Resume - Hi I am an engineer with instrumentation as specility and also i have don 3 yea...

Misco Jobs

Resume #62919

CONTACT INFORMATION:
View contact information...

ELECTRICAL & INSTRUMENTATION ENGINEER

CARRIER OBJECTIVE

To be apart of successful team of individuals who thrive on challenges, Where in my skills and ability will enhance the company's success and there by my own growth, and to be an efficient professional. Have a strong inter personal and communication skill and a quick learner.

TECHNICAL QUALIFICATION

* B.E. in Instrumentation technology from Visveshwaraiah Technological University, Karnataka INDIA (4 Year regular course)

* Diploma in Electrical Engineering from Board of Technical Examination Bangalore, Karnataka India ( 3 year Regular course)

* Diploma in PLC Programming from DGE Ministry Of Labour Government Of India

WORK EXPERIENCE TOTAL 7 YEAR ( INCLUDING 2 YEAR IN GULF)

More than seven year of experience in various Electrical / Instrumentation & Telecom installation, Inspection, Quality control & coordination, supervision, Instrumentation and control, preparation of start-up,procedure,manual preparation in the Kingdom of Saudi Arabia and India

EXPERIENCE-NO: 1
Presently working at ACC Wadi Gulbarga as maintenance engineer (instrumentation).

EXPERIENCE-NO: 2

NAME OF THE COMPANY: SAUDIA ARAMCO / YANBU REFINERY

Name of the contractor: T.R.G. SPAIN

Project: DHT OF YANBU Refinery K.S.A

Designation: Q.C.(Instrumentation/elect)
Approved by saudia aramco period: 1 year (April 2005-APRIL 2006)

Nature of work:-
1.Coordination of all QC Inspection, scheduling the inspection activities pre-commissioning and commissioning according to the plans and Quality standards/procedure.
2.provide guidelines and instruction to the E&I team of Engineer to work according to the P&ID.
3.Inspection, supervision, erection of the process field instrument pre-commissioning according to the specified specification data sheet and P&ID.
4.Instuction, direction and guidelines to the calibration team to perform calibration of electronics and pneumatic instruments.
5.coordination with DCS vendor for making the logic of the plant.
6.Involved in the commissioning of the instruments and DCS, loop checking from field to the control room, signal checking of all
Instrument which is coming from DCS control room, group checking and its testing of instruments like pressure temperature, level flow transmitter, control valve and other visual instruments.
7.Involved in the QC inspection of the transformers, electrical substation, DCS,UPS, MCC's Bus-duct, panels, interior & exterior light, JBs, distribution trays, organizing calibration shop to carry out pre-installation calibration of instruments with proper test equipment having traceability of its accuracy coordinating
QC Department and client for day to day loop check, planning of pre-loop check, rectification of any loop having problem, training of technician to carry out effective loop check.

EXPERIENCE-NO: 2

NAME OF THE COMPANY: OIL & NATURAL GAS COMMISSION (O.N.G.C)

Name of the contractor: Sadhav offshore company andheri(W),Mumbai

Designation: Maintenance Engineer

Period: 2 year (from oct 2002 to oct 2004)

Nature of Work: -

1.Maintenance of telemetry and SCADA system and been worked on project temperature transmitter and Sensor (RTD) installation.
Have hand on experience of installation and calibration and trouble shooting of various transmitters viz, temperature(TT)pressure(PT)
differential pressure(DPT ),flow meter, totalizer. pneumatic controller,bordon's chart recorder of ROSEMOUNT smart series.

The SCADA system is divided into following three sections.

I - Telemetry and instrumentation section

1.Checking the status of RTU(remote telemetry unit).carrying out the preventive maintenance which involve at least following broad activities however the preventive maintenance shall cover all other activities which is not listed below but to make the RTU &
SCADA system fully operational with the help of test equipment and ensuring the RTU's proper grounding.
A.Checking and adjustment of power supply voltage
B.Checking digital input corresponding to the master unit
C.Checking analog input value with the help of test Equipment and ensuring proper RTU grounding.
2.Checking the TIJB for physical cable connection, checking status of zener barrier taking corrective /remedial action for proper function of telemetry system
3.Loop testing at TIJB towards field instrumentation side.
4.Checking the FJB for physical cable connection and taking corrective Action for the function of telemetry system.
5.Monitoring and checking status of following instruments(a set of instrument and in case of malfunctioning /nonfunctioning taking corrective action to make them operational (TT, PT, DPT, FT, SSV,
SSV, PS).
6.Checking status of PT (point/tubing and taking corrective action for monitoring proper previous value.)
7.Physical checking of solenoid valve for normal operation during remote well control testing and carry out corrective action incase of non functioning.
8. Calibration of TT, PT DFT, FT, DPT, pressure switches.

