Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #6157
next resume »»
CONTACT INFORMATION:
View contact information...
EXPERTISE
* Contaminated Site Investigation
* Environmental Assessment, Monitoring and Remediation
* Waste Disposal Assessment and Impact
* Transport and Fate of Chemicals in the Environment
* Preliminary Quantitative Risk Assessment and Screening Level Risk Assessment
* Groundwater, Surface Water, Soil and Sediment Sampling and Analysis
* Scientific and Technical Report Preparation, Review and Presentation
WORK EXPERIENCE
* Project Scientist, Franz Environmental, Ottawa, ON (Jan. 2006 - Present)
* Environmental Scientist, Jacques Whitford Limited, Ottawa, ON (May 2005 - Dec. 2005)
* Postdoctoral Fellow, Dept. of Earth Sciences, Univ. of Ottawa, ON (Nov. 2001 - March 2005)
* Project Scientist, Dept. of Earth Sciences, Univ. of Western Ontario, ON (Sept. - Nov. 1999)
* Graduate Scientist, Indian Institute of Technology (IIT), Kharagpur, India (Jan. 1998 -Sept. 2001)
* Graduate Scientist, Indian Institute of Technology (IIT), Kanpur, India (July 1996 - Dec. 1997)
SELECTED PROJECTS
Risk Assessment and Contaminated Site Classification
* Project Scientist for a DND project on CCME National Classification System (NCS) scoring, evaluation and re-classification of contaminated Mid-Canada Radar sites in northern Canada. The work was completed in support of request for funding under FCSAAP (2006).
* Project Scientist for three PQRAs prepared for DCC/DND sites in Eastern Ontario. Activities included modelling using the Health Canada Guidance, data analysis and report writing (2006).
* Project Scientist for the Human Health and Ecological Risk Assessment of a Transport Canada Park and Ride facility in Ottawa. Activities included chemical data screening, statistical analysis and preparation of data for risk assessment (2006).
* Project Scientist for the Human Health and Ecological Risk Assessment of Lyons Creek and Coyle Yard in the Well and Area, Ontario for a PWGSC project. Activities included chemical data screening, statistical analysis and preparation of data for risk assessment (2006).
* Project Scientist for the development of a technical bulletin for Ontario Ministry of Environment on Petroleum Hydrocarbons in the Subsurface (2006).
* Environmental Scientist for Radiological Risk Assessment in the Gatineau Park Residential Properties for the National Capital Commission and the Minto Developments Inc., Ottawa. Activities included chemical data screening, statistical analysis and helping with the preparation of the risk assessment report (2005).
Trace and Heavy Metal Biogeochemistry
* Post-doctoral Scientist for an environmental research project on the potential for geochemical and microbial remobilization of arsenic from sediments and porewater in Yellowknife Bay, Great Slave Lake, NWT" (2003-2004).
* Post-doctoral Scientist for several research projects on environmental biogeochemical studies of sediments and porewater, lakes and mine tailings in Northern Ontario and Quebec (2002-2004).
* Post-doctoral Scientist for a research project on the potential for methylation of mercury in base metal mine tailings (2003-2004).
Contaminated Site Investigations and Environmental Assessment
* Senior Geoscientist and Field Team Leader for an INAC consulting project on sediment quality investigation and arsenic remobilization in the Baker Creek, Giant Mine, Yellowknife, NWT (2005).
* Conducted several Phase II ESAs to assess potential areas of environmental concerns, including supervision of borehole drilling, monitoring well installation, and test pitting in Ontario (2005).
* Supervised and conducted subsurface investigations and groundwater monitoring and sampling at industrial, commercial and residential properties in Ontario and Quebec (2005).
* Supervised the installation of various groundwater-monitoring wells to determine direction of migrating contaminants and their effect on downstream surface water (2005).
* Investigated arsenic levels in the sediments and water in a river receiving mine drainage and effluent discharge from several coal mines located in the Central Coalfields, Bihar, India (2000).
Soil and Groundwater Remediation
* Project Scientist for remedial investigation at a major railway yard in eastern Ontario. Supervised test pitting and remedial testing. Conducted groundwater monitoring. Prepared a comprehensive final report with results.
* Field technologist for groundwater remediation using chemical oxidation at chlorinated volatile organic compounds (cVOC) impacted sites in Ottawa, Ontario.
* Environmental Technologist for remedial investigation at several crude oil spill locations in eastern Ontario. Supervised test pit excavations, overburden and rock drilling, and core evaluation. Conducted groundwater monitoring (2005).
* Field Technologist for the remediation/removal of petroleum hydrocarbon impacted soils from residential and commercial properties in Ontario and Quebec (2005).
* Field supervisor for removal of underground storage tanks (USTs) from residential and commercial properties in Ontario and Quebec (2005).
* Supervised and conducted soil cleanup operations at a several gas stations in Ontario. Soil and water sampling conducted and degree of remediation assessed (2005-2006).
