (CONSTRUCTION) WITH SIMON INDIA LIMITED, INDIA.

20 years experience in the industry and PDMS user since 1997. Extensive experience in PDMS 3D Design and 2D Draft producing engineering and fabrication drawings for a wide range of projects in the following countries: France, USA, Norway, Holland and UK. Experience in AutoCAD and Microstation.

29 plus years in the oil and gas production. All phases in the operation of oil and gas production platforms. Design, build, install and trouble shoot pneumatic and hyfraulic safety and control systems.

State Diploma of Geometer Studies in engineering State Doctorate of Political Sciences - Option " International "

Truck driver

As a fully qualified Mining Engineer i am looking to offer my skills to earth resource projects.

Played as a Coordinator / senior to executed various turnkey EPC Projects incl HVAC system Rich Experience in the Project Management and coordinate to finalise Basic Design, Basic Engineering, Detailed Engineering with Process Engg.

Date of Birth 19 Octobre 1951 Nationality British/Turkish (double nationality) Current Position Beicip Franlab Associate Reservoir Management Consultant

I am applying for overseas MINING appointments

I am at present a Tool Pusher in Chad. IWCF Surface BOP Stack ; Current through 3/06 H2S Alive Certificate, Saudi Arabia Exxon Leadership Safety Training Workshop Eddie Bauer Problem Solving Certificate S.C.R. Rosehill Prodico Certificate

Twenty years experience in global recruitment of oil & gas people: sound knowledge of engineering skills required for design, fabrication, construction, commissioning of FPSOs, LNG trains, offshore platforms, petrochemical plants and refineries.

Maintenance Supervisor/ Superintendent

To join an organization where management skills and experience can be exercised to provide leadership in the areas of design, construction and plant maintenance utilizing my training and 25 years of experience to improve the firm's long term viability as a successful business concern.

June 2003 ©¦EPresent Company: JGC Corp Location: China Position : Schedule Controller May 2002 ¨C March 2003 Company: FAFCO Location: Saudi Arabia Position : Planning & Scheduling Engineer

maintenance electrician moving to Alberta Canada requiring career opportunities

Senior Piping Designer

Objective: To obtain a management or Business Development position with a Service Company in the Oil Industry that will allow me to implement my engineering and management knowledge in Completions and Production

An experience hands-on Marine Superintendent with a reputation of working around problems to get the job done. Has a broad marine background spanning 25 years of oil tanker/terminal and offshore marine operations, including the commercial aspects of the same.

Drilling Supervision, Service Company Management.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 [ 127 ] 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out