II- power system section

1.Measurement of voltages and charge current and taking corrective action for the optimum current level of solar panels.
2.checking the voltage across the SPV panel, charge controller and battery cell.
3.checking the status of the battery charger and charge controller measurement of voltage and current taking remedial action for the rectification /trouble shooting of module PCB.
4.checking voltage of battery/battery bank level and specific gravity of the electrolyte where ever required measurement of circuit voltage and charging current.
5.Checking status of TEG, checking voltage /load current checking output voltages of each module, checking air filter regulator and draining condensate, checking and adjusting fuel gas supply.

III-communication section
1.Checking of antenna structure, feed RG213 /RF cable of connection mounting accessories and rectification of problem for full function process platform.
2.Alignment of antenna/adjustment of RF signals for the optimum level with proper test equipment, for remote & process platform.
3.Preventive maintenance of Radio, checking of voltages and Tx/Rx level signal level &adjustment to optimum level through TTS remote.
4.Physical checking of Radio equipment (remote),checking power supply voltage of Radio, setting of power supply physical checking of Radio grounding, realignment of antenna (remote).

EXPERIENCE-NO:3

NAME OF THE COMPANY: AL-FAWASAL ELECTRICAL EST (K.S.A)

Designation: Electrical Engineer

Period: 1 YEAR (Feb 1997 to jan1998)

Nature of work: -
1.Review of electrical drawings & make the connections as Per circuit diagram such as the control wiring of motor Control center
(MCC), ATS, synchronizing panel, street Light panels etc.by using electrical switchgears like Contactors ranging from 5A to 400A
rated current and coil Voltage of 110/220/24 V ac/dc and relays such as O/L,U/V,O/V relays with N/O & N/C Contacts, timers like 24
hrs ON delay, Off delay. circuit breaker like MCB &MCCB Ranging from 63A AND 25A to 600A respectively ACB ranging from 800A to
4000A with shunt trip release Under voltage release, ELCB ranging from 0.3A to 30ma Leakage current
2.To make the connection for CT operated amp-meter Voltmeter,
Frequency meter, power factor meter energy Meter etc.
3.To make the copper buss bar as per the drawing by using Hydraulic bending machine & assembling of all equipment To make the panel.
4.To install and commission the panel at site& termination of the incoming cable by using the hydraulic crimpier.
5.Have Experience to handle the electrical switchgear of Following
MNc's Merlin gerin ),Telemechnique (France),Legrand (France),ELDON
(Spain),Omron (Japan),Siemens(Germany)

EXPERIENCE-NO: 4

NAME OF THE COMPANY: GYRO LAB (P) LTD MUMBAI-93

An Swiss collaborated company (landes&gyro) manufacturer of instrument transformer,I&3 phase meter testing benches, megger and various electrical testing equipments for various state electricity boards and L&T,ABB etc

Designation: production and Testing Engineer

Period: 3 Years (December1993-Jan1997)

Nature of work: -

production duties
1.Manpower co-ordination & control
2.To solve the technical and non technical problem evolved on different department viz moulding, fabrication assembling.
3.Looking after daily production.
4.Data entries of daily production.
5.Co-ordination with store, quality assurance dept,for continuous availability of material of different dept.
Testing duties
1.To carry out the testing at various stages.
2.Core testing before and after secondary winding is laid for
Ratio and Error test.
3.Moulded core of instrument transformer testing for Ratio& Error
HV test between cores and insulation test Between windings.
4.To carry out following final test before client inspection.
* Ratio & Error test * LV test * HV test * pressure test.
5.To prepare the test report.
6.Other than this to lead a team of technicians for the Erection and commissioning of instrument transformer at client's site.
7.Testing of meter testing benches repair &trouble shooting Of various testing Equipments &meters.

QUALIFICATION IN INFORMATION TECHNOLOGY

* C & C++ Programming languages
Microprocessor (8085/86) and Microcontroller (8051 /pic) programming
* Diploma with Grade A+ in Hardware And Networking Engineering From Accel IT Academy LCC Hyderabad.
Windows NT-4.0/5.0 Server
Windows NT-4.0 Workstation
Windows 2000 Professional
* Diploma In Programming From L.C.C Hyd In Following
Oracle 9i
Visual Basic 6.0

PERSONAL INFORMATION
* Date of birth: June 21, 1974
* Nationality: Indian
* Passport no: E-5471333
* Passport Validity: 22/07/2013 years
Place Of Issue: Bangalore place:

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6451 to 6500 of 15509)

Go to Search Parameters...

Brief Description

Instrumentation technician with nine years experience in maintenence,repair,calibrating and installing of electrical,electronic and pnuematic equipment.

Mechanical Engineer with manufacturing experience

I am an electrical engineer. its been 3 years then when i start practicing my profession.my first year of experience was as a machine technician in manufacturing company.after that ,until now i am working on power plant construction as an intrumentation and control engineer.

BSc Degree in Geological Engineering with 3 years experience in both exploration and mining. Good knowledge in Surpac and MapInfo with discover. I am a good team player with the ability to innovate and motivate.