Waste Disposal Assessment and Impacts
* Managed several research projects on environmental geochemical and biogeochemical studies in sulfide mine tailings, mining-impacted lake sediments and acid mine drainage in Northern Ontario, Quebec and NWT (2002-2004).
* Investigated topsoil, river sediment, surface and groundwater quality around a coal fly ash disposal site in Eastern India and delineated contaminated areas with spatial mapping (1998-2001).
* Monitored the surface water quality in a river receiving effluent from coal mines and thermal power plants in Eastern India (2000).
* Managed a research project on geochemical characterization of feed coal and its combustion by-product (fly ash) to determine their leachability and potential to contaminate the surface water and groundwater (1998-2001).
* Conducted detailed environmental assessment of topsoil and groundwater contamination around thermal power plants and their waste disposal sites in Eastern India (1998-2000).
* Investigated the geochemistry of ultrabasic rocks and the release of hexavalent chromium to the soil and groundwater around an open-cast chromite mines, Eastern India (1996-1997).
Environmental Sampling and Analysis
* Expert in designing and conducting environmental sampling of soil, sediments, groundwater, and surface water.
* Expert in soil and sediment coring, borehole drilling operations and monitoring well development for groundwater.
* Analysed groundwater for metals, major ions, petroleum hydrocarbons, VOCs, PAHs and BTEX.
* Experienced in field analysis of water quality parameters such as pH, Eh, DO, conductivity, salinity and turbidity.
* Analysed rocks and minerals with X-ray Diffractometer (XRD), Scanning Electron Microscope (SEM) with Energy Dispersive X-ray Analyzer (EDS), Polarizing Microscope and Electron Probe Microanalyser (EPMA), and X-ray Fluorescence Spectrometer (XRF).
* Analysed liquid samples (water, leachate, and effluent) with Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES) and Atomic Absorption Spectrometer (AAS).
* Experienced in the handling of laboratory instruments such as UV-Visible Spectrophotometer, Orion Water Quality Analyzer and HACH portable spectrophotometer.
* Analysed soil clay minerals by Differential Thermal Analysis (DTA), Clay Fraction Separation (Hydrometer Method) and Specific Surface Area using BET N2-Adsorption Technique.
* Analysed minerals and wastes materials for stable isotope composition using Inductively Coupled Plasma Mass Spectrometer (ICP-MS).
* Experienced in various laboratory procedures such as column and serial leaching, sequential extraction method, adsorption-desorption studies and bioavailability studies.
* Experienced in geomicrobiological laboratory procedures for the study of sulfur-, iron-, and arsenic-reducing bacteria.
TRAINING/COURSES
WHMIS, Laboratory and Biosafety, Radiation Safety, Fire Suppression, Phytoremediation and Project Management.
ACADEMIC BACKGROUND
* Doctorate of Philosophy – Environmental Geochemistry, IIT Kharagpur, India (2002)
* Master of Technology – Civil Engineering (Environmental), IIT Kanpur, India (1998)
* Master of Science – Applied Geology, IIT Roorkee, India (1996)
* Bachelor of Science – Geology (Hons.), Utkal University, India (1994)
AWARDS/ACHIEVEMENTS
* NSERC Visiting Fellowship in Canadian Government Laboratories, 2005.
* Environmental Careers Organization (ECO) Canada Internship, 2005.
* Institute Fellowship for graduate studies, IIT Kharagpur, India, 1998-2001.
* Ministry of Human Resources Scholarship for graduate studies, IIT Kanpur, India, 1996-1997.
REGISTRATIONS/ASSOCIATIONS
Member, Ontario Environment Industry Association (ONEIA)
Member, Ottawa Geotechnical Group (OGG)
Member, Canadian Land Reclamation Association (CLRA)
PUBLICATIONS/PRESENTATIONS
No. of published scientific papers: 8
No. of conference presentations/abstracts: 15
No. of technical reports: 30
REFERENCES
Available upon request
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 5101 to 5150 of 15325)
Go to Search Parameters...
Brief Description
Currently Sr. piping designer on Bentley 3d and piping design checker. Experienced in all areas of piping Including high temperature and high pressure piping systems, lined and jacketed pipe, stress analysis, p&id’s, specifications, process, utilities, sulfonation, pharmaceutical, pharmaceutical val
Procurement Professional with over 15 Years Oil and Gas Industry Experience whose Strengths and Skills Saved Millions of Dollars.
Corrosion /Pipeline engineer with 5 years experience
Instrumentation/control/Automation/PLC programming/Robot programming
piping engineer with 5 yrs exp. in piping detail engineering with pdms as a 3D piping software, and PDMS administrator
IT Support/ personnel
Total 5 years engineering experience and new graduate from managment school.
I'm an Electromechanical Engineer with 5 years of related experience within the UAE and GCC.