Self motivated geophysicist engineer with knowledge in Petrophysics and seismic business.

master degree of earth science, no experience, very very motivated to start a geological career!!!

Detail oriented with the ability to multi-task. Knowledge in Windows Application such as MS Office, Staad Pro and AutoCAD. Good communication skills

Looking for a Position to futher my skills in Sandblasting and Painting

Having 6 years experience on Instrumentation and Fire & Gas department in Oil & Gas, refinery,chemical plants on large scale integrated Distributed Digital Control Systems and Pneumatics / Motorized / Electronics and SMART series of field instruments in new projects and Maintenance.

NDT Technician

6 years undergound experience doing all jobs from moving supplies to drilling and blasting. Most of my experience is bolting with jackleg and stoper as I have been doing it for 5 years.

Complete maintenance of electrical, electronics and instrumentation:-

RHCE, CCNA

Instrumentation design engineer oil and gas

More than two years experience in process engineer

An astute professional with over 3 years experience and nearly 2 years in the areas of Maintenance Management, Planning and Scheduling and MAXIMO 5.2 Implementation

My expertise includes strong hands on technical skills with offshore survey and construction, maintenance and system interfacing. I am highly skilled in system maintenance, further I have proven the ability to manage projects too

I have completed a 4yr bachelor of mining engineering at the University of Queensland, St Lucia campus. Through my vacation and graduate work I have worked as a drill and blast engineer, scheduling engineer and completed field experience as a haul truck operator and blast crew.

32 years Oil Industy experience in Drilling Fluids / waste Manging / Cementing / Drilling Engineering / Business Develeopment / Project Management. Degree. experience of Cpld weatehr, HTHO, deep water, H2S wells.

Graduate of B.S. Instrumentation and Control Engineering, Computer Literate, with background in Engineering Software such as INtools (Instrument Index Module, Specification Module, Wiring Module, Browser Module and Administration part), 2D AutoCAD and Microstation, Smart Plant P&ID and earned knowle

I had completed my graduation in Mining Engineering from University of Engineering & Technology Lahore (Pakistan) in December 1981. I started my career as Assistant Manager (Mining) in June, 1982 when my services were hired by State Cement Corporation of Pakistan.

Worked in a mining company as plant superintendent responsible for the overall operations.

Geologist

I am an Instrument & Control Engineering with 3 years of experience in construction of oil & gas plants & 1 year of sales & marketing for industrial automation products

Petroleum engineer

Mechanical Engineering , Plant Maintenence, SAP R3 PM Module, Condition Monitoring, Operations and maintenance

Machinist manual 10plust years exp.

Diploma general nursing (midwifery,community nursing,psychiatry),Diploma in occupational health nursing,SAMTRAC

Senior project engineer with honeywell automation india limited having experience of working with most data transfer protocol like modbus, hart, field bus, ethernet, rs232,and having good experience of DCS and PLC systems.

Diploma Applied Chemistry 1.Sampling and Analysis of water samples for the environmental pollution monitoring and treated water quality on AAS, UV -Vis Spectrophotometer, Flame photometer. 2.Carbon-14 and Tritium (Isotopes) Analysis on computerized Liquid Scintillation Analyzer. 3.Ordering and stoc

Safety or hse officer,4.5yrs exp

Mechanical Engineer with manufacturing experience

Design engineer

I am a Chemical and Process Engineer. I speak English and French. I am based in Central Africa (Cameroon). I have experiences in Water treatment, Various food process and Chemicals process. I have experiences in Logistics, and Sales.

five years experience as a field technician in oil and gas industry

To acquire position of Production Stimulation/ Reservoir Stimulation

Hi I am an engineer with instrumentation as specility and also i have don 3 year diploma in electrical engg . I have total of 8 year of experiance in oil filed construction plus in maintanence an in quality control

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Installation of both computer hardwares and softwares. Knowledgeable in LAN/WAN configuration and troubleshooting. DSL and WiFi connections and configurations. Familiar with all types of Windows-based operating system.

10 years Heavy/Deisel Equipment Mechanic, Mining Experience, Shop Supervisor, Drill Maintenance

hard worker, work under pressure, creative, learning fast, energetic, have 3 languages:(arabic native language, english perfect, french good)

Advanced Landman focused on client's needs and demands.

Civil engineer from India , Now i am working in oman since 2007 , feb . I want a site engineers jobs in australia .For that i need employer sponsored visa.

Oil Executive

Riview contract, Claim of insurance, Invoicing , Claim od additional and variation works, Count the Quantity progress.

Procurement Engineer

Broadening experience leading to Project Manager and Executive/Board Level opportunities.

Microbiologist

I have done my Masters degree and P.hd in Geology, I have been working in the field of Watershed Hydrology and have an experience of hilly watersheds in Himalayas of North India and forested watershed of South India.

Shift supervisor at worlds largest butane to maleic anhydride facility. Qualified in all assignments including control room and field.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 [ 130 ] 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out