Technician Komatsu Heavy Duty Machinery
Drilling standard directional, horizontal, “S” (build and drop), and build and hold wells for Shell Petroleum, Saudi Aramco, Encana, ConocoPhillips, EOG, Petrobras, Agip, Mobil, Elf, Chevron etc., with MWD/LWD tools and mud motors.
Involved in Sales Support, System Design & Estimation, Tendering & Engineering Low Voltage / Low Current Systems, including Fire Alarm System, SMATV Systems, Intercom Systems, Security Systems, Automatic Gate Barriers / Swing Gates, etc,.
Marketing,Business Development & Application Specialist of Chromatographic instruments of Pharmaceutical industry.
Mechanical Engineer with over 15 years of technical business experience with emphasis in cost control projects.
Ability to manage multiple tasks in a pressured environment.
I am hvac engineer
12th standard,iti-electrical,1year -diploma-electrical,maitenance,comissioning-crane,mcc panel
slick line supervisor
Working as a Petrophysicist( Logging Opertaion and Interpretation) in RIL India from last 2 years.
An Industrial Engineer working for five years as a Document Controller. A fast learner and once awarded as best employee.
Detailed Engineering for Offshore Plant, Hysys Simulation, Pipe line sizing, safety Valve Sizing, Equipment Sizing
Petroleum geology, well log interpretation, data management, seismic interpretation.Also I am a quick learner, hard working and can handle stress and give you desired results within a deadline.
Senior IT Analyst / Engineer
05 Years experienced HSE Advsior with NEBOSH
11 years extensive experience in engineering and design of all piping system and the overall layout of a plant for both on- and off shore project in the field of oil, gas and petrochemical plants, including plot plan development, plant and piping layout study, equipment arrangement, 3D modeling,
Having over 4 years experience as QC Engineer in various oil & gas indusries like, petrochemical refinery, ship building, offshore wellhead platform construction etc. I have a good background welding & Having ASNT Level 2 in RT, UT, MT & PT
Water/wastewater treatment engineering study, design, modeling, operation optimization for municipalities,oil &gas, refinery,power and petrochemical plants.
Geologist with a very strong experience in most of the oil/gas drilling operations
- Highly educated professional (Ph.D. and M.Sc. in Environmental Geosciences) - Managed portfolio of several environmental projects (NSERC, DIAND, CIDA, ICEF) - Seven years of professional experience in characterization, assessment and monitoring of contaminated sites
3 years in Human resource, 8 years in administration, 3 years in public relation / cutomer service
Electrical Technician Electrical instructor
Qaulity Engineer, ISO 9001. ISO TS16949, Supplier Quality Engineer
Experience in a range of commodity types: VHMS, intrusion-related-, meso- & epithermal-Au and porphyry Cu-Au and Mo style deposits. (Australia, Turkey, Albania, Kyrgyzstan Saudi Arabia & Oman). Reviewed, designed, budgeted & implemented regional & mine-based exploration programmes
More than ten years experience involving in Basic Design & Detailed Engineering, Construction and commissioning in Oil & Gas field. Extensive experience in all phases of Instrumentation Engineering starting from Feasibility Study, Basic Engineering Design Data, Design & Detail Engineering, Construct
Quick learner, motivated and dedicated in getting the job done .
Tertiary qualification in Mineral Processing and Extractive Metallurgy, Good understanding in Met accounting, Good troubleshooting, strong analytical and conceptual thinking skills, Initiative, Team player and hands on the job training, Strong commitment to Training, Safety and the Environment
B.E., (Bachelor in Industrial Engineering from Indian Institution of Industrial Engineering),
B. Sc. Chemistry (Grade Good)
Applying Insulation and Sheet metal Cladding.
Business development specialist with Sales experience
As Storekeeper we serve as the sole staff member responsible for performing all record keeping, issuance, recieving of a large supply materials and responsible for a large function of the storerooms
1st class welder fitter i have six full years expierience in this field
Experience Surveyor
Senior design Engineer in CITEC engineering vaasa,finland
6 years experienced piping designer, PDS/PDMS & other computer-aid design
I am a coal technologist having MSc. with coal tech. and 3 year experience in coal preparation plant operarion and managment. I mainly worked on bath type and cyclone type heavy media coal preparation plants.
Civil engineering
Piping Stress Engineer: Have approx. 6.5 years of hands on experience in stress analysis of piping systems and piping design for Petrochemical, Fertilizer , Oil & Gas plants and Offshore platforms using software like CAESAR-II, Well conversant with CAESAR-II 4.5, 5.0 and 5.1 versions. Also, well con
Have nine years of experience, in surveying and site Co-Ordination in construction industry.
+12 yrs as pipe inspector.api,ds1 cat of insp of bha,drillpipe,drill collars.casing & tubing.Emi drillpipe,mpi handling tools and vti/drift of casing and tubing.UT wall thickness and shearwave check slip area
Civil engineer with surveying, mining, and GIS experience
First
Prev
101
102
[ 103 ]
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
Next
Last
Seach Parameters
Goto Advanced Search...